SNP - Heuristic -First Run Fails

Dear All,
I am Working on SCM 5.0 SNP..
Working on Following ..
1. Heuristic Run
2. Deployment
3.Trasport Load Builder (TLB)
We are running Heuristic on Daily Basis.
If i run Heuristic after loading new Tranportation Lane(Master Data) the FIRST run fails?
Why?
After loading the New Trasportation Lane..i always Check Low Level Code/Live Cache Consistency Check the also i am facing the above problem.
Plz help me to resolve the same.
Regards,
Rajesh patil

Hi Rajesh patil,
From your observations, it is clear that there is timelag required by system to update the master data (TL) newly maintained and the start of heuristic run.
1) Once the new TL is maintained, run consistency check (F9) to check for any errors
2) After maintaining the lane, ensure that the same is available in the active model
3) Once after maintaining the lane, clear all inbound and outbound queues before start of heuristic run.
4) Also run low level code/cons checks before start of the heuristic run.
Please confirm with your findings.
Regards
R. Senthil Mareeswaran.

Similar Messages

Heuristic Run - Fail

Dear All,
Working on SCM 5.0
Whenever i change/load the T- Lanes , next Day the first Heuristic Run Fails.
After Changing the T-Lane , i do the following,
1. Consistency Check - Planning Areas.
2. Consistency check - Live Cache
3. Low level Code.
Then also i am facing the same problem?
Why ? and how can i resolve the same..
Regards,
Rajesh Patil

Ya ..when u change T-lane/Load new T-Lane first Heuristic Run fails ...and in application log of Heuristic Run ... for some product- locations the source location isnot showing?
But when i rerun(2nd time) the same Heuristic it is working fine?.
As i am taking Daily Run..
plz guide me when i Change the T-lane ...Except the above consistency check is there any thing to do?
So the Heuristic will run smoothly.
Regards,
Rajesh Patil

ORA-3113 while running export (first run ok, second run fails)

Hi,
I'm running 10g (10.1.0.2.0) on gentoo Linux.
After a restart of the database I can do an EXP for any user without errors. But when I repeat the same command after the export I get the following error:
. . exporting table WEB_SESSION_DATA 0 rows exported
. exporting synonyms
EXP-00008: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
EXP-00000: Export terminated unsuccessfully
It's always the same error on the same task (exporting synonyms) but always just for the second and any later export, while the first one is ok.
I read through some forums and found, that ORA-3113 is a standard error which just hides the real error. So I look into the trace files and found:
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [jox_lookup_known_object()+413] [SIGSEGV] [Address not mapped to object] [0x1AD14034] [] []
Current SQL statement for this session:
SELECT SYNNAM, DBMS_JAVA.LONGNAME(SYNNAM), DBMS_JAVA.LONGNAME(SYNTAB), TABOWN, TABNODE, PUBLIC$, SYNOWN, SYNOWNID, TABOWNID, SYNOBJNO FROM SYS.EXU9SYN WHERE SYNOWNID = :1 ORDER BY SYNTIME
If I call this SQL from sqlplus I get the same ORA-3113, so this seems to be the cause for the export failure.
When I remove the DBMS_JAVA.LONGNAME calls from the statement, it runs fine. It also runs fine, when I add a "and 1=0" to the EXU9SYN view. But this will not really solve the problem, because then all synonyms don't get exported.
I also checked all the synonyms and they are valid, the referenced tables exist and can be queried.
Because we use JavaStoredProcedures I cannot remove the Java Features in Oracle. But I reinstalled it (rmjvm.sql and initjvm.sql) but this did not help.
Does anyone have an idea what's happening here?
Especially the "first run ok, second run fails" seems to be very strange, because DB objects including DBMS_JAVA should be ok, if the first export can be done. So what changes in the database during or after the first run?

Maybe description for bug 3953108 (ORA-7445 AND ORA-3113 DURING DIRECT FULL DATABASE EXPORT OF PUBLIC SYNONYMS) is helpful.
Werner

UCCE Record Agent Greeting Exaple Script Fails at first Run Ext Script Node

I am deploying Agent Greeting and trying to get the recording piece completed. When the example script gets to the run ext script node it fails.

I am running 9.0 for UCCE, CUCM, and CVP.....When I press the record button on CTIOS agent I get a 101707 error with somthing about the route. Then I do a script monitor I notice the flow stops at the first run ext script node
I have attached the PG Logs
Sorry about the vagueness in the first post just seeing if any knew of this issue with the example scripts.

