Snow Leopard Kernel Panics when trying to Force Quit Applications
I have been having this problem for about a month now. I am a heavy After Effects CS4 user so this happens to me primarily when working in AE, but definitely is not exclusive to AE. I am working on a 8 Core 2.66 GHz MacPro with 8 GB of RAM. The only other variables are an AJA KONA LSe capture card and a ATTO Celerity FC-41ES Fibre Card. The videocard is the standard ATI Radeon HD 4870. My drivers and software are all up to date.
Hi Mike,
I have a very similar setup and am also using AE CS4 heavily. I am experiencing exactly the same issues, and have found that it is the multi-processing rendering app (aeselflink) that is causing the kernel panic when you force quit.
I have reduced the amount of times this happens by making AE only use 6 of the 8 cores available, in the Memory & Multiprocessing preference section.
I save my work before rendering or previewing and cross my fingers !
Nic
Similar Messages
-
Late 2008 unibody MacBook Pro + 6GB RAM + Snow Leopard = Kernel Panic
Hi,
I've been trying to install Snow Leopard on my 2.8Ghz MacbookPro unibody (late 2008) with 6GB of RAM (4GB+2GB module).
At first, I did an upgrade of my existing Leopard drive, and when booting back in 10.6, everything was crashing (could not open a single web browser but Safari, for instance), and I was getting kernel panics each 10 minutes.
Then, I erased my boot disk and tried a clean install - I was getting kernel panics when installing! After 5 tries, it finally installed, and then I couldn't get through the welcome wizard the first time it boots.
So I removed the 4GB RAM module, and re-installed a 2GB one, and then everything was fine, not a single problem.
Take into consideration that that 4GB ram module was working perfectly under 10.5.8 (even while using the computer under a lot of stress) and passed all the hardware test.
Has anyone been successful at running Snow Leopard 10.6 on a late 2008 Macbook Pro unibody and 6GB of RAM?Wow, this is really interesting! I own a UniBody MacBook Aluminum 13" 2.4 GHz 5,1 (October 2008) and ordered a 4 GB RAM module from OWC to max out my system to 6 GB for virtual machine use. I'd just performed a clean install of Snow Leopard a couple of days ago and was excited about the new operating system along with that additional RAM. But guess what? When I inserted the new 4 GB stick I suffered a kernel panic within minutes! I tried moving the module around between the two slots and inserting it on its own without the additional 2 GB module and the same lockups occured every time!
Who ever would have thought this might be a problem with the new operating system rather than an incompatibility with the new module? OWC even agreed to refund my purchase but before I send the stick back I'll go ahead and install the original Leopard operating system and try again. Based on your experience I'm convinced the new stick will work and prefer more RAM than a newer operating system. Thanks to all of you for having posted this; I'd have never suspected an issue with Snow Leopard otherwise. In fact, I was hoping to be able to upgrade to 8 GB of RAM with 10.6. Turns out we may be better off with 10.5.8, at least for now! -
My Macbook has a Kernel Panic when trying to boot from Mac OS Install DVD
It might also be relevant that my Accounts Preference Panel crashes System Preferences when I try to open it. Disk Utility sees no problems with my drive, and booting into single user mode and doing a disk check has no results.
I am running a 2010 Macbook
2GB Ram
2.4 Duel Core Processor
Mac OS 10.6.8
Windows Installed Via Bootcamp, but problems occured before Windows was installed as well.
Anything Else that I need to add?Try reinstalling Snow Leopard. If you continue getting a kernel panic booting from the DVD, then either you have a bad installer disc or you have a hardware failure.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/. -
Apple USB modem and snow leopard = kernel panic !
Hello,
With Snow (10.6.1) I encounter very often a kernel panic when I turn off the
Mac.
