Snow Leopard and Appleworks

I have several scrips I use that access Appleworks. Since installing Snow Leopard, Apple Script crashes when I try to run any of them. When I first opened AppleWorks after the OS update, it told me I had to install "Rosetta," which I did and AW now opens, but AS still crashes when I try to run any of the AW scripts.
Are there any suggestions out there? I have a copy of Numbers 09, which will I'm sure will work, and I have expected that someday I would be forced to switch over from AW. But, I would rather not have to do it just now as I have charts on AW and I have not been able to use Numbers to make anything close to them.

Ooops! I posted too soon. After my prior post, I tried to load the AW script again and it continued to cause Script Editor to crash. But, several of the other scripts that also used AW not only loaded into AS, but ran not only normally, but much faster. I finally determined that it was only the one script that crashed AS. I pulled a copy of that same script from my last backup and it loaded and ran fine. So, as of this moment, I am a happy camper and everything runs under Snow Leopard, AND, it runs noticeably faster. One particular script runs at least ten time faster, which is amazing.

Similar Messages

Snow Leopard and Appleworks not working well together ...

Still a dedicated fan of Appleworks mostly because I use the vector drawing program for my design business. But, even though it works in OSX.6, it is much changed. The drag-drop images from web sites print out in dot-matrix quality. Every clicked on object becomes a "grouped picture". Therefore the object has to be ungrouped and then regrouped. The resize and rotate tools don't work. If there were other great drawing programs out there I would consider them, but I am considering going back to OSX.5. Also finding that some web sites don't like OSX.6 with Safari and my HP printers have terrible quality now and HP will not support Snow Leopard and older printers. Any other Appleworks users having problems? Thanks.

Welcome to Apple Discussions
Whenever you do an update, it's a good idea to do two maintenance tasks, one for the system (Repair Permissions) and one for AppleWorks (delete preferences). (Thanks to Barry for this way to format this very common answer.)
To Repair permissions, launch Disk Utility, found in the Utilities folder in your Applications folder, click on First Aid, then on Repair Permissions.
To delete AppleWorks’ preference files, go to HD > Users > (your account) > Library > Preferences. Find and delete the file com.apple.appleworks.plist. Find and open the folder AppleWorks in this Preferences folder, then delete all of the enclosed files (with the exception of the Button Bar Preferences if you have customized the Button Bars). AppleWorks will recreate the preference files as it needs them. You should also do this every time AppleWorks crashes as each crash will cause some corruption of the preferences. This may fix the resize & rotate issues.
AppleWorks changes the resolution of all graphic formats except PICT to 72 dpi. There are a couple of things you can do improve the print quality of images.
1. Turn on Fractional Character widths in Preferences > General > Topic: Text. This is a text setting, but it does improve the print quality of images.
2. Open the image in Preview or GraphicConverter & Save As... a PICT to use in AppleWorks.
PICT is generally the best format to use for inserting or pasting into AppleWorks. I find the resulting graphic can be resized somewhat & the resulting saved AW file is much smaller than if using JPEG or TIFF.

Snow Leopard and AppleWorks 6.0

Will Snow Leopard work with unsupported AppleWorks 6.2.9 ??
I have many work database documents and don't want to upgrade to Snow Leopard if AppleWorks will not function. Thank You.
Message was edited by: Namm

My AppleWorks opens and I can create and 'sometimes' save documents.. It does crash occasionally. I wish Apple would have hurried up a little more with iWork and included all the original functionality that people got from AppleWorks, like the database for one. AppleWorks has been on life support for quite awhile now. Bento seems to be a good replacement for the database, though quite a bit more expensive comparatively.

Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
So here's my dilemma:
1. Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on the same "Fusion 5"?
2. Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
3. Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
Has anyone had any experience installing BOTH a previous (older) version of Apple OSX ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
OR
Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

mende1
Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
"Unlimited Client License"
It was around $25.50 (USD) with sales tax and shipping (NYS).
One thing though ... when you mention: "you should make two virtual machines".
Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
"two machines" (one for Snow Leopard and one for Windows 7)?