Long running SNP heuristic in the background

Dear Experts,
In SCM 5.0, randomly we encounted an issue where running SNP heuristic takes a long time to run and never completed...usually, this will takes less than couple hours to complete.
I checked with Basis and they confirmed the sytem operates normally. Can you advise what would caused the long running issue and how I can prevent it.
Thanks,
Tom

Dear Tom,
1. It will be useful to run Low level code determination procedure before running the SNP heuristcis to improve the performance.
2. Secondly, I hope you are using parallel processing profiles functionlity. This will certainly help .
3. We used seperate jobs location specific for SNP heuristics and ran some jobs in parallel with some offset / delayed start
4. Running SNP heuristics only for the active products always helps, rather than running SNP heuristics for all products ( actvie products , obsoloete codes, ). One of the way may be to have seperate SNP planner codes to seperate out obsolete codes
I hope these steps may help.
Regards
Datta

Max stock level as safety stock from material master while running SNP Heuristic

Hi Experts,
Our user wants to consider max stock level as safety stock from material master while running SNP Heuristic, not the actual safety stock.
Is there any possibility for this setup?
--Kishore

Hi Kishore,
With the given details I suggest that the user can maintain the max stock level values directly in safety stock field of the material master for all materials to be planned by SNP heuristic (keeping the max stock level field blank). Then this safety stock field (which has actually the max stock level values) will update the safety stock values in APO product master and in turn can be considered for SNP heuristic.
Note: The max stock level field in APO product master is used by SNP heuristic only when the target stock level method is maintained as 4, 5 or 6. Since your requirement is to use max stock level as safety stock, so it does not look like that you will be using these target stock level methods or the max stock level field in R/3 and APO. So, this can be left as blank in both R/3 and APO.
Please let me know if this helps.
Regards,
Umesh

SNP Heuristic recreation and adding of Purchase requisition

Dear All
Thanking In advance,
Critical Issue
We have scheduled a heuristic run for 7 FERT materials,
Run was successful in simulation version, When we take a re-run
(heuristic) on the same data,It is adding the quantities of the
forecast to the same purchase requisition for only two FERTS, for
others it is deleting and recreating purchase requisition same as the
forecast requirement. This in turn is leading to doubling of
requirement for these two FERTS at the lower BOM materials.
e.g.If demand is 10 and we run heuristic in first run it will create 10
purchase requisitions, if we Re-run heuristic on the same data it is
adding 10 more quantity for same purchase requisition.
Before generating the requisitios it will show the message Invalid order and help of which shows "Order does not exist in Live-Cache"
What could be the reason for this?
Amol

Dear all,
problem solved by upgarding Support Pack to 15.0
Amol
Edited by: Amol Chavan on Jan 21, 2008 4:08 PM

SNP heuristic error maximum number of orders per period reached

Hello All,
I am getting one strange error "APO SNP heuristic error maximum number of orders per period reached (000000040)"
Product XXX/ Location XXX: Maximum number of orders per period reached (000000040)
For the problem : PPDS heuristic is working fine, while running the SNP heuristic I am getting this problem.
Please let me know asap.
Thanks in Advance,
Kind Regards,
Santosh

There is a section in the IMG where you can change this behaviour.
in SPRO - SAP SCM - IMG
-> Advanced Planning and Optimisation
-> Supply Chain Planning
    -> Supply Network Planning (SNP)
       -> Basic Settings
          -> Maintain Global SNP Settings
You will see the field "Heu.: Orders per Bkt" which should have the value of 40 in there, e.g. the limit to the number of orders SNP can raise in any planning bucket.
If you raise this number (to say 100) then hopefully your message will no longer be issued by the system.
Alternatively, you can check the cause of why the system is rasing so many orders. For example, check the lot size that the Product has for that location (lot-for-lot will create an order for every demand for example).
Hopr that helps
Regards
Ian

Period factor VS SNP heuristic & deployment heuristic

Hi ,
I am using period factor to decide avalabilty date with in each bucket. i know first periority would be period factor in Tlane . accordingly i maintained period factor 0 .
SNP heuristics cretaes the receipts in the start of the buckets since period factor is ZERO.
But when i execute Deployment heuristic its NOT cretating in the start of the bucket. instead its creating middle of the each bucket
My questuion is.....
1) period factor setting is only for SNP Heuristic NOT for deployment heuristic???
2) if thats the case how to decide manually creation date in deployment?
3) Receipts available in middle of the bucket , But depoyment confirms the demand in the START of the bucket ? logically how its possible. it should not be???
Regards
Rajesh

