Snow Leopard with Mac mini?

I'm about to purchase my 2nd Mac mini, Today is June 1st, do you think it's a good day to buy or should I wait for a few days until Snow Leopard comes out?

buy now...apple will upgrade you to snow leopard for free in a couple days when it comes out.
obvious sarcasm here...there is no release date for snow leopard, so if you need a computer today then buy one, if you can wait...then wait.

Similar Messages

  • Need help installing snow leopard on mac mini 10.5.8 intel based

    I need help need help installing snow leopard on mac mini 10.5.8 intel based so if u kno how pls message me thanks
    <Email Edited by Host>

    You need to purchase the upgrade disk (it is a DVD). Then just put it in and run the installer. When it was first released it was $29 USD, do not know if the price has changed or not.
    The usual precautions about backing up your data apply. In fact I would recommend either making a Disk Image of your current boot drive or using something like Carbon Copy Cloner to copy it to an external drive. I upgraded 5 machines from Leopard to Snow Leopard without any issues, but better to be safe than sorry.

  • Can't install Snow Leopard on Mac Mini with 10.5.8.

    I'm trying to install an upgrade copy of Snow Leopard from Apple on my Mac Mini running 10.5.8. I bought this system used and the volume says ";" and the error log code is 21. Seems it can't find valid softward ID to continue or the path is different. Not sure where to go with this.

    If your mini meets the specifications for Snow Leopard (an intel processor and 1GB or more of memory)
    then go here to buy snow leopard
    http://store.apple.com/us/product/MC573Z/A
    It's possible that the upgrade disk you have is specific to particular Mac models.

  • Install snow leopard on mac mini with broken DVD Drive

    I want to upgrade the OS on my mac mini but the hard drive keeps kicking out the disk - I read that I "might" be able to fix this by using a DVD cleaner but I am not overly optimistic about this fix. I have an external USB drive and a Windows PC to work with so I am wondering if I can use the DVD drive of the PC to copy the install disks to the external drive and then perform the instal from the external drive. I have been reading posts and can find advice on how to copy the Leopard install discs using another Mac or by using the remote disk feature - but since I don't have another Mac, these are not currently options.
    Thanks

    1. Clean your drive and reset the > PRAM, then try upgrading with the Mac Mini's drive.
    2. Try out that external USB DVD drive, some will work if they are not OS X compatible.
    3. Your PC might work, see > DVD or CD sharing: Using Remote Disc

  • Installing Snow Leopard on Mac Mini Server

    I recently purchased a 1Tb 4Gb Mac Mini Server, running Snow Leopard Server. I want to use it as a central repository for my other macs: storing music, movies, backup, screen sharing (it's hooked up to my 32-inch TV) but I also want to be able to run Logic Pro, Ableton Live, etc. I also have a Macbook Pro running Snow Leopard Client, which contains all of my programs, plugins, data, etc. I realize that Snow Leopard Server does not have migration assistant, so I have tried to install a retail copy of Snow Leopard onto the secondary drive, but when it gets to the restart stage it crashes every time. I think this is a firmware issue, because the Mac Mini has a different hardware configuration to other macs. I do not have access to the mid-2010 Snow Leopard Client for Mac Mini which would allow me to install Client and use migration assistant from there. What I would like to know is:
    1/ Can I manually migrate my plugins/settings/programs to the server? If so, how? What is most crucial (and what I don't understand) is copying my audio units and audio programs (e.g. Logic Pro, Pro Tools). Because of the firmware issue, it seems more difficult than cloning my MacBook Pro to a time machine HDD and running from there... I would really like to purely clone my MacBook Pro, because I am very happy with the way it is set up.
    2/ Should I just wait for OSX Lion (July/August) which seems to be a combined server/client os, install that on both machines and run migration assistant from there?
    3/ Is there another method I can use? Something I am overlooking?
    Thanks in Advance.

    Thanks for your reply. I talked to the Apple Support again and they told me the server edition could only be used on that OS and if I wanted to use it as something else I could chose not to use the server applications, or buy a regular Mac mini. And that was all they said. Interesting since it was one of their sales persons who told me I could install Snow Leopard.
    Anyway, I got hold of a client disc and it all worked like a charm.

  • Can I install Snow Leopard on Mac Mini Server hardware?

    What I would like to do is buy the Mac Mini Server but I don't need the server OS. I want the desktop OS on the Mac Mini Server. Will installing Snow Leopard on the server hardware be just like installing it on a regular Mac Mini?
    Or should I just wait and see how Lion shakes out?

