Snow Leopard update makes my MacBook Pro overheat

I have just updated my early 2011 MacBook Pro to Snow Leopard but now when I run the browser the fan runs like crazy, and then the computer overheats, and then the browser hangs and I have to force shutdown to stop the racing of the computer. What is wrong? This is an older computer on an older operating system, so this should not be a new problem, but I cannot find anything in the community history about it. P;ease help!

No one has any idea how I can get it to work again?

Similar Messages

Snow Leopard Updates now complete, Macbook Pro will not turn on !!!

Hi, I just updated my 17" Macbook pro with Mac OS/X update yesterday approx. 1Gb to only find the machine won't start up today. Tried with and without a power supply !!!

Can you boot up from the disc that came with your computer? You do not mention that you have tried this method.

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?

Should I upgrade to Snow Leopard/ Lion using a MacBook Pro with 2.26 GHz Inetl Core 2 Duo Processor and 2GB Memory? Can my old macbook take it?
thanks

Yes. You should be fine with Snow Leopard, but Lion requires a minimum of 2 GBs of RAM. If you upgrade to Lion I would first upgrade your RAM to at least 4 GBs if your model supports it. Also, see:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

How can I install Snow Leopard on my 15" MacBook Pro without using its DVD drive?

I'm assuming your dvd drive is broken? if you have a thumb drive large enough (8GB or better), you can use another computer to make a bootable image from the install dvd to the thumb drive. then you can install from the the thumb drive.
Ihttp://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
that's a step by step walkthrough.

While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?

Does the disc look like this DVD?

Snow Leopard 10.6 on MacBook Pro 2,1

As the title suggests, I'm trying to install 10.6 on my MacBook Pro 2,1. I am getting into iPhone dev with a few of my colleagues, and one of the requirements is 10.6. However, when I previously tried installing the OS it told me it could not be installed on my computer due to my 32-bit EFI or something like that. I have read numerous accounts of people running Snow Leopard successfully on their MacBooks, an I am wondering what I am doing wrong.
System Specs:
Model Name: MacBook Pro 17"
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5
Thanks a Lot.

You probably are not running the retail disc, or have enough space, or migrated from PowerPC the migration assistant. The retail disk looks like *
Of course you should always backup your data at least twice before installation
- * links to my pages may give me compensation

Can i install snow leopard on my new macbook pro

I'm looking at a new laptop but I understand Adobe CS4 won't work on Lion, so I'd rather install Snow Leopard on the new macbook. Is this possible?

Difficult, and even reported "success" is likely not consistent enough for your *need* for Adobe CS4.
You can try for a unit off the refurbished list (Apple.com > Store, bottom of the left hand margin is the link). Units from pre-July and last year can be found, and come with warranties just like brand new.

Can I install Snow Leopard on the latest Macbook Pros? (the ones pre-loaded with Lion)

The problem and solution is pretty simple, I just want to know if anyone has tried this before. I have a brand new Macbook Pro that I bought more or less for the sole purpose of having a more powerful machine to run AVID Media Composer on. AVID is only compatible up to OS version 10.6.7 at the moment, and the machine I got was pre-loaded with Lion, 10.7....So I look at the support documentation Apple provides, and notice that in the nifty little chart they have, the latest line of Macbook Pros out there (early 2011) originally had version 10.6.6, so I'm assuming that's the previous version I can't downgrade past.
To revert back to Snow Leopard, however, I need to install it from the DVD which has version 10.6.3 on it, and then upgrade to any version between Snow Leopard 10.6.6 and Lion 10.7. In theory this could work, the only problem being that for a brief time between installing Snow Leopard and updating to the version of it that I need, the computer will have version 10.6.3 on it.
Now I'm pretty sure if the only thing I do on the computer is immediately update to a safe-to-use version, there will be no problems. However, if the machine's hardware is so terribly non-backwards compatible with the Snow Leopard OS, I may do all this backing up and reverting and not even be able to start the computer once I get the old install on it. Before I just go ahead and try this for myself, I was wondering if anyone else has, and more importantly, have you had any success?