Hi,
My understanding is that period factor of 0 is interpreted as 0.5 by heuristics.
So in your case Heuristics should create stock transfers in the middle of the bucket and deployment should just confirm it.
Please let me know the following.
You have maintained factor 0.5 in lane right?
Have you maintained any value in the product master?
What is your deployment method, pull or some type of Push?
What is your bucket type (days/weeks/months)?
Hi Claire,
I do not understand why a simple pull deployment has to schedule the stock transfers again?
It should just check the ATD qty and confirm the heuristic order, if possible right?
Could you please explain your point further with a scenario?.
Regards,
Ashok

Fixed pegging with SNP heuristic

Hello Guys,
I have a requirement from the client and to achieve this i wanted SNP heuristic to consider fixed pegging created manually.
So i have the below doubts:
1. Do SNP Heuristic consider the manual fixed pegging. I tested the scenario but its not working.
2. Is there a work around to it.
Thanks
Kishor

Hi Cyrille,
Thanks for quick response.
Let me explain the scenario,
                   wk1     wk2
Forecast      10
Receipt        10
The above situation after SNP planning run.
                   wk1      wk2
Forecast      10
Receipt                    10
2nd table is after pushing the receipt to wk2 manually.Now when i ran SNP heuristic, its creating another receipt on wk1 of 10, which is a situation of excess supply.
I do not want heuristic to create another receipt for wk1. Manual fixing can help, if heuristic will consider it.
Please help.
Thanks
Kishor

First Request fails with Error 500.00

Good morning Pro's!
Although I have allready installed many ColdFusion release's, I'm running in a very strange problem with my ColdFusion 8.01 32bit on my Windws 2008 R2 64bit (IIS7) server:
When I'm trying to connect to any ColdFusion Website, the FIRST request fails with an 500.00 Error -> IsapiModule - ExecuteRequestHandler - AboMapperCustom-18532 - ErrorCode: 0x800703e9. When I reload the page, the Website is running until I restart IIS and the same problem starts again.
AppPools are configured to 32-bit Apps
Thanks for your help!
Mätu

I solved the Problem
I had to set the UserRights of the IIS_IUSRS to FullAccess for the ColdFusion Dir

My compiled program crashes after first run (LabVIEW 2009)

I have a compiled program created with LabVIEW 2009 that on the first run after the computer is re-booted will work fine but after shutting down the program it will not run properly.
The program uses a compiled launcher to dynamically activate a set of VI's containing Queue Driven State Machines (QDSM). On subsequent program starts the launcher module comes up fine and its progress bar shows that it is launching each of the VI's. Once the launcher is complete it removes itself from memory leaving the dynamically launched VI's running. The subsequent launches which fail the main user interface VI pops up barely long enough for the observer to see (if at all) then shuts down. The program is then gone from memory as far as I can tell. There are no processes in memory or anything.
Additionally, the when I try to run the installed version of the exe on a computer that has the 2009 development environment installed I get this behavior consistently with a successful run even once.
In both cases my program does not throw any errors (which are logged) nor does the runtime engine generate any that I can see. Also, when I run my program in the development environment the program does not behave this way. It has no problems at all.
I have used this style of architecture before in LV8.6 with out any problems. Can anyone suggest some possible solutions or even some debugging tips? I have never had a problem that I could not duplicate in the development environment so I am unsure how begin attacking my issue.
Thanks for any help.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!
Solved!
Go to Solution.

I have solved the problem I think (at least as far as testing to this point has revealed). After I added in the ability to log the states passed to the QDSM's, I was able to determine that the program was "crashing" after I dynamically closed the front panel of the launcher. My program was designed to close the front panel of the launcher then pop-up the front panel of the main UI. My EXE is built on to contain the launcher with my other QDSM files being maintained externally in specific directories. What appeared to be happening is that when the launcher closed its front panel and before the UI opened up the run-time engine would decide since there were no windows open it would close itself down. This is my supposition about what may be happening any way. I modified my code to changed the launcher window to hidden and delay for 1/2 a second to give the main UI a chance to start fully running. This fixed the problem, or at least worked around it. If someone out there can explain to me exactly what is happening I sure would appreciate it.
Thanks for all the help those of you who responded. Your advice was very beneficial and certainly led me to a resolution faster.
Jason
Wire Warrior
Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