When I check the console I have this:
Interval Since Last Panic Report: 670049 sec
Panics Since Last Report: 1
Anonymous UUID: F080CD9F-6604-4AF2-82F1-D43BE33F40C5
Tue Oct 6 07:38:13 2009
panic(cpu 1 caller 0x2a6ac2): Kernel trap at 0x08090001, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x00000660
EAX: 0x089ec400, EBX: 0x08e51000, ECX: 0x08e51004, EDX: 0x0145aff1
CR2: 0x00000000, EBP: 0x4c1ebc88, ESI: 0x087cd800, EDI: 0x00000000
EFL: 0x00010246, EIP: 0x08090001, CS: 0x00000008, DS: 0x00030010
Error code: 0x00000002
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x4c1eba78 : 0x21acfa (0x5ce650 0x4c1ebaac 0x223156 0x0)
0x4c1ebac8 : 0x2a6ac2 (0x590a50 0x8090001 0xe 0x590c1a)
0x4c1ebba8 : 0x29c968 (0x4c1ebbc0 0x8c7c9e0 0x4c1ebc88 0x8090001)
0x4c1ebbb8 : 0x8090001 (0xe 0x48 0x4c1e0010 0x4f0010)
0x4c1ebc88 : 0x1333880 (0x8e51000 0x8e51000 0x0 0x8e6b400)
0x4c1ebca8 : 0x133269d (0x8e72280 0x0 0x0 0x1)
0x4c1ebce8 : 0x133277c (0x8e6b400 0xb000001 0x3 0x2000)
0x4c1ebd28 : 0x3064df (0xb000001 0x3 0x2000 0x8dfad20)
0x4c1ebd68 : 0x30cedb (0x4c1ebdb0 0x0 0x4000000 0x0)
0x4c1ebd98 : 0x2f8b48 (0x4c1ebdb0 0x246 0x4c1ebe08 0xa80d6f0)
0x4c1ebdd8 : 0x2ee35c (0xa80d6f0 0x3 0x4c1ebed8 0x0)
0x4c1ebe28 : 0x2ee422 (0xa80d6f0 0x3 0x4c1ebed8 0x0)
0x4c1ebe88 : 0x469be6 (0x92634e0 0x4c1ebed8 0x4c1ebeb8 0x3007dc)
0x4c1ebef8 : 0x46b9dc (0x865b280 0x92634e0 0x8dfad20 0x0)
0x4c1ebf38 : 0x46baad (0x0 0xa 0x4c1ebf5c 0x1)
0x4c1ebf78 : 0x4ed85f (0x8dfad20 0x9811ee8 0x9fa62a4 0x0)
0x4c1ebfc8 : 0x29d3fd (0x9811ee4 0x2 0x10 0x82d32a4)
Kernel Extensions in backtrace (with dependencies):
com.apple.iokit.IOSerialFamily(10.0.2)@0x132e000->0x1336fff
BSD process name corresponding to current thread: pppd
Mac OS version:
10B504
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: Macmini3,1 (Mac-F22C86C8)
System uptime in nanoseconds: 5693599172824
unloaded kexts:
com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x105c000, size 0x12288) - last unloaded 98582035842
loaded kexts:
com.Logitech.Control Center.HID Driver 3.1.0
com.apple.driver.AppleHWSensor 1.9.2d0
com.apple.filesystems.autofs 2.1.0
com.apple.driver.MotorolaSM56KUSB 1.5.10
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.ApplePlatformEnabler 2.0.0d2
com.apple.driver.AGPM 100.8.15
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.NVSMU 1.1.7
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleLPC 1.4.6
com.apple.GeForce 6.0.2
com.apple.driver.AppleHIDKeyboard 1.1.5f1
com.apple.iokit.SCSITaskUserClient 2.5.1
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.nvenet 1.0.58
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.nke.ppp 1.5 - last loaded 158842070257
com.apple.iokit.IOBluetoothSerialManager 2.2.1f7
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.driver.AppleSM56KUSBModemFamily 1.1.12
com.apple.driver.AppleSM56KUSBAudio 1.9.16
com.apple.iokit.SM56KUSBAudioFamily 1.6.1
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.IOSurface 73.0
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.iokit.AppleProfileFamily 40
com.apple.driver.AppleSMC 3.0.1d2
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.nvidia.nv50hal 6.0.2
com.apple.NVDAResman 6.0.2
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2.1f7
com.apple.driver.AppleUSBBluetoothHCIController 2.2.1f7
com.apple.iokit.IOBluetoothFamily 2.2.1f7
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.1
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0
Model: Macmini3,1, BootROM MM31.0081.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 4 GB, SMC 1.35f0
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.91.19)
Modem:
Bluetooth: Version 2.2.1f7, 2 service, 0 devices, 1 incoming serial ports
Network Service: External Modem, PPP (PPPSerial), ppp0
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: HTS721010G9SA00, 93,16 GB
Serial ATA Device: PIONEER DVD-RW DVRTS08
USB Device: Hub, 0x050d (Belkin Corporation), 0x0264, 0x24700000
USB Device: EyeTV Diversity, 0x0fd9, 0x0011, 0x24730000
USB Device: Keyboard Hub, 0x05ac (Apple Inc.), 0x1006, 0x24100000
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc50e, 0x24110000
USB Device: Apple Keyboard, 0x05ac (Apple Inc.), 0x0221, 0x24120000
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000
USB Device: Apple USB Modem, 0x05ac (Apple Inc.), 0x1401, 0x06400000
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000
We can see the following information:
BSD process name corresponding to current thread: pppd
so this is a bug with the Apple USB modem and snow leopard !
you know what to do?
Thank you very much for your helpup !
the problem is still there -
Kernel panic when trying to use spotlight with external display attached
Having an issue with my fairly new MacBook Pro (purchased in April). When it's connected to an external display, I will get a kernel panic 100% of the time if I click on the Spotlight icon. The same also happens sometimes when clicking Documents or Downloads in the dock, but that is infrequent. This only happens with an external display attached and I have tried multiple external displays and cables. Following is the kernel panic report. I don't really know how to read it, so if anyone has suggestions they would be much appreciated.
