Snow like display on screen

Hi everyone,
I've been experiencing an issue on and off for sometime now which I think is odd. I have an external lcd monitor connected to my MBP (2009) via an apple mini displayport and an HDMI cable. Occasionally, after the MBP turns the external monitor off (sleep) and I come back to it, the screen shows nothing but a snowy type image. It looks a lot like what you would see if you were to tune into a TV station that your TV can't receive. It's not consistent though..and I can't trace down what might trigger it. It's not the monitor as far as I can tell because I have had 2 different monitors do the same thing.
I can resolve the issue by unplugging the displayport cable and plugging it back into the MBP.
Any ideas on what might cause this? or has anybody else experienced this issue?

Srikanth:
It appears that you have tried RESTORING your iPod Touch. That alone should have put the iPod Touch to original factory settings. I recommend that you take your iPod Touch to your nearest Apple Store for evaluation and possible service. This is because I think your video card is failing.
Axel F.

Similar Messages

Any way to get Illustrator CS5 to display full screen mode like Photoshop?

Is there any way to get Illustrator's screen modes to behave like Photoshop's screen modes?
One of the things I like most about Photoshop is the way it toggles from standard screen mode to "full screen with menu bar" to just "full screen".
For example, in Photoshop's standard mode, the window is no bigger than the size of the canvas. Why can't Illustrator do that?
And, is there anyway to get Illustrator CS5 to display the full screen mode where the background outside the artboard or canvas is black instead of white. Working in Illustrator for long hours, it would much easier on my eyes if the surrounding background could be black like in Photoshop.
Thanks very much in advance for any help,
- Nick

At the bottom of the Tool bar is a toggle button (F) which will change the Screen Mode.

When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

When turning on my mac book pro it displays a screen with apple logo and begins loading a loading bar, after this continues to show loading circle however has been like this all day still no different. Tried turning it on and off however still same!

... then run Disk Utility, Repair Disk.
Also:
Resolve startup issues and perform disk maintenance with Disk ...
Mac troubleshooting FAQ: start-up woes
How To Fix Common Mac Startup Problems
Mac Stalls on Gray Screen at Startup - Troubleshooting Mac Startup ...

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.

Probably a setting. Look at the manual.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

When I updated my iPhone 4s the picture of the person calling me is no longer displayed full screen. I do not like the small thumbnail picture. What can I do about this?

When I updated my iphone 4s the picture of the person calling me is no longer displayed full screen and the thumbnail picture is too small. Is there anything I can do to change this?

Yes, hopefully.. Go to www.apple.com/ feedback and let them know how upset you are!! I did along with many others. It's the only way to let Apple know they made a HUGE mistake here..

How to display a screen in selection-screen?

hi friends,
I have a requirement. I have one PNP database SELECTION-SCREEN in my report program. And i have created one more screen using screen painter.
Now i hae to display that screen which i created using screen painter under PNP SELECTION-SCREEN.
For ex:
PNP SELECTION-SCREE.
Pernr Number    _______________
Employe Name _______________
Company Code _______________
Payroll Area     ________________
Now after this i have to display my screen which i designed using screen painter.
As shown below.
O In rupees
O In Percentage
   Variance______
Here i specified some fields only. some more fields also there.
For this i did as....
I created a BUTTON in SELECTION-SCREEN. And when the user clicked on this then screen will appear as window.
It's working fine.
It's look like this.
   |More Selections...|                            -
> Button
But,my client required that screen also wants to display directly under PNP SELECTION-SCREEN but not as window and clicking button.
If Any Help.. Plz....
Thanks & Regards,
Shree.

hi prakash,
thanks for ur solution.
but it's not working properly. while changing 1000 screen and activating, it's showing syntax error like this.
while changing:
==> Element PNPS$MCD touches or overlaps other element
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element
While Activating:
Syntax Error in Screen.
Program <myprogram name>
Screen   1000
Position Flow Logic       Line 95
The include block has been used twice.
But, Here i clicked the button "Activate".
Then It's showing messages as this.
==> Selection screen: Report generation makes screen changes ineffective
==> Element PNPS$MCD touches or overlaps other element.
I checked out that Line 95.
There i am specifying my suscreen as this.
CALL SUBSCREEN subscreen1 INCLUDING sy-repid 106.
at end of PBO.
And in PAI.
CALL SUBSCREEN subscreen1.
Finally when i tried to execute it's giving DUMP.
Any solutions..
Thanks & Regards,
Shree.

