Snow Leopard Installer does not recognize Hard drive in disk utility.

I first at the suggestion of apple technicians because of other problems erased and partitioned hard drive. Now when I go to reinstall Snow Leopard it does not recognize the Macintosh Hard Drive, not even in disk utility. Any help will be greatly appreciate.

To make sure we understand everything correctly, you are saying that when you start up from the Snow Leopard DVD & run its copy of Disk Utility from the Utilities menu, it shows only the DVD installer disc itself in the list on the left of Disk Utility's window? There is nothing else there?
Also, what are you booted from when you try to make an image of the installer DVD, the DVD itself or something else? Are you using Disk Utility or something else to make the image?
This seems very weird for sure. If you were running from some hard disk copy of the OS, I would suspect that its copy of Disk Utility or some OS support file was corrupted, but if you are doing this from the DVD that is extremely unlikely unless the DVD itself is physically damaged.
Apart from that, pretty much the only thing left is a damaged hard drive or other hardware failure in your Mac.

Similar Messages

  • Leopard Upgrade Installer Does Not See Hard Drive

    I am trying to run the Leopard Upgrade installer on my G4 1Ghz x 2 PowerMac, but the installer thinks for a couple seconds and then tells me "Mac OS 10.4 or later can not be found on your computer" even though it is running 10.4.10.
    Also, if I go to the Startup Disk or Disk Utility window, my hard drive does not show up.
    Anyone found a solution to this problem?

    Good to know for the future. I agree with the writer. A progress bar would have been nice...
    I had other issues than that, unfortunately. The installation started off fine (meaning, it found my HD right away and started chugging along), then ended up with the "installation failed" error. After that, it couldn't detect the HD, either with Startup Disk or through the installer.
    That's when I ran Disk Utility. Seemed to work.
    Now, I'm tempting fate by trying things again. Glutton for punishment? Maybe.

  • Installer does not see hard drive, how do I mount

    Initialized Hard Drive with current volume and as mac extended and zero'd out memory. This drive came out of a PC that had been out of whack and drive was partitioned wrong in the PC. It worked fine to load mac OS 9.2.2 and has 18 gigs free. When I boot off of the Tiger disc it does not see the hard drive at all. Neither does the disc utility function. I checked the firm ware and it is up to date. Ran disk warrior and it says all is ok. Is it something simple?
    I can't figure out what it is I have over looked. Thanks

    Try this instead:
    1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
    1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
    If this is the second drive in your computer, be sure you have jumpered the drive as SLAVE (assuming the original hard drive is jumpered as MASTER.)

  • Internet recovery does not recognize hard drive

    Last week my internal hard drive failed in my 13-inch Macbook Pro from 2011 that had OS X Lion. I replaced it with a Western Digital 500 gb 2.5 inch SATA drive. I tried doing the Internet Recovery option, and when it comes to the part where it asks you to select a drive to install the OS, it is completely blank. Disk Utility only recognizes the optical drive and the emergency drive that the recovery operates off of. I opened up the computer and checked the connection to the hard drive, everything seems to be okay. What can I do to get the computer to detect this new hard drive so I can partition and format it, then download Lion again?

    I'l take it to get tested, I did consider that could be the problem, but I can hear it spinning when the computer powers on.

  • HELP! - Start up disks does not recognize hard drive!

    I tried reinstalling Tiger and my start up disk cannot see a hard drive. Would a new hard drive be a good solution?

    Hi Scoobie,
    You might want to start a new thread about this, but basically I would say that:
    - If you aren't sure what to buy, the easiest solution is probably to go to an Apple store or another Apple Authorized repair shop.
    - If you're feeling more confident about replacing it yourself, you basically need to know:
    1. What type of interface (e.g. SATA on new Mac desktops, I believe ATA on laptops and older Macs) your hard drive uses. You can find this, as you suggested, in System Profiler.
    2. What size hard drive your computer uses. Basically this is just 3.5" for desktops and 2.5" for laptops, although I think Mac minis use 2.5" hard drives.
    3. What speed you want. This might not really matter to you.
    4. How much capacity you want.
    I think that Pricewatch is an excellent place to compare prices of hard drives, but if you want to make sure you get a reliable drive and/or don't want to have to do quite so much hunting and comparing, Newegg might be the best place to go.
    Good luck,
    Greg

  • Mac has snow leopard and does not boot has grey screen

    IMac has snow leopard and does not boot has grey screen

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

  • I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    I have recently updated my OS from Leopard to Snow Leopard but now my external hard drive and even my iPhone are not recognized by my Macbook Pro!  Anyone have a suggestion??

    Zap the PRAM and Reset the SMC, then try again. If the problem remains, update to 10.6.8 and repeat.

  • My new macbook pro (Mountain Lion) will not log into my 1and1 server to connect to my e mail. My snow leopard macbook does not have this problem - Apple support say it is a 1and1 problem! do I have to wait for an update of Mountain Lion?

    My new macbook pro (Mountain Lion 10.8.1) will not log into my 1and1 outgoing mail server. ( It will receive mail - but does not send)My old Snow Leopard macbook does not have the same problem ( server settings etc. are identical) . Apple Support say its a 1and1 problem , 1and1 say it is an operating System prob - I have tried changing port numbers.

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Windows 8 does not see hard drive on Satellite A200

    Windows 8 does not see hard drive on A200.
    How to install?