Mon Nov 15 19:13:33 2010
panic(cpu 2 caller 0xa7cbfa): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0x7fc71000 0x0a5480a2, D0, P2/4
Backtrace (CPU 2), Frame : Return Address (4 potential args on stack)
0x5516a188 : 0x21b50c (0x5d42fc 0x5516a1bc 0x223974 0x0)
0x5516a1d8 : 0xa7cbfa (0xc922bc 0xd02940 0xca1424 0x0)
0x5516a278 : 0xb97640 (0x95db004 0x9875004 0x100 0xe3d7a00)
0x5516a2c8 : 0xb8e639 (0x9875004 0x100 0x5516a2f8 0xa6c6d7)
0x5516a2f8 : 0x170d9ce (0x9875004 0x100 0x438004ee 0x1)
0x5516a438 : 0xbb62bd (0x9875004 0x9865004 0x0 0x0)
0x5516a478 : 0xa85e63 (0x9875004 0x9865004 0x0 0x0)
0x5516a518 : 0xa8246f (0x0 0x9 0x0 0x0)
0x5516a6c8 : 0xa844a3 (0x0 0x600d600d 0x702b 0x5516a6f8)
0x5516a798 : 0xd47652 (0xc1d00041 0xbfef0033 0xbfee0034 0x857c)
0x5516a808 : 0xd56e38 (0xa09d000 0xa051d00 0x8 0x1)
0x5516a828 : 0xd7ba20 (0xa051d00 0xb 0x5516a848 0x3)
0x5516a858 : 0xd7c23b (0xa054000 0x1 0x5516a87c 0x0)
0x5516a888 : 0xd5c485 (0xa054000 0x7d3ef080 0x1 0x0)
0x5516a8d8 : 0xd1e68e (0x46559000 0x1 0x0 0x3)
0x5516a948 : 0xd1dd99 (0x46559000 0x1 0x2 0x3)
0x5516a978 : 0xd13ca7 (0x46559000 0x1 0x2 0x4654b000)
0x5516aab8 : 0xd4ccfe (0x4654b000 0x0 0x5516abcc 0x5516abc8)
0x5516ab68 : 0xd0fc93 (0x4654b000 0x0 0x5516abcc 0x5516abc8)
0x5516abe8 : 0x5659b8 (0x4654b000 0x0 0x5516ae3c 0x5516ac74)
0x5516ac38 : 0x566257 (0xd9de20 0x4654b000 0x97edf88 0x1)
0x5516ac88 : 0x566b0b (0x4654b000 0x10 0x5516acd0 0x0)
0x5516ada8 : 0x285bce (0x4654b000 0x10 0x97edf88 0x1)
0x5516be58 : 0x21d8ba (0x97edf60 0xa0d05a0 0x1fd7e8 0x5e43)
0x5516be98 : 0x210a3a (0x97edf00 0x0 0x9d4ba40 0xa0e9b60)
0x5516bef8 : 0x216c9d (0x97edf00 0x0 0x0 0x0)
0x5516bf78 : 0x295156 (0x9245328 0x0 0x0 0x0)
0x5516bfc8 : 0x2a148d (0x9245324 0x7fff 0x10 0x9245324)
Kernel Extensions in backtrace (with dependencies):
com.apple.GeForce(6.2.4)@0xd04000->0xdb9fff
dependency: com.apple.NVDAResman(6.2.4)@0xa16000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0xa09000
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x9e7000
com.apple.nvidia.nv50hal(6.2.4)@0x15d7000->0x19ebfff
dependency: com.apple.NVDAResman(6.2.4)@0xa16000
com.apple.NVDAResman(6.2.4)@0xa16000->0xd03fff
dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
dependency: com.apple.iokit.IONDRVSupport(2.2)@0xa09000
dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0x9e7000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
10H574
Kernel version:
Darwin Kernel Version 10.5.0: Fri Nov 5 23:20:39 PDT 2010; root:xnu-1504.9.17~1/RELEASE_I386
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 254626597586
unloaded kexts:
com.apple.driver.AppleUSBUHCI 4.1.5 (addr 0x1454000, size 0x65536) - last unloaded 196223967832
loaded kexts:
com.cisco.nke.ipsec 2.0.1 - last loaded 42574053426
com.parallels.kext.prl_vnic 5.0 9370.589435
com.parallels.kext.prl_netbridge 5.0 9370.589435
com.parallels.kext.prlusbconnect 5.0 9370.589435
com.parallels.kext.prlhidhook 5.0 9370.589435
com.jft.driver.PdaNetDrv 1.0.64
com.parallels.kext.prl_hypervisor 5.0 9370.589435
com.Logitech.Unifying.HID Driver 1.1.0
com.Logitech.Control Center.HID Driver 3.2.0
com.apple.driver.AppleHWSensor 1.9.3d0
com.apple.driver.IOBluetoothSCOAudioDriver 2.3.8f7
com.apple.driver.IOBluetoothBNEPDriver 2.3.8f7
com.apple.driver.AGPM 100.12.19
com.apple.driver.AppleHDA 1.9.9f12
com.apple.driver.AppleMikeyHIDDriver 1.2.0
com.apple.driver.AudioAUUC 1.13
com.apple.driver.AppleUpstreamUserClient 3.4.5
com.apple.driver.AppleMCCSControl 1.0.17
com.apple.driver.AppleMikeyDriver 1.9.9f12
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.iokit.CHUDUtils 364
com.apple.iokit.CHUDProf 364
com.apple.driver.AudioIPCDriver 1.1.6
com.apple.driver.AppleIntelHDGraphics 6.2.4
com.apple.driver.AppleIntelHDGraphicsFB 6.2.4
com.apple.kext.AppleSMCLMU 1.5.0d3
com.apple.driver.AppleGraphicsControl 2.8.68
com.apple.GeForce 6.2.4
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
com.apple.driver.AppleLPC 1.4.12
com.apple.filesystems.autofs 2.1.0
com.apple.driver.AppleUSBTCButtons 200.3.2