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on. The Tech told me to

I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion. Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine. Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer. I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs. Also the computer keeps freezing up when it is in the sleep mode, etc.
When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it. Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

Go to the  menu/About This Mac - what OS version shows there?
Do a backup, preferably 2 separate ones on 2 separate drives.
Revert to a Previous OS X
Revert to Snow Leopard
If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Am using Macbook pro mid 2010 running on OSX 10.9.5. It does not read my old Seagate back up plus ITB ext hard disk which opens and works on snow leopard. The back ups were made on snow leopard and mountain lion. How do I make it work on Mavericks?

I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

I just downloaded the latest version of Snow Leopard and now my iWeb won't open.

I just downloaded the latest version of Snow Leopard and now my iWeb won't open. Does anyone know how to fix it?

If wish an answer, additional information would be helpful.
Allan

I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open

I have updated to snow leopard and I cannot get iPhoto to work or find anywhere to download the appropriate version. I have 8.1.2 but it will not open. What do I need to do?

Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN

After updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

after updating an older intel macbook to Snow Leopard and ilife 11, Software Update says everything is up to date, but when I try to open iPhoto, it tells me I have to update to the latest version, what can I do?

Download 9.1 and 9.2.3 updates and install them

Hello, I just bought a Snow Leopard and I have tried ti install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.

Hello, I just bought a Snow Leopard and I have tried to install this on my macbook pro 2008 (10.5.8) and I can not do it. I have to erase the hard drive before in order to succeed. Please tell me step by step what to do. I appreciate very much your help.
Thanks

Here are the directions:
http://support.apple.com/kb/HT3910?viewlocale=en_US
Ciao.

!!!HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

HI, SO I BOUGHT MOUNTAIN LION ON MY MACBOOK PRO TRYING TO UPGRADE FROM SNOW LEOPARD, AND WHILE TRYING TO REINSTALL THE OS SETUP AS IT SHOWED IT COULDNT BE VERIFIED, I CROSSED OUT MOUNTAIN LION FROM MY PURCHASES, ITS NOW GONE, DO I HAVE TO BUY IT AGAIN?

Please google search for "Mountain Lion disk crash" before upgrading you mac pro. You might need to replace you Mac hard drive after the upgrade.So many people had the same problems including me.
Be aware of the Mountain Lion upgrade problem.

Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

Can I do a clean install of Lion, onto my Mac Book Pro4,1, that is currently running 10.5.8? I have seen U-tube videos on how to do a clean install to Snow Leopard, and another from SL to Lion, but can zero out my HD, and do a clean install to Lion?

See this article.

Is it possible to have both Snow Leopard and Lion at same time on one machine without creating a mess?

I currently use Snow Leopard because I like the way it preserves the operation of OS10 PPC programs. I have both an expensive CAD program and Adobe Photoshop CS3 which are PPC programs.
Can you launch your machine with Lion when you want to use that, and launch with Snow Leopard when you want that. Its too bad Lion does not support PPC OS10.

Absollutely. This is a very common practice whenever a new OS or OS update comes out. By far the best way to do what you want is to install Lion onto an external firewire 800 disk, then boot off it when you want to use Lion and boot off your iMac's internal disk when you want to use Snow Leopard. USB 2 will work, but firewire 800 will be faster.
The second best option is to partition your iMac's boot drive, then use one partition for Snow Leopard and the other for Lion, but be sure to back up your boot drive to an external disk drive before you partition it.
You can switch operating systems during a restart by holding down the option key.

Is there a way to share my Mail account and settings between two partitions, running Snow Leopard and Lion?

I have two partitions on my internal hard drive - one is running Mac OS X 10.6 Snow Leopard and the other is running Mac OS X 10.7 Lion. Mail (5.0) is set up and runs perfectly on the Lion partition and I have not used Mail (4.5) yet on my Snow Leopard partition. I want to know if I can read, download, and save mail into the same user Library folder (probably the Lion user library) from both partitions...

You usually set up your mail accounts on a specific e-mail client programs such as Mail in OS X and Mail on an iPad, which will access the same remote mail server to have your messages show up on each device. Mailboxes can be synced in this way between two devices.
An alternative is to use the same remote application such as Gmail to access that service from multiple devices, so a dedicated e-mail client like Mail is not needed, but the availability of these depends on the e-mail service being used.

Snow Leopard and Appleworks

Similar Messages

Maybe you are looking for