Snow Leopard failed to install after upgrade to Crucial 128GB SSD

Hi I just installed a new Crucial 128GB SSD to my MacBook 2010. Did the necessary to formt the hard disk Mac OS journal. However i am unable to install Snow Leopard from the installation disc.The message says "Install Failed, Mac OS X could not be installed on your computer. The installer could not copy the necessary support files". I have tried restarting and reinstalling but it always stop during installation at about "33 mins" left. Anybody can help?
Thanks.

Hey, i had the same problem and i tried allmost everything: but the problem was not the ssd, not the ram, not on changing the date, not on installing only part of the programs (X11, or the Fonts, etc.), to install first 10.5 and then 10.6...
in my case the problem was the driver. I just buy a new samsung external driver and I install with no problems the complete snow leopard.
After allmost 3 weeks with the problem I can say that I'm very happy.
Hope it helps,

Similar Messages

Snow Leopard fails to install - Tech Support and Genius Bar can't fix it

I am having an exceedingly difficult time installing Snow Leopard. I have tried everything I can think of and tech support AND the Genius Bar have failed me so far.
The Details:
Every time I install SL it starts off well but sometime between 18 minutes remaining and 6 minutes remaining it fails. I get an error message that says there was an error that prevented installation. Looking in the installer log gives me a little more information. It usually has 15 or so errors, the last of which is always a very long line saying some package failed to install/unpack/be copied. The odd thing is that the file name is different every time.
So far I have tried:
Repairing the disk and installing
Installing from a different install DVD
Installing from external hard drive at the Genius Bar
Installing using RAM borrowed from the Genius Bar
Wiping the HD completely. I erased all my partitions and tried to install on a completely blank hard drive with a single HFS+ partition
I can only think of a few things that can cause the install to fail: DVD, optical drive, RAM, files on HDD, and HDD hardware. I think I've eliminated all those possibilities except HDD hardware. Changing that on a MacBook isn't trivial and I don't have one handy. Also I would think a HDD problem, or any hardware problem, would cause all sorts of errors and with the exception of this the machine has no serious problems and apps crash only occasionally. I've had no system crashes for as long as I can remember.
I have a Time Machine back up and have successfully restored my old Leopard System onto the MacBook (twice now) so at least I have the option to just give up on SL if I want to. As an aside, restoring from TM went well but not perfectly. Next time I install an OS I will be making a disk image backup. Does anyone else have any ideas? If you solve this problem I'll be eternally grateful and very impressed.
Thanks in advance
Jay

I'm sorry. I should have answered when you asked about RAM the first time. I have 2GB. I have tried installing with that, and I tried installing with RAM at the Genius Bar. I don't know how much the guy used at the Genius Bar.
Last night I restored from time machine so I currently have Leopard installed on the machine. After the restoration my email archive is little strange, I had to re-authorize iTunes and various other annoyances pop up but it runs without any problems.

MacBook Pro Unibody Leopard Failed to Install after reformat drive.

Hello All,
Here is my dilemma. I had a triple boot laptop and everything was fine. I updated Fedora 10 to 11 and after I could not boot my computer. I have everything backed up. I decided to reinstall everything from scratch. I deleted all the partitions. Put the DVD and proceed to install a fresh 10.5.5, everything goes well. Formatted the drive using the GUID partition, HFS+ journaled, the install goes well but when it finishes it fails. The message on the screen says, " The Installer could not make the computer start up from the volume "Mac HD". You may need to select your disk using the Startup Disk Utility. I have reformatted this drive several times, even ran zeros on it onvernite and so far nothing. For some reason I can't install Leopard back on this drive. Any help...???.
Thanks,
Manuel

Unibody MBPs were originally released with a special build of 10.5.5 and then later with a build of 10.5.6. You should use only the original OS X Installer Discs that came with the computer.
Given your previous setup I suggest you start as follows:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APT (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options or Security button, check the button for Zero Data (one pass) and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
It's not entirely clear from your post that you've done all of the above procedure.

Snow Leopard slow to sleep after upgrade install

I installed the new 10.6 on two iMacs, one that had Tiger and one Leopard. the Tiger upgrade takes the normal time - about 2 seconds -when putting it to sleep, but the Leopard upgrade takes 30 seconds.
what happened? Or Why? How to fix?

I have the same problem with an MBA that takes 30s to go to sleep. I tried the terminal session you suggested and got the following back as the only entry with 30000 in it:
* Domain: applicationresponse.timedout
- Message: Kernel cupsd com.apple.powermanagement.applicationresponse.timedout 30000 ms
- Time: 17/05/2011 15:16:54 GMT+01:00
- Signature: cupsd
- UUID: 348D380F-4A44-4B7F-A113-3BDA08B5843E
- Result: Noop
- Response time (ms): 30000
Trouble is I am not sure how to interpret this into a next action.

