Snow Leopard and new HD

So I have an 08 MacBook..
I bought snow leopard and it wouldn't install..
I took it to apple and they said it was because my HD is going bad.
So I bought a new HD and now I am wondering..
Will the snow leopard disk work?
Because it is the upgrade disk would I need my original disk?
Another I was wondering is if I would be able to use my sisters disk.. She bought a MacBook about 2 months ago and it came with snow leopard.
Thanks for any help!!

If you bought the Snow Leopard disk as a retail disk from Apple, it will do a clean install - you don't need to use it as an upgrade. Once the HD is properly installed, you should be able to boot from the DVD, run Disk Utility from the Utilities menu, format the drive Mac OS Extended (Journaled) and then continue with the install.
Your sister's Macbook disks are actually less likely to work, since Mac-specific install disks don't usually work on other models.
Matt

Similar Messages

Help - upgrading from Tiger to Snow Leopard AND new larger hard drive, MBP

Howdy!
My iPhone has finally demanded that I upgrade my MBP from Tiger. And as if by coincidence, my now puny 100GB internal drive is packed full with less than a gig free most of the time. (10% free is the MINIMUM free allowance, I know!!) I run old copies of Adobe CS2, Quark, Quickbooks, Microsoft Office... would love to keep them working without purchasing upgrades, but probably isn't a realistic hope. None of it is mission critical at this point.
So I've purchased the $29 Snow Leopard DVD (from a reseller - it says CPU Drop-In DVD Version 10.6 on the disk), and a new 750GB internal drive (same reseller - The drive is a 2.5" SATA 5400RPM 8MB-Buffer Hard Drive (9MM Slim) (RoHS Green Friendly)), to get with the times.
My other resources include:
- two 1TB LaCie external drives with FW and USB2 ports
- one other LaCie external drive - I think 360GB?
- Retrospect 5.0 (most of my backups are encrypted Retrospect files on those three LaCie external drives, but there's some room on them)
- a $22 USB 2.0 to SATA/IDE adapter with AC power, to access whatever laptop drive might be without an enclosure temporarily
- a copy of Carbon Copy Cloner software
- I just ordered an upgrade to my ancient (OS9) copy of DiskWarrior
- A monster UPS battery backup and line conditioner that everything plugs into for this process
It has been a long time since I've DIY'd any undertaking this complex, and I'm looking for advice on what to do first, how to go about this.
Here's my setup:
Model Name: MacBook Pro 15"
Model Identifier: MacBookPro1,1
Processor Name: Intel Core Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per processor): 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP11.0055.B08
SMC Version: 1.2f10
I'm guessing I should do it like this, PLEASE EDIT or make suggestions or tell me what I forgot to do before I do it!!
1. Back up everything to at least two external locations! Also, make a bootable copy of my current internal drive in its own volume, to at least one external drive that is formatted in HFS+ GUID partition style, with Carbon Copy Cloner (would Retrospect work well for this instead?).
2. Free up at least 20GB on the current internal drive (100GB). Hopefully 30GB.
3. Run Disk Utility on the current internal drive. Fix any problems. (Should I hit it with DiskWarrior instead?)
4. Format the new 750GB drive to HFS+, GUID partitions. (How long will that take? Can I do it with the USB-SATA cable adapter, sitting on my desk, or does it have to be in an enclosure? The adapter has AC power)
5. Run Disk Utility (or DiskWarrior?) on the new internal drive in its temporarily external position. Fix any problems.
6. Boot off the Snow Leopard CPU Drop-In DVD and install onto both drives. (Will this version of the DVD I have wipe all files when it installs to a disk???)
7. See how they run. Boot off the old 100GB internal drive, boot off the new to-be-internal 750GB drive. Panic if it's not going well.
8. If the current internal 100GB drive is rocking Snow Leopard and my familiar files and apps seem somewhat functional, use Carbon Copy Cloner to recreate the volume on the new larger drive. Then swap the drives physically. (Links to good step-by-step instructions on this part would be much appreciated here!!)
9. If the Snow Leopard DVD overwrote or snuffed out my familiar files and apps on the old internal drive, sigh deeply, then swap the drives physically. Use CCC (or Retrospect? or Migration Assistant?) to fetch my junk from the old internal drive's backup and plunk it on the new bigger internal drive (now installed).
10. See how it runs. Shake my fist at the sky over the planned obsolescence of technology paired with the seductive power of my iPhone. Grumpily upgrade the software that I actually create income with.
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
Thanks!

