Snow Leopard and Airport...not doing so well altogether.

I upgraded from 10.5.6 or whatever it was in June when I left...when I came back my internet was dropping a little bit here and there...and when I upgraded to Snow Leopard and the install and reboot was all over, Airport dropped my internet so quickly. Rebooted my computer, reinstalled snow leopard, turned off airport, changed the IP, I believe I did everything I could to do get the internet to work.
Right now is weird because this is one of the times where it dropped, maintained, dropped and maintained again. As Im speaking it just dropped...and came back up. Im so sick of this. My sister doesnt have the same problem at all. ****! She can get on to the cisco clean access agent, and snow leopard isnt compatabile with that yet so I cant get on to the internet at school. I dont care about the internet at school..I need the internet at home more than at school.
So in short, can you guys tell me what steps to do that will get my internet to drop less..to mainly be like my sisters where she isnt ******** about it 24/7. She does NOT have Snow Leopard but 10.5.6 OSX or whatever it is now. A key note is that I dont have my OSX install cd's from the original 10.5.2 when I got my MBP, and I didnt set up time machine before I redid it. So Im stuck with this new OS. And you might say its the router or whatever but I swear to god its not, its my computer. I just need to know what I can do that can get my internet so it doesnt drop!!! Thanks guys!

I have a Mini and am experiencing the same. Started with wireless dropping every 20 minutes or so. Then it couldn't find signal so I moved my Time Capsule closer. I'm watching my transmit rate drop every few minutes from 58, then 24, then 18, then 12, now 1. The icon in the status menu doesn't change though. According to that icon I'm getting 4 full bars of signal. If I Option+right click then I see that I'm only at 1

Similar Messages

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

I used Roxio VHS to DVD for Mac (have iMac with Snow Leopard) and the audio does not synch with the video when playing in iMovie. Any suggestions to fix?

Thanks for the reply. I tried playing with detaching the audio in iMovie, but with 20+ hours of video to correct, it would take too long. After 28 hours, Corel/Roxio tech support replied that it is a known bitrate mismatch problem and they have no real fix. I strongly suggest not to buy this product.

Snow Leopard and Appleworks not working well together ...

Still a dedicated fan of Appleworks mostly because I use the vector drawing program for my design business. But, even though it works in OSX.6, it is much changed. The drag-drop images from web sites print out in dot-matrix quality. Every clicked on object becomes a "grouped picture". Therefore the object has to be ungrouped and then regrouped. The resize and rotate tools don't work. If there were other great drawing programs out there I would consider them, but I am considering going back to OSX.5. Also finding that some web sites don't like OSX.6 with Safari and my HP printers have terrible quality now and HP will not support Snow Leopard and older printers. Any other Appleworks users having problems? Thanks.

Welcome to Apple Discussions
Whenever you do an update, it's a good idea to do two maintenance tasks, one for the system (Repair Permissions) and one for AppleWorks (delete preferences). (Thanks to Barry for this way to format this very common answer.)
To Repair permissions, launch Disk Utility, found in the Utilities folder in your Applications folder, click on First Aid, then on Repair Permissions.
To delete AppleWorks’ preference files, go to HD > Users > (your account) > Library > Preferences. Find and delete the file com.apple.appleworks.plist. Find and open the folder AppleWorks in this Preferences folder, then delete all of the enclosed files (with the exception of the Button Bar Preferences if you have customized the Button Bars). AppleWorks will recreate the preference files as it needs them. You should also do this every time AppleWorks crashes as each crash will cause some corruption of the preferences. This may fix the resize & rotate issues.
AppleWorks changes the resolution of all graphic formats except PICT to 72 dpi. There are a couple of things you can do improve the print quality of images.
1. Turn on Fractional Character widths in Preferences > General > Topic: Text. This is a text setting, but it does improve the print quality of images.
2. Open the image in Preview or GraphicConverter & Save As... a PICT to use in AppleWorks.
PICT is generally the best format to use for inserting or pasting into AppleWorks. I find the resulting graphic can be resized somewhat & the resulting saved AW file is much smaller than if using JPEG or TIFF.

Dual Boot with Snow Leopard and Mavericks not possible?