    Thanks Indy, I already had proceeded the installation according your tip. Just an objection related to the updates: I was able to install the OS updates only while in target mode, as when I made 2 attempts to update the version 10.6.6 to the current one (10.6.7 - the combo one and the MBP version too) it was not permitted. I had to plug the FW cable into the MBP again and update the Mini's OS (using the special MBP version of 10.6.7) in target disc mode. I want to use the Mini as a media server and intend to install Windows 7 on the other HD which now hosts the server OS. However, according to one poster (Sven G) there are some problems (I don't know exactly what they are) related to Boot Camp software. Have you any information about these problems?
    I have maintained both OS (standard and server) living side by side on the Mini, is there any problem with that?
    Again many thanks, you were succinct, right to the point, and your tip just proved itself correct. 
    Cheers
    Marola

  • Convert Snow Leopard server mac-mini to basic Snow Leopard Mac-Mini?

    I have recently purchased a Mac Mini with Snow Leopard Server installed.  I have decided not to use it as a server and just maximise its capacity by using it just with Snow Leopard.  How do I reformat to install basic Snow Leopard software?  Thanks

    Without an optical drive of its own, a Mini Server model would require the use of an external optical drive capable of supporting OS X installation and booting. This could include another Mac capable of supporting Target Disk Mode and the use of the second computer's optical drive. Or a supported external optical drive.
    Another question may arise in the fact you would not be able to use an older OS X install disc older than the version shipped with the computer; the date of the Snow Leopard version's retail install disc would have to be newer than the SN OS X 10.6.x install DVD the machine shipped with in order to use it.
    There may be a way to do a Custom installation from the Snow Leopard Server version DVD you have. This would likely be the best bet if possible. Given the higher level tools and processes available to the Server version of OS X Snow Leopard, being able to use that is a better preference overall than Client version.
    You may be able to upgrade an internal hard disk drive to a larger capacity unit, or get and use a supported externally enclosed hard disk drive capable of supporting OS X booting and clones; these options could expand the basic use of the computer no matter what version of OS X you have running within it. Later on should you decide to experiment, a second drive for dual booting 10.6. & 10.7 could be a way to go forward.
    The accessory use of a more dedicated external optical drive for the Mini Server edition is recommended; as well as the use of an external enclosure for an additional hard disk drive for backup purposes.
    Depending on the version of standard retail Snow Leopard install DVD you may have, the ability to perform an Archive and Install should be available to you. Or perhaps a custom installation to nullify some of the more advanced parts of the Server version may be a possibility to investigate. I'd read up on what advantages a Server version of OS X can provide you, before leaving it.
    When Lion 10.7 arrives, if your computer is supported, it should be relatively easy to upgrade & install the standard version (vs Server) via an upgrade where you keep user account settings etc from the previous OS.
    Anyway hopefully this helps...
    Good luck & happy computing!

  • Snow Leopard on Mac Mini Server

    Hi All - I have a new 2010 Mac Mini Server and would like to install Snow Leopard (non server version) on it. When I boot from the retail SL DVD on an external USB drive, it boots ok, then I get the error screen and have to hold down the power button to restart.
    does anyone have any idea how I can achieve this?
    Nev.

    Welcome to the Apple Discussions!
    Do not boot from the Install Disk. The Server has two drives. The second one is blank. Just tell SL on the ext HDD to install SL on the blank drive. Then download the 10.6.4 Update for the Mid '10 Mac mini and install it over the new installation of SL. That should bring that out-of-date version of SL up to date with all the specialized software for SL to interface with the new hardware of the new Mac minis. When the installation is complete set the 2nd drive as the startup drive in Sys Prefs/Startup Disk.
    Dah•veed

  • Can't connect iMac/Leopard with Mac Mini/Tiger and vice versa

    This one has got me tearing my hair out.
    I have an Intel iMac running Leopard and a Mac Mini running Tiger on the same Ethernet network. Both run (adjacent) fixed IP addresses with common subnet mask and gateway. Both access the Internet fine through a single router. But can I share files between the two?
    Neither has firewall turned on while file sharing is enabled. I can see each Mac from the other but when I try connecting first I get 'The server may not exist or is not operational at this time. Check the server name or IP address and your network connection and try again.' Then on clicking OK I get 'This file server is running on your machine. Please access the volumes and files locally.'
    If I try connecting from Finder using Go - Connect To Server I get this error message 'The Finder cannot complete the operation because some data in "afp://MacMininame" could not be read or written.'
    Although I'm running Leopard on the iMac now, this also used to happen when I ran Tiger too.
    Many thanks - GeoffT.

