Snow Leopard and Airport express speed

I have three macs connected to the internet with Airport Express in 802.11b/g mode using a fast 20Mb cable connection. Two of the machines run leopard 10.5.8, including my main machine (an Intel Power Mac) which manages the airport network. A new imac runs Snow Leopard. Whenever the iMac is running the internet slows down to a crawl on the 2 machines running 10.5.8. but seems pretty ok on the iMac. It's as if the iMac is hogging the bandwidth. Could this be a Snow Leopard vs Leopard issue? Never used to have this issue before we purchased the iMac. Or should I bite the bullet and upgrade to a newer Airport Express or Extreme running 802.11n. Any thoughts very welcome.

What about Internet speeds - do you see any difference in speeds to say the servers at speedtest.net?
There can be a variety of reasons for the results you see with iTunes and TC other than the updates; TC transfers will normally vary in speed depending on the state of the disk, and iTunes may be processing items in the background.

Similar Messages

Streaming music from iTunes 09 (Snow Leopard) to AirPort Express

Hi! I'm an elementary music teacher who travels to several schools. To make my life simpler, I set up airport express base express stations in my schools. This way, I don't have to worry about plugging and unplugging cables and running cables all over the room. Until my update to Snow Leopard and iTunes 9, this worked flawlessly! Now, I have major audio problems! I end up changing the channel and updating on my basestations, and that only solves the problem sometimes. On an "unofficial" Apple forum I found a post that mentions selecting "Multiple Speakers" to solve the problem, by streaming the music as well as playing it through the speakers on my MacBook Pro. Again, it only helps sometimes. Does anyone have a work around? I spoke with Apple Tech Support a few nights ago. They had me reset the PRAM and some other things, but that didn't help either. I don't suppose there's a way I could get iTunes 8 back on my machine either... Any help or suggestions anyone has would be greatly appreciated! Also, is there some way to let APple know directly this is a problem that they need to get an update to fix?
Thanks!
Paul

it doesn't work with mp3 either ...
i can't stream music from my iMac G5 (10.5.8, iTunes 10.2.1) and from my macbook pro (10.6.7., iTunes 10.2.1). I tryed two diffrent Airport Express Stations, both reseted just to be sure and non of them can't connect with iTunes. iTunes tries to connect and after several minutes it just gives up.
Airplay via iPhone works !

Snow Leopard and Airport...not doing so well altogether.

I upgraded from 10.5.6 or whatever it was in June when I left...when I came back my internet was dropping a little bit here and there...and when I upgraded to Snow Leopard and the install and reboot was all over, Airport dropped my internet so quickly. Rebooted my computer, reinstalled snow leopard, turned off airport, changed the IP, I believe I did everything I could to do get the internet to work.
Right now is weird because this is one of the times where it dropped, maintained, dropped and maintained again. As Im speaking it just dropped...and came back up. Im so sick of this. My sister doesnt have the same problem at all. ****! She can get on to the cisco clean access agent, and snow leopard isnt compatabile with that yet so I cant get on to the internet at school. I dont care about the internet at school..I need the internet at home more than at school.
So in short, can you guys tell me what steps to do that will get my internet to drop less..to mainly be like my sisters where she isnt ******** about it 24/7. She does NOT have Snow Leopard but 10.5.6 OSX or whatever it is now. A key note is that I dont have my OSX install cd's from the original 10.5.2 when I got my MBP, and I didnt set up time machine before I redid it. So Im stuck with this new OS. And you might say its the router or whatever but I swear to god its not, its my computer. I just need to know what I can do that can get my internet so it doesnt drop!!! Thanks guys!

I have a Mini and am experiencing the same. Started with wireless dropping every 20 minutes or so. Then it couldn't find signal so I moved my Time Capsule closer. I'm watching my transmit rate drop every few minutes from 58, then 24, then 18, then 12, now 1. The icon in the status menu doesn't change though. According to that icon I'm getting 4 full bars of signal. If I Option+right click then I see that I'm only at 1

