Snow leopard slower than ever

Hello there,
Since I've installed Snow Leopard ( one year ago...) my mac is slower than ever at the launch ( more than 40 seconds).
I did my best to clean it with Snow Leopard Cache Cleaner, OnyX. ( It fixed my problem of the multicolored circle which was boring me on iPhoto or When i was on Internet...).
I've checked and fixed the disc, it looks ok.
I've delted the soft which started at the launch
I'd like to upgrade my mac to Lion... but first I need to find  what makes it slow.
What's wrong please?
Looking forward hearing from helpers

Check this out... Closing down is very fast... here are the errors for the launch
How can i do? Thanks

Similar Messages

  • Snow Leopard slower than Leopard??

    Hi
    On 5 year old macbook with 1GB ram leopard was upgraded to snow.
    Since the upgrade the macbook is going slower... What can be the reason for this?

    Under some circumstances it's may be possible that Snow Leopard appears slower than Leopard. One technique to boost power in Snow Leopard is to transfer compressed data from the hard drive in to the RAM, Cache and CPU environment. Apples ulterior motive behind this idea was, that in the past the CPU performance grow bigger than the transfer performance from hard drives. In other words Apple thought that the additional benefit of transfer data quicker from a hard drive yield more profit than the cost the CPU have to "pay" to decompress the data. In an old system, e.g. with a single core CPU, this benefit maybe isn't present and the result maybe turns in the opposite direction and you notice a decrease of system performance.
    Bye Tom

  • MBP slower than ever...

    I just upgraded to Snow Leopard, then swapped a 250gb 7200rpm hard drive for a 500gb 5400rpm hard drive. Now my computer is slower than ever. It still works, but at a much slower pace. Often the screen will freeze for up to 10 seconds before becoming operable again. This happens when doing the simplest of tasks. I am only running about 5 programs at a time anyways. This never happened on the old system. And I don't think its a matter of the slower hard drive. I was running an old MB with a smaller HD, same RPM, same RAM, and there was no problem. What gives? What should I do?

    OK. Let's proceed on the premise it's not the drive. Although, I swapped an 80GB 5400 drive on an iMac G4 for a 160 GB@7200 and noticed quite a difference.
    How did you install, clean install with Migration Assistant, clone, Time Machine?
    There are some simple troubleshooting steps you can take.
    Create a new User go to System Preferences >> Accounts >> "+" (make it an admin acct) and test your apps in this new account, if they are faster the problem is isolated to your User and not systemwide.
    If the issue is limited to your user account try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps functions faster that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to ~(yourHome)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting. Also, delete Users/yourname/Library/Caches. (on the first launch after this some apps will be slow until cache catches up.)
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    If the issue is systemwide then, you may be able to repair this with the The 10.6.2 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
    Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
    Let us know.
    -mj

  • My macbook is running slower than ever. I have done all the updates and installed MS Office 11. Any thoughts?

    Hi, all,
    My macbook is running slower than ever. I have done all the updates, emptied my downloads, and installed MS Office 11. I am not sure if I can do anything else?!

    arupp,
         I suggest trying to replace the RAM and the memory storage. This is hard and could potentially ruin your MacBook if you do this the wrong way. Another easier way is to erase thing that you don't need.

  • Iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

    iphone 4s with ios 8.1.1, imessage gets slower than ever, sometimes even deliver after 10 min, was not like this with the previous ios, how can I improve imessage sending time?

    Hi there skmonirul,
    Welcome to Apple Support Communities.
    From what I gather, iMessages are taking longer than expected to send on your iPhone 4s. If you aren’t seeing issues with other apps, try restarting your iPhone as shown here: 
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    If the issue persists, try restoring your iPhone as shown in the article below.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    So long,
    -Jason

  • It's been a while since I upgraded my system.  Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files?  The transition should be pretty seamless, right?

    It's been a while since I upgraded my operating system.  Is there anything I should do before upgrading from 10.5.8 to Snow Leopard other than backing up my files?  The transition should be pretty seamless after installation, right?