Help First Aid Fails From Install Disk

My I-Mac G-5 crashed and on restart is displaying the grey screen with the question mark instead of finding the os / hard drive. I rebooted again from the install disk holding down C and when I went to verify and repair the disk... the repair option wasn't selectable and when I select verify i get this message
"First Aid failed
"Disk Utility stopped repairing permissions on '(volume name)' because the following error was encountered: No valid packages"
The Apple support on this topic here
http://docs.info.apple.com/article.html?artnum=25704
only covers when the application disk utility fails from your OS... But its failing for me from my INSTALL Disk.
Thanks in advance!

That error occurs because either the /Library/Receipts/ folder has been deleted or its contents were deleted. Without that DU will not function. This is because when you repair permissions Disk Utility uses the Receipts folder on the OS X volume being repaired.
However, it cannot fix your problem. Your problem results from damaged or corrupted system files required during startup. The only solution is to reinstall OS X. You may be able to do this without erasing the drive by doing an Archive and Install:
How to Perform an Archive and Install
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

VMware Fusion 4.0.1 - Installation/First Run Error

Since the VMware forums won't let me post for some reason, I thought I might post it here. Just installed VMware Fusion 4.0.1. On first run the application crashes right after requesting the sudo password:
Here's the VMware log:
2011-09-14T20:53:29.857-05:00| VMware Fusion| I120: Log for VMware Fusion pid=448 version=4.0.1 build=build-474597 option=Release
2011-09-14T20:53:29.857-05:00| VMware Fusion| I120: The process is 64-bit.
2011-09-14T20:53:29.857-05:00| VMware Fusion| I120: Host codepage=UTF-8 encoding=UTF-8
2011-09-14T20:53:29.857-05:00| VMware Fusion| I120: Host is Mac OS X 10.7.1 (11B26)
2011-09-14T20:53:28.677-05:00| VMware Fusion| I120: VTHREAD initialize main thread 3 "VMware Fusion" pid 448
2011-09-14T20:53:28.677-05:00| VMware Fusion| I120: UTIL: Change file descriptor limit from soft 256,hard 4294967295 to soft 8192,hard 4294967295.
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Library/Preferences/VMware Fusion/config": No such file or directory.
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: PREF Optional preferences file not found at /Library/Preferences/VMware Fusion/config. Using default values.
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Applications/VMware Fusion.app/Contents/Library/settings": No such file or directory.
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: PREF Optional preferences file not found at /Applications/VMware Fusion.app/Contents/Library/settings. Using default values.
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Applications/VMware Fusion.app/Contents/Library/config": No such file or directory.
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:28.683-05:00| VMware Fusion| I120: PREF Optional preferences file not found at /Applications/VMware Fusion.app/Contents/Library/config. Using default values.
2011-09-14T20:53:28.750-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:28.750-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Users/franclop/Library/Preferences/VMware Fusion/config": No such file or directory.
2011-09-14T20:53:28.750-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:28.750-05:00| VMware Fusion| I120: PREF Optional preferences file not found at /Users/franclop/Library/Preferences/VMware Fusion/config. Using default values.
2011-09-14T20:53:28.751-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:28.751-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Users/franclop/Library/Preferences/VMware Fusion/preferences": No such file or directory.
2011-09-14T20:53:28.751-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:28.751-05:00| VMware Fusion| I120: PREF Failed to load user preferences.