Hi r,
EDIT: disregard my post. Waiting for that disc is a far better option.
I hope w won't mind if I add a thought here:
rmo348 wrote:
Now I don't mind if some drivers are messed up and resolution is all funky when I install 10.6.3 on it, I just need to know if it'll be functional to the point where I can run the 10.6.6 update dmg. Once I update to 10.6.6 everything should work fine.
Or could I install 10.6.3, have the 10.6.6 update burned to a disc, and boot straight from that? This is my first Mac so I'm not sure what little tricks work or not.
Your first idea may work; the only way to know for sure is to try it. If you do, make sure you download and run the Combo update for 10.6.7 or 10.6.8. There can be different versions of a point update, those which are available for download, and those which ship on Macs, so you want to install one beyond that which shipped with some of the new MBPs.
If the MBP won't boot to 10.6.3, something else to try is installing it to an external HD, then installing the 10.6.7 update on it, clone it to the MPB's internal HD, and run the 10.6.7 or 10.6.8 Combo update on it.

TS1963 DMS Launch error after migration from snow leopard iMac to new Macbook Pro?

I just purchased a Macbook Pro. I used Migration assistant to transfer my files from my '06 iMac, which was running snow leopard to the Macbook and at start up now get a DMS Launch error every time... any suggestions??
The error message says check with the developer to make sure DMS Launch works on this version of OS X. You may need to reinstall the application.
I have installed all updates as it suggests, to no avail. I keep getting the error message and report pop up box each time at start up and the only way to be rid of it, is to click ok to send the report - there is no option to stop the report from coming up.
Does anyone have any suggestions on what I can do to stop the error message appearing and resolve the issue?
Thanks
Chelle

Click Command+shift+G
Type in the following, one by one- Then delete the **** out of them.
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/LaunchAgents/com.divx.update.agent.plist
/Library/LaunchAgents/com.divx.dms.agent.plist
/Library/Application\ Support/DivX/
HOME/Library/Preferences/com.divx.*
Also search anything "DIVX" while in library. Delete the **** out of that too.

Running Lion and Snow Leopard on the same MacBook Pro

So here's the thing .....apparently Lion won't run Photoshop and Illustrator CS2 (which I'm quite happy with and not about to shell out silly amounts of money to Adobe for even CS3) and apparently there may be (and I stress may be) problems with Word 2008 (likewise money to Microsoft for Word 2011).
I think, and probably won't know till I've installed it, that I'd like to try Lion on my Macbook Pro but keep Snow Leopard as a separate OS to run Photoshop, Illustrator and if necessary Word until I can afford to pay Adobe (& possibly Microsoft though I can't really see what improvements they can make to Word 2008) the large amounts of money they seem to think they deserve for an upgrade.
Does anybody out there know if it is possible to run both Lion and Snow Leopard on the same machine and if it is how do I do it?
Thanks for taking the time to read this.

Likely a corrupted cache file
Read the
Deeper cache cleaning/resetting
https://discussions.apple.com/docs/DOC-3046

Help with Snow Leopard "Re" Install on Macbook Pro

I have a 2010 Macbook Pro. Upgraded to Lion. No problem. Last week, things got a little glitchy. A long download for iPhoto (among other things) would not work. I thought, why not upgrade to Mountain Lion. I purchase. Download... yet its not working, download corrupted. Tried again and again. Nothing. Tried to search some possible solutions, made it worse. System acted weird. Thought I should restart. Turned off. Would not start. Attempted safe mode start, bar goth 30% across screen, off. Put old Snow Leopard install CD in, booted from that. Started. Can't revert, but previously backed up important files, so I erase Mac HD. Pain in butt, but at least I'll start fresh, so I think. Every time I go to install from CD, it gets to the same 33 minutes to go and then and error happens saying it can't install the necessary support files. ??? What is going on? I'm prepared to scrap and replace the physical hard drive (not the first time, had a similar problem on my still going strong Mac Mini from years earlier. I just want to know if I'm doing something wrong, am I erasing wrong?
Suggestions appreciated greatly. I just want my laptop to work again!