com.apple.driver.AppleUSBCardReader 2.5.8
com.apple.driver.AppleUSBTCKeyboard 200.3.2
com.apple.driver.AppleIRController 303.8
com.apple.iokit.SCSITaskUserClient 2.6.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 1.6.3
com.apple.driver.AppleUSBHub 4.1.7
com.apple.driver.AppleFWOHCI 4.7.1
com.apple.driver.AirPortBrcm43224 426.36.1
com.apple.iokit.AppleBCM5701Ethernet 2.3.9b6
com.apple.driver.AppleEFINVRAM 1.4.0
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleUSBEHCI 4.1.7
com.apple.driver.AppleAHCIPort 2.1.5
com.apple.driver.AppleACPIButtons 1.3.5
com.apple.driver.AppleRTC 1.3.1
com.apple.driver.AppleHPET 1.5
com.apple.driver.AppleSMBIOS 1.6
com.apple.driver.AppleACPIEC 1.3.5
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
com.apple.security.sandbox 1
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.1.11
com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
com.apple.driver.DspFuncLib 1.9.9f12
com.apple.driver.AppleProfileReadCounterAction 17
com.apple.driver.AppleProfileTimestampAction 10
com.apple.driver.AppleProfileThreadInfoAction 14
com.apple.driver.AppleProfileRegisterStateAction 10
com.apple.driver.AppleProfileKEventAction 10
com.apple.driver.AppleProfileCallstackAction 20
com.apple.iokit.IOSurface 74.2
com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
com.apple.iokit.IOSerialFamily 10.0.3
com.apple.iokit.CHUDKernLib 365
com.apple.iokit.IOAudioFamily 1.7.9fc4
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.9.9f12
com.apple.iokit.IOHDAFamily 1.9.9f12
com.apple.driver.AppleSMBusController 1.0.8d0
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.iokit.AppleProfileFamily 41.4
com.apple.driver.AppleSMC 3.1.0d3
com.apple.driver.IOPlatformPluginFamily 4.5.0d5
com.apple.driver.AppleSMBusPCI 1.0.8d0
com.apple.nvidia.nv50hal 6.2.4
com.apple.NVDAResman 6.2.4
com.apple.iokit.IONDRVSupport 2.2
com.apple.iokit.IOGraphicsFamily 2.2
com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
com.apple.iokit.IOBluetoothFamily 2.3.8f7
com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
com.apple.iokit.IOUSBMassStorageClass 2.6.5
com.apple.driver.AppleUSBMultitouch 206.6
com.apple.iokit.IOUSBHIDDriver 4.1.5
com.apple.driver.AppleUSBMergeNub 4.1.5
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
com.apple.iokit.IOUSBUserClient 4.1.5
com.apple.iokit.IOFireWireFamily 4.2.6
com.apple.iokit.IO80211Family 312
com.apple.iokit.IONetworkingFamily 1.9
com.apple.iokit.IOUSBFamily 4.1.7
com.apple.iokit.IOAHCIFamily 2.0.4
com.apple.driver.AppleEFIRuntime 1.4.0
com.apple.iokit.IOHIDFamily 1.6.5
com.apple.iokit.IOSMBusFamily 1.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 6
com.apple.driver.DiskImages 289
com.apple.iokit.IOStorageFamily 1.6.2
com.apple.driver.AppleACPIPlatform 1.3.5
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0Though it doesn't look like one of them is clearly responsible, it may be due to the presence of one or more of these kernel extensions:
com.cisco.nke.ipsec 2.0.1
com.parallels.kext.prl_vnic 5.0
com.parallels.kext.prl_netbridge 5.0
com.parallels.kext.prlusbconnect 5.0
com.parallels.kext.prlhidhook 5.0
com.jft.driver.PdaNetDrv 1.0.64
com.parallels.kext.prl_hypervisor 5.0
com.Logitech.Unifying.HID Driver 1.1.0
com.Logitech.Control Center.HID Driver 3.2.0
As a first debugging step, try rebooting in safe mode:
http://support.apple.com/kb/ht1455
and see if the panics occur then, though quite frankly it appears it may be an issue with your video card and/or drivers. -
Leopard Kernel panic - when rebooted main user account is gone
The title describes my problem well I think. My macbook running Leopard had a kernel panic. When I rebooted, the user account was gone. I booted from the Leopard DVD to reset the password, and reset the password of the root account and a mobile account - to which I have forgotten the password - with admin privileges. Neither one will log on. I'm pretty sure the mobile account will need the domain controller to successfully log on.
