Snow Leopard installation doesn't back up using TC Disk

Hi,
Has anyone else on here had problems with Snow Leopard not working with an Apple Time Capsule? OS X 10.5.8 allows for Time Machine backups to be successfully created however this no longer works on my MacBook. The TC Disk is recognised however all attempts to make backups fail.
Not having a lot of luck with my Apple 1Tb Time Capsule. Doesn't allow for USB External Hard Disk Drives nor USB Sticks to be attached furthermore on the subject of Snow Leopard it's bricked my Macintel Mac Mini.
Hope Apple can address these issues.
Any suggestions would be appreciated.
Thank you.
Best Regards.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

Similar Messages

Snow Leopard Installer doesn't detect my hard drive?! help!

After my earlier post, where my replacement 320gig hard drive is incorrectly (not GUID) partitioned, I backed everything up, made a time machine copy just to be safe, and set about formatting the entire drive, doing a fresh install, and then updating via one of my back ups etc.
However, when I tried restarting from the CDRom, it just hung on the Apple grey splash screen for about 10 minutes with nothing happening, I restarted and held one 'ALT' the two options were my hard drive and the Snow Leopard install disk - I selected the install disk and after short while I was presented with the installer.
The installer displayed no hard drive, nor did the disk utility within' the installer, I can't think what the problem could be, as, as soon as I ejected the installer cd, I booted straight back into my normal system (which I am writing this on now).
I really am stumped as what to do next, comments, suggestions and observations welcome :-D
Andy (D-F3ens)

I tried that and the both disk's pass the verification, the problem is the installer detecting my hard drive.
When i'm running 10.5 and try to install from the SL Disk it picks up the hard drive (but says it cannot install to this volume, use disk utility etc) - its when I restart and enter the installer via the splash menu, it fails to pick up my hard drive.
I cant see any other way of partitioning my drive to the required GUID, even when I made a seperate 20gig partition, it remains as Mac OSX Journaled on the same drive thats partition scheme is 'Apple Partition Map'.
Bootcamp will not help me either, I thought of creating a seperate partition and installing it to that, then reformatting the rest of the drive from within' SL, but Bootcamp says that it cannot modify the 'startup disk' and says it requires reformatting.
I really am stumped as to what to do next, I can't understand why the installer picks up the hard drive whilst its running, but when its in the installer it doesn't
Help!!!!

Snow Leopard Installer does not recognize Hard drive in disk utility.

I first at the suggestion of apple technicians because of other problems erased and partitioned hard drive. Now when I go to reinstall Snow Leopard it does not recognize the Macintosh Hard Drive, not even in disk utility. Any help will be greatly appreciate.

To make sure we understand everything correctly, you are saying that when you start up from the Snow Leopard DVD & run its copy of Disk Utility from the Utilities menu, it shows only the DVD installer disc itself in the list on the left of Disk Utility's window? There is nothing else there?
Also, what are you booted from when you try to make an image of the installer DVD, the DVD itself or something else? Are you using Disk Utility or something else to make the image?
This seems very weird for sure. If you were running from some hard disk copy of the OS, I would suspect that its copy of Disk Utility or some OS support file was corrupted, but if you are doing this from the DVD that is extremely unlikely unless the DVD itself is physically damaged.
Apart from that, pretty much the only thing left is a damaged hard drive or other hardware failure in your Mac.

I had to restore my 2006 MacBook Pro back to factory settings (Tiger 10.4). Can I use my Time Machine back up from Snow Leopard to put it back the way it was?

I cannot locate my Snow Leopard disks but I was able to use the Tiger disk that came with the computer to restore it. However, it completely erased it and set it back to Tiger. Can I use my Time Machine to put Snow Leopard and my data back on the computer?

