Snow Leopard refuses to install updates

Updates 10.6.1 and 10.6.2 refuse to install on imac. Installation gets to the selection of the drive to install on but refuses to see the mac hd as a legitimate drive. During installation of snow leopard it dumped an image of the previous installation onto my external hard drive (130gb) via the trash can. Deletion of trash can contents fixed this.

Why did snow leopard dump an image of my hard drive onto my external drive?
The updates were taken as downloads from your update section not from the automatic updates software.
How can you guarantee that the dodgy software will be fixed by yet another update which may or may not even recognise my hard drive. This is the first time my hard drive has been considered an unacceptable area for download installation. What caused it?
Why has Apple allowed this situation to develop?
I cannot afford to devote a month's download capacity to fixing dodgy software. Can you send me a disc? Last time I downloaded a file of this size I had 1200 dropouts. One can only imagine what that does to the quality of the download.
What is meant by using terminal to .....?

Similar Messages

I have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update?

i have a 2008 imac with snow leopard. i installed update 10.9.3 not realizing it's best for Maverick's users. Now my Itunes 11.2.2 won't burn playlists to CD.   Anyone else with this problem? CAn I uninstall the 10.9.3 update? Also my HP scannerwill not save the displayed scanned document since this update! it just saves gray.

If you have your old system backed up then erase the drive and restore your backup. If you don't have a backup then backup your entire Home folder. Erase the drive and install Snow Leopard after which you can restore your Home folder from the backup.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Or you can:
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

HT1338 After reloading OSX 10.6 Snow Leopard iMac wont install updates

iMac wont update after reinstalling OSX 10.6 Snow Leopard

If I recall correctly the gray bar could indicate that a firmware update is installing, or that the system is checking the hard drive.
I've run out of suggestion since without the Install DVD's we can't boot the system to run Disk Utility in order to verify the hard drive. It might be a good idea to give Apple a call to see if they can help you get a set of replacement install discs.
The other option is to find another working Mac and connect the two systems via a compatible Firewire cable. Once connected turn on your iMac with the issue and hold down the 't' key in order to place the iMac into the Target Disk Mode. This should allow your other Mac system to mount your iMac's hard drive as an external volume. If nothing else it would allow you to backup your important files.
http://support.apple.com/kb/HT1661
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8443.html

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?

How do I partition my MacBook Pro so I can keep Snow Leopard and also install Mountain Lion?
I want to install the latest OS, but I already know that I will lose a lot of my software unless I can partition the hard drive and have two "bootable" drives.
How do I retain everything I have, partition the drive, then reloa the software I own according to which OS it will work under?

msmedia wrote:
I do not currently own OS X ML.
I am currently running OS X (10.6.8 Snow Leopard) on my MacBook Pro. It has a 2.8GHz Intel Core 2 Duo Processor. I want to upgrade to Mountain Lion, but many of my software titles will not operate with ML and I cannot afford to replace some of them (Adobe Creative Suite, for e.g.)
After I back-up my HD and then partition the HD, how do I use the back-up to reinstall what I want to the SL partition, and then place the rest on the ML partition.
I have not done what you want to do, so can only offer some general thoughts in support. Take value from the following where you can. No guarantees.
If it was me, I would use a disk clone utility (e.g. Carbon Copy Cloner) to image the existing Snow Leopard disk to an external drive. Then verify that the external drive would boot and run Snow Leopard normally.
I would then purchase and download the Mountain Lion upgrade installer, but not run it. Use Lion Diskmaker to make a bootable USB stick, and perform a clean install of Mountain Lion, replacing the Snow Leopard on your MBP. This way, you make absolutely certain that no third-party drivers or other SL cruft remains to make Mountain Lion unstable. Update to latest ML point release. Fix permissions. Let TimeMachine make a full backup of your ML installation to a different external drive. Then turn of Time Machine.
In Disk Utility, use the + sign at the bottom of the ML partition to add another GUID, HFS+ Journaled partition for Snow Leopard. Resize to taste. Name it differently from your ML partition. Exhale.
Now ideally, you would like to reverse the external clone and put it back into the new SL partition. Then fix permissions. And demonstrate that you can boot into individually stable OS X installations. This would save you alot of work. Resist copying your home directory into ML just yet.
If you cannot successfully achieve the preceding paragraph, you will be faced with a full SL and application reinstall.
The ~/Library contents for SL and ML are sufficiently different that you do not want to mix them. You may want to salvage Safari bookmarks.plist. And, ML created folders in the home directory may have different permissions or ACL settings than in SL. So, my rule of thumb would be to copy folders that you created in SL, and only the contents of matching named OS created folders such as Music, Pictures, Downloads, etc.
For each operating system, you probably want the Time Machine settings to exclude the opposite OS X partition. If you use the same host name in Sharing prefs, then you will mix SL and ML backups on the same Time Machine back up drive. If you use different host names, they will be distinct folders in the Time Machine backups.backupdb and allow discrete restores per host. You may also want to gag Spotlight from indexing the opposite OS X partition.

If you lost your install CD's for an iMac7,1. Can you use Snow Leopard to reboot/install?

If you lost your install CD's for an iMac7,1. Can you use Snow Leopard to reboot/install?

Best answer; see AnaMusic above.
Will SL do? Yes, provided you use the SL retail disc. A grey disc from another Mac will not work.
A few considerations -
Be warned that printer drivers, and scanner drivers in particular will almost certainly need updating for SL. That could be a problem if the printer or scanner is more than a couple of years old.
Many third party applications (and some Apple ones) may need updates for SL (Adobe particularly), so check with the vendors for compatability before you upgrade.
You'll need Rosetta to run PPC apps like Appleworks and many MS Office or Adobe versions. Ensure you select it from the 'optional installations' when installing SL.
Note also that any bundled applications that came with your Tiger original discs (iLife in particular) are not included on retail OS versions.

