Snow Leopard install doesn't recognize system disk
I'm trying to upgrade a MacPro1,1 running Leopard 10.5.8 to Snow Leopard. The system has 3 hard drives, two striped RAID sets, each made with two physical drives and an external hard drive enclosure used for Time Machine.
When I run the SL installer, I agree to the license and get to the screen where I pick the hard drive to upgrade. Neither of the RAID sets is displayed, only the Time Machine disk.
Already tried repairing disk permissions with Disk Utility with no luck. Leopard boots and runs fine on this machine. What's going on?
I just re-ran the installer to look for the 'Show All Disk....' button. There is no such button in my installer.
The only actions available are to click on the displayed, Time Machine disk, which shows a message that the disk can't be used "because it doesn't use the GUID Partition Table scheme." If I have no disks selected, the "Customize..." button is active which brings up a dialog with no contents except for the text "0 bytes required for installation", a "Restore Defaults" button in the lower left and an "OK" button in the lower right. "Restore Defaults" does nothing and "OK" dismisses this dialog. Finally, I can click "Go Back" which just takes me to the initial screen.
Similar Messages
-
After update to Lion and going back to snow leopard, iWeb doesn't recognize my website
I upgraded to Lion thinking my files were backed up on MobileMe as set up. After finding out most of my favorite programs had no upgrade to Lion, I had to erase my hard disk and re-install Snow Leopard. Some of my programs don't work now and iWeb won't recognize my personal website, so I can't update it. What and how do I correct this issue? I also can't get my printers working in spite of numerous re-installs of their software and internet updates. HELP!
The critifcal file to have for iWeb to work on your websites is named Domain.sites2 and is located in your Users/Home/Library/Application Support/iWeb folder.
If you don't have a backup copy of that file you will have to rebuild your sites from scratch. Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the creation of the new site.
OT -
How do I erase my hard drive? My initial operating system was Snow Leopard but I have upgraded to Mavericks OS. My Snow Leopard install disk ejects when I try and use it.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data. -
I am trying to upgrade from Tiger to Snow Leopard. When I insert the disk and install starts, it states "This disk is used for Time Machine backups" and Mac OSX can't be installed. Does anyone know how to correct this (since Tiger doesn't have Time Machine)?
http://support.apple.com/kb/TS2986
-
Attempting Disk repair with Snow Leopard install DVD. Prompted to restart several times
Hi,
I'm trying to do a disk repair with my MBP (2010, OS X snow leopard). I tried to enter Disk Utility with my Snow Leopard install DVD by pressing down "c" during startup but it gives me a grey screen in several languages prompting me to restart again. Restarted and I get the same screen. Can anyone help me?You are getting a (kernel) panic crash booting from the installer dvd? Hmmm. That's doesn't sound good. Try resetting smc and pram.
If that doesn't fix it try to boot the Apple Hardware Test and check your machine -- assuming that will boot?
Also look inside if you get that panic crash and see if there are any diagnostic leds lit.
If this continues you might try disconnecting all unnecessary peripherals (usb, fw, extra drives). -
TM backup disk cannot be found after Snow Leopard install
Message from elsewhere re-posted here after helpful advice from Apple Discussions Team.
Just installed Snow Leopard (with TM switched off though not unplugged) and got all the software updates available. I re-installed the TM installation disk. Everything went ok until I wanted to restore from my Time Capsule. I switched the big switch on. TM is continuing to make backups but when I want to locate folders to restore TM won't go back further than the day I installed Snow Leopard. Having selected the TM disk and entered the password the dialogue tells me that the TM backup disk cannot be found and offers me the select disk dialogue again. I have gone through the unplug/plug routine.
Through Migration Assistant I tried the contents of my Pictures folder (including all my iPhoto libraries) but it just supplied an empty folder. Since I didn't migrate at the time of the Snow install I wonder whether it was migrating the earliest backup it had made after the Snow install. This would make sense if "the Time Machine backup disk cannot be found", as the dialogue keeps telling me.
Anyone any ideas?I'm not sure just what you did.
Did you reinstall Snow Leopard? Did you do a full restore?