Drivers for XP won´t install after upgrading to Snow Leopard

Hi guys, I have a MacPro with Snow Leopard and I installed XP 64 bit under bootcamp, but when i put in the Mac os SL disk to install drivers in nothing happen. Usually with the older imac that was possible but not now. Any idea?
Thanks a lot?

Hi mayaman,
Apple supports Vista 64bit on the following Macs:
MacBook Pro (13-inch, Mid 2009)
MacBook Pro (15-inch, Early 2008) and later
MacBook Pro (17-inch, Early 2008) and later
Mac Pro (Early 2008) and later
http://support.apple.com/kb/HT1846
And drivers for Vista 64bit are on the OSX DVD (Leopard and Snow Leopard).
Regards
Stefan

Clean install of Snow Leopard fails

Dear all,
As the title says my current issue is that I'm unable to perform a new installation of Snow Leopard after performing a single-pass secure erase of the Mac partition of my hard drive. However, some background to the problem is probably useful.
My troubles begin after attempting to transfer files from an USB stick to my Macbook pro. Drag/drop or copy/paste in finder resulted in nothing happening. I ejected the USB drive (which flashed to let me know the drive itself thought it had been ejected) however the USB stick did not disappear from Finder. Further attempts to eject the stick using finder did nothing. Attempting to reset Finder produced the well known "The application Finder.app can't be opened. -10810" error (see http://discussions.apple.com/thread.jspa?threadID=2135129&tstart=45). After reading through that thread and trying some of the suggestions I eventualy had to resort to a hard reset of my macbook. After restarting the macbook ran very slowly for a couple of minutes before producing the same Finder error as before (though no external drives/devices were involved this time).
After coming up against the same problem again and again I decided to verify and repair the drive using the OS X installation cd that came with my macbook pro. The hard disk itself seemed ok (S.M.A.R.T: verified), which I expected as I have Windows 7 running under bootcamp on a separate partition. (As a quick aside, Windows 7 was and still is running fine, and in fact I could successfully access and open all the files on my Mac partition from within windows. This allowed me to grad up-to-date copies of all my important files before taking more drastic action.) Verifying the mac partition resulted in a message saying the disk needed repairing. Attempting to repair the disk initially resulted in errors saying a clean install was required, though the repair succeeded on my 4th attempt. This repair failed to fix the problem and I was still getting the very slow running leading quickly to the same Finder error.
Eventually i decided my only option was to perform an erase and install of Snow Leopard. Initially I simply erased the partition using Disk Utility after booting from the install disk (default option) and then attempted to install Snow Leopard. The install failed repeatedly, alternating between 'An error has occured in the installation process' and 'Unable to install supprting files' error messages. I also tried repairing the disk after erasing and then installing with the same errors. I then performed a single-pass secure erase on the Mac partition (again from Disk Utility via the startup disk), verified the drive (finding an unassigned node error), successfully repaired the drive (twice, just to make sure) and attempted another installation, which again failed with the 'An error has occured in the installation process' error.
So I currently have a formatted Mac partition which refuses to accept a new Snow Leopard install and a fully working copy of Windows 7 running under bootcamp on a separate partition of the same disk. Is there anything else I can try other than reformating the entire hard drive and losing my bootcamp installation?

try this idea: Do a leopard install to an external disk then do a Disk Utility "restore" function to that clean partition. So you restore from the external to the internal partition. Should leave Bootcamp untouched.

Have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?

have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?

Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)

Hello, I have a 2009 iMac, and my harddrive has failed several times now, and now I need to re-install snow leopard but my install DVD is damaged and I have bought a new snow leopard disc. However my iMac will not read the disc at all ?

Hello, I have a 2009 iMac, and my harddrive has failed several times now.
I tired to reinstall snow leopard with the install DVD that came with my iMac. However the disc is damaged so I bought a new Snow Leopard but my iMac wont read the new disc, it just stays in the apple logo screen, I have tired safe boot, holding down the "C" key on startup and tried using disc utility but getting nowhere.
Please help. Thanks.

Might be related, if your hard drive is a 1TB drive,it could be a Seagate drive.
The drives are known to fail and your iMac maybe covered for free replacement under the Apple's Seagate hard drive replacement program until April 12 of this year.
I Believe the 2009 models are covered under this replacement warranty.
You can find out if you are eligible here.
http://www.apple.com/support/imac-harddrive/
Good Luck!

If I upgrade from Mac OS v 10.5.8 to 10.6 Snow leopard will my installed applications such as timemachine and MS Offfice for Mac 2008 still work?

If I upgrade from Mac OS v 10.5.8 to 10.6 Snow leopard will my installed applications such as MS Office for Mac 2008 still work? Will time machine files created under OS 10.5 still be accessible?

Yes

I have an older mac, i purchased Snow Leopard so that i could upgrade to Yosemite but now it says Snow Leopard is too out of date to update to Yosemite!