Printer not working with Leopard and Airport Express

Hello!
I have seen that this is a common problem but I've tried several solutions that seemed to work for others but still not for me.
I have a Macbook Pro unibody and airport express with OS X 10.5.6. I used a Samsung CLP-300 wirelessly though my airport express (with Tiger on my older macbook). The printer works fine when it is plugged into my USB on the Macbook but not on the airport.
Here is what I've tried in the past 8 months:
- update the Samsung printer driver
- used "fixairport"
- configured HP IP with airport local address
- spent 2 hours on the phone with apple
None of this seemed to work. The printer will print the first page and then any subsequent pages it gives me an error host message.
If anyone can give me an idea of what did work for them in this situation, or maybe I'm doing something wrong, please let me know. It would be greatly appreciated.
Steph

kelscan, Welcome to the discussion area!
You need to reconfigure your AirPort Express (AX) so that it joins the wireless network provided by the "modem". Follow the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Canon IP4300 utility unavailable in Snow Leopard (via airport express)

Hello,
I´ve tried to install my Canon IP4300 trough Airport Express in Snow Leopard. It ´s recognized by Airport Utility and it is listed in the Print & Fax panel of System Preferences. It prints the test page without problems.
However i´m unable to access the Printer Utility (from the options & supplies tab in the printer preferences panel) when connected through Airport Express. The printer isn´t listed neither in the USB nor in the Network options in the drop down list.
I´ve tried to connect the printer directly to my mac via USB and everything works as expected. I have access to the Printer Utility as it appears listed under the USB dropdown selection in the Utility tab.
But how do i access it trough Airpot Express? Should n´t it be listed under the Network in the Utility tab? (This is used to clean the printer´s head/noozles and to perform other maintenance operations).
I´m using the latest drivers available from Canon (USA):10.26.0.0
Thank you.
Message was edited by: PixelStorm

Hello and welcome to Apple Discussions.
The inability to open the Printer Utility for a printer when connected to the USB port of an Airport device, such as Express, is a known limitation and documented by Apple in these articles.
http://support.apple.com/kb/TS1253
http://support.apple.com/kb/TA21187?viewlocale=en_US
Pahu

Snow Leopard and SDM express card eSata

SDM express card eSata don´t work after Snow Leopard install. Does any know how to solve this, driver update anywhere?

Well, I found some answers for the topic here:
http://discussions.apple.com/thread.jspa?messageID=10109460&#10109460

IP Address Conflicts - iMac and Airport Express, Snow Leopard and Mountain Lion

In our home we have an iMac, two Mac notebooks, an iPad, an Apple TV and a Sony Playstation that all use wi-fi. I have a recurring problem. When several devices are connected to the Internet through Airport Extreme (wi-fi) downloads really slow down. Since the Airport Extreme is connected directly to a Motorola cable modem that also has wi-fi, I often shift my iMac wi-fi connection to the Motorola cable modem to speed up the Internet. Lately I have been getting an IP address conflict message in a pop-up box when I shift to the cable modem wi-fi. The system preference shows the IP address automatically assigned via DCHP. It also offers the option of DHCP plus manual.
I am now using Snow Leopard and intend to upgrade to Mountain Lion.
How can I resolve the conflict? Or, should I consider some other wifi network configuration? Is the upgrade to Mountain Lion likely to resolve the problem or make it worse? Can I use the DHCP plus manual to manually assign an IP address to the iMac to resolve the IP address conflict, and, if so, what it the procedure?

Is the DHCP assignment being done by your cable modem or your AirPort Extreme?
What is the exact text of the conlict message, and where does it pop up?
If your cable modem and your AirPort Extreme are both running DHCP servers for the same subnet (which they really should not be allowed to do), they must be set to assign addresses from disjoint pools.

My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:     iMac   Model Identifier:     iMac4,1   Processor Name:     Intel Core Duo   Processor Speed:     2 GHz

My early (white plastic) 2006 imac freezes. I'm running Snow Leopard and have formatted and reinstalled the software 3 or 4 times.   Model Name:          iMac
Model Identifier:          iMac4,1
Processor Name:          Intel Core Duo
Processor Speed:          2 GHz
Until I installed the SMC FanControl application my screen would "break up" into strange patterns and then would eventually freeze. Please help.

If you are trying to upgrade using a gray-faced OS X disk from another system, that won't work, as those disks are locked to the system types they are delivered with. You'll need to drop the $29 on a retail copy of Snow Leopard, which is available from the Apple online store. Note Snow Leopard requires 1GB minimum, and you may want at least 2GB for better performance.

Upgraded to Mac OS X Snow Leopard and final cut express 4 will not work

upgraded to Mac OS X Snow Leopard and final cut express 4 will not launch but my final cut express HD 3.0 version comes up. I reinstall my final cut express 4 upgrade disc and it still will not launch.
Where do I go from here?