You can't restore a Time Machine backup made with Snow Leopard onto a system with Tiger. You can, but you will damage Mac OS X.
In order to restore your Time Machine backup, you should have your Snow Leopard disc. Then, insert it and hold the C key while your MacBook Pro is starting. Finally, choose your language, go to Utilities menu (on the menu bar), choose the option to restore the backup and follow its steps, so you will recover Mac OS X Snow Leopard

Can you tell me why iPad 2 is not cannot to laptop with snow Leopard it doesn't cannot it

Can you tell me why iPad 2 is not cannot to laptop with snow Leopard it doesn't cannot it

You question is garbled. Are you saying your iPad cannot connect to a laptop with Snow Leopard? Restart your computer. Start iTunes and check for updates. If there are any updates to itunes download and install it. Then restart your computer and start iTunes.
Then reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart.
Finally connect your iPad to your computer. Use a USB on your computer that is not on the keyboard or connected to a hub.
If you do these things and it still doesn't show up in iTunes on your computer report back here and explain clearly just what happened.

De-authorize Snow Leopard installation

I'm selling my old MacBook Pro, and I have a licensed copy of Snow Leopard on it. I'd like to de-authorize it prior to selling. My Snow Leopard installation CD is a 5-copy (family) version. How do I gain the authorization back? Thanks in advance.
Frank

There is no "authorization", per se. Since you have a family pack and hence can't provide a copy of SL to the new owner with the MacBook, you'll want to use the system installation disks that came with the MBP to erase the drive (highly recommended anyway, and I'd suggest going to the Security Options in Disk Utility and choosing the "Zero Out Data" option when you erase the drive) and reinstalling the original OS version.
Regards.

Snow Leopard Installation and Upgrade Tips

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Some things to know when planning to upgrade to Snow Leopard:
General Information
• Snow Leopard will only run on a Mac with an Intel processor. It will not run on any Mac with a PowerPC processor. PowerPC-based Macs include all PowerMac G3s, PowerMac G4s and PowerMac G5s, iMac G3s, iMac G4s, iMac G5s, all PowerBooks, all iBooks, and all eMacs. There is no workaround or hack that will get around this issue and get Snow Leopard to install and run on a PowerPC-based Mac.
• An Apple web page with the major enhancements and refinements in Snow Leopard can be found here:
http://www.apple.com/macosx/refinements/enhancements-refinements.html
• An article with a useful summary about Snow Leopard and 64-bit computing can be found here:
http://www.macfixit.com/article.php?story=20090826074252596
Tips
• IMPORTANT: As with any upgrade, you need to confirm compatibility of all your applications and drivers with Snow Leopard before you upgrade. Some major items of note:
Snow Leopard only ships with Java 1.6, so any applications built with Java must include support for 1.6 or the application will fail. Applications that currently use Java and are reported not to work include (but are by no means limited to) SPSS, ClamXav and Cyberduck.
Snow Leopard has severely restricted or in many cases eliminated the use of Input Managers, so applications that depended on those will fail. Logitech's mouse drivers appear to fall into this category.
Many applications that are or include menu bar components will fail if they depend on Unsanity's Menu Extra Enabler or the open-source Menu Cracker.
Apple has a list of software officially stated to be incompatible with Snow Leopard here:
http://support.apple.com/kb/HT3258
There's also an ongoing compatibility list is being maintained here:
http://snowleopard.wikidot.com/
Reports on that site are unofficial but may be useful.
• Snow Leopard no longer includes AppleTalk, so you will no longer be able to use any AppleTalk-only printers or other devices.
• Safari by default will launch in 64-bit mode on those systems that support 64-bit processing (which includes all Macs with Intel Core 2 Duo or Xeon processor). If you have Safari plug-ins that are not working, quit Safari, Get Info on the Safari application, and select "Open in 32-bit mode" and relaunch Safari.
• QuickTime Player X has some ability to trim and convert media, but no longer includes many of the former options available in QuickTime Pro. QuickTime 7 Player is available as an optional installation for those who still need the additional Pro features. If you have QuickTime 7 Pro installed in Leopard and are upgrading, the Snow Leopard installer should install QuickTime 7 Player automatically and preserve your Pro key. Apple has made no mention of a Pro version of QuickTime X.
• The Snow Leopard installer reportedly removes the Script subfolders from /Library/Scripts/, so if you are upgrading Mac OS X 10.5 Leopard, before performing the upgrade make a backup of the Address Book Scripts, Basics, Finder Scripts, Info Scripts, Internet Services, and Navigation Scripts subfolders and then copy them back to /Library/Scripts/ after installing the update.
This is the 1st version of this tip. It was submitted on August 28, 2009 by Dave Sawyer.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Welcome to the Apple Support Communities
As the computer froze during the Snow Leopard installation, it's possible that Snow Leopard wasn't installed correctly and Snow Leopard can't start, so you have to reinstall Snow Leopard. To do it, insert the Snow Leopard disc, hold the C key while your computer is starting and follow the steps to reinstall Snow Leopard. You won't lose anything you had saved