    Fixed it!
    I have Parallels installed on the iMac and it creates two virtual network adapters (Guest-Host and NAT) in System Preferences/Network. For some reason I'd foolishly contrived to manually configure the Nat adapter to the same IP address as the Mac Mini, hence the point-back to the iMac every time.
    Guess we're all allowed the occasional foul up.....
    GeoffT.

  • I have a 2008 iMac 21.5" 10.6.8 Snow Leopard with 4.1.3 VMWare and windows 7.Mountain Lion initially refused to down load as I had back up on the HD. this was removed and installation was accepted but froze in the initial stages with 33 mins to go.

    I have a 2008 iMac 21.5" using 10.6.8 Snow Leopard with VM Ware 4.1.3 supporting Windows 7. Initially ML OSX refused to install due to Back up on HD which I removed to trash.It then proceeded but froze up in the initial stages with 33 mins remaining. I was lucky enough to quit and restart using 10.6.8. With all the problems on this chat line, it appears it may be best to leave Mountain Lion well alone, and cut losses rather than tempt fate.Has anybody anything positive to say or help with?

    Welcome to Apple Communities
    1. Open Disk Utility and repair permissions
    2. Open Finder, go to your user's folder > Library > Caches and delete everything
    3. Verify disk
    4. See if your apps are compatible with OS X 10.8 > http://www.roaringapps.com
    You can also do a backup and create a DVD or USB drive to install OS X > http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/ When you start in 10.8 installer, open Disk Utility, select your volume and erase the drive, and install

  • Is Motion compatible with Mac mini?

    Hello,
    We have Motion 3, and the management is considering to buy a new Mac mini.
    Here are some specs for the new Mac mini they are considering -
    2.4GHz Intel Intel Core 2 Duo / 4GB DDR3 SDRAM / 320GB hard drive / SuperDrive
    NVIDIA GeForce 320M / Gigabit Ethernet, Bluetooth 2.1 EDR, IEEE 802.11n (draft)
    Mac OS X v10.6 Snow Leopard
    With our current setup (see info below) I can't use the Light feature in Motion 3 and was told by Mark Spencer4 that,
    "Motion isn't supported on a Mac Mini. In particular, lights won't work."
    Will the latest Mac mini support Motion 3? How about Motion 4?
    Overall, I'm dissatisfied with the performance of Motion on this Mac mini. It's very slow and I've heard that there are still memory shortages even in the latest Mac mini.
    Any advice or suggestions?
    Thank you
    Specs for our current Mac mini -
    Model Name: Mac mini
    Model Identifier: Macmini1,1
    Processor Name: Intel Core Duo
    Processor Speed: 1.66 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 2 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MM11.0055.B08
    SMC Version (system): 1.3f4

    From the Motion page:
    ATI or NVIDIA graphics processor (*integrated Intel graphics processors not supported*)
    From the Mac Mini specs:
    It gives you next-generation NVIDIA GeForce 320M graphics — the fastest integrated graphics processor on the market today — and speedy DDR3 memory.
    So, it's not using "Integrated Intel graphics processors.
    My only question would be Motion needs 128MB of VRAM. Would 256MB of DDR3 SDRAM shared with main memory that the mini has, suffice.
    As for the lights, I would think since the 320M uses OpenGL 3.2 that Lighting would not be a problem.
    Just the memory issue would slow it down.

  • Can't install snow leo on mac mini

    I want to upgrade my mac mini from leopard to snow leopard with the install disc that came with my imac i5.
    mac mini specs : 1,83 GHz intel core 2 duo
    2 GB 667 MHz ddr2 sd ram
    GMA 950 gfx card
    500 GB HDD with 245 GB free
    According to apples system specs i should be able to install snow leopard on this machine but i get a message when attempting to install that snow leo can't be installed on this system?
    I tried this via disc in finder and via push c at startup,both give same warning.
    What other options are there?How to install snow leo then?

    Hi Red_viking;
    Yes that is true. The DVD that comes with a Mac is set up specifically for that Mac and can not be used on another.
    Allan

  • How can I do a clean install of Snow Leopard with out losing iLife applications?

