Snow Leopard PPTP VPN Client with Microsoft Networks
I have Snow Leopard machine working fine in local Microsoft network, in this environment it's easy setup wins server, in this case i can see and access all windows machines, but when I access my office network via PPTP VPN I can only see windows machines over finder, when i try to access any machine the connection fails, if i use a windows xp or vista it works fine. How i can tell to VPN the wins server address?
I have Snow Leopard machine working fine in local Microsoft network, in this environment it's easy setup wins server, in this case i can see and access all windows machines, but when I access my office network via PPTP VPN I can only see windows machines over finder, when i try to access any machine the connection fails, if i use a windows xp or vista it works fine. How i can tell to VPN the wins server address?
Similar Messages
-
Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.
-
How to configure Multiple PPTP VPN Clients on cisco 3g supported Router
I want the router to be a PPTP VPN client to 2 independent PPTP servers, both are in different cities in Cisco routers. I have tested with one on cisco 1841 aqnd its working fine; but when I add the 2nd, its using vpdn-group 1 and therefore connecting to the wrong PPTP server:
here is the config for the one that works:
vpdn-group 1
request-dialin
protocol pptp
rotary-group 0
initiate-to ip xxx.xxx.xxx.xxx
interface Dialer0
mtu 1450
ip address negotiated
ip pim dense-mode
ip nat outside
ip virtual-reassembly
zone-member security private
encapsulation ppp
ip igmp query-interval 125
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 1
no peer neighbor-route
no cdp enable
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap-v2 ms-chap eap chap pap callin
ppp eap refuse
ppp chap hostname xxx@xxx
ppp chap password 7 xxxpassword
But if I create a vpdn-group 2 and a Dialer1 interface, with dialer-group 2, its still attempting to connect to the IP in vpdn-group 1 - how do I get it to use the 2nd vpdn-group, or how do I make this work? and which cisco 3G Router you prefer because these are remote sites and only 3G Internet service is available.I want the router to be a PPTP VPN client to 2 independent PPTP servers, both are in different cities in Cisco routers. I have tested with one on cisco 1841 aqnd its working fine; but when I add the 2nd, its using vpdn-group 1 and therefore connecting to the wrong PPTP server:
here is the config for the one that works:
vpdn-group 1
request-dialin
protocol pptp
rotary-group 0
initiate-to ip xxx.xxx.xxx.xxx
interface Dialer0
mtu 1450
ip address negotiated
ip pim dense-mode
ip nat outside
ip virtual-reassembly
zone-member security private
encapsulation ppp
ip igmp query-interval 125
dialer in-band
dialer idle-timeout 0
dialer string 123
dialer vpdn
dialer-group 1
no peer neighbor-route
no cdp enable
ppp pfc local request
ppp pfc remote apply
ppp encrypt mppe auto
ppp authentication ms-chap-v2 ms-chap eap chap pap callin
ppp eap refuse
ppp chap hostname xxx@xxx
ppp chap password 7 xxxpassword
But if I create a vpdn-group 2 and a Dialer1 interface, with dialer-group 2, its still attempting to connect to the IP in vpdn-group 1 - how do I get it to use the 2nd vpdn-group, or how do I make this work? and which cisco 3G Router you prefer because these are remote sites and only 3G Internet service is available. -
Unable to install Client for Microsoft Network
Bonjour guys, i'm having a terrible issue. I'm running Vista Sp2 Home Premium Edition, and i was having an IP adresse issue, i was getting 169.etc, and couldn't go online. So i tried various things to solve the issue, including uninstalling the various componets
of my Connection, including "Client for Microsoft Network".
When i rebooted the PC, and installed my Wifi Usb dongle and its software, the IP issue was solved (192.etc), but with a twist. Now, i can't go to website using their Urls (www.google.com), i can only access them via their IP adresses (173.X.X.X)
I verified/changed the DNS, no improvment.
I deactivated/activated the firewall, no improvment.
I verified the DHCP, it's working fine.
So i checked the propreties of the Connection, and noticed that the only thing that was missing, was "Client for Microsoft Network", which i tried to install, abut got an error:
"Could not add the requested feature. The error is: The remote procedure call failed"
So i went to services.msc, checked the various services, RPC started, DNS client started, DHCP started, server started
Then i decided to uninstall the SP2 upgrade, and reinstall it, but the issue still remains.
Can you help me re-instal the Client for Microsoft Network ?Hi,
You can run SFC command to check your system file:
http://support.microsoft.com/KB/929833
Alex Zhao
TechNet Community Support -
Snow Leopard Server VPN and other Servers
I am thinking of deploying Snow Leopard Server at work using the Mac MiniServer option. We have a few Macs that we would like to manage their settings with. We also have Active Directory. I plan to use Open Directory with the Mac then use kerbos for logins.
My question is if I use the Snow Leopard Server VPN with the Macs, will the users be able to access other resources on the LAN like Active Directory Shares, Exchange, and internal Intranets? Or only the Snow Leopard Server?
Thanks,
WillGonzIt sounds like you will have 2 different kerberos realms, one in OD and one in AD.
If you want them to use the same realm (the AD one) you need to look at a "golden triangle" setup.
If you want to authenticate the VPN connection using Kerberos I suspect you need to be able to reach the KDC server from Internet before the VPN is up. That would mean it needs to have a public IP and same name as on the LAN(?).