2011-09-14T20:53:29.761-05:00| machPoll| I120: VTHREAD start thread 4 "machPoll" pid 448
2011-09-14T20:53:29.771-05:00| VMware Fusion| I120: UUID: Unable to open /dev/mem: No such file or directory
2011-09-14T20:53:29.771-05:00| VMware Fusion| I120: REM-USB: Protocol version min:15 current:16. hostId:52 59 21 fa 5c 31 6f 77-fc 4b e9 88 45 4b 9c 70
2011-09-14T20:53:29.818-05:00| VMware Fusion| I120: REM-USB: Initializing 'Generic' backend
2011-09-14T20:53:30.787-05:00| VMware Fusion| W110: Using log file /Users/franclop/Library/Logs/VMware Fusion/vmware-vmfusion.log
2011-09-14T20:53:31.015-05:00| VMware Fusion| I120: Msg_SetLocaleEx: HostLocale=UTF-8 UserLocale=en
2011-09-14T20:53:31.015-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:31.015-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Applications/VMware Fusion.app/Contents/Library/messages/en/vmware.vmsg": No such file or directory.
2011-09-14T20:53:31.015-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:31.113-05:00| VMware Fusion| I120: UUID: Unable to open /dev/mem: No such file or directory
2011-09-14T20:53:31.169-05:00| VMware Fusion| I120: HOSTDEV-MAC: HostDeviceInfo_FindHostSoundDevices: Found default sound devices [AppleHDAEngineOutput:1B,0,1,2:0|AppleHDAEngineInput:1B,0,1,0:1].
2011-09-14T20:53:31.173-05:00| VMware Fusion| I120: Warning: Could not open /proc/net/dev
2011-09-14T20:53:31.173-05:00| VMware Fusion| I120: Warning: SGHostEnumerate not yet implemented
2011-09-14T20:53:31.173-05:00| VMware Fusion| I120: SMBIOS: can't open /dev/mem: Could not find the file
2011-09-14T20:53:31.173-05:00| VMware Fusion| I120: VmhsHostInfoPopulateSystem: Could not get information from smbios to populate VMDB.
2011-09-14T20:53:31.173-05:00| VMware Fusion| I120: UUID: Unable to open /dev/mem: No such file or directory
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Foundry Init: setting up global state (1 poll threads, 0 worker threads).
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: vixLogLevel = 0
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: vixApiTraceLevel = 0
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: vixDebugPanicOnVixAssert = 0
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: vixLogRefcountOnFinalRelease = 0
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: asyncOpWarningThreshold = 1000000
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: enableSyncOpSelection = FALSE
2011-09-14T20:53:31.265-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: enableExternalThreadInterface = TRUE
2011-09-14T20:53:31.266-05:00| VMware Fusion| I120: Vix_InitializeGlobalState: enableVigor = FALSE
2011-09-14T20:53:31.266-05:00| VMware Fusion| I120: Msg_SetLocaleEx: HostLocale=UTF-8 UserLocale=en
2011-09-14T20:53:31.266-05:00| VMware Fusion| I120: Msg_Reset:
2011-09-14T20:53:31.266-05:00| VMware Fusion| I120: [msg.dictionary.load.openFailed] Cannot open file "/Applications/VMware Fusion.app/Contents/Library/messages/en/vmware.vmsg": No such file or directory.
2011-09-14T20:53:31.266-05:00| VMware Fusion| I120: ----------------------------------------
2011-09-14T20:53:31.267-05:00| VMware Fusion| I120: VixHost_ConnectEx: version -1, hostType 3, hostName (null), hostPort 0, options 8707
2011-09-14T20:53:39.055-05:00| VMware Fusion| W110: Caught signal 11 -- pid 448
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: eip 0x7fff8284be90 esp 0x7fff5fbff7c0 ebp 0x7fff5fbffc10
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: eax 0x103842278 ebx 0x103842038 ecx 0x103842270 edx 0xa1a1a1a1 esi 0x7fff8798cd88 edi 0x103693970
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF7C0 : 0x03842278 0x00000001 0x8285103c 0x00007fff
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF7D0 : 0x5fbff8d0 0x00007fff 0x03842038 0x00000001
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF7E0 : 0x03596660 0x00000001 0x00000004 0x00000000
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF7F0 : 0x00001400 0x00000000 0x00000040 0x00000000