Well, you have a mess.
Connect the Apple 10.6.3 DVD.
Reboot MBP with option key held down.
Choose SnowLeopard DVD
When DVD boots into install, choose Disk Utility from main menu
Choose the MBP drive in Disk Utility
Partition, 1 partition, option GUID, HFS Plus, Journaled
In Disk Utility FIrst Aid, Verify the Drive
Exit Disk Utility, but not installer
Start the Install from the Snow Leopard DVD
On reboot, follow additional setup procedures.
Choose Software Update, to get 10.6.8 updater and other files.
Go get coffee.
When updates are done, backup your MBP with TimeMachine.
Done.

Snow Leopard on an older MacBook Pro

Hi everyone!
My companies' IT dept is having a garage sale. One of the items is a older MacBook Pro (prob around 2006) with a 2.3 g processer and 2g of memory. No OS, but in good working condition
My questions:
I have a Snow Leopard disc that I installed on my iMac years ago, can i use that again for this laptop? (i thought i heard more than one install is allowed from discs...?)
Will this model laptop run Snow Leopard OK?? what about Lion , Mt Lion?
Thx for any help!!

1. Probably not, as nstall disks are machine specific.
2.
Start by checking if you can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
The OS 10.6 Snow Leopard install DVD is available for $19.99 from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
and in the UK:
http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
but nobody knows for how long it will be available.
When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
You should now see the App Store icon, and you now need to set up your account:
http://support.apple.com/kb/HT4479
To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
http://support.apple.com/kb/HT4759
You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

Snow Leopard on new 2011 MacBook Pro?

I need to buy a new MacBook pro, as my early 2008 model just died on a road gig (4 months out of warranty) but most of my drafting software has been found to be incompatible with lion, is it possible/simple to put snow leopard on a brand new MBP 15"?

Yes. You can create a second partition on which to install a copy of Snow Leopard.
To resize the drive do the following:
1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
2. Click on the Partition tab in the DU main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
3. In the lower right corner of the sizing rectangle for each partition is a resizing gadget. Select it with the mouse and move the bottom of the rectangle upwards until you have reduced the existing partition enough to create the desired new volume's size. The space below the resized partition will appear gray. Click on the Apply button and wait until the process has completed. (Note: You can only make a partition smaller in order to create new free space.)
4. Click on the [+] button below the sizing window to add a new partition in the gray space you freed up. Give the new volume a name, if you wish, then click on the Apply button. Wait until the process has completed.
You should now have a new volume on the drive.
It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss. Your drive must have sufficient contiguous free space for this process to work.

Boot MacBook hard drive(Snow Leopard) via USB on MacBook Pro(Leopard)

Recently my old MacBook's (2.0 Core Duo) logic board failed. It was running Snow Leopard and is either on 10.6.3 or 10.6.4 (not sure when I last updated). I would like to remove the 500GB hard drive and use a SATA to USB connector to connect the hard drive to my work MacBook Pro (2.2 Core 2 Duo) running 10.5.8 and use the work laptop to boot the failed MacBook's drive. Before I try this setup, I was hoping to find out if this will work at all or if it could potentially mess up my work computer.
Any help is greatly appreciated. Thanks!

You want to boot your MBP with the MB's HD? Won't hurt to try, but it might not work. Trying won't muck up the MBP. Alternatively, if you're trying to recover stuff from it, you don't have to boot with it, just mount it and transfer stuff, assuming the username & password combo matches. Otherwise, use the Migration Assistant to do the transfer.

My macbook won't read the snow leopard disk but my macbook pro does...why?

For better or worse I ran a clean install of the original MacBook OS for an early 2008. It had been running Lion over the years it had never been wiped and reinstalled. In any case, I successfully reinstalled 10.5.2 with the start up disks that came with the machine when we purchased it. (That showed me the drive was operational.) I then attempted to install Snow Leopard with the install disk we've kept and the drive rejected it; however the MacBook Pro's drive did not reject it. (That showed me the disk is operational as well.)
Is the problem as simple as having to update Leopard to the max before the drive will accept the Snow Leopard disk?

Zap the PRAM and Reset the SMC; then, try again. BTW, does the optical drive show up in Apple menu item->About this Mac->More info?

Snow Leopard update makes my MacBook Pro overheat

Similar Messages

Maybe you are looking for