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

How do I get my contact's photos to display full screen for incoming calls?

I noticed today that when I get an incoming call it no longer displays "full screen". I keep missing calls because it now only displays as a banner at the top of the screen that someone is calling and their photo (if I've assigned one to them) is a tiny thumbnail.
Did I only just notice now that this is another 'great upgrade' with the new IOS, or is this some weird glitch with my phone? I've been wondering how I've been missing calls in the past week, but just happened to catch it today after I had been using the new map app and wasn't sure if it was just a coincidence or if it's somehow connected..?
Is there any way to change this or am I stuck with it this way??

I've never added my contact on my computer, I've always done it through my phone (I didn't know you could do it through the computer). The problem is not the photo, it's that the call doesn't come in and take up the full screen. Now when a call comes in, it displays as a banner at the top of the phone where the time and date normally would be, so I don't notice anyone's phoning.
As far as I can recall, it's only started happening since yesterday after I used the new map app. I've checked my notifications settings and the phone settings and so far as I can see, everything is set the same way it always was. I checked my hubby's phone to see if it's maybe something new since this last update to IOS6, but the call displays full screen (regardless whether the contact has a photo associated to it or not) and not a banner at the top of the screen like mine.
I still don't know how to change this back. Any other suggestions?

Getting the photos I print to match what they look like on my screen.

I'm having a hard time getting the photos I print to match what they look like on my screen. I even bought a monitor calibrator and tried changing my color settings in Photoshop and it hasn't seemed to help. The pictures even look different when I pull them up in The ROES program I use to order prints from. The pictures come out really dull compared to what they look like in Photoshop. Does anyone have any ideas on what I can do to fix this?

There are a couple of things to note here right away.
To get a good screen to print match the first consideration is the monitor brightness and white point temperature. The goal is a visual match to paper white.
The calibrator will help you set this up. Spend some time to find the right settings, because it will depend on the ambient light and your whole working environment. That includes the Photoshop UI - if you use the now default dark UI, images will appear brighter than in the old light UI.
The second thing to note is that you don't change any Photoshop color settings. The calibration and profiling is all handled automatically, once you found the right settings for white point. Just let the calibration software run through and do its thing, done. The display profile is set up as system default and Photoshop finds it there.
Once you have a correct display of the file, you then need a correctly color managed print pipeline. If both are accurate, they will match.

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

I connect my Macbook 13" to my thunderbolt to display on my HD television but it keeps asking for a KeyChain password for "user-hp". My key keychain password is nothing but it does not want to accept and not display my screen to the Television. Suggestion

Apple support article:
Mail Keeps Asking for Password
Maybe this will help. If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.
https://discussions.apple.com/message/20549403#20549403

Import dialog box displaying off screen

When I'm in the office, I work in a dual-monitor environment.
However, when working at home, I have only my laptop monitor.
If I need to import something - html file, template file,
etc. - the dialog box is displaying off screen.
I've shut down and restarted, but still the same result. When
I try to resize the RH window, it resizes off screen.
My display properties indicate only one monitor.
How to fix?
Thanks!
Cindy

Hi Cindy
Sounds like you need some multiple monitor managing software.
Try these:
MultiMon (Free)
click here
UltraMon (Paid)
click here
Other than that, you can try flying blind and navigating
using the keyboard or maybe bump your resolution to the highest
possible setting and perhaps that will bring the dialog either
partially or totally into view.
Cheers... Rick

How do I get online help to display full screen when opened?