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF800 : 0x03594a00 0x00000001 0x00000002 0x00000000
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF810 : 0x03596668 0x00000001 0x03596650 0x00000001
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF820 : 0x03596660 0x00000001 0x03596658 0x00000001
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: SIGNAL: stack 7FFF5FBFF830 : 0xfccf0004 0x0000001a 0x03595e04 0x00000001
2011-09-14T20:53:39.055-05:00| VMware Fusion| I120: Backtrace:
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[0] 00007fff5fbff1d0 rip=0000000101760b2d rbx=0000000000000000 rbp=00007fff5fbff1f0 r12=0000000101760900 r13=000000000000000b r14=000000000000000b r15=a3a3a3a3a3a3a300
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[1] 00007fff5fbff200 rip=0000000101843ec4 rbx=0000000000000080 rbp=00007fff5fbff260 r12=00007fff5fbff708 r13=000000000000000b r14=000000000000000b r15=a3a3a3a3a3a3a300
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[2] 00007fff5fbff270 rip=00007fff8871acfa rbx=00007fff5fbff708 rbp=00007fff5fbff270 r12=0000000103842000 r13=00007fff8284c04c r14=0000000103842000 r15=a3a3a3a3a3a3a3a3
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[3] 00007fff5fbff7c0 rip=00007fff8284be91 rbx=00000000a1a1a1a1 rbp=00007fff5fbffc10 r12=0000000103842000 r13=00007fff8284c04c r14=0000000103842000 r15=a3a3a3a3a3a3a3a3
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[4] 00007fff5fbffc20 rip=00007fff82b596a5 rbx=00000000a1a1a1a1 rbp=00007fff5fbffc30 r12=0000000103842000 r13=00007fff8284c04c r14=0000000103842000 r15=a3a3a3a3a3a3a3a3
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[5] 00007fff5fbffc40 rip=00007fff83ed2f01 rbx=00007fff8798cd88 rbp=00007fff5fbffc70 r12=0000000103842000 r13=00007fff8284c04c r14=0000000103842000 r15=a3a3a3a3a3a3a3a3
2011-09-14T20:53:39.074-05:00| VMware Fusion| I120: Backtrace[6] 00007fff5fbffc80 rip=0000000100004850 rbx=00000001036339f0 rbp=00007fff5fbffd00 r12=0000000103842000 r13=00007fff8284c04c r14=00007fff8284c04c r15=000000010430bd10
2011-09-14T20:53:39.092-05:00| VMware Fusion| I120: SymBacktrace[0] 00007fff5fbff1d0 rip=0000000101760b2d in function Util_BacktraceWithFunc in object /Applications/VMware Fusion.app/Contents/MacOS/../Frameworks/libvmwarebase.dylib loaded at 0000000101441000
2011-09-14T20:53:39.094-05:00| VMware Fusion| I120: SymBacktrace[1] 00007fff5fbff200 rip=0000000101843ec4 in function Sig_Callback in object /Applications/VMware Fusion.app/Contents/MacOS/../Frameworks/libvmwarebase.dylib loaded at 0000000101441000
2011-09-14T20:53:39.094-05:00| VMware Fusion| I120: SymBacktrace[2] 00007fff5fbff270 rip=00007fff8871acfa in function _sigtramp in object /usr/lib/system/libsystem_c.dylib loaded at 00007fff88678000
2011-09-14T20:53:39.094-05:00| VMware Fusion| I120: SymBacktrace[3] 00007fff5fbff7c0 rip=00007fff8284be91 in function objc_msgSend in object /usr/lib/libobjc.A.dylib loaded at 00007fff82842000
2011-09-14T20:53:39.094-05:00| VMware Fusion| I120: SymBacktrace[4] 00007fff5fbffc20 rip=00007fff82b596a5 in function _CFAutoreleasePoolPop in object /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation loaded at 00007fff82b28000
2011-09-14T20:53:39.095-05:00| VMware Fusion| I120: SymBacktrace[5] 00007fff5fbffc40 rip=00007fff83ed2f01 in function -[NSAutoreleasePool release] in object /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation loaded at 00007fff83eca000
2011-09-14T20:53:39.095-05:00| VMware Fusion| I120: SymBacktrace[6] 00007fff5fbffc80 rip=0000000100004850 in function (null) in object /Applications/VMware Fusion.app/Contents/MacOS/VMware Fusion loaded at 0000000100000000
2011-09-14T20:53:39.095-05:00| VMware Fusion| W110:
2011-09-14T20:53:39.095-05:00| VMware Fusion| W110+ The core dump limit is set to ZERO; no core dump should be expected
Since I was just evaluating the software I do not have a software agreement to open a ticket. Any ideas would be helpful....
Thanks,
TheAmdMAN