I have a Early 2011 Macbook Pro with 2,3 GHz i7 Quad and two 512 GB SSDs (the secondary disk in an optical drive bay enclosure). This Macbook Pro can run Snow Leopard and Mavericks on the primary disk without problems. When I try to set up a dual boot system however, problems appear and it looks like it is not possible. When I start from Snow Leopard, I cannot select Mavericks as a start volume and vice versa. The error message says something like "Bless tool" cannot use this disk, i.e. unmount and boot from it. The problem remains when I exchange the disks (putting the primary disk in the drive enclosure and vice versa). When I put the secondary drive in an external case however, it is possible to boot from it - but strange things happen when the system starts: My computer clock is reset to 1/1/2001, WiFI passwords are not remembered for more than one session, disk permissions are reported as "repaired" but do apear as not repaired when I check them again - and other issues). I have verified both disks already and repaired permissions but that does not change the situation. So my experience is different from what is said in https://discussions.apple.com/thread/566781. It looks like the latest Mavericks cannot coexist with Snow Leopard on neiter a secondary internal drive nor on an external drive. This is strange since both disks and systems work flawless when run alone. Any suggestions to solve this problem?

When I check the Mavericks disk in the optical drive with disk utility after booting / running Snow Leopard on the primary disk I get som errors, see below ("disk utility Info"). So after all, I decided to erase the disk and install Mavericks new. But even erasing the disk is not possible when it is in the optical drive enclosure. I get this error message:
"Volume Erase failed with the error:
Could not unmount disk"
When I put this disk into an external case connected via USB however, it starts and runds MAvericks without any Problem. Same happens when I put thie Mavericks disk into the internal primary hard disk place.
"disk utility Info" when verinfying the secondary drive in the oprical bay:
Verifying volume “Samsung SSD Daten”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Unused node is not erased (node = 40)
Checking catalog file.
Unused node is not erased (node = 30)
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Unused node is not erased (node = 8)
Checking volume bitmap.
Volume bitmap needs minor repair for orphaned blocks
Checking volume information.
The volume Samsung SSD Daten was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “Samsung SSD Daten”
Error: Could not unmount disk

I recently upgraded from Snow Leopard to Lion and now some CDs I use for school do not work. Can I create a partition to run both Snow Leopard and LIon or does it only work to run windows? How do I do this?

Getting a new CD from publisher is not an option as they would want me to pay for a new one and they are pricey. If possible I would prefer to keep my upgrade to lion but would go back to leopard if there's no other option.

You can add another partition on which you can install Snow Leopard. If you do, however, you cannot use Boot Camp Assistant to install Windows. Just so you know.
To resize the drive do the following:
1. Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
After the main menu appears select Disk Utility and click on the Continue button. Select the hard drive's main entry then click on the Partition tab in the DU main window.
2. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.
Boot from your Snow Leopard DVD and install on the volume you just created. Be sure you set the new partition as the target for your Snow Leopard system.

Snow Leopard and Airport express speed

I have three macs connected to the internet with Airport Express in 802.11b/g mode using a fast 20Mb cable connection. Two of the machines run leopard 10.5.8, including my main machine (an Intel Power Mac) which manages the airport network. A new imac runs Snow Leopard. Whenever the iMac is running the internet slows down to a crawl on the 2 machines running 10.5.8. but seems pretty ok on the iMac. It's as if the iMac is hogging the bandwidth. Could this be a Snow Leopard vs Leopard issue? Never used to have this issue before we purchased the iMac. Or should I bite the bullet and upgrade to a newer Airport Express or Extreme running 802.11n. Any thoughts very welcome.

What about Internet speeds - do you see any difference in speeds to say the servers at speedtest.net?
There can be a variety of reasons for the results you see with iTunes and TC other than the updates; TC transfers will normally vary in speed depending on the state of the disk, and iTunes may be processing items in the background.

Updated To Snow Leopard And Now Not RecogNizing Admin and password

Did a search, but didn't find the same thing(Just new system not SAVING passwords).
I updated from 10.5.8 to 10.6.1. First off, many apps wouldn't open(Spinning ball), and when going to update the OSX further, the admin/password screen popped up, with no admin name, as well as no password. When inputting info, it says they're incorrect. I double-checked my account info, and it's just not recognizing me. I hesitate to do a fresh install because of the time it will take with all the apps to re-install(Plus I wiped HD 2 weeks ago). Any suggestions are appreciated.

