Snow Leopard remote install hangs with no entry sign
Hi,
I'm trying to install snow leopard on a replacement hard drive for my macbook air (mba). I'm using a windows machine to do this (win). The mba has found the win's optical drive and I've started the installation process. At first I get the appl symbol with a spinning globe beneath then it turns to the standard loading symbol. After a while though the loading symbol freezes and the apple logo is replaced by a no entry type sign.
I've tried this three times now. Any ideas?
Thanks
Think I've got it! A related post elsewhere mentioned command-option-p-r during boot to clear out the PRAM / NVRAM whatever they are. Anyway tried thaat a couple of times with no success. Then read somewhere else that you should hold the keys down til the third chime. Anyway tried this and it seems to have worked!
Similar Messages
-
Snow Leopard: Media Browser hangs iWeb with perpetual beachball.
After installing Snow Leopard, iWeb may hang with a perpetual beachball when you close a large file folder in iWeb's Media Browser. You will then have to force quit and restart iWeb to continue work. All work since your last Save will be lost. Until this is fixed, be sure to Save your work before opening and closing file folders in the Media Browser in iWeb.
After finishing an iMovie project and clicking on:
Share -> Media Browser
iMovie appears to be converting the file to prepare for sharing, but it never appears in the Media Browser.
When I tried to repeat the same steps to try again - the file size ("mobile", for example - 480x272) is faded, as if it had been done - it won't let me try again.
I tried again with a different file size (640x360), with the same results: it appears to be working, but never shows up in the Media Browser. -
I bought a MacBook Pro 13" last week with Snow Leopard pre-installed. Now I am looking to upgrade to Lion. Is there a 30 day window to do that for free? I cannot review my App Store id since I do not have a Credit Card. What to do in this case to install Lion. Please help.
Hi,
Use this Info to Contact Apple Support in your Country
http://www.apple.com/in/support/
(91) 1800 4250 744 or (91) 80-4140-9000 -
when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?
Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive? -
Macbook Pro with snow leopard pre-installed
Does anyone know when the retail apple store locations will have the 13inch MBP pre-installed with snow leopard? i called up the local apple stores in my area and they still dont have these yet, maybe they need to get rid of old stock? i understand that snow leopard comes pre-installed when purchased online but i dont want to do that.
Welcome to Apple Discussions!
Are you sure? You realize if you ever find a software title that is not Snow Leopard compatible, but is with older versions of Mac OS X, and you buy a Mac with Snow Leopard prebundled, there likely will be no way of going back to Leopard or earlier. This has been the case with all new Macs once they come prebundled with a new operating system.
Unless you are 100% certain of Snow Leopard compatibility, I would be happy to have this reprieve. -
I have recently purchased a macbook pro 2011 that does not have original install discs. The macbook does not currently have an OS and internet recovery does not work. Am I able to purchase an OS like Snow Leopard that actually has a disc and install it onto this macbook?
Does your Mac meet the hardware specs for Snow Leopard?
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Allan -
How can I re-install Snow leopard having installed Lion? The disk supplied states that I cannot use the version of 'Install Mac OS X'...HELP!
None of the instructions usually given for downgrading seems to mention the fact that you will lose some data in built-in applications, including at least Mail. When you installed Lion, your Mail database was converted from the format used by Snow Leopard's Mail to that used by Lion's Mail. There is no way to reverse that conversion. Therefore, you will lose your entire Mail database. If your messages are all stored on a remote server, that may not be an insurmountable problem, but otherwise you'll have to restore from the last backup you made before the upgrade, and then you'll still lose all changes to the database made since that time.
Another fact not often mentioned is that downgrading is usually the worst possible solution to a problem with Lion. But that's the answer to a question you didn't ask. -
I am running Snow Leopard 10.6.8 with bootcamp 3.3 on my Imac 2011. I need to updgrade to mountain lion. If I first upgrade to mountain lion, how do I go about upgrading from bootcamp 3.3 to latest bootcamp for mountain lion?
I have seen a lot of discussions upgrading from Boot Camp 4 to 5 but no answers upgrading from boot camp 3.3 to 5. My worry is that if I upgrade from snow leopard to mountain lion, that my bootcamp partition will no longer be able to boot up. There seem to be a lot of threads suggesting problems that are possible. Has anyone gone through this upgrade with success?Before doing any installation restart OSX from your 10.6 Snow Leopard DVD and use Disk Utility to Both Repair The Disk and Repair the Permissions of your Macintosh HD.
Next remove your Snow Leopard DVD and restart your iMac into OSX.
Update to the latest version of OS X Snow Leopard by clicking the Apple icon and choose Software Update to install Snow Leopard v10.6.8, the latest version.
Use Time Machine to make a Full Backup of your Macintosh HD.
Shut down and restart into Windows by holding the Option key at the chime and selecting Windows.
Now use Windows Backup to make a Full Image Backup of your Windows Installation to a removable drive.
Shut Down and Boot back into OSX.
Open the Mac App Store from your Dock to buy and download Mountain Lion. Then follow the onscreen instructions to install it.
Upgrading your OSX to 10.8 should not effect the Windows Partition at all since you are only upgrading the Mac side. You should not have to run the Boot Camp Assitant 5 Utility in OSX at all.
Your Boot Camp 3.3 Windows Support Drivers et. al only effect your Windows installation and should continue to run fine after upgrading.