I'm working in RoboHelp HTML 8 developing
WebHelp. My client wants the help to display full screen (100%) when it's
opened.
How do I accomplish this?
Thanks
Mendonite

If your just opening the html file from a link within your site, then you could code the link to open in a new window at full size. This is not done through RH, but instead on the site where its linking to your webhelp index.html page. Its relatively simple, and you can customise things like viewable buttons, scroll bars etc etc.
have a look here:
http://www.htmlcodetutorial.com/linking/linking_famsupp_87.html

Depndng on chkbox, should display selection screen block on selectionscreen

Hi,
Depending upon the chkbox it should display selection screen block on selection screen.
If not checked it should display B3 and If checked it should display Block B2 .
SELECTION-SCREEN BEGIN OF BLOCK B1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS P_DAT AS CHECKBOX USER-COMMAND FLAG.
SELECTION-SCREEN COMMENT 3(79) text-112.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-109.
PARAMETER:      p_year1   LIKE ce1rh03-gjahr,
                p_perid1 LIKE ce1rh03-perde.
SELECTION-SCREEN END OF BLOCK B2.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-109.
PARAMETER:      p_year    LIKE ce1rh03-gjahr MODIF ID MO1,
                         p_period LIKE ce1rh03-perde MODIF ID MO1.
SELECTION-SCREEN END OF BLOCK B3.
If P_Dat is checked     .... It should display the Block B2 and
If p_Dat is not checked .... it should display the Block B3
Any suggestions will be appreciated!
Regards,
Kittu

Hello Kittu,
You can try this code:
SELECTION-SCREEN BEGIN OF BLOCK b1.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS p_dat AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN COMMENT 3(79) text-112.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-109.
PARAMETER:      p_year1   TYPE gjahr MODIF ID mo1,
                p_perid1 TYPE perio MODIF ID mo1.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-110.
PARAMETER:      p_year    TYPE gjahr MODIF ID mo2,
                p_period TYPE perio MODIF ID mo2.
SELECTION-SCREEN END OF BLOCK b3.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF p_dat = 'X' AND screen-group1 = 'MO2'.
      screen-active = '0'.
    ELSEIF p_dat <> 'X' AND screen-group1 = 'MO1'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
Hope this helps.
BR,
Suhas

Qosmio G - Graphic card displays wrong screen

My laptop froze to a blank screen. When rebooted it first displayed a black background with a light concentration of blue and white shaded blocks in strips vetically down the screen - like a tetris game.
As it went through the loading of Windows in the background, the display turned to a green-yellow lines on black bakground verticlly down the screen - like the Matrix screen from the movie of the same name. The next display was black and white barcode blocks also vertically. It started a repair-recovery action which eventually failed and would not go any further. I went on in safe mode with the same displays happening. I disabled the NVidia GeForce GO 7600 graphics card to set it to the standard VGA.
I can now log all the way onto and use it in the normall manner but visually it is the same as described above through the boot porcess, but adding blue rain like verticle lines down the screen - like Vista is behind the window of wet coloured glass. White pages such as a Notepad windoe has pink verticl lines down it but the text is readable but everso light in shading.
Everything seems to work fine, browser, web surfing, email, but the display is shot. I connected external monitor but got same. I tried to check BIOS but is all displayed in coloured tetris squares making it hard to see what to do. I upgraded the BIOS from v3.40 to v3.90 successfully but no change to display. I ran diagnostics and Graphics card failed.
I guess the graphics card is a goner and I need a new motherboard aye !

I know this problem.
If you power on by the button TV-Tuner, you have a problem?
As i solved this problem:
Power On notebook (press standart button ON/OFF , not from TV tuner button)
When you lisen a sound, press FN+F5, then press ESC>F1 to enter setup (in my notebook)
Press PageUp PageDown to select pages with settings, in 1 from 3 page you see LCD settigs (or "display settings" or somthing else, im forget), change settings from AUTO-SELECT to LCD+VGA, save+exit
Help to search:
black screen when power on qosmio G30 -211 pqg32e

Display iPhone Screen on TV or Computer!!!!!!

does anybody know of an app or cable or device that i can use to display my iPhone screen on my TV or computer? I have both sets of Apples cables to connect to TVs, but they are only enabled when using as an iPod.
i want something like what is used to keynotes to view an iPhone screen on the external montior. There has to be a way because Apple displays the screens during keynotes, but it may not be one Apple wants the outside public to have. If you look at the keynote videos, there a big fat black cable that comes directly out of the iPhone.
i heard that it might be part of the iPhone developer tools. i am gong to get the SDK soon. so hopefully it is easy to do.
thanks in advance

Apple makes a cable 9actually 2 - one for regular tv and one for HD) that allows you to connect the iphone to a tv to play movies - i dont believe you can use it for any other application though

Snow like display on screen

Similar Messages

Maybe you are looking for