    > with Vista works fine,
    Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
    Some notebooks HDD controller needs SATA driver in order to be able to install system.
    Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
    I guess you didnt any SATA drivers to install the Vista right?
    Set the BIOS to default and try to boot again using Win 8.

  • Snow Leopard upgrade - now iomega external hard drive cant be seen

    I've been using an Iomega External Hard Drive (RPHD-C) to run Time Machine as my back-up. Upgraded to Snow Leopard yesterday and - no external Hard Drive. Doesnt show in Disk Utility. Any ideas?

    Disconnect the disk and power it down for a few minutes, then reconnect, see if Disk Utility recognizes it.
    If no help, disconnect again, and Restart your Mac, then reconnect the drive.
    If it's connected via USB, try FireWire; or vice-versa.
    If still no help, try different ports, cables, and combinations of the two (sometimes a plug that works fine in one port won't make good contact in a different one).

  • TS3147 I seem to have lost fax capability with Snow Leopard. Does not appear in Print as before. Cant find fax in system Preferences. No drivers for fax found Bob Wines.

    I seem to have lost fax capability with Snow Leopard.
    Does not appear in Print as before. Cant find fax in System Preferences. No drivers for fax found.
    Initially said it was downloading software but no longer does this. Fax test works on HP site.
    Using HPC410aHP Photosmart Premium
    Any help would be appreciated.
    Bob Wines.

    Thanks for your detailled description of the faxmodem installation!
    I've tried this with Mac OS X v10.8 Mountain Lion and it works fine.
    I've to type "cupsctl WebInterface=yes" in terminal to see the interface.
    Does anybody know, if send faxes are saved somewhere?

  • I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup.  Its been several months and now when i try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there.  I a

    I recently moved and had to disconnect my WD My Pro Edition II 2TB external drive I had been using for backup. 
    Its been several months (many upgrades to the iMac software during this time), and now when I try to reconnect the external dire (Use a firewire cable) it does not recognize the drive is there.  I also tried "reloading" software from the Western Digital site, but after following all the instructions, it looks like my iMac doesn't support this software (I can't even locate it after I follow all the instructions.
    Thnaks,  for anyones ideas on how I can get this working again.....

    First of all, you do not really want to use their software; if you want a bootable clone, use either Carbon Copy Cloner or SuperDuper. If you simply want to drag and drop some files, you don't need software to do that. The important thing on any external drive is that you format/partition it correctly (Mac OS Extended (Journaled) and using GUID partition scheme). 
    Unfortunately, I don't know anything about WD drives or their software, so I don't have any idea what kind of backup you did. Having said that, it should still recognize the external even if it's outdated. Have you tried mounting it manually in Disk Utility? If you can get it to mount, you could (worst case scenario) just drag your stuff off onto your internal and then reformat the external.

  • I want to install Yosemite onto an external hard drive, and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

    iMac, Model Identifier iMac12,1 with 121.5" screen, 2.8 GHz Intel Core i7 processor, 8 GB 1333 MHz DDR3 memory, 1 TB internal hard drive, running Snow Leopard 10.6.8 from internal drive.
    I want to install Yosemite onto a 1 TB external hard drive (OWC) , and keep Snow Leopard installed on the internal hard drive. I want to be able to boot from either system, depending upon circumstance (at least until Yosemite is stable). Is this possible?

    It is possible. I'll let you read some articles that cover the setup:
    Starting from an external USB storage device (Intel-based Macs) - Apple Support
    or
    http://osxdaily.com/2013/06/22/boot-mac-external-drive/

  • IPhoto6 - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored from time machine, rebuilt the library and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline.

    iPhoto6 on iMac running SL - after a full reistall of Snow Leopard, iphoto does not display thumbnails. I've restored the library from time machine, rebuilt the library from iPhoto and run through the rebuild thumbnails function with no success. The files are there, I just get a dotted outline instead of the thumbnails. Does anyone have any other ideas on how to restore the thumbnails?

    Try the following:
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • G4 disk utility does not see hard drive

    I am helping someone with a G4 Quicksilver. She is running 10.4 but only has disks for 10.1 and 10.2. When I boot with the 10.2 CD, disk utility does not see the hard drive. I was thinking of connecting her computer to my MacBookPro (Intel, 10.5) via target disk mode and then running Disk Utility. Is that crazy? She is suffering from slow startup and grey screen. I've disconnected the periferals, safe booted, reset PRAM. She really needs Disk Utility.

    with the 10.2 CD, disk utility does not see the hard drive.
    Disk Utility from 10.2 should see the hard drive (the drive name should appear in the left box). If it does not, the drive is malfunctioning or has a loose cable.
    If you attempt to Verify, it will complain that there are illegal values in reserved fields in several different record types. Using this older Disk Utility to repair a 10.4 disk may cause more problems than it solves.
    As Tom \[Texas Mac Man] says, you should only repair 10.4 and later disks with 10.4 and later Disk Utility:
    HT2648- Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes
    • If you boot the regular Hard Drive (no CD/DVD required) while holding down the Shift key, it will do a quick check of the Hard Drive, then boot up in "Safe Mode". This will fix any simple Disk problems.
    • 10.4.3 and later can do a Disk Utility Verify of the Boot drive, "live" (but cannot Repair "live").

Maybe you are looking for