    I bought my Macbook pro in 2009 and am currently running the Leopard software. I want to do a clean install of Snow Leopard, but I do not want to lose my iLife applications.  I lost the DVD's that came with the computer. Is there any way I can do a clean install of Snow Leopard with out losing my iLife applications?
    Will a regular installation of Snow Leopard allow the App store to recognize that my computer has iLife and mark it as a purchased item in my account. If it can, then would I be able to do a clean install and re-download the apps for free.
    Any help would be appreciated!

    1. Install Snow Leopard normally; this will keep the applications intact. An actual clean installation involves either erasing the partition or creating a blank one, and neither of those will carry the applications over.
    2. The previous iLife installation won't carry over to the Mac App Store, and the Mac App Store versions are incompatible with Snow Leopard.
    (97485)

  • Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its  related to overheating ?

    Just done a replacement of the pata DVD drive (its new and is working ok),  and a fresh clean  install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
    I believe its  related to overheating ?
    iStat Pro shows GPU diode temp at 66 C, CPU at 48 C,  Fan rpms is around 1000
    Any ideas somebody ?
    The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

    1.5-3 minute boot up as opposed to 15-20 seconds
    And
    why it takes a long time to load a lot of things.
    I have restored this
    from a time machine partition.
    TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
    What you need to do to regain your speed is to understand how your machine works
    Why is my computer slow?
    Fix any and all issues in software following this list of fixes
    ..Step by Step to fix your Mac
    Then follow this defrag method I've outlined
    How to safely defrag a Mac's hard drive
    Most commonly used backup methods
    There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
    Hope this assists.

  • How can I install Mac OS X Snow Leopard on Mac OS X Tiger?

    Hello. Can someone tell me how I can install Mac OS X Snow Leopard on Mac OS X Tiger? I have the disk, but when I open the installer, I get a message saying that Snow Leopard could not be installed on my computer and it could only be installed on a Intel-Based Mac. This is a PowerPC Mac, so that makes sense.
    So, I'm trying to ask how to make my Mac an Intel-Based Mac so I could install Snow Leopard. Or if I can't do that, I need to know how to install Snow Leopard some other way. Please help.

    Just an FYI, the Mac App Store was introduced with Mac OS X 10.6.6.    However the rest of what you say is accurate.
    10.6.8 is required if you want to upgrade certain Macs beyond 10.7.5 without having to reformat the drive you are installing the operating system on and without having to install some version of 10.7 first.
    One can actually install 10.7 or later if you maintain an original copy of the full installer of the operating system in question for your personal use without having to have the prerequisite operating system installed, if the hardware supported it.  But that's a discussion for another forum.
    For HFTaylor,
    Consider buying a used or refurbished Mac with an Intel CPU depending on your needs.  Read this tip about the migration of data from PowerPC to Intel before proceeding:
    https://discussions.apple.com/docs/DOC-2295
    and see this tip about used and refurbished Macs*:
    http://www.macmaps.com/usedrefurbished.html
    * Links to my pages may give me compensation.

Maybe you are looking for

  • IDOCs are corrupted by Idoc adapter (probably)

    Hi, in our scenario we send IDOCs to a receiver, that is a SAP R3 System. In general, It works fine, but sometimes the IDOC structure at the receiver's side is corrupt, e.g. all segments are flat insteadof organized in a hierarchy. We already have up

  • WebLogic 9.1 Express Deployement Issue

    We are using WebLogic 9.1 Express in a single domain, multiple managed server, non-clustered environment. We have been seeing an issue where during the deployment phase of our maintenance window, if users attempt to access the application, while the

  • Setting bpel variable using external java code

    Hi all I would like to ask if there is a way to set bpel process variable during process execution from external java code using java api without using java embedding code?!! Thnx in advance

  • Slow Macbook Pro After Mavericks Upgrade

    I have a mid 2010 mbp 15" 2.66 GHz Core i7 Before I upgrade to Mavericks I had Mountain Lion, and the computer was rebooting randomly, so Apple gave me 3 years extended warranty and they replace the mother board. Then, I upgrade to Mavericks and afte

  • Issue on IPhone 4. All App Updates or New Install that I have tried to update go under the waiting mode and wont do anything

    I'm having an issue with downloading and updating apps on my iphone 4. It did not start immediately after updating to iOS 5.1. Just started a couple of days back and is driving me nuts. Any apps that I have tried to update or install new apps will go