You installed from the discs, right?
What happens when you try to launch? What are you doing to launch and what happens you do it? Can't see you computer from here. If you probably need to contact Apple with an installation issue on a new computer.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

Help - upgrading from Tiger to Snow Leopard AND new larger hard drive, MBP

Howdy!
My iPhone has finally demanded that I upgrade my MBP from Tiger. And as if by coincidence, my now puny 100GB internal drive is packed full with less than a gig free most of the time. (10% free is the MINIMUM free allowance, I know!!) I run old copies of Adobe CS2, Quark, Quickbooks, Microsoft Office... would love to keep them working without purchasing upgrades, but probably isn't a realistic hope. None of it is mission critical at this point.
So I've purchased the $29 Snow Leopard DVD (from a reseller - it says CPU Drop-In DVD Version 10.6 on the disk), and a new 750GB internal drive (same reseller - The drive is a 2.5" SATA 5400RPM 8MB-Buffer Hard Drive (9MM Slim) (RoHS Green Friendly)), to get with the times.
My other resources include:
- two 1TB LaCie external drives with FW and USB2 ports
- one other LaCie external drive - I think 360GB?
- Retrospect 5.0 (most of my backups are encrypted Retrospect files on those three LaCie external drives, but there's some room on them)
- a $22 USB 2.0 to SATA/IDE adapter with AC power, to access whatever laptop drive might be without an enclosure temporarily
- a copy of Carbon Copy Cloner software
- I just ordered an upgrade to my ancient (OS9) copy of DiskWarrior
- A monster UPS battery backup and line conditioner that everything plugs into for this process
It has been a long time since I've DIY'd any undertaking this complex, and I'm looking for advice on what to do first, how to go about this.
Here's my setup:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
I'm guessing I should do it like this, PLEASE EDIT or make suggestions or tell me what I forgot to do before I do it!!
1. Back up everything to at least two external locations! Also, make a bootable copy of my current internal drive in its own volume, to at least one external drive that is formatted in HFS+ GUID partition style, with Carbon Copy Cloner (would Retrospect work well for this instead?).
2. Free up at least 20GB on the current internal drive (100GB). Hopefully 30GB.
3. Run Disk Utility on the current internal drive. Fix any problems. (Should I hit it with DiskWarrior instead?)
4. Format the new 750GB drive to HFS+, GUID partitions. (How long will that take? Can I do it with the USB-SATA cable adapter, sitting on my desk, or does it have to be in an enclosure? The adapter has AC power)
5. Run Disk Utility (or DiskWarrior?) on the new internal drive in its temporarily external position. Fix any problems.
6. Boot off the Snow Leopard CPU Drop-In DVD and install onto both drives. (Will this version of the DVD I have wipe all files when it installs to a disk???)
7. See how they run. Boot off the old 100GB internal drive, boot off the new to-be-internal 750GB drive. Panic if it's not going well.
8. If the current internal 100GB drive is rocking Snow Leopard and my familiar files and apps seem somewhat functional, use Carbon Copy Cloner to recreate the volume on the new larger drive. Then swap the drives physically. (Links to good step-by-step instructions on this part would be much appreciated here!!)
9. If the Snow Leopard DVD overwrote or snuffed out my familiar files and apps on the old internal drive, sigh deeply, then swap the drives physically. Use CCC (or Retrospect? or Migration Assistant?) to fetch my junk from the old internal drive's backup and plunk it on the new bigger internal drive (now installed).
10. See how it runs. Shake my fist at the sky over the planned obsolescence of technology paired with the seductive power of my iPhone. Grumpily upgrade the software that I actually create income with.
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
Thanks!

Howdy slowpoke43, and a warm welcome to the forums!
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
LOL, if your faking it you're the best!
1. Yes, absolutely... no CCC would be best in my experience/opinion.
2. Yes, the more he better... Free Space is no longer our Free Space, but OSX's.
3. Indeed, & if you have the correct version of DW, do that.
4. Yes, not long, A/C power is great.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
6. Yes, boot off the 10.6 DVD, & no Snow Leopard does by default what we used to call an Archive & Install, saves & updates all your info, APPs, Music, etc., it may quarantine a few things or not but will tell you.
7. Absolutely, but Panic won't be needed with your great preparation & Bootable Backups!
8. Not quite sure I understand, but run SL for a few days before you do anything.
9. Yeah, but again with you doing everything right from the gitgo, I can't picture that happening.
10. Yes indeed, the hangup with yours is that it only holds 2GB of RAM... a pain in 10.5 & up IME.
Again let me say... GONGRATS, I've never ever seen anybody so well prepared & informed despite your diffidence!

