SNP heuristic error maximum number of orders per period reached

Hello All,
I am getting one strange error "APO SNP heuristic error maximum number of orders per period reached (000000040)"
Product XXX/ Location XXX: Maximum number of orders per period reached (000000040)
For the problem : PPDS heuristic is working fine, while running the SNP heuristic I am getting this problem.
Please let me know asap.
Thanks in Advance,
Kind Regards,
Santosh

There is a section in the IMG where you can change this behaviour.
in SPRO - SAP SCM - IMG
-> Advanced Planning and Optimisation
  -> Supply Chain Planning
    -> Supply Network Planning (SNP)
       -> Basic Settings
          -> Maintain Global SNP Settings
You will see the field "Heu.: Orders per Bkt" which should have the value of 40 in there, e.g. the limit to the number of orders SNP can raise in any planning bucket.
If you raise this number (to say 100) then hopefully your message will no longer be issued by the system.
Alternatively, you can check the cause of why the system is rasing so many orders. For example, check the lot size that the Product has for that location (lot-for-lot will create an order for every demand for example).
Hopr that helps
Regards
Ian

Similar Messages

  • Error "Maximum number of items in FI reached"

    Hi All,
    We are getting error "Maximum number of items in FI reached", if there are more than 999 items. We have found an SAP note "Note 36353 - AC interface: Summarizing FI documents".
    This note seems to do more with customizing & doesnt need any code changes.
    Our system is of release 4.6C, My concern is that, in the note it has been mentioned in the correction instruction 1258 that for release 4.6C the Valid Support Package is 46C-ALL SUPP. PACKAGES.
    If this support package is not available in the system does this SAP note work. I mean is this the prerequisite.
    Kindly suggest if this is the correct note as well.
    Thanks & Regards
    Abhii

    Hi Abhii,
    Please see following threads..
    Re: Maximum number of items in FI reached
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=301319
    Hope this helps...
    Best Regards,
    Archana

  • A/c Error 'Maximum number of item in FI reached' during invoice posting

    Invoice is created with multiple Delevery So no.of entriies has increased and accounting document has not been created due to error 'Maximum number of item in FI reached'.
    Accounting document not generated. How it be solved.
    Regards,
    Sohail

    dear
    maximum number of accounting line items is 999.
    if the total number of line items exceeds that value .. it would cause the error ....
    speak to FI guy and abap guy ..may be it could be increased but as far as i know its not changeable.
    you just need to reduce the items and processes in parts..
    regards

  • SPD 2013 WF Error: Maximum number of arguments per activity (50).

    Hi,
    We have hit a limit with using variables in SPD Designer workflow in SP2013. The following is the error message that we receive:
    "Microsoft.Workflow.Client.ActivityValidationException: Workflow XAML failed validation due to the following errors: Activity 'DynamicActivity' has 52 arguments, which exceeds the maximum number of arguments per activity (50)."
    The following thread >>here
    did provide a solution but we need a solution that's based on Powershell or Server Object Model. Is there an approach for changing the variable limit for workflows with Server Object Model/Powershell?
    Blog: http://dotnetupdate.blogspot.com |

    Hi Vikram,
    as i know if you want to change this, there is no other way then to update the database directly, that we strongly not recommend this to be done.
    they may not have any powershell or server object modal command to update the database value directly, instead you need to try on your environment, here is the example to access sql from powershell:
    http://technet.microsoft.com/en-us/magazine/hh289310.aspx
    to check the database, you can use the database explorer to develop the code:
    http://moresharepoints.blogspot.in/2014/01/sharepoint-designer-2013-workflow-error.html
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Error  "Maximum number of items in FI reached"   and " A syytem error is oc

    Hi All ,
    When i am upload recived goods by using movement type 202  using bapi
    bapi_goodsmovement_create  and line item is around 1000  then i m getting error some times
    "Maximum number of items in FI reached"   and " A syytem error is occuring when locking "
    plz tell what i  have to do
    thnx in advance

    FI documents have a 3-digit item counter that limits the number of
    items permitted per document.
    max 999
    solution
    << Cut and paste without attribution from the long text of the error message removed >>
    Edited by: Rob Burbank on Nov 27, 2009 3:12 PM

  • MRER Error - Maximum number of items in FI reached

    Hello Everyone,
    We have just upgraded our system to ECC 6.0 and we run the automotive extension set.  After the upgrade, when running MRER (RMMR1MRR) for a few vendors, we receive the following error message:
    Maximum number of items in FI reached
    I'm just curious to know if anyone else is running ERS in a like fashion, and if you've received this type of error. 
    Thanks in advance for your help!
    John Duncan

    Hi Abhii,
    Please see following threads..
    Re: Maximum number of items in FI reached
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=301319
    Hope this helps...
    Best Regards,
    Archana

  • Document Summarization - Maximum number of items in FI reached

    Hi
    I'm having a problem regarding document summarization.
    When trying to settle pipeline with tranaction MRKO and i'm getting an error "Maximum number of items in FI reached", this is due to the lines on the document being more than 999.
    I have in customizing, in transaction OBCY entered that summarzing being done.
    Can you please let me know exactly what fields I must summarize by or how to get it to work??
    Thanks in advance

    Hi
    I have tried using business transaction BKPFF,I have listed the below fields
    BSEG-MATNR
    BSEG-MEINS
    BSEG-MENGE
    BSEG-WERKS
    These fields are now blank in the accounting document. But it is still not summarizing. I have noticed that the text field is populated with different text.
    Is it possible to make this blank also? I'm hoping this is the problem.
    Or is there a way to tell the system to create several documents rather than one document?
    Apprecaite any response

  • Why i'm getting a warning 1021 even after changing The maximum number of connections per source (Unlimited) ?