First, just re-select your Time Capsule in TM Preferences.
If that doesn't help, try a "Full Reset" of TM per #A4 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
If that doesn't help, see #E2 there.
If still no help, use the Finder to see if you have two sparse bundles on your Time Capsule. If so, try mounting one manually by double-clicking it, then using the Browse option per #E2. -
Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!
Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 2GB at least)
* 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214 -
How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
HELP PLEASE!!Is the new HHD in the MBP?
Is the new HDD formatted Mac OS Extended (Journaled)?
Where is the old HDD? In an enclosure? What is on the old HDD, your user data? Is the Snow Leopard System on it?
Do you have a separate Time Machine Disk with your user data?
Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
Ciao. -
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
Neither software upgrade or Snow Leopard install disk will upgrade
Neither software upgrade or Snow Leopard install disk will upgrade
I run 10.5.5 and have tried to update my OSX using software upgrade and when I click install it greys out then a few seconds later it turns blue again and nothing happens.
So I purchased Snow Leopard hoping that would fix the problem. Well I insert the DVD and click install Snow Leopard, same thing, I click the blue install button, turns grey then a few seconds later turns blue again and nothing happens so I CANNOT UPGRADE!!
Anyone have some advice where to start?Hi eastwooddesign;
Upgrading to fix problems usually doesn't succeed and generally make them worst.
Exactly what Snow Leopard disk do you have?
Did you boot from that DVD?
Allan -
my mom threw away my box with my install discs my retail snow leopard disc doesn't support mac mini 2010 ethernet. can apple help me ? less than 1 month old.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
-
My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!
If Disk Utility cannot see your drive it doesn't look good.
You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
additonal notes;
Gray screen appears during startup -
I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp -
Snow Leopard Installer does not recognize Hard drive in disk utility.
I first at the suggestion of apple technicians because of other problems erased and partitioned hard drive. Now when I go to reinstall Snow Leopard it does not recognize the Macintosh Hard Drive, not even in disk utility. Any help will be greatly appreciate.
To make sure we understand everything correctly, you are saying that when you start up from the Snow Leopard DVD & run its copy of Disk Utility from the Utilities menu, it shows only the DVD installer disc itself in the list on the left of Disk Utility's window? There is nothing else there?
Also, what are you booted from when you try to make an image of the installer DVD, the DVD itself or something else? Are you using Disk Utility or something else to make the image?
This seems very weird for sure. If you were running from some hard disk copy of the OS, I would suspect that its copy of Disk Utility or some OS support file was corrupted, but if you are doing this from the DVD that is extremely unlikely unless the DVD itself is physically damaged.
Apart from that, pretty much the only thing left is a damaged hard drive or other hardware failure in your Mac. -
iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?It is possible. I'll let you read some articles that cover the setup:
Starting from an external USB storage device (Intel-based Macs) - Apple Support
or
http://osxdaily.com/2013/06/22/boot-mac-external-drive/
Maybe you are looking for
-
Printing problem with hp laserjet 1536dnf MFP
Printer HP1536dnf Operating system Windows 7 (32 bit) Printer has been set up and installed correctly. Problem is when printing the lcd is showing "printing document" but nothing happens for a while and I get a PCL XL Error Subsystem: TEXT Err
-
I have customized my Firefox toolbar several times. After closing the browser and then reopening it, the toolbar has returned to the way it was before I customized it each time. How do I get my customization of the toolbar to become permanent? It has
-
Hi, I have 2 withholding taxes for a vendor but I only want one of them to be picked up for related transaction. But I encounter is, the system calculate withholding tax for both taxes. Please advice how can I choose one of them for a transaction. Th
-
Calling a function inside a symbol?
Hi there, I'm one of those flash-devs that are trying to get Edge Animate to do what I usually do in Flash, so I might be doing this the wrong way, but I've got a symbol with a function "inside" on my stage, and I wanna call that function from the st
-
JTable cell editor not working
Hello there, I am new to Java programming, I am trying to create a check box in a table cell which the user should able manipulate when the JTable is showing, the renderer is working fine but the editor is not , the overriden method getTableCellEdito