In limbo between Leopard and Snow Leopard - stupidly didn't back up

I've got an old-school black MacBook, about four years old now. I never cared enough to upgrade it to Snow Leopard, but now I want Lion. So, I borrowed my parents' five-license Snow Leopard install disc and started off on the journey to upgrade to Snow Leopard, download the App Store update, then download and install Lion. I didn't get far.
First, let me say that I didn't back up my hard drive. Like an idiot. Yes, I know it was stupid, so there's no need to say anything. My previous installs (a few clean re-installs) have gone without a hitch, so I figured I'd trust Apple and just run the installation without backing up. Dumb.
The Snow Leopard installation started fine, but was interrupted when the installer said the install failed. Restart, try again. Booting from the install DVD, things seemed to be going fine a second time around -- picked my language, got to the install set-up screen, picked Macintosh HD as my installation drive. And then things stopped working. The installer said my HD could not be written to and that it needed repair. So I went to Disk Utility to try that. Repair Disk wasn't available, so I clicked Verify Disk. That got interrupted when it said the disk needed to be repaired, after which the Repair Disk button was clickable. Tried to repair, but apparently my HD is screwed beyond the capabilities of Disk Utility.
I tried to reboot the MacBook from the HD, which Disk Utility said still had Leopard running on it. The computer wouldn't boot up. Safe Boot didn't work. So, without any other real options, I thought I'd try my luck by just trying the install again. Booted up from the install DVD, and ran into the same issues. Didn't magically fix itself, of course. So my MacBook is stuck in limbo between Leopard and Snow Leopard, won't boot from the HD and won't let me repair the disk when booted from the DVD. What do I do?
I plan to try a couple third-party disk-utility programs tomorrow (8/25/11) to recover the files on my HD. There's not much I care about on there (just some iPhone photos and my resume, really), so doing a clean wipe of the HD and installing Snow Leopard is an option. But I'd of course rather be able to recover my personal files. Is this possible at this point?
Another question I have regarding a clean wipe: If I end up having to clean off the HD and lose all my data, I'll lose the iTunes configuration for my iPhone. Will iTunes be able to import my apps and settings from my phone if I plug it in?
Thank you very much.

For a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f

Snow Leopard installation on Mac Mini has failed

Hi,
Does anyone know whether Snow Leopard checks what hard disk is installed in order to satisfy installation requirements as I've fitted an SSD Hard Disk Drive in my Macintel Mac Mini and installing Snow Leopard has failed (no longer boots into any Operating System previous nor upgraded. (Mac OS X 10.5.8 previously installed)).
Thank you for any advice.
Best Regards.

It may not have anything to do with a new drive installation. Snow Leopard has just "bricked" my Intel Mac Mini hard drive - the original one. The first attempt at installation failed, so I tried an erase and instal. It seemed to work - briefly but when I tried to restore apps and settings from a Time Machine back-up it "hung" with only one minute of restoration to go. Now the HD appears to have failed, since it is unable to find any system folder and booting up via the Snow Leopard disc and bringing up the disc utility shows a greyed-out HD drive.
Some people on the MacBook Pro forum report a similar problem with the hard drive after Snow Leopard installation.

My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

My 'old' files have been backed up onto time capsule (Leopard), I have upgraded to Lion (thro snow leopard) and now checking back to retosre some old files i can't see or access beyond the date I upgraded to Lion? Help please?