External hard drive Snow Leopard and Lion compatibility?

I am going to install Snow Leopard on my Mac (so I can then purchase Lion and install THAT into my Mac) but it only has 975 mb of memory left. So, I've decided that I need to purchase an external hard drive so that I can transfer some videos, songs, etc. to create more space on my Mac. My question is, what external hard drive will be compatible with Snow Leopard and Lion? I was going to purchase a Western Digital external but I've heard many problems of it being incompatible with Lion. What's a reliable and compatible brand that I could purchase? I'm looking for an external hard drive that hold at least 500 gb.

I think your analysis is kind of harsh, kurt.
'garbage'? really?
Sure, some familiar paradigms have changed, and change brings pain - or at least, unfamiliarity - but that doesn't necessarily mean they're bad.
Of all the changes you mention three things that you consider abominations...
UI changes more in line with iOS. Sure, and this is bad because...?
It's clear that Apple see the iOS as the future, and it makes sense to unify the experience - at least where it makes sense. You don't actually mention which elements you consider bad, BTW.
The scrolling seems to be the one most often cited, but to me it makes way more sense to manipulate the document directly, rather than manipulate a scroll bar that works inversely. I'm not sure what other UI elements you're concerned about.
As for the Save As... issue, the change to Duplicate makes a lot of sense when you understand the concept of automatic file saving and versioning. There's never a need to 'save as' in order to create a point-in-time backup since you automatically get point-in-time backups just by using the OS. The only reason it makes sense to to force a branch and for that, 'duplicate' makes sense. If it bothers you, just read 'duplicate' as 'save as'.
The big break here is that versioning requires application support - the developer needs to add it to their app code - and that creates inconsistencies in the short term because not all apps support versioning. That will fix in time as developers release updates to their apps.
As for bugs, the current release is 10.7.2, so that's two revisions past the original. Any major release (of any applications, not just an OS) is going to have some number of issues and some people avoid any .0 release just for that reason. I think the concensus is that by the time you get to .2 most of the issues have been resolved. Can you point to any bug in 10.7.2 that directly affects you and your use of the OS? or are you basing your statements on outdated material?
In short, every major OS release, from every OS vendor has some number of changes that confuse and upset users, and some number of short-term pain while application developers and users get up to speed. Lion is no different in that respect, and if you look back in history you'll see the exact same sentiment for Snow Leopard's release, and Leopard's, and Tiger's, and..., and..., and...
To call it garbage, though? I think not.

Is there a limit to the number of airport extremes and airport expresses one should have in a network?

Is there a practical limit to the number of airport extreme base stations and airport express units one should have in a home network?

Then, I had an older Airport extreme that I was thinking about connecting wirelessly in my living room and connecting the DirectV DVR to it by ethernet cable.
Is this older AirPort Extreme the "round" version or the "square" shaped version? The "round" version will not do what you want.
Whenever you extend an AirPort using wireless only, you will experience a loss of bandwidth (speed) on the entire network. That loss might be anywhere from 15-50% depending on how far the extending AirPort device is located from the "main" AirPort.
Even with an excellent signal, if you have 3 AirPorts extending the signal, you will lose 40-50% of the bandwidth on the network. The other AirPorts that are being used just for music are also slowing things down.
He thought there might be problems with using that third airport with the DVR and wondered if I should just use an Airport express there.
It would make no difference whether you used an AirPort Extreme....assuming it was the "square" version or a new AirPort Express as far as performance is concerned.
As to whether you connect the DVR to another AirPort, it might be OK, but you will not know until you try.
If you find that things slow down noticeably, you will need to look for ways to connect the AirPorts together using a wired Ethernet connection. This is always the preferred connection method since there is no bandwidth loss when you do this.
Since downloading video places a high demand on a wireless network, you might want to look for a way to connect the DVR back to your "main" router directly using a wired Ethernet connection as well.

I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.

I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.

As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help.

Snow Leopard and Airport express speed

Similar Messages

Maybe you are looking for