The root user I have never activated, so I suppose I can't use that. And without the ability to log in I can't seem to think of a way to activate it either.
There's a guest account available. And it works alright.Will either of the two accounts log in while booted in safe mode (hold down the shift key at boot time)?
-
Kernel panic when trying to start a OEL5u5 template vm
Hi,
I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm.
The log in the OVMM console shows the following;
Update VM Status - Running
Configure CPU Cap
Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap
run_cmd(args=['xm',
File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd
raise Exception('%s => %s' % (args, err))
>
The xend.log shows;
[2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm.
[2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused.
[2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3.
[2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .
[2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3
[2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model
[2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated
as always any help is much appreciated.
Edited by: StewCobley on 13-Nov-2012 06:23I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens..
Started domain 32_EM11g_OVM (id=4)
Bootdata ok (command line is ro root=LABEL=/ )
Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000180800000 (usable)
No mptable found.
Built 1 zonelists. Total pages: 1574912
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 1600.008 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Software IO TLB disabled
Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init)
Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line)
CPU: L2 Cache: 2048K (64 bytes/line)
general protection fault: 0000 [1] SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1
RIP: e030:[<ffffffff80271280>] [<ffffffff80271280>] identify_cpu+0x210/0x494
RSP: e02b:ffffffff80643f70 EFLAGS: 00010212
RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f
RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005
RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000
R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000
CS: e033 DS: 0000 ES: 0000
Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80)
Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000
0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00
0000000000000000 0000000000000000
Call Trace:
[<ffffffff802d09bb>] kmem_cache_zalloc+0x62/0x80
[<ffffffff8064cb00>] start_kernel+0x210/0x224
[<ffffffff8064c1e5>] _sinittext+0x1e5/0x1eb
Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef
RIP [<ffffffff80271280>] identify_cpu+0x210/0x494
RSP <ffffffff80643f70>
<0>Kernel panic - not syncing: Fatal exception
clear as mud to me.
are there any other logs that will help me?
I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.
Edited by: StewCobley on 13-Nov-2012 06:21 -
Kernel Panic when trying to install apps.
Everytime I try to install heavy apps like Final Cut Studio 2, Adobe CS3 och iLife 08 - I get a Kernel Panic after some installation progress (30-80%). It has something to do with "pkgextractor". It only happens on my Quad (clean Leopard install).
Tue Nov 6 12:58:11 2007
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x0000000000004014 PC=0x0000000000083148
Latest crash info for cpu 1:
Exception state (sv=0x63ce2a00)
PC=0x00083148; MSR=0x00009030; DAR=0x00004014; DSISR=0x40000000; LR=0x0008313C; R1=0x63D23870; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000802A0 0x002BE7D4 0x000E5618 0x000E6210 0x0024E6D8
0x00108638 0x00100154 0x002AF76C 0x002AF958 0x0030924C 0x000B24C8 0x55736572
backtrace terminated - frame not mapped or invalid: 0xF0080D70
Proceeding back via exception chain:
Exception state (sv=0x63ce2a00)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x58e44c80)
PC=0x914A2EA0; MSR=0x0200D030; DAR=0x2DFEC000; DSISR=0x42000000; LR=0x9583544C; R1=0xF0080D70; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: pkgExtractor
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC
panic(cpu 1 caller 0xFFFF0003): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x000AEA90 0x000B22F8
Proceeding back via exception chain:
Exception state (sv=0x63ce2a00)
PC=0x00083148; MSR=0x00009030; DAR=0x00004014; DSISR=0x40000000; LR=0x0008313C; R1=0x63D23870; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x00000000 0x000802A0 0x002BE7D4 0x000E5618 0x000E6210 0x0024E6D8
0x00108638 0x00100154 0x002AF76C 0x002AF958 0x0030924C 0x000B24C8 0x55736572
backtrace terminated - frame not mapped or invalid: 0xF0080D70
Exception state (sv=0x58e44c80)
PC=0x914A2EA0; MSR=0x0200D030; DAR=0x2DFEC000; DSISR=0x42000000; LR=0x9583544C; R1=0xF0080D70; XCP=0x00000030 (0xC00 - System call)
BSD process name corresponding to current thread: pkgExtractor
A!It's probably a logic board or connection issue.