    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • Satellite P10-802 slower than ever

    Cant run add or remove programs in control panel on Satellite P10-802 or change restore settings or delete temp internet files etc.
    I get an open file warning or option to run program or black screen system run box.
    Any ideas guys?
    Its driving me mad as computer slower than ever!!!!

    When did you reinstall the OS?
    Maybe its time to refresh the OS

  • Snow Leopard slowing system

    After installing Snow Leopard in my MacBook Pro I noticed many of my applications are slow, including Safari. Furthermore, I had the issue in iTunes with the iTunes store access. Still is not fixed. Sometimes my system just hangs and I need to Force to quit the applications for not responding, especially Safari. I noticed that Safari is hanging with no response many times after installation of Leopard. I downloaded the latest upgrades from the Apple Support help page, but the issue is still there. The Response when the system is booting is slow as well. In addition, I use Parallel software to run Windows applications and is very slow after the upgrade. (previously was stable and working properly). Is anybody has an idea how to fix this issue?

    I'm having the same problem after upgrading my iMac to Snow Leopard. At first I thought it was caused by lack of memory after noticing in the Activity Monitor that I had left only about 28MB of RAM left (Leopard 10.5 used less than 1GB most of the time). I installed two Crucial 2GB DD3 1066Mhz memory modules and the sluggishness resolved moderately. Also noticed that Snow Leopard now consumes a lot more memory after upgrading to 4Gbs. The Activity Monitor now shows that it is consuming more than 2Gbs of memory. Well at least there's a bit more than 1GB available. I ran Disk Utilities and Tech Tool Deluxe and everything seems to be fine.
    What irony, I switched from Windows to OS X because I was sick and tired of dealing with problems after each upgrade and now am having problems with my iMac after upgrading it or I should say... degrading it. I feel I should do a clean install but then it will be a nightmare having to install everything back. I guess I have to wait until someone comes up with a solution.

  • Sync iCal on laptop with Snow Leopard rather than Lion

    My netwok has both Lion and Snow Leopard computers. I used to sync iCal using MobileMe but have moved the Lion machines to iCloud. I would like to continue syncing my iCal to the Snow Leopard machine. Is this possible and if so how do I do it?

    You need to copy the Domain.sites2 file (iWeb 3) that's in your Users/Home/Library/Application Support/iWeb folder on the SL Mac to the same folder on your iMac.
    In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then you'll be able to easily find that folder and move the domain file into it.  WARNING: Be sure that the domain file has a different name than the one currently there so you don't overwrite it.
    To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • Safari on Snow Leopard slow

    I have loved safari 4 and have used it dedicatedly on leopard with ad block for the last 1 year. However, since I upgraded to snow leopard, and not having ad block, I feel safari is extremely slow. Is anyone else experiencing such a speed drop?

    I have the same issue. Pages that were nearly instant before are now exceedingly slow (www.google.com, for example, takes about 7 seconds). I have several other computers on the same network that are either running Leopard or Windows that don't have this problem, so it's not a DNS issue. I've also verified that my network connection isn't saturated.
    I've tried the following:
    * Resetting Safari
    * Emptying the cache
    * Repairing permissions
    * Deleting all subfolders of ~/Library/Caches/com.apple.Safari
    * Deleting Downloads.plist, History.plist, and LastSession.plist
    * Removing everything from both the system and account copies of the InputMethods and Internet Plugins folders
    This should essentially be a clean install of Safari, but it is still exceedingly slow. Note that it's not consistent: it will load a page quickly then, 5 seconds later, the same page will take a very long time to load.
    Sometimes, most of the items on the page will come in nearly instantaneously, but suddenly the page will stop loading for a good 5 to 10 seconds. Once that time elapses, the rest of the page suddenly downloads.
    Does anyone have any ideas?