Howdy slowpoke43, and a warm welcome to the forums!
Please help! I am just faking it here based on a few message boards I've read. Will this actually work properly?
LOL, if your faking it you're the best!
1. Yes, absolutely... no CCC would be best in my experience/opinion.
2. Yes, the more he better... Free Space is no longer our Free Space, but OSX's.
3. Indeed, & if you have the correct version of DW, do that.
4. Yes, not long, A/C power is great.
How to format your disks...
http://www.kenstone.net/fcphomepage/partitioningtiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://web.me.com/pondini/AppleTips/DU.html
6. Yes, boot off the 10.6 DVD, & no Snow Leopard does by default what we used to call an Archive & Install, saves & updates all your info, APPs, Music, etc., it may quarantine a few things or not but will tell you.
7. Absolutely, but Panic won't be needed with your great preparation & Bootable Backups!
8. Not quite sure I understand, but run SL for a few days before you do anything.
9. Yeah, but again with you doing everything right from the gitgo, I can't picture that happening.
10. Yes indeed, the hangup with yours is that it only holds 2GB of RAM... a pain in 10.5 & up IME.
Again let me say... GONGRATS, I've never ever seen anybody so well prepared & informed despite your diffidence!

Snow Leopard and new hard drive

I want to install a new hard drive in my MacBook and then restore from Time Machine. After I install the new hard drive do I have to reboot from the original OS X disk that came with my MacBook or can I just use the new Snow Leopard disk and restore from time machine?
If I can't reboot right from the Snow Leopard Disk would I have to restore from the original disk, then install Snow Leopard and then restore from time machine?

not sure where & how to start a conversation with you but here it is: bought a time capsule 2 weeks agao... tried to handle the whole thing by myself... however can't access hte message that says "which disk would you like to save your files too?" it just won't make that step... yet the green light is on... I did put snow leopard on... another thing don't see my time capsule in the finder left column??? any great ideas? can't wait to start with my TC... thnak you

NAS-based Time Machine, Snow Leopard and new backups

Hi all,
I have a new NAS server (Netgear ReadyNAS) and have configured my Snow Leopard MBP to use it for its Time Machine backups.
I create the first backup over gigabit ethernet, and subsequent backups occur over wifi.
This happens as normal for about a week or so, until the following error appears:
"Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you.”
So, twice now, I've duly plugged in my MBP and it starts a backup from scratch, copying the usual 450ishGB over onto my NAS. I then disconnect, and the backup works fine for a week or so, until the error appears again.
The only blogpost or help article I could find relating to this is here: http://www.garth.org/archives/2011,08,27,169,fix-time-machine-sparsebundle-nas-b ased-backup-errors.html but when I follow that process, I get the ultimate error:
"** The volume Time Machine Backups could not be repaired."
The backups are perfectly sound - I do a test restore of a random file daily - but this error is very annoying.
Any ideas as to how I could repair it? Or as to what might be going wrong on my backup volume?
Thanks,
Maritn

Let me know if is all ok.
Regards,
Giuseppe Pignataro

HOW DO I INSTALL DISK OF MY NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS . BUT I WORK ON OLD MAC 10.4.11 TIGER THAT DO HAVE DVD ACCESS . HOW DO I CONNECT NEW AND OLD TO MAKE IT WORK ? THANKS

HOW DO I INSTALL DISK OF NEW 10.6 SNOW LEOPARD ? NEW MAC DO NOT HAVE DVD ACCESS . BUT I WORK ON OLD MAC 10.4. TIGER THAT DO HAVE DVD PLAYER . I KNOW THAT SHOULD BE EAZY . THANKS

You'll need to provide some more information .... what current mac mini do you have? Click on the apple in the left corner of the menu bar, click about this mac, and what does it say for processor, memory, and os x version?
When you say you have no DVD, do you have the mac mini server or is the DVD broken?
You can't do anything with 10.6 Snow Leopard on a PowerPC mini, however, if it is an Intel-based mini, you could probably hook up the systems in target disk mode to install 10.6.