Which version of Windows do you already have installed on the existing Boot Camp Partition?
Is it 32 bit or 64 bit? -
I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
many thanks Carl.You must boot from another drive in order to erase the system drive.
Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
Allan -
After updating to Snow Leopard (to install Lion later), Safari and other aplications became super super slow and Preview is not working properly, I can't print anything that was opened with Preview. Already installed the Combo update, nothing happened, Safari still taking hours to load any site. I honestly regret downloading Snow Leopard, the older version worked so much better... Hope Lion is smarter than Snow Leopard...
This may help:
Installing or updating Snow Leopard:
http://manuals.info.apple.com/en_US/Snow_Leopard_Installation_Instructions.pdf -
Snow leopard clean install stuck (Hard Drive upgrade)
HELP!!!...I have a mid-2009 15" MacBook Pro with a 2.53 GHz Intel Core 2 Duo processor. I currently have OS X Lion on it and running great. My problem is that I'm trying to upgrade my hard drive from the stock 250GB to a 500GB that I just purchased. I learned to do that I needed to put the new drive into the Mac and then restart my computer booting from the Snow Leopard discs that came with my computer. I did that...got into the process, and before hitting the install button opened up the disk utility to format and correctly partition the new drive. Once the drive was ready I began installation of SL. Installation progressed to about 25% then stuck. I even waited a good hour to see if it would continue...all to no avail. I went through this process three times and each time the same thing. Any ideas??? I feel like this should be a fairly simple procedure.
adamw_music wrote:
Once the drive was ready I began installation of SL. Installation progressed to about 25% then stuck.
You have a bad sector on the drive, what you need to do is this:
(clean the bottom of the 10.6 disk with a bit of rubbing alcohol and a soft cloth, polish to a shine.)
1: rebooting holding the c key off the 10.6 installer disk
2: select disk utility and partition tab
3: 1 partition, option: GUID, format OS X Extended journaled and click Apply.
4: next click Erase> Security Option> Zero All Data (wait apx 1 hour per 500GB)
If that finishes, then your drive should be fine, if not, it's defective and you need to send it back.
Writting Zero's to the disk allows the driver to map off any bad sectors
5: Reinstall 10.6 like you tried, then update to 10.6.8, then install all programs and last return files from backup, in that order for good performance.
read more about cloning etc here
https://discussions.apple.com/message/16276201#16276201 -
Why does iphoto complete lockup my computer ? Snow Leopard 10.6.8 with iPhoto 9.2.3
Why does IPhoto completely lock up my Intel Core Duo ? IPhoto seems to work OK until I try to edit a phot, then get visual artifacts on the screen and computer is completely locked up after 8 hours.
Snow Leopard 10.6.8 with IPhoto 9.2.3.Create a new account (systempreferences -> accounts) make a new Library, import some shots and see if the problem is repeated there.
Regards
TD -
Good Morning,
I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
I also rebooted holding down the shift key and still no Snow Leopard
Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
thank you.Have you restarted holding down the Opt key? That procedure should give you a gray screen with all of the partitions that exist. Then select the SL partition for boot. Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.
-
The hard drive on my Mac Book Pro failed last week. I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer. I had Mt. Lion on the old drive that I had purchased last year but no boot disc made. I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either. How do I get something to run the software that I had on the old drive?
Unfortunately I lost my life and am trying to rebuild. Isn't the technical era great.
Backup, backup, backup
As a minimum, use 3-2-1 (or even more)
3 copies of your data (original copy counts as 1)
2 different backup utilities/storage formats (protects from bugs in the software)
1 copy off-site (protects against theft, fire, and natural disaster)
More backup copies are even better.
Backup disks are cheap compared to the lost of personal data that does not exist anywhere else. -
Using iMovie 7.1.4 on an iMac w/ Snow Leopard; HD video imported with a Firewire cable transfers fine, but audio arrives with major static; problem persists w/ different cameras & Firewire cables; source DV tape has no audfio static.
I forgot to write down my computer specs:
iMac 27 Mid 2011
2.7 GHz Intel Core i5
4 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
OS X 10.9.2
Maybe you are looking for
-
Hi , I need to know which all fields are hidden in the ALV in background (as the user will enter the layout) ...i have used REUSE_ALV_LIST_LAYOUT_INFO_SET but this doesn't work in the background.. Regards Gunjan
-
Can't Get ATV to Stream from iTunes
OK, I can't get my ATV to stream from my iTunes. when I initially set up the ATV, it synced to my iTunes. I actually don't recall any option to sync or stream, but makbe I missed it. Anyway, the help says the following: "Playing your iTunes library o
-
New mac mini, now I get generic tiffs in bridge, no raw in PS cc
Hi, I just replaced my 2006 pro mac with a 2012 mini. I am getting generic tiff icons in bridge, these are created in lightroom. I received some tifs from a friend and the correct icons show. Also my icons show properly in the finder. #2 Photoshop ca
-
ITunes can't find some songs after update
So I've read a bit about this and it's happened to me now. I did the recent iTunes upgrade and now random song files can't be found. The " ! "shows up here and there. Now when I search for that particular song, I can find and play it. It's just that
-
Condition Types used in a particular country
Hi Experts, I am trying to pull a report of changes made to the condition types using VK13. Before doing this, I would like to know what are the condition types used for a particular country. How can I find out the condition types used for a particul