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
An Apple User Group -
Kernel panic when trying to upgrade from OS X 10.7.5
Running an intel imac with os x 10.7.5, I tried upgrading to mavericks. After downloading and try to restart, I get a persistent kernel panic. Have used disk utility from recovery HD to repair permissions and repair disk. Still get kernel panic screen on restart. What now?
If you can't boot in the usual way, try a safe boot. During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. If you have more than one user account, you must be logged in as an administrator to carry out these instructions. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic report (with a name that begins with "Kernel" and ends in ".panic") under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List
from the menu bar. Post the entire contents of the report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post any other kind of diagnostic report, such as a hang report. -
Kernel panic when I try startx: edited again
I just reinstalled arch (slight mishap yesterday :oops: ) I'm running testing, have installed xorg, kde, ati stuff, etc. When I try to startx I get a "kernel panic not syncing". Has something to do with xorg configeration.
Any ideas :?:
If I just run xorgconfig no panic when I then run aticonfig etc panic.
For the moment I've given up on fglrx and am just trying radeon. the message I get says the system can't find the radeon driver :?:
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-96
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-160
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "** ATI Radeon (generic) [radeon]"
Driver "radeon"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "** ATI Radeon (generic) [radeon]"
Monitor "My Monitor"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1024x768"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
/etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/unimaps
# USECOLOR: use ANSI color sequences in startup messages
LOCALE=
HARDWARECLOCK="localtime"
TIMEZONE=Canada/Eastern
KEYMAP=us
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by hwdetect
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to disable it
MODULES=(radeon)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
HOSTNAME="normlx"
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
lo="lo 127.0.0.1"
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network-profiles
#NET_PROFILES=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng network netfs crond !kdm)
# End of fileKeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew -
Kernel Panic when I try to install OSX 10.3. Can anyone help?
I bought this iMac recently. It has OS 10.2.? installed and OS 9.1. When I try to install OS 10.3 I get a Kernel Panic when it reboots to start the installation. I ran the Norton Disk Doctor it had over in OS9 -- said it fixed some things and now ok but I still get a Kernel Panic trying to install Panther. I just want to re-format the whole computer with 10.3 and get rid of 9. How can I do that?
Thanks.KeepItSimple:
If you're getting a kernel panic when trying to install, then I'd start with RAM and the installation disks.
RAM: Panther has higher standards for RAM than does 10.2.x; if you have more than one RAM module, take one out (assuming that leaves you with at least 128 MB) and try again. If it panics again, try switching the RAM. As far a brand names go, I prefere Kingston or Azen RAM.
Installation Disks: if they're grey, they won't work. Grey installation disks are packaged with specific Macs, and only contain hardware drivers for that specific Mac. You need the retail version of the disks, which were sold in a black box. There are four CDs in the set, three of which are for installing the OS (the fourth contains Developer Tools). The three OS disks are black with a large silver X in the middle.
Good luck!
Andrew -
Kernel panic when using external hard drive for library
I have been using an external hard drive to manage my iTunes library for over a year. As of today, I have had three kernel panics when trying to use iTunes. I was downloading a purchase from the music store and the first panic occurred. Subsequent panics occurred immediately on startup of iTunes. Using the guest account (with default internal drive library settings), everything works fine. Both drives have been verified by Disk Utility and all software is up-to-date. No clue how to proceed.
Yes, but you need to have the external drive on and mounted when starting iTunes. You can add the external HD to your log in items list in System Preferences -> Accounts to handle this.
This explains how to move your files: iTunes for Mac-Moving your iTunes music folder: http://support.apple.com/kb/HT1449 -
Kernel panic when booting from DVD or external drive
Hey Folks,
I have a 13" MBP, seems to run fine for the most part.
However, I can't boot from DVDs or external hard drives. Disk Warrior, my and a tech support buddy of mine's OSX Snow Leopard DVDs, and external boot disks all cause a kernel panic when selected from the alternate boot menu when rebooting with alt.
The DVD/External spins up, the loading spinner goes for about 20-30 seconds, and then BAM - Kernel panic. I'd reinstall OSX... but I can't!