I just upgraded to Snow Leopard and a new imac. Could someone tell me where the preference is to have a file open in its original file format. Right now my illustrator eps are opening in preview.

I just upgraded to Snow Leopard and a new Imac. Could someone tell me where the preference is to change file to open in original program instead of preview?

Right-click on one of the files and choose 'get info'. in the info box. Change the 'open with' setting to your correct application. Check the 'always open with' option before OK-ing the change, then click the 'change all' button before closing the info window.
Typos edited by: noondaywitch

Trying to update iMac G5 with OS X Snow Leopard and unable due to no Intel proccesor. Are all new upgrades going to be unavailable? What is the last available upgrade?

I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor installed?
Thank you
Lindsay

Actually you can upgrade to snow leopard. I have an iMac G4 and upgraded to snow leopard by installing it using an external DVD RW drive. It was complicated but it worked. I ended up going back to using tiger though. I liked it better the simple old school way.

Re: New Garage Band - I have Mac OS X 10.6.8, Snow Leopard, and Garage Band 11. If I download/install the new GB, will I lose GB 11? And will it run on Snow Leopard?

Re: New Garage Band - I have Mac OS X 10.6.8, Snow Leopard, and Garage Band 11. If I download/install the new GB, will I lose GB 11? And will it run on Snow Leopard?

then had to find out (same as with this issue) that I presently have other software that will not run on Maverics.
You could create a clone of your drive with all your current software, so you could continue to work with your Snowleopard software by booting from the clone, and upgrade your main system to Mavericks, if your computer supports Mavericks. This way, you could have both, if the new features of Mavericks are interesting to you - e.g-, iCloud syncing of multiple Macs, new sharing features, and for GarageBand automatic drummers and arpeggiators.

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

Hi there ricalimo,
I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

I want to buy a new camcorder and don't know what to buy. I am running snow leopard and have imovie09

I need some advice on buying a new camcorder. I am running snow leopard and have imovie09.

will I be able to sync my music from computer to new iPod at no charge?
Yes, you will.

Installed Aperture with new Snow Leopard and it won't open

I just got Aperture 2.0 and it installed fine but when I tried to open the application, its says it does not work with this version of Leopard. Is there a fix for this?

ScharadL wrote:
So essentially, you'd have to purchase the 2.14 update from the mac store?
No. He's saying he used the serial number that came with 2.x when he bought it, and it will work with the 2.14 download.
There seems to be a catch 22: Aperture 2.1 won't work with Snow Leopard, and the 2.14 update won't work because it can't find 2.1. The work around Daniel found is to download the 2.14 trial then authorize it with the 2.1 serial number.
See if it works for you ,and let us know.
DLS

Can I install both Snow Leopard and Windows 7 on the same version of VMWare 5?

Even though I am running Apple OSX Mountain Lion 10.8.3 on my new 2013 iMac, I have just installed VMWare's "Fusion 5" so I can have Windows 7 installed on the "Fusion 5, for limited usage needs.
I also would like to have a running version of Snow Leopard available to run my large collection of original Lynda.com training DVD's and CD's ... which unfortunately, now only allow the Lynda.com GUI player to operate in (and up to) Snow Leopard (at least this is what the Tech folks at Lynda.com have told me).
Since Lynda.com is no longer producing any or their training programs on CD or DVD any longer, and because they have stopped supporting their training programs to run on Lion and above, I will have to have a version of Snow Leopard installed to run these training programs, and still be able to run them using the Lynda.com GUI player.
So here's my dilemma:
1. Can I install both a version of Snow Leopard OS on my "VMWare "Fusion 5" .... along with a running version of Windows 7 on the same "Fusion 5"?
2. Do I install only the Windows 7 on the VMWare, and find some other "device" to run a version of Snow Leopard off of?
3. Do I consider using "BootCamp", in conjunction with "Fusion 5", to get access to both Snow Leopard and Windows 7?
Has anyone had any experience installing BOTH a previous (older) version of Apple OSX ... AND ... a Windows OS version on one installed version of VMWare "Fusion"?
OR
Any suggestions on how to set up having access to both Snow Leopard and Windows 7 .... while keeping OS Mountain Lion as my main OS?