Since this happened after installation, this forum seemed appropriate. However, after looking around more, found that a number of people(Although the minority)are having the same problem, and are talking in account and login, so off I go.

Presently have Snow Leopard and want to upgrade to Maverick but don't want to lose data. How to download safely? don't am worried about losing info. How to download it without risk to current data.

Am currently using Snow Leopard and do not have access to I Cloud or latest version of I Photo. Understand I can download Maverick free but am worried about losing data. How to download Maverick and safeguard present files?

Mac OS X upgrades are designed so that none of your existing Applications or User data are intentionally deleted during a System Upgrade.
That works as long as there are no problems whatsoever.
Your best protection from data loss is good Backups. Before you upgrade, buy an External Drive at least 2 to 3 times the size of your User Data, and Turn on Time Machine. USB-2 enclosure drives are cheap, and fast enough for backups. If you will use this drive for everyday data, a faster interface would be much better.
Time Machine works quietly in the background, and does not "take over" your Mac to do the Backups. After the first large backup, it will quietly back up hourly, copying only the things that have changed since the last Backup. Time Machine is not the only Backup solution, or even the best solution out there. But it tends to be the Backup that actually happens, because you don't have to download any software, do extensive setup, or think about whether you should do it now or later.

Issues with OSX snow leopard and quicktime

I recently installed snow leopard and quicktime x does not play avi files. I've tried the perian patch but it won't install on my computer. Everything goes accordingly but when I go to the perian pref panel it says not installed. I click the manual install button and nothing happens. Any ideas?

Remove the Perian prefPane from /Library/PreferencePanes/, download the latest version, and try installing it. If still no go, try VLC.

Am using Macbook pro mid 2010 running on OSX 10.9.5. It does not read my old Seagate back up plus ITB ext hard disk which opens and works on snow leopard. The back ups were made on snow leopard and mountain lion. How do I make it work on Mavericks?

I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

Macbook pro snow leopard 10.6.3 does not boot up. I get a grey screen and a pop up to restart computer

Snow leopard 10.6.3 does not boot up. Macbook pro. When I push the start button I hear a chime and then the apple logo shows up and the spinnings circle. In a little while a grey screen comes on and after that a pop up telling me to shut down and restart my computer.I have done that andit still does not work. How do I fix it.?
richardfromfort pierce

richardfromfortpierce,
do you or don’t you have your MacBook Pro’s original grey installation DVDs?
If your MacBook Pro is a 2007 model, then Mac OS X 10.6.3 was not installed onto your MacBook Pro from its grey installation DVDs, but rather from a white Snow Leopard DVD. The white Snow Leopard DVD does not have any Apple Hardware Test; to run your Apple Hardware Test, you will need the grey installation DVDs which originally came with your MacBook Pro when it was new. If you no longer have those grey discs, you can contact Apple directly and purchase a replacement pair. (They’re not available in the Apple stores.)

Mac has snow leopard and does not boot has grey screen

IMac has snow leopard and does not boot has grey screen

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

I upgraded to Snow Leopard and and lost addresses in address book. When I go to Time Machine it does not refill my addresses. Also told that Address Book 4.1.2 can not be run? How do I get my address book back up and running?

I upgraded to Snow Leopard and lost addresses in Address Book. I'm told I have 4.1.2 and can't use this version. I still have my addresses in Time Machine and it will not recover. How do I update Address Book?

Ooops!
First Timer mistake.
Sorry.

Just upgraded to snow leopard and my intellipoint mouse doesn't work, does it not work with the later versions of the OS

I just upgraded to snow leopard and now my intellipoint mouse doesn't work, I tried downloading a new driver and it installs successfully except an extension but it still doesn't work, is this typical of the OS higher than 10.4? Is there any way I can get around this problem?

You need to check with the mouse's developer and see if it's supported or not. That information wouldn't be known by users on this forum.

I did a clean install of snow Leopard and now my iWork 09 will not work. does anyone one know where I can download the version for snow Leopard?

I did a clean install of Snow Leopard and now when I reloaded iWork 09 from my timemachine it will not open anything. any ideas.

iWork '09 is still available from the likes of Amazon.
Your experience is why I never trusted downloaded versions when there's a physical DVD available.
It may be possible to reactivate with your code, but I can't advise you as to how.

Snow Leopard and Airport...not doing so well altogether.

Similar Messages

Maybe you are looking for