    The maximum number of connections per source (Unlimited) for this connector has been reached by this source IP address.

    Hi Arun,
    In order to figure out the source of the problematic IP, we need to collect the following logs:
    Detail messages of the Error 1021 including the blocked IP address.
    Protocol log. We can search the specific IP address in the log to find more information about the sender. Here is the reference of
    Using the EAC to configure protocol logging.
    Besides, use the command below to verify if they are set as expected:
    Get-ReceiveConnector -Identity "this connector name" | select Message*,MaxInbound*
    Regards,
    Rebecca

  • Maximum number of events per audit log file must be greater than 0.

    BOE-XI (R2)
    Windows Server 2003
    Running AUDIT features on all services.
    Report Application Server (RAS) keeps giving the following error in the Windows Application Event Log.
    Maximum number of events per audit log file must be greater than 0.  Defaulting to 500.
    I am assuming that this is because the RAS is not being used by anyone at this time - and there is nothing in the local-audit-log to be copied to the AUDIT database.
    Is there any way to suppress this error...?
    Thanks in advance for the advice!

    A couple more reboots after applying service pack 3 seemed to fix the issue.
    Also had to go to IIS and set the BusinessObjects and CrystalEnterprise11 web sites to use ASP .NET 1.1 instead of 2.

  • VL09 hit error 'F5 727 ("Maximum number of items in FI reached")'

    Hi,
    I have one user who is trying to cancel GI for DO using transaction VL09 and hit the error 'F5 727 ("Maximum number of items in FI reached")'.  I know it is caused by FI document maximum item no is hit.  Is there a solution to cancel this GI document?  I have checked on SAP note: 0001353827 AC interface: Document split in FI for goods movements, but it does not solve my issue since the system release version is not compatible.
    Please help.
    Thanks in advance.
    Regards,
    Ling Ling

    I need to use VL09 to cancel the document, because I need to change the currency on the preceding document (PO).
    The case is a user created a Supply Chain PO, a DO created by reference to PO, then post good issue and post good receipt.  Then user found out the currency in PO was wrong, so  did cancellation on good receipt and good issue.  Good receipt is cancelled successfully, but cancel good issue via VL09 hit error.
    Instead of applying summarisation in FI, any suggestion for this issue?
    Thanks.

  • Error msg "Maximum number of items in FI reached" displayed while backflush

    Dear Gurus,
    The scenerio at our client's site is that of MTO using strategy group 50 and variant configuration.
    The production process goes through a sequence of three operations. Details are as under:
    1. Operation 10: Control key (PP01), all components (say some 1500) are allocated to this operation.
    2. Operation 20: Control Key (PP01), no components allocated to this operation.
    3. Operation 30: Control key ( PP03), no components allocated, AutoGR maintained in control key.
    Now the issue is while doing confirmation using T code CO1F, individually for all the operations, backflushing of some odd 900 components is not taking place. The components get stock in COGI. Each time these are to be cleared from COGI, although there is sufficient stock of these components for these components.
    The error msg that is being displayed in COGI is "Maximum number of items in FI reached".
    Pls suggest how to take care of it.
    Regards,
    Pradeep Santara

    Hi,
    The error is due to the maximum line items have been reached in FI.
    actually you cann't post more than 999 items in one acctg doc at one time.
    regards

  • GUI connection error MAXIMUM NUMBER OF CONNECTION HANDLES REACHED

    Dear Experts
    while logging on to GUI7.10 I am getting following error
    MAXIMUM NUMBER OF CONNECTION HANDLES REACHED'
    'MAXIMUM NUMBER OF HANDLES REACHED'. 'NO MORE MEMORY IS AVAILABLE'.
    'DO YOU WANT TO SEE DETAILED ERROR DESCRIPTION?'
    When i click on yes to the question above, i get the following:
    'COMPONENT = DPTM'
    'RELEASE = 7.10'
    'VERSION = 10'
    'RETURN CODE= -16'
    'Counter = 3
    This error is not allowing me work.
    Does anyone have a solution?

    Hi,
    I am having the same issue. Did you resolve the issue.
    Please let me know
    Regards

  • ICloud error "Maximum number of accounts activated on this device

    I keep getting the error "Maximum Number of acounts activated on this device whenever i enter my apple id and password in the iCloud option. Please help me..

    Welcome to the Apple community.
    It sounds as though you are pressing the "create Apple ID" button when trying to log into your account. You shouldn't use this button, it sounds as though you have used it a few times and have now used up all of your free accounts on that device.

  • How to change the maximum number of process per user in BW ?

    Hi,
    Do you know how to change the maximum number of process allowed per user ?
    With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
    In fact, my production environment reach always the max number of process available in SM50...
    Thanks a lot

    Hi,
    A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from  a list of N worl proceesor which has been taken the work.
    Correct if I am wrong.
    Regards
    Syed.

  • Essbase error maximum number of columns [1] exceeded [15]

    <p>I am getting Essbase error: maximum number of columns [1]exceeded [15]</p><p>This message started appearing after HBR 3.5.1 install</p><p>When I retireve from the same excel spreadsheet on a machinewhich does not have HBR installed it works. I do need to use HBRso, how do I resolve this?</p>

    Retrieving more than 500,000 rows in excel are you sure you are using the correct tool, sounds like you are just trying to data dump out of essbase, have a look at other export options.
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for