mende1
Thanks ... the "You have to purchase Snow Leopard Server" I knew about, and a few days ago I just ordered a copy from the Apple Store:
Snow Leopard Server - Ordered at: 1-800-692-7753 ... OR ... 1-866-254-8313
I asked for Apple Snow Leopard Server (Model MC588Z/A (SLSVR)
"Unlimited Client License"
It was around $25.50 (USD) with sales tax and shipping (NYS).
One thing though ... when you mention: "you should make two virtual machines".
Not being too familiar with "Fusion 5" yet, Is setting up "two machine" all done under one installed version of "Fusion 5"?
Would you have "links" to any "Fusion 5" installation instructions/info for setting up the
"two machines" (one for Snow Leopard and one for Windows 7)?

Am using Macbook pro mid 2010 running on OSX 10.9.5. It does not read my old Seagate back up plus ITB ext hard disk which opens and works on snow leopard. The back ups were made on snow leopard and mountain lion. How do I make it work on Mavericks?

I have been making back ups on a Seagate Back up plus drive on a macbook pro running on Mountain lion. Sadly the mac was stolen and all I had was the seagate back up. I tried opening it on my old iMac running on snow leopard and after several visits to this forum managed to open it. The data was safe and sound. Now I have received a hand me down macbook pro which runs on osx 10.9.5. I'm assuming there is a compatability issue as the drive does not come on at all when I hook it up to the usb port. I checked the seagate drive once again on the imac and its light came on on that system. Then I suspected there may be a problem with this macbook pro usb port. But it seemed to work fine when i hooked my camera cord into it. Is it that I must reinstall mavericks. In which case how do I back up before reformatting or reinstalling. BTW I did the command+ R thingy and repaired my internal Hard disc which was showing errors. What do I do next, your help is most appreciated if you have had a similar problem.

Your 2010 MBP would be able to handle Yosemite, but I would strongly suggest that you get the current problem sorted out before trying to upgrade to Yosemite. I'd also recommend another backup that isn't created by Time Machine if you are thinking of upgrading. SuperDuper and CarbonCopyCloner can make bootable clones of hard drives. If you clone your existing system to a fresh external drive, you would be able to boot from that drive and recover quickly in the event that your Yosemite upgrade didn't work out. Time Machine backups are not 100% reliable.
It's possible that, if your internal HD is the one that shipped with your MBP in 2010, it may be failing. If it keeps needing repairs, that is probably a sign that it is approaching the end of its useful life.
Have you run Disk Utility's Repair tool on the external drive as well?
I mentioned the hub because some people have reported here that attaching their USB 3 drives through a USB 2 hub solved some disconnection problems. A good-quality powered USB 2 hub won't cost much.
My most recent brush with random disconnections involved a nice new OWC drive enclosure. I used the cable that came with the drive, but the drive kept disconnecting. Using a different cable solved the problem. You wouldn't expect that what appeared to be a high quality cable would be a problem straight out of the box, but it was.

Is it possible to have both Snow Leopard and Lion at same time on one machine without creating a mess?

I currently use Snow Leopard because I like the way it preserves the operation of OS10 PPC programs. I have both an expensive CAD program and Adobe Photoshop CS3 which are PPC programs.
Can you launch your machine with Lion when you want to use that, and launch with Snow Leopard when you want that. Its too bad Lion does not support PPC OS10.

Absollutely. This is a very common practice whenever a new OS or OS update comes out. By far the best way to do what you want is to install Lion onto an external firewire 800 disk, then boot off it when you want to use Lion and boot off your iMac's internal disk when you want to use Snow Leopard. USB 2 will work, but firewire 800 will be faster.
The second best option is to partition your iMac's boot drive, then use one partition for Snow Leopard and the other for Lion, but be sure to back up your boot drive to an external disk drive before you partition it.
You can switch operating systems during a restart by holding down the option key.

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Is it possible to go back in time with Time Machine and reinstall Snow Leopard. Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

Snow Leopard and new HD

Similar Messages

Maybe you are looking for