  • Just upgraded from Tiger to Snow Leopard - slow slow slow

    macbook has slowed - molasses in winter slow.
    slow to switch aps, slow to save, aps freezing requiring force quit.
    have 1Gb ram and plenty disk space - 15Gb+

    Snow Leopard should work fine on your system. First, if you're still at 10.3, install the 10.6.8 combo update from: http://support.apple.com/kb/DL1399 . Use Disk Utility to repair permissions, then install the combo update, then repair permissions again.
    Next, you have 15GB empty hard drive space ... you want 10% to 15%+ free for systems usage. If it's below 10%, then you need to free up space, otherwise the system will crawl.
    Download Smart Utility from http://www.volitans-software.com/smart_utility.php . It will give you insight into the health of your hard drive.
    Run the Apple hardware test to see if there are any obvious hardware issues. Find the original OS X disks, and insert the one that says 'AHT Version x.x' in small print on the label. Reboot holding the alt/option key down (might work holding the D key down too), choose the Apple hardware test, and when prompted choose the extended test. While in the extended test, you might push command and L to make it loop several times. Sometimes hardware issues don't show up on one run.
    This FAQ may help too: http://www.thexlab.com/faqs/performance.html

  • CS-18 Internet Stick and Mac OSX Snow Leopard Slow

    CS-18 Internet Stick Firmware R1.10
    Macbook Pro 8,1
    Snow Leopard 10.6.7
    I'm having slow and dropped connections. I've noticed that there is a firmware update for PC but not Mac. if there is a possiblity that this will solve the problem should I try the update on a PC.
    Thx

    I've found a partial fix.
    http://support.apple.com/kb/HT3773
    Downoad speeds are still only

  • Snow Leopard slows to a crawl...

    I have a two-year old iMac that I upgraded to Snow Leopard. Since then the system runs incredibly slow, as though the processor's time is suddenly being hogged by something. After a complete shutdown things work better for awhile. Also it seems to backup and sync with MobileMe more often, which will also slow things down quite a bit.
    On my relatively new MacBook Pro the upgrade has worked great. Significantly faster all around.
    Is anyone at Apple reading these posts?

    Same here, It is so slow it is unusable.
    It is so slow my network won't even start (ir it migh be anither problem).
    It is not frozen, if you stay long enough you may notice something moving every half hour or so.
    My machine is brand new, the only 2 apps I installed are Skype and VmWare Fusion. Unplugged all external devices, power in that is it. Rebooted twice (takes almost 20minutes) still no go.
    I am new to Mac so I am definitly good at troubleshooting on Mac OSX.
    Dissapointed... I bought a Mac because they simply work...

  • Notice iPad1 Slower than ever with iOS 5?

    Boy, am I ever glad I updated my iPad to IOS 5. Not only did Apple lose my back during the update (causing me to resore the whole "system"), but now it runs even slower than the last iOS 4 update.
    Hasn't anyone else noticed this?
    When I updated to iOS 5, I said to myself, "If iOS 5 runs even slower or causes any other problems, I'm going to throw this thing out the window. Well, not going to do this, but I'm REALLY going to recommend AGAINST the iPAD to anyone interested
    Can't touch this

    LaraCroft_NYC wrote:
    Nothing is wrong. System was restored from scratch for the update. It's an iPad 1 and Apple designs new operating systems for newer, faster hardware. Older hardware ALWAYS runs slower with newer operating systems, including, and especially MACS. This is 44 years of system internals design experience with MS in Comp Sci+BS Comp Engineering talking, 25 years of Mac experience since 1986, and iOS experience since it first came out.
    What is your "experience"? Oh, yes...You mentioned it: Like "most" iOS users.
    Strangely, i have worked in Software Engineering and Operating Systems development since 1964. That gives me, oh, 48 years or so of relevant experience. I also have an MS in Computer Science.
    When I tell you that i am using my iPad 1 with iOS 5 and am NOT experiencing a slowdown do you not believe me? Is it necessary to become insulting and condescending? Is it necessary to close your mind to other data input?
    I do believe you when you say that you are having problems. Since these problems are not present for every iPad 1 user there has to be something unique about your iPad 1 or the environment/settings that it is functioning in.
    To find out what is the problem I suggest, as I said before, that you contact Apple, demonstrate your problem and get assistance.
    To reach the conclusion, on the basis of one example, that Apple has crippled the iPad 1 with iOS 5 is illogical.