As an alternative a Radius connection for the VPN authentication from the Mac to an AD/Radius server might be possible. -
SBS2008 Client for Microsoft Network issues
Hi Everyone,
I'm working on a client server and was called in after some strange IP issues. I found that Client for Microsoft Networks was missing and am unable to get it reinstalled.
Originally, I got an error that a Timeout occurred (I don't have the exact error because it isn't what I'm getting anymore).
After a bunch of reboots and a few attempts to reset the network stack with netsh (ipv4, ipv6, winsock), I'm now getting an error when I try to install the Client for Microsoft Networks that the RPC call failed.
The RPC service is running.
I'm at my wits, end, and at a total loss.
Can anyone think of any way to magically reinstall Client for Microsoft networks? Powershell? anything? ha.
Thanks.Well it looks like it found and repaired one thing. Lets reboot and take a look at the network settings. If you can't install the Client again we're gong to go through a little more advanced diagnostic which should be fun :)
Download the Sysinternals tools procmon,
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx this will capture everything the system does so it'll give a ton of information. The steps are as follows.
1) Open procmon
2) DONT FILTER ANYTHING, when prompted to click the 'cancel' button on the filter window
3) Stop the capture (Ctrl+E on the keyboard)
4) Get to the Networking Properties and do every step to install the Client EXCEPT for the step that throws the error
5) Start the capture (Ctrl+E)
6) Trigger the error
7) Stop the capture
Save the PML file and upload it.
-GreenlightTech -
ASA , Cisco VPN client with RADIUS authentication
Hi,
I have configured ASA for Cisco VPN client with RADIUS authentication using Windows 2003 IAS.
All seems to be working I get connected and authenticated. However even I use user name and password from Active Directory when connecting with Cisco VPN client I still have to provide these credentials once again when accessing domain resources.
Should it work like this? Would it be possible to configure ASA/IAS/VPN client in such a way so I enter user name/password just once when connecting and getting access to domain resources straight away?
Thank you.
Kind regards,
AlexHi Alex,
It is working as it should.
You can enable the vpn client to start vpn before logon. That way you login to vpn and then logon to the domain. However, you are still entering credentials twice ( vpn and domain) but you have access to domain resources and profiles.
thanks
John -
Why does iphoto complete lockup my computer ? Snow Leopard 10.6.8 with iPhoto 9.2.3
Why does IPhoto completely lock up my Intel Core Duo ? IPhoto seems to work OK until I try to edit a phot, then get visual artifacts on the screen and computer is completely locked up after 8 hours.
Snow Leopard 10.6.8 with IPhoto 9.2.3.Create a new account (systempreferences -> accounts) make a new Library, import some shots and see if the problem is repeated there.
Regards
TD -
The hard drive on my Mac Book Pro failed last week. I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer. I had Mt. Lion on the old drive that I had purchased last year but no boot disc made. I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either. How do I get something to run the software that I had on the old drive?
Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else. -
I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit? -
Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.
I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2 -
Is Snow Leopard 10.6 compatible with Final Cut Studio 7?
Is Snow Leopard 10.6 compatible with Final Cut Studio 7?
Currently running 10.5.8 and pondering an upgrade. I have to go from snow leopard to lion, and I'm wondering what i'll applications I'll have toIt is Final Cut Studio 3 or Final Cut Pro 7 and yes it woarks fine in snow or lion
-
Script to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks
Hi, I am trying to find a way of using a batch file or vbscript to disable Client for Microsoft Networks and File and Print Sharing for Microsoft Networks on a Network Interface Controller.
I've done some searching on the internet and I can see some suggestions to locate the Setting ID of the NIC and then remove the value from the "Bind" string under "HKLM\SYSTEM\CurrentControlSet\Services\LanmanServer\Linkage" and "HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Linkage"
I tried this but it didn't seem to uncheck itself from the NIC properties under NCPA.cpl
Can someone help me?http://social.msdn.microsoft.com/Forums/vstudio/en-US/b0407073-07bc-462b-9de9-7295be5fa183/disable-file-and-printer-sharing-for-mircorosoft-networks?forum=csharpgeneral
¯\_(ツ)_/¯ -
I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
many thanks Carl.You must boot from another drive in order to erase the system drive.
Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
Allan -
when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?
Maybe you are looking for
-
How do I fix super slow internet - all browsers are affected
There is some problem with internet connectivity with my MacBook Pro, but I cannot figure out how to resolve it. Speedtest.net is measuring my internet speed at download speeds of 0.88MBps and upload of .84Mbps. Other devices utilizing the same rou
-
No sound over hdmi, ION2 system
Hi there I'm trying to get sound output over hdmi connection without any success. I'm totally out of ideas as I tried it with openelec.tv and a xbmc live system. All the time I never heard anything. I tested with speaker-test and mplayer. I tried stu
-
ACR 8.7 release candidate, Nikon D750, Lens corrections tab
I capture images using a Nikon D750 & AF-S NIKKOR 24-120mm f/4G ED VR lens with image quality set for NEF (RAW) + JPEG fine & image size set for Large. Slot 1 card saves the NEF files & slot 2 card saves the JPEG files. I download the images using Br
-
What a have is a VI that uses the following SUbvi's, starts with FP OpenVI, then FP Create TagVI, into a "While Loop" which contains a FP ReadVI outputting data into a Index ArrayVI outputting to a Display (DBL). This shows the output of a FP-AI-100
-
Hi, I am trying to figure out why Aperture always starts sorting an album on "Manual" by default? Is it possibel to save another default for sorting? If so, where? I can get it to sort the main folders (Projects) by name and the sub-folders (Albums)