Yes, yes, all of the usual. I'm posting here so just in case someone knows what usually causes this:
Caught signal 11
If it's plist files that could cause it or running programs, etc. I'm not looking for any assistance with standard troubleshooting techniques but thanks for the thought.
Eventually I'll either purchase it (since it works on my iMac just fine) and open a case or give up and stay with 3.1.3 until a later version comes out.
Again thanks for the assistance.
UPDATE:
Finally got access to VMTN, posted this below:
http://communities.vmware.com/thread/328440
Thanks....

New DVR Issues (First Run, Channel Switching, etc.)

I've spent the last 30 minutes trying to find answers through the search with no luck, so sorry if I missed something.
I recently switched to FIOS from RCN cable in New York. I've gone through trying to setup my DVR and am running into issues and was hoping for some answers.
1. I setup two programs to record at 8PM, I was watching another channel at the time and only half paying attention. Around 8:02 I noticed a message had popped up asking if I would like to switch channels to start recording. I was expecting it to force it to switch like my old DVR, but in this case it didn't switch and I missed the first two minutes of one of the shows. I typically leave my DVR on all day and just turn off the TV, this dual show handling will cause issues with that if I forget to turn off the DVR. Is there a setting I can change that will force the DVR to choose one of the recording channels?
2. I setup all my recordings for "First Run" because I only want to see the new episodes. One show I setup was The Daily Show on comedy central, which is shown weeknights at 11pm and repeated 3-4 times throughout the day. My scheduled recordings is showing all these as planned recordings even though only the 11pm show is really "new". Most of the shows I've setup are once a week so they aren't a problem, but this seems like it will quickly fill my DVR. Any fixes?
Thanks for the help.
Solved!
Go to Solution.

I came from RCN about a year ago. Fios is different in several ways, not all of them desirable. Here are several ways to get--and fix--unwanted recordings from a series recording setup.
Some general principles.
Saving changes. When you originally create a series with options, or if you go back to edit the options for an existing series, You MUST save the Series Options changes. Pretty much everywhere else in the user interface, when you change an option, the change takes effect immediately--but not in Series Options. Look at the Series Options window. Look at the far right side. There is a vertical "Save" bar, which you must navigate to and click OK on to actually save your changes. Exiting the Series Options window without having first saved your changes loses all your attempted changes--immediately.
Default Series Options. This is accessed from [Menu]--DVR--Settings--Default Series Options. This will bring up the series options that will automatically be applied to the creation of a NEW series. The options for every previously created series will not be affected by a subsequent modification of the Default Series Options. You should set these options to the way you would like them to be for the majority of series recordings that you are likely to create. Be sure to SAVE your changes. This is what you will get when you select "Create Series Recording" from the Guide. When creating a new series recording where you think that you may want options different from the default, select "Create Series with Options" instead. Series Options can always be changed for any individual series set up later--but not for all series at once.
Non-series recordings. With Fios you have no directly available options for these. With RCN and most other DVRs, you can change the start and end times for individual episodes, including individual episodes that are also in a series. With Fios, your workarounds are to create a series with options for a single program, then delete the series later; change the series options if the program is already in a series, then undo the changes you made to the series options later; or schedule recordings of the preceding and/or following shows as needed.
And now, to the unwanted repeats.
First, make sure your series options for the specific series in question--and not just the series default options--include "First Run Only". If not, fix that and SAVE. Then check you results by viewing the current options using the Series Manager app under the DVR menu.
Second, and most annoying, the Guide can have repeat programs on your channel tagged as "New". It happens. Set the series option "Air Time" to "Selected Time". To make this work correctly, you must have set up the original series recording after selecting the program in the Guide at the exact time of a first run showing (11pm, in your case), and not on a repeat entry in the Guide. Then, even it The Daily Show is tagged as New for repeat showings, these will be ignored.
Third, another channel may air reruns of the program in your series recording, and the first showing of a rerun episode on the other channel may be tagged as "New". These can be ignored in your series if you set the series option "Channel" to "Selected Channel". Related to this, if there is both an SD and HD channel broadcasting you series program, you will record them both if the series option "Duplicates" is set to "Yes". However, when the Channel option is set to "Selected Channel", the Duplicates Option is always effectively "No", regardless of what shows up on the options screen.
As for you missing two minutes, I have sereral instances in which two programs start recording at the same time. To the best of my recollection, whenever the warning message has appeared, ignoring it has not caused a loss of recording time. You might have an older software version. Newest is v.1.8. Look at Menu--Settings--System Info. Or, I might not have noticed the loss of minutes. I regularly see up to a minute of previous programming at the start of a recording, or a few missing seconds at the beginning or end of a recording. There are a lot of possibilities for that, but the DVR clock being incorrect is not one of them. With RCN, the DVR clocks occasionally drifted off by as much as a minute and a half.

SNP - Heuristic -First Run Fails

Similar Messages

Maybe you are looking for