Any suggestions? I'd rather not send the computer to a tech for a week - I need it daily for work.Kernel panic log:
Fri Nov 26 11:42:49 2010
panic(cpu 0 caller 0x2a6ac2): Kernel trap at 0x00000000, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x00100000, CR4: 0x000006e8
EAX: 0x57cd9408, EBX: 0x57983dec, ECX: 0x06fa2b80, EDX: 0x07fb9c80
CR2: 0x00000000, EBP: 0x57983e18, ESI: 0x07fb9f00, EDI: 0x00000001
EFL: 0x00010206, EIP: 0x00000000, CS: 0x00000008, DS: 0x00000010
Error code: 0x00000010
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x57983ae8 : 0x21acfa (0x5ce650 0x57983b1c 0x223156 0x0)
0x57983b38 : 0x2a6ac2 (0x590a50 0x0 0xe 0x590c1a)
0x57983c18 : 0x29c968 (0x57983c30 0x7fb9f00 0x57983e18 0x0)
0x57983c28 : 0x0 (0xe 0x48 0x57980010 0x7fb0010)
0x57983e18 : 0x5389f2 (0x7fb5a00 0x7f62500 0x1 0x4fbe2a)
0x57983e78 : 0x536c27 (0x7f62500 0x7fb5a00 0x8006380 0x805e4c0)
0x57983f28 : 0x5371b8 (0x7f62500 0x8000140 0x0 0xffffffff)
0x57983f78 : 0x538e67 (0x7f62500 0x0 0x57983fac 0x1)
0x57983fc8 : 0x29c68c (0x7f85190 0x0 0x29c69b 0x74d03d4)
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10A432
Kernel version:
Darwin Kernel Version 10.0.0: Fri Jul 31 22:47:34 PDT 2009; root:xnu-1456.1.25~1/RELEASE_I386
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 109525048606
unloaded kexts:
(none)
loaded kexts:
com.apple.driver.AppleIntelYonahProfile 14
com.apple.driver.AppleIntelPenrynProfile 17
com.apple.DontSteal_Mac_OSX 7.0.0
com.apple.driver.AppleHDA 1.7.4a1
com.apple.driver.AppleGraphicsControl 2.8.16
com.apple.driver.AppleIntelNehalemProfile 11
com.apple.driver.AudioIPCDriver 1.1.0
com.apple.driver.AppleUpstreamUserClient 3.0.5
com.apple.driver.SMCMotionSensor 3.0.0d4
com.apple.driver.ACPISMCPlatformPlugin 3.4.0a20
com.apple.driver.AppleBacklight 170.0.2
com.apple.driver.AppleIRController 161
com.apple.driver.AppleIntelMeromProfile 19
com.apple.kext.AppleSMCLMU 1.4.5d1
com.apple.GeForce 6.0.0
com.apple.driver.DiskImages.SparseDiskImage 281
com.apple.driver.DiskImages.ReadWriteDiskImage 281
com.apple.driver.DiskImages.UDIFDiskImage 281
com.apple.driver.DiskImages.RAMBackingStore 281
com.apple.driver.DiskImages.HTTPBackingStore 281
com.apple.driver.DiskImages.FileBackingStore 281
com.apple.driver.AppleUSBTCButtons 1.8.0b4
com.apple.driver.AppleUSBTCKeyEventDriver 1.8.0b4
com.apple.driver.AppleUSBTCKeyboard 1.8.0b4
com.apple.driver.AppleUSBCardReader 2.5.0
com.apple.iokit.SCSITaskUserClient 2.5.0
com.apple.iokit.IOAHCIBlockStorage 1.5.0
com.apple.driver.AirPortBrcm43xx 410.91.20
com.apple.driver.AppleFWOHCI 4.3.4
com.apple.driver.AppleUSBHub 3.7.8
com.apple.driver.AppleAHCIPort 2.0.0
com.apple.driver.AppleUSBEHCI 3.7.5
com.apple.driver.AppleUSBOHCI 3.7.5
com.apple.BootCache 31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.driver.AppleEFINVRAM 1.3.0
com.apple.driver.AppleRTC 1.3
com.apple.driver.AppleHPET 1.4
com.apple.driver.AppleSmartBatteryManager 160.0.0
com.apple.driver.AppleACPIButtons 1.3
com.apple.driver.AppleSMBIOS 1.4
com.apple.driver.AppleACPIEC 1.3
com.apple.driver.AppleAPIC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 90.0.0
com.apple.security.sandbox 0
com.apple.security.quarantine 0
com.apple.nke.applicationfirewall 2.0.11
com.apple.driver.AppleIntelCPUPowerManagement 90.0.0
com.apple.driver.AppleHDAPlatformDriver 1.7.4a1 - last loaded 109517592692
com.apple.iokit.IOBluetoothSerialManager 2.2f18
com.apple.iokit.IOSerialFamily 10.0.2
com.apple.driver.AppleHDAHardwareConfigDriver 1.7.4a1
com.apple.driver.DspFuncLib 1.7.4a1
com.apple.iokit.IOAudioFamily 1.7.0fc16
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleHDAController 1.7.4a1
com.apple.iokit.IOHDAFamily 1.7.4a1
com.apple.driver.IOPlatformPluginFamily 3.4.0a20
com.apple.iokit.AppleProfileFamily 40
com.apple.iokit.IOFireWireIP 2.0.3
com.apple.driver.AppleSMC 3.0.1d2
com.apple.NVDAResman 6.0.0
com.apple.iokit.IONDRVSupport 2.0
com.apple.iokit.IOGraphicsFamily 2.0
com.apple.driver.DiskImages.KernelBacked 281
com.apple.driver.AppleUSBMultitouch 200.20
com.apple.iokit.IOUSBHIDDriver 3.7.5
com.apple.driver.BroadcomUSBBluetoothHCIController 2.2f18
com.apple.driver.AppleUSBBluetoothHCIController 2.2f18
com.apple.iokit.IOBluetoothFamily 2.2f18
com.apple.iokit.IOUSBMassStorageClass 2.5.0
