Snow Leopard Install Issue - HELP

Hope someone can help ..... I just installed Snow Leopard 10.6.3 from a brand new install disk.
Everything went fine UNTIL I did Apple Software Updates.
Once those were complete, I get this screen at Startup.
If I power off and back on the same screen comes back.
I thought about trying to reinstall, but if I put the disk in will it bypass this screen or what?
Any hekp would be greatly appreciated.
Fred

Freddy Gingell wrote:
I can't get the image to upload into the discussion...
Take a screenshot or picture of the screen, make sure it is in png (default for a screenshot) or jpeg format. Make sure it is available in a handy place, like on the desktop. Then click the camera icon in the reply message entry window -
and follow the prompts.

Similar Messages

Mac Snow Leopard install issues w/ CS?

I'm upgrading my Mac OS to Snow Leopard (10.6.3), and prior to doing so, I decided to go online and search to see if there were any issues or recos I could fine re: the upgrade. I'm glad I did. I seems there are a few problems with Adobe CS softwares – saving files and software crashes with Snow L.
I am running all CS4 versions, with the exception of InDesign (CS6). Did Mac/Adobe resolve the issues with the 10.6.3 version?

CS4 should work fine without any issue on Snow Leopard , there could be problem that could be system or application specific which we can try and help you with.

Mac Mini 2010 Server Snow Leopard Install Issues

I'm trying to install, well reinstall, OS X server on my 2010 Mac Mini Server. Everything is completely stock and I'm reinstallling via a Mac Book Air Superdrive and the OS X disc that came with my Mac mini. I'm installing it on the main disk partitioned to 100gb. Everytime I go to install it goes to restart and then I have no video. When I power down manually after this it only shows the CDROM as the boot disk but the drive shows ~7gb used when I get into disc tools. I've done this about 3 times now and I'm just about ready to return it. I'm using a Sony Bravia HDTV as the monitor via HDMI port for display. I don't have any other displays or macs to use either.

Jnko, I've reinstalled the OSx server on my 2nd HD using the MBair Superdrive and all went well. After installation there is only 7G used so that is proper.
If you're losing the video, try unplugging the HDMI cable and replugging at the point of failure. This usually resets the video.
Hope this helps.

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
initialy All I was trying to do was downgrade 10.7 to 10.6 .

You have to consider the possibility the hard drive may be dying. If your data isn't backed up, try one of the tools below:
https://discussions.apple.com/docs/DOC-1689
Once you are sure your data is backed up, we can examine other possibilities. In the meantime call AppleCare for your original installation DVDs. You may need them.

Windows 7 does not read drivers on my OS Snow Leopard Install dvd

When I start the DVD and the setup.exe I get 2 options - Remote Install Mac OS X and DVD or CD Sharing, no drivers are being downloaded or appear to be on the DVD.
Any ideas, please help.

Ok, after 3 sleepness nights I have found a solution and finally have a working Windows 7 Ultimate. I hope this will be helpful for everyone having similar issues and not have to go through the same nightmare.
Right away after logging in Windows for the first time insert the original Snow Leopard Install DVD and if Windows does not read it or install any drivers after clicking on setup.exe do the following:
Right-click on Start » Programs » Accessories » Command Prompt
Select Run as Administrator
Type cd /d D:, then press Enter
Type cd Boot Camp\Drivers\Apple, then press Enter
Type BootCamp64.msi, then press Enter
If you do not how to right click before installing the drivers the following:
Click on Start
Enter cmd in the search box
Instead of hitting the Enter key use Ctrl + Shift + Enter and will open a dialog box
Click Yes at the prompt and you will be running as an administrator.
If you do not have the original install DVD go the this link and follow the instructions(including the ones from the last comment):
http://blog.timvalenta.com/2011/11/19/boot-camp-driver-downloads/

Just had Snow Leopard installed. Iphoto won't open. I'm supposed to photograph 300 people on Friday.

I have no idea why Iphoto won't work. The icon bounces once, and then does nothing although I see the details at the top of the screen.
I've used it extensively since I had Snow Leopard installed last week. Did not upgrade to iphoto11 after much negative feedback from my photographer pals.
I did notice that when I opened a couple of photographs to edit them that once in a while a green or red background appeared, but it was random and only happened on a couple of photos.
I have tried Shutting Down the computer, force quit iphoto a few times........Nothing.
I am 3 hours away from an Apple store and have the largest assignment of my year in less than 48 hours.
Can anyone help me out? Many thanks.

Thanks for sharing so much of your life story, though I'm not sure what relevance it has to your issue, which, I believe is that you can't open iPhoto.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

IPhone 3GS doesn't sync after snow leopard install

Since installing snow leopard, iTunes does not sync with my iPhone when I connect it to the computer. iPhoto automatically opens to sync, but iTunes is dormant, and does not list my phone under the devices menu.....help!!

This same thing happened to me today. Snow leopard install and now itunes cannot find any of our iphones. It might be nice IF APPLE ADDRESSED THIS ISSUE HERE ON THE THREAD. We also have a brand new iphone and can't even get it synced, which really really *****.
It bothers me that apple is not responding immediately to this issue.

Attempting Disk repair with Snow Leopard install DVD. Prompted to restart several times

Hi,
I'm trying to do a disk repair with my MBP (2010, OS X snow leopard). I tried to enter Disk Utility with my Snow Leopard install DVD by pressing down "c" during startup but it gives me a grey screen in several languages prompting me to restart again. Restarted and I get the same screen. Can anyone help me?