  • After updating to Mavericks, my mac seems slower than ever.

    Here is a report for my mac that maybe someone can help me figure out why.  Is something not compatible?
    Hardware Information:
    iMac (21.5-inch, Mid 2011)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4 cores
    4 GB RAM
    Video Information:
    AMD Radeon HD 6750M - VRAM: 512 MB
    System Software:
    OS X 10.9.2 (13C64) - Uptime: 0 days 6:56:17
    Disk Information:
    ST3500418AS disk0 : (500.11 GB)
    EFI (disk0s1) <not mounted>: 209.7 MB
    Macintosh HD (disk0s2) / [Startup]: 499.25 GB (133.53 GB free)
    Recovery HD (disk0s3) <not mounted>: 650 MB
    HL-DT-STDVDRW  GA32N 
    USB Information:
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM2046 Hub
    Apple Inc. Bluetooth USB Host Controller
    Serato Serato Scratch LIVE(c)2004
    SCM Microsystems Inc. SCR3310 v2.0 USB Smart Card Reader
    FireWire Information:
    Thunderbolt Information:
    Apple Inc. thunderbolt_bus
    Kernel Extensions:
    com.serato.usb.kext     (2.3.0)
    Launch Daemons:
    [System]     com.adobe.fpsaud.plist 3rd-Party support link
    [System]     com.macpaw.CleanMyMac2.Agent.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.accessd.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.attachmentd.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.backupd.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.cardcald.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.portsd.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.staged.plist 3rd-Party support link
    [System]     com.marketcircle.daylite.touchd.plist 3rd-Party support link
    [System]     com.microsoft.office.licensing.helper.plist 3rd-Party support link
    Launch Agents:
    [System]     com.divx.dms.agent.plist 3rd-Party support link
    [System]     com.divx.update.agent.plist 3rd-Party support link
    User Launch Agents:
    [not loaded]     com.adobe.ARM.[...].plist 3rd-Party support link
    [not loaded]     com.citrixonline.GoToMeeting.G2MUpdate.plist 3rd-Party support link
    [not loaded]     com.divx.agent.postinstall.plist 3rd-Party support link
    [not loaded]     com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
    [not loaded]     com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
    [not loaded]     com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
    User Login Items:
    iTunesHelper
    AdobeResourceSynchronizer
    Dropbox
    Internet Plug-ins:
    FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    Default Browser: Version: 537 - SDK 10.9
    AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
    Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
    LogMeIn: Version: 1.0.961 - SDK 10.7 3rd-Party support link
    LogMeInSafari32: Version: 1.0.961 - SDK 10.7 3rd-Party support link
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 3rd-Party support link
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
    Unity Web Player: Version: UnityPlayer version 4.3.4f1 - SDK 10.6 3rd-Party support link
    Safari Extensions:
    DivX Plus Web Player HTML5 <video>: Version: 2.1.2.172
    Amazon Shopping Assistant: Version: 1.1
    Ebay Shopping Assistant: Version: 1.1
    Searchme: Version: 1.2
    Audio Plug-ins:
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins:
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    User iTunes Plug-ins:
    TuneUp Visualizer: Version: 2.4.0 - SDK 10.7 3rd-Party support link
    User Internet Plug-ins:
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 3rd-Party support link
    Google Earth Web Plug-in: Version: 7.0 3rd-Party support link
    3rd Party Preference Panes:
    Flash Player  3rd-Party support link
    Old Applications:
    /Library/Application Support/Microsoft/MERP2.0
    Microsoft Error Reporting:     Version: 2.2.9 - SDK 10.4 3rd-Party support link
    Microsoft Ship Asserts:     Version: 1.1.4 - SDK 10.4 3rd-Party support link
    Solver:     Version: 1.0 - SDK 10.5 3rd-Party support link
    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
    SLLauncher:     Version: 1.0 - SDK 10.5 3rd-Party support link
    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
    /Applications/Microsoft Office 2011/Office
    Microsoft Graph:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Database Utility:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Office Reminders:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Upload Center:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    My Day:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    SyncServicesAgent:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Open XML for Excel:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Alerts Daemon:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Database Daemon:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Chart Converter:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Clip Gallery:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Epson Printer Utility 4:     Version: 9.17 - SDK 10.5 3rd-Party support link
    /Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
    /Applications/Microsoft Office 2011
    Microsoft PowerPoint:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Excel:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Outlook:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Word:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Document Connection:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    Microsoft Language Register:     Version: 14.3.2 - SDK 10.5 3rd-Party support link
    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
    BrFirmDataProvider:     Version: 1.0.4 - SDK 10.4 3rd-Party support link
    /Applications/Brother/Utilities/Firmware Update Tool/BrIfax/resources/BrFirmDataProvider.app
    Microsoft AutoUpdate:     Version: 2.3.6 - SDK 10.4 3rd-Party support link
    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    /Applications/iWork '09
    PDF Toolkit:     Version: 1.6 - SDK 10.0 3rd-Party support link
    Time Machine:
    Skip System Files: NO
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
    Macintosh HD: Disk size: 464.96 GB Disk used: 340.60 GB
    Destinations:
    Data [Network] (Last used)
    Total size: 2 
    Total number of backups: 91
    Oldest backup: 2012-12-11 04:35:50 +0000
    Last backup: 2014-03-03 17:10:05 +0000
    Size of backup disk: Excellent
    Backup size 2  > (Disk size 464.96 GB X 3)
    Time Machine details may not be accurate.
    All volumes being backed up may not be listed.
    Top Processes by CPU:
        14%     iTunes
        4%     WindowServer
        1%     Dock
        1%     Mail
        0%     coreaudiod
    Top Processes by Memory:
    274 MB     Mail
    187 MB     iTunes
    147 MB     mds_stores
    74 MB     softwareupdated
    45 MB     Safari
    Virtual Memory Information:
    31 MB     Free RAM
    906 MB     Active RAM
    897 MB     Inactive RAM
    893 MB     Wired RAM
    7.59 GB     Page-ins
    1.55 GB     Page-outs