com.apple.iokit.IOSCSIBlockCommandsDevice 2.5.0
com.apple.driver.AppleUSBMergeNub 3.7.5
com.apple.driver.AppleUSBComposite 3.7.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.5.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.6
com.apple.driver.XsanFilter 402.1
com.apple.iokit.IOAHCISerialATAPI 1.2.0
com.apple.iokit.IOSCSIArchitectureModelFamily 2.5.0
com.apple.iokit.IO80211Family 300.20
com.apple.iokit.IOFireWireFamily 4.1.7
com.apple.iokit.IOUSBUserClient 3.7.5
com.apple.iokit.IOAHCIFamily 2.0.0
com.apple.iokit.IOUSBFamily 3.7.8
com.apple.iokit.IONetworkingFamily 1.8
com.apple.driver.AppleFileSystemDriver 2.0
com.apple.driver.AppleEFIRuntime 1.3.0
com.apple.iokit.IOHIDFamily 1.6.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 6
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 281
com.apple.iokit.IOStorageFamily 1.6
com.apple.driver.AppleACPIPlatform 1.3
com.apple.iokit.IOPCIFamily 2.6
com.apple.iokit.IOACPIFamily 1.3.0 -
TS3742 Kernel Panic when I am updating the software
I am having the Kernel Panic when I am updating the software I tried 3 times every time the Kernel Panic thing appears, how can I resolve that?
Start with posting the latest KP report. Then, cite the update.
-
What is wrong with my user account?? Why do I get kernel panic when restart
Hi there. I got Leopard and was quite unhappy (don't think it was meant for a powerbook). So I started using Tiger again, and I flip flopped once or twice after the update came out for Leopard, thinking/hoping it would fix my problems. It didn't. I have given up on Leopard.
But, now Tiger seems to have a few problems of its own. I get the kernel panic when I restart my computer (telling me to restart), so I have to hold down the power button to turn it off and then turn it back on. Not a big deal, but if it shouldn't be doing that, I don't want it to, ya know? Never did it before Leopard.
My user account seems to be dysfunctional when it comes to downloading plug-ins for safari or firefox. I had to create a new user account and download the plug in from that account and then drag it into the HD to use it on my user account. I repaired disk permissions and booted from Tiger and did the same thing on there. After that, my user account is still not able to download that plug-in without getting errors (256)?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
Thanks!Leopard will work with your Powerbook, the question is, is all your software and hardware ready for it?
Is there a way to do a reinstall of Tiger from a blank slate, and be sure there won't be any problems?
You can start from a blank slate, but if you have a hardware problem that started to generate itself, a blank slate won't solve it. It is called an erase and install. The first thing to do is backup your data*:
http://www.macmaps.com/backup.html
Once that is done at least twice, we can start looking at solutions for kernel panics*:
http://www.macmaps.com/kernelpanic.html
- * Links to my pages may give me compensation
Maybe you are looking for
-
How does one print just one page of a long PDF file?
My mac wants to print all of the pages. Don't see a way to print just one page. Since the pages are numbered 6-19 and so on, I can't enter the specific page numbers to be printed.
-
Sorry for the newbie question, but I'm really in a bind right now. I am using a spry tabbed pannel on my company's website that I'm in the process of designing, and yesterday it worked perfectly. At the end of the day yesterday, I did something and I
-
Why wont itunes install on my computer
so im trying to download itunes and after i click finish to install it never shows up... and its forsure not on my computer ..i check everywhere!! please help thank you!
-
Sorry this is the 1st time on here. The diagnostic test said that I did not have a safe connection. I have even went as far as to delete Itunes from my computer twice and reinstall, but still luck. I have read several suggestions on here, but still t
-
The Or operator is not working
I have Crystal Reports XI, and I can't get the Or operator to work in the record selection formula. I can get each individual line to work, but once I put an Or statement in, nothing shows up in my report. {CP_ORDLIN.QTY_BO} > 0 Or {CP_ORDHDR.CODE_S