Use the manual methods.. but it is possible for TM to wipe the old files in trying to fit into the space.
Try Q16.. but read all the section 14-17
http://pondini.org/TM/FAQ.html

Snow Leopard Installation problems

What can I do if the Snow Leopard installation isn't completed, returning message " Installer couldn't replace system documents"?
I tried once, and system returned me the message above. So I restarted and tried installation again, but first I formatted the HD with the Mac os x Journaled file system. the I retried, but the installation didn't go to an end, returning the same message.
I'm stucked with a 2009 Macbook Pro. Before I tried installation, suddenly stopped working, booting it with no success, ending with a white wide screen.
Any ideas?
Many Thanks.
Ricky

Oh, it was the +File Open+ dialog, not a web browser window, is that correct?
Since you installed Snow Leopard as an upgrade over your existing system, and logged in to your existing user account, you may have had a +Login Item+ (processes that start and run at login) that needs to use "Events.app" (or maybe Events.app itself was the Login Item).
If you log out and log in, that message should pop up again, if it is related to a Login Item.
To see your Login Items, go to System Preferences Accounts pane +Login Items+ tab. The list you see are your Login Items. If you see anything that you no longer need, you should remove it. Look for something that may be related to this "Events.app" process.

Mac OX Snow Leopard installation from DVD failed

I tried to install the new OS Mac OS X Snow Leopard 10.6.3 (bought today) on my iMac. But is constantly failed (message: installation failed) and now it's in a loop where I can't get out. Because the only action there is is to try it again. What should I do?

What specific iMac model do you have? Does it meet these requirements?
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
To shut down the computer press and hold in the Power button until the computer shuts off. When you restart the computer you can eject the DVD as follows:
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
If you are currently running Leopard and it's still working then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If all is OK then reboot from your Snow Leopard DVD and try the installation again.
BTW, I encourage you to make a cloned backup of your current working system before trying to upgrade.

Mac-Windows-Connection failes after Snow Leopard Installation

I am dealing with 4 PCs at home – an IMac, a MacBookPro, a Dell Dimension and a Dell Precision Workstation. Before I installed Snow Leopard I could connect easily from my Macs to my PC via “Connect with Server” and the “sudo pico /etc/hosts” hint to rename my Windows-PC to real names (e.g. Dimension and Precision). After the installation I am prompted in OS X to give my account name and password again! And, of course, I don’t work anymore (wrong user name or password error). Because I put those information in long ago, I am not quite sure if I am putting the wrong Name/Password info in or if something happened during the Snow Leopard installation. I was never quite sure if “Name” meant the name of my Windows account I want to log into, or my Mac user name or a combination of both or the Server /Name thing, e.g. Dimension\Name. Just for info: My Windows-PCs can still connect without a problem to both Macs.
Any help is appreciated what information exactly to put in that **** Name/Password box that appears if I want to connect to a Windows-PC from my Mac. Or what else could have happened during the Snow Leopard installation that cut of the former available ability to connect to my Windows-PC from OS X.

I was able to see the other Windows XP computer and begin to connect. I was then presented with a login screen. I tried using the usual user name and password - no luck. I then formatted the user name as as follows:
user name: computer name\user name
password: as normal
And it worked. Specifically in my case:
user: cwy-pln2152\administrator
password: planning
This is what worked for me your mileage may vary.

Imposible continue the installation of Snow leopard 10.6 on a 1TB external hard disk, what can I do?

Imposible continue with the installation of Snow leopard 10.6 on a 1TB external hard disk. I did the same last year and I continued working but suddenly appeared the simbol with a folder and a question mark and I know this is a problem so I click in the format option to the hard disk and when I tried to install again Snow Leopard, 'cause I want to recover my backups with Time Machine, I couldn't continue because the installation didn't respond to the click in the Utilities option or to next step > continue . Please, What can I do? I'll wait for your answers. Thank you so much in advance.

Hello Melophage,
It is the original hard drive which should have been erased by the previous owner. The problem is, I cannot access it without any OS installed. Or maybe there is a bootable USB or DVD that can do it ?
Just an indication: when I boot without CD inserted in it, it shows a grey folder icon with a questionmark like this one:
Thank you for your help
PS: Yes, I am interested by the replacement pair of grey installation DVDs for my model. Where can I purchase this ?

How can I create a disk image of snow leopard installer disk from my Imac which runs it?

how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

Snow Leopard installation doesn't back up using TC Disk

Similar Messages

Maybe you are looking for