    Try removing CleanMyMac. The OS cleans up after itself.
    Myth of the Dirty Mac
    CleanMyMac - Uninstall
    CleanMyMac2 Un-install
    Activity Monitor - Mavericks
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy

Maybe you are looking for

  • Using a VI explicity and as a subpanel in the same code?

    I realize this message is somewhat long, so skip to the bold portion if you are faint of heart. I am attempting to use a Subpanel (for the first time) to simplify maintenance and compiling of my application.  A subpanel should allow me to only have t

  • Array to Image Inconsiten​cy

    Hello,     I am using labview 10.0 to take images over time and then recording pixel values.  The camera I am using produces a U8 array and I have 2 methods for getting the data: 1.  I use the labview array tools to select a subset of the U8 array an

  • How to install an SRX400 behind a 2wire wireless router?

    Any suggestions?  I used the Linksys guide to setup the router behind the router with no issues.  The second router acts as its own access point, accepts connections and even confirms an ip address, but will not allow thoughput or connectivity to the

  • Inbound calls to response group - failed

    Hi! I have a problem with inbound calls to Response group from external phones. But calls from Lync client to Response Group are working without problem. And calls from external phones to Lync users perfectly working too. I found this alert in event

  • Sparks when connecting MacBook Air charger to the wall

    Hi everybody. Today when I plugged in the MacBook Air power charger to the wall in my room I saw and heard sparks for the first time and the I noticed that the connecter ends of the charger have burnt a little (I see small black dents) but the charge