So i have an older Macbook that ran Leopard and i was told via Apple that in order to upgrade fully to Yosemite i would first have to purchase Snow Leopard, then i'd be able to update to Yosemite for free. I got the Snow Leopard disc (it was scratched which REALLY ****** me off, since i paid $20, but it seemed to work installing the new OS so whatever), and it's now at version 10.6.3 - i tried to run software updates and it says it's successful, but that i need to restart my computer. Every time i try, the screen just freezes with the desktop image and never restarts. And now i can't update to Yosemite because i need to have 10.6.8! I am very frustrated and not sure where to go from here. Can anyone help?

Don't panic. You can download and install Mac OS X 10.6.8 Update Combo v1.1. Then you can access the App Store in order to download Yosemite.
Meanwhile you need to reinstall Snow Leopard properly:
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
I want to install the latest OS, but I already know that I will lose a lot of my software unless I can partition the hard drive and have two "bootable" drives.
How do I retain everything I have, partition the drive, then reloa the software I own according to which OS it will work under?

msmedia wrote:
I do not currently own OS X ML.
I am currently running OS X (10.6.8 Snow Leopard) on my MacBook Pro. It has a 2.8GHz Intel Core 2 Duo Processor. I want to upgrade to Mountain Lion, but many of my software titles will not operate with ML and I cannot afford to replace some of them (Adobe Creative Suite, for e.g.)
After I back-up my HD and then partition the HD, how do I use the back-up to reinstall what I want to the SL partition, and then place the rest on the ML partition.
I have not done what you want to do, so can only offer some general thoughts in support. Take value from the following where you can. No guarantees.
If it was me, I would use a disk clone utility (e.g. Carbon Copy Cloner) to image the existing Snow Leopard disk to an external drive. Then verify that the external drive would boot and run Snow Leopard normally.
I would then purchase and download the Mountain Lion upgrade installer, but not run it. Use Lion Diskmaker to make a bootable USB stick, and perform a clean install of Mountain Lion, replacing the Snow Leopard on your MBP. This way, you make absolutely certain that no third-party drivers or other SL cruft remains to make Mountain Lion unstable. Update to latest ML point release. Fix permissions. Let TimeMachine make a full backup of your ML installation to a different external drive. Then turn of Time Machine.
In Disk Utility, use the + sign at the bottom of the ML partition to add another GUID, HFS+ Journaled partition for Snow Leopard. Resize to taste. Name it differently from your ML partition. Exhale.
Now ideally, you would like to reverse the external clone and put it back into the new SL partition. Then fix permissions. And demonstrate that you can boot into individually stable OS X installations. This would save you alot of work. Resist copying your home directory into ML just yet.
If you cannot successfully achieve the preceding paragraph, you will be faced with a full SL and application reinstall.
The ~/Library contents for SL and ML are sufficiently different that you do not want to mix them. You may want to salvage Safari bookmarks.plist. And, ML created folders in the home directory may have different permissions or ACL settings than in SL. So, my rule of thumb would be to copy folders that you created in SL, and only the contents of matching named OS created folders such as Music, Pictures, Downloads, etc.
For each operating system, you probably want the Time Machine settings to exclude the opposite OS X partition. If you use the same host name in Sharing prefs, then you will mix SL and ML backups on the same Time Machine back up drive. If you use different host names, they will be distinct folders in the Time Machine backups.backupdb and allow discrete restores per host. You may also want to gag Spotlight from indexing the opposite OS X partition.

Someone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
Thank you for your answer
Majo

I have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update?

i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.

If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

Wiped my entire macbook drive and now snow leopard won't install over snow leopard server, HELP!

I ordered, what I thought, was Snow Leopard a while ago because I was running Leopard and I wanted to get the app store so I could move onto Lion and then Mountain Lion. I ordered the disc over the phone and the woman sent me the Snow Leopard Server instead of just Snow Leopard, I didn't think much about it so I clean installed it and ran it on my unibody macbook for a while. I didn't see much use for the disc anymore seeing that everything was downloadable at this point, so I sold the disc on Ebay and carried on. The server edition started to slow my computer down due to all of its excess applications and what not, and I read online that Lion and Mountain Lion are also very slow on the old unibody Macbooks so I ordered a regular Snow Leopard disc, now available online, and tried to install it. My computer said Snow Leopard cannot be installed over Snow Leopard server so I went to disc utitlity and wiped my entire drive while the OS X Snow Leopard disc was running and trying to install. I went back to the install window and it still said OS X Snow leopard cannot be installed over Snow Leopard Server so I shut down my computer and tried to turn it back on and I all I got was a blinking folder with a question mark in it, what do I do????????
P.S. All of my content is backed up on an external harddrive so I am all good with that.

Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting has finished quit DU and return to the installer. Complete the Snow Leopard installation.

HT1338 Where can I buy Snow Leopard so that I may upgrade to Lion?

Where can I buy Snow Leopard so that I may upgrade to Lion?

If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
Third-party sources for Snow Leopard are:
Snow Leopard from Amazon.com
Snow Leopard from eBay
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax. It's a download.

Snow Leopard failed to install after upgrade to Crucial 128GB SSD

Similar Messages

Maybe you are looking for