Can I purchase the OS X 10.6 Snow Leopard version but install the 10.5 Leopard

Can I purchase the OS X 10.6 Snow Leopard version but install the 10.5 Leopard instead?

*Mac OS X 10.5 Leopard installation system requirements*
http://support.apple.com/kb/TA24950
Leopard is no longer available at the Apple Store *but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753)*.
Installing Mac OS X 10.5 Leopard
http://support.apple.com/kb/HT1544
Mac OS X 10.5 Leopard Installation and Setup Guide
http://manuals.info.apple.com/en/leopard_install-setup.pdf
After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
 Cheers, Tom

Entourage crashed after loading Snow Leopard 10.6.7 update

I installed the Snow Leopard 10.6.7 update yesterday and immediately Entourage would no longer function properly. None of the folders (inbox, sent, drafts, etc) are visible and the options at the top of the screen do not work. Any suggestions would greatly be appreciated.

I had a similar problem and solved it.
Mac book (2010) 10.6.8, Printer: Xerox Phaser 8560.
It started when I did a printer driver update.
I'd print and then it would take 1-2 minutes just to get a print dialog box. -Frustrating.
My console had some strange msgs about printer not authenticating and job not responding.
So I deleted the printer, created it again using bonjour to find it, and changed the driver from the auto-selected driver(my printer model) to Generic PostScript.
Now speed is back to immediate and it is printing fine.
I suspect the manufacturer's driver is engaing something that is not compatible with the system.

If I upgrade my leopard computer to snow leopard via an old update disc, can I then upgrade to Mountain Lion for the $20 deal?

If I upgrade my leopard computer to snow leopard via an old update disc, can I then upgrade to Mountain Lion for the $20 deal?

Yes, provided your computer meets the system requirements and you have updated Snow Leopard to 10.6.8:
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
Apple - OS X Mountain Lion - Read the technical specifications.
Macs that can be upgraded to OS X Mountain Lion
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
Xserve (Early 2009)
I would also read this:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process.

Have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?

have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?

Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)

How do I uninstall snow leopard and re-install OSX leopard?

How do I uninstall snow leopard and re-install OSX leopard?

Sorry to hear that, Snow Leopard runs as fast or faster than either Tiger and Leopard did on my Jan 2006 Early Intel iMac on 2GB of RAM?
Before you blame Snow Leopard, run the Extended Apple Hardware Test and check the SMART status of your Hard Drive to make sure that you do not have another problem.
http://support.apple.com/kb/HT1509
http://www.macupdate.com/app/mac/14825/smartreporter

Hello, I have a 2009 iMac, and my harddrive has failed several times now, and now I need to re-install snow leopard but my install DVD is damaged and I have bought a new snow leopard disc. However my iMac will not read the disc at all ?

Hello, I have a 2009 iMac, and my harddrive has failed several times now.
I tired to reinstall snow leopard with the install DVD that came with my iMac. However the disc is damaged so I bought a new Snow Leopard but my iMac wont read the new disc, it just stays in the apple logo screen, I have tired safe boot, holding down the "C" key on startup and tried using disc utility but getting nowhere.
Please help. Thanks.

Might be related, if your hard drive is a 1TB drive,it could be a Seagate drive.
The drives are known to fail and your iMac maybe covered for free replacement under the Apple's Seagate hard drive replacement program until April 12 of this year.
I Believe the 2009 models are covered under this replacement warranty.
You can find out if you are eligible here.
http://www.apple.com/support/imac-harddrive/
Good Luck!

PLEASE HELP ME - I am not very tech savy and I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me ;-(

I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me

krystiefrommorayfield wrote:
I am not very tech savy & I thought I hadn't installed Mac OS X Snow leopard .After I
installed it I went to tether with my Iphone but Itunes wont even recognise it and no one will help me
You connect your iPhone to iTunes through the Sync Process...
See Here
Syncing with iTunes
From Here
http://www.apple.com/support/iphone/syncing/
http://www.apple.com/support/iphone/

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : "mac os x snow leopard cannot be installed on this computer" And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1

Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :
"mac os x snow leopard cannot be installed on this computer"
And My Mac Configuration details: Model Name: Mac Mini Model Identifier: Macmini2,1
Intel Core 2 Duo
1.83Ghz
l2Cache: 2mb
Memory : 2GB
Bus Speed: 667MHz
Please help me......
Thanks

Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
Please suggest me what to do???
Thanks

Someone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

omeone meet the problem, I am not abble install mac OS 10.6 snow leopard on intel based machine, (intel core 2 duo, 2,8 ghz, 4GB RAM, 320 GB HDD, OSX 10.5.8) system every time wrote "OS X snow leopard cannot be install on this machine" please help, Majo

It is retail disk, i bought it in apple store. I also resetter PRRAM and SMC and checked disk. I also tried clean installation and upgrade, nothing works, after run installation program after few seconds wrote: OS X Snow Leopard cannot be install on this machine :-(
Thank you for your answer
Majo

If I upgrade from Mac OS v 10.5.8 to 10.6 Snow leopard will my installed applications such as timemachine and MS Offfice for Mac 2008 still work?

If I upgrade from Mac OS v 10.5.8 to 10.6 Snow leopard will my installed applications such as MS Office for Mac 2008 still work? Will time machine files created under OS 10.5 still be accessible?

Yes

Snow Leopard refuses to install updates

Similar Messages

Maybe you are looking for