You are getting a (kernel) panic crash booting from the installer dvd? Hmmm. That's doesn't sound good. Try resetting smc and pram.
If that doesn't fix it try to boot the Apple Hardware Test and check your machine -- assuming that will boot?
Also look inside if you get that panic crash and see if there are any diagnostic leds lit.
If this continues you might try disconnecting all unnecessary peripherals (usb, fw, extra drives).

How do I reinstall my operating system after hard drive upgrade on MacBook pro? I have Snow Leopard install disc

How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
HELP PLEASE!!

Is the new HHD in the MBP?
Is the new HDD formatted Mac OS Extended (Journaled)?
Where is the old HDD? In an enclosure? What is on the old HDD, your user data? Is the Snow Leopard System on it?
Do you have a separate Time Machine Disk with your user data?
Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
Ciao.

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

I have snow leopard installed as an OS. When trying to reboot a MacBook Pro I am getting stuck on grey screen with apple logo and rotating symbol. What can I do?

Maybe this might help.
http://support.apple.com/kb/TS2570

Can't get some websites to work after snow leopard install, java maybe?

I'm a day trader. I use TD Ameritrade every day to work on. I believe the real time streamer and level 2 quotes are all java based.
This past weekend I did the Snow Leopard install on my computer. Until this morning it seemed like all was well.
I go to ameritrade and try to log in and it keeps saying it doesn't recognize my log in. I called them and they are able to log into my account so its my computer. I went to the java preferences and there use to be a lot of java types there now there are just 2, could that some how be it?
Any suggestions?
Susan

Safari is a 64 bit application, is it worth starting the app in 32 bit mode and testing if it is any better.
use finder and highlight Safari in the applications directory, do a get Info (cmd i) and tick the 32 bit mode box and restart Safari.
If it does not help remember to revert back to 64 bit mode.

MAC OS X Snow Leopard install disk won't install "with this version"

I am trying to get ready for the Snow Leopard install disk to migrate from Mobile Me to ICloud. However, the disk install I received to start the process won't allow me to install saying I have the incorrect version to do so. I am up to date in all my software installs. What am I doing wrong?
Thanks!

If you have an iMac running 10.7.4 as it says in your profile, why are you installing Snow Leopard? If this is a different computer then it would really, really help to know something about it.

Will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?

will Mac OS X Snow Leopard INSTALL on a IMAc g3 slot lOADER?
Message was edited by: Youngzink13

That's what we needed.
Officially your iMac--known as a "tray-loader" for its optical drive type--can go to Panther (10.3.X). Panther is quite better than Jaguar (10.2.8) that you now have. You probably need more RAM than 160MB for even Jaguar. I feel that 384MB is about min for that OS.
The big problem is that the early iMacs came with painfully small hard drives --4 to 6 G--and OSX need a lot of free space on the disk for efficient performance. It's hard to keep a Jaguar system under 2G with a few useful apps installed.
Bottom line: you'll spent money for a hard-to-find retail OS install disk, more RAM, and a bigger hard drive, and you'll still have a slow computer that will always struggle with modern web pages. If you want to upgrade and experiment as a hobby or learnign experience and you can afford the parts and time, by all means--go for it. However, if cost is an issue, throwing money at this unit is not cost-effective in terms of how much more yo ucan get from it.

When will we get a fix for the Snow Leopard Compatibility issue??

When will we get a fix for the Snow Leopard Compatibility issue?
I am growing impatient not being able to use cross dissolve or titles.
Its going to be a pain having to back out to OS 10.5. This is beginning to be like Windows Vista.

You don't say what "..Snow Leopard Compatibility issue.." you're having.
My titles and Dissolves - and everything else - work perfectly with iMovie HD 6 and with iMovie '09 in Snow Leopard.
Perhaps you need to revert to QuickTime 7 ..just in case you over-wrote QT 7 with Snow Leopard's own QuickTime X when you upgraded to SL.
QT7 and QT X both sit happily alongside each other in Snow Leopard ..you might want to give that a try.
But I have no problem with any aspect of iMHD6 nor iM09 (..and no trouble with "stills"..) using Snow Leopard on a "late '08" MacBook Pro.
I haven't yet installed SL (Family Pack) on my Mac Mini ..I'll let SL throw away my QT7 on that, and will see if that causes any problems with iMovie. If it does, I'll then download and re-install QT7 and see if that fixes any problems. But don't hold your breath ..I may report back tomorrow, but today I'm pretty busy! I'll do my best, though..

Clean Snow Leopard Install yields the Welcome Video to loop continuously

Has anyone seen this before?
Mac Mini (MA468LL/A) with a clean Snow Leopard Install. After I kicked off the install, I returned an hour later to find the Welcome Video looping continuously. There is a brief moment at the beginning (or end of the video) when I can move the mouse on the screen with a grey background.
Now, no keyboard combo's work at bootup. I can't boot to the DVD again, I can't clear the NVRAM, etc. I can eject the DVD, but only when the unit is looping the video.
Any help would be appreciated, Please!
PS - The only thing different from a typical install was this - I deleted the previous Leopard partition using the the Disk Utilities.
Message was edited by: GordonInCleveland

Welcome to Apple Discussions.
After ejecting the DVD and shutting down your Mac, can you restart normally? If so, then you could wipe the partition again and re-install.
Also, have you tried starting in single user mode. At the prompt type fsck -fyremember to leave a blank space before the "-fy".
This will run a file system check, like Repair Disk and repair any problems if it can. If you run into errors run fsck multiple times until it reports OK.
Then, type rebootreboot to restart to OS X.
-mj

Snow Leopard Install Issue - HELP

Similar Messages

Maybe you are looking for