SNP Network Heuristic and Location Heuristic

Hello Experts,
We've recently upgraded our APO sandbox landscape from SCM 4.1 to SCM 7.0.
Upon testing, I'm running into an issue where running the network heuristic will not create any planned production orders. However, if you run the location heuristic, planned orders will be generated.
What am I missing?
Thanks,
Susan

Hello Susan,
Please check if note 1502081 is implemented. If not, please apply.
I have seen this same issue for other companies and the note solved that, even with different description, but the code should
fix the issue.
Regards,
Michel Bohn

Similar Messages

SNP Network Heuristic - Purchase Requistion planned w/out source of supply

Dear Experts,
We have a T-lane setup from the source location A to destination B for a particular material. However, when running SNP Network heuristic, it generated SNP Purchase Requisition with out a source of supply. Can you please help me understand what would caused this?
Thank you so much for your input.
Tom.

Hi Satyajit,
My situation is we have two T-Lanes:
Tlane 1 - Source A Destination B
T lane 2 - Source B Destination A
I believe that in Network heuristic system does not allow any recursive T lane as it fails to determine low level code resulting no propagation of demand to next level. This resulted in no source of supply.
Can you please confirm if that is the limit of Network Heuristic? Our business scenario required to have recursive Tlane, is there a way to get Network Heuristic to work correct? How to setup low level code?
Thanks for all your help.
Tom

Need info on Product interchangeability in SNP using Optimizer and Heuristi

Can anyone suggest steps to configure product interchangeability in SNP using Optimizer and Heuristics
we have a scenario for 1:1 config of predecessor and succesor product , same Units, across locations using Full and Forward directions for some combiantions of products.
I would like to know prerequsites to configure this setup and any good links that lead to config steps.

Hi,
You can refer these help library for further help
http://help.sap.com/saphelp_scm70/helpdata/en/21/186b398c15ef59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/2e/847337613fbc40e10000009b38f8cf/frameset.htm
Thanks,
nandha

Background Network Heuristic planned for component which it should not be

Hello Expert,
I ran a Network Heuristic in the background without selecting the option "Take into account found components in planning run". However, when the job completed, I review the log and it showed that the components also being planned as well.
Looks like the background planned for components regardless of this option check or not. Please advise
Thanks,
Tom

Hi,
You mean to say that system fully plans the components with or without setting the indicator "Take into account ........".
To me behaviour expected may be as below with additional setting of u201CNet Change planning u201C
Without setting the indicator( "Take into account ......") , System may be only exploding the dependent demand for a BOM level in the first production location found in the planning direction. The dependent demand may be neither covered nor to be propogated further by the supply chain.
With setting indicator, the dependent demands are expected to be covered and furter propogation.
Regards
Datta

I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

I set up a new user on my network today and am now in a location without access to that network. I just set her up as a user on her macbook but I can't log in with her credentials. Is that because I am not on the network and it is the initial setup?

You need to set the option to create a mobile account using the Directory Utility app.

I cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data

i cannot connect to the net using 3G, i have ipad2 16GB, i have tried resetting my ipad2, and resetting the network setting, my location is here in riyadh, everitime i try to connect to the net theres a pop message saying "could not activate cellular data network, please help me guys thanks.....

Thanks for the quick response. No, I did not get any error messages or any terms-of-usage screen. The employee I told my problem to was not computer savvy either. She just suggested I move to different spots w/in the library to see if that would make a difference. It didn't. When I connected to the library WiFi it did change the Verizon 3G that is usually in the upper left corner to iPad with two to three emanating arcs. I may have to go to the library in the next town. I was able to connect to theirs in the past when I had to download something greater than 20 MB. Unless I really want it, I will probably not even try to download something more than 20 MB due to the hassle. Yeah, I may have been better off getting a normal desktop or laptop and getting WiFi at home. To do that now would mean having my iPad 2 and a desktop computer, which I feel is extravagant. (I know there are a lot of big spenders out there who got the iPad as additional gadget for fun. This is a rich country.) A Verizon rep told me I couldn't set up a WiFi router at home just using an iPad. So it seems like a person who just uses 3G is limited to surfing the net (not even much YouTube because it eats a lot of data) and using email. I read about an app that helps print wirelessly using 3G, but a reviewer said you had to be an engineer to get it done right. BTW, I like the Steelers. I'm old enough to remember Franco Harris and that blond guy whose name escapes me back in the '70s. Since I live in North Jersey I feel I have to support the Giants. But I know football about as well as computers.

TS4006 "Find my IPhone" app on my iPad can't even locate the iPad I'm using. And I'm on a WiFi network and location services are turned on. Ideas?

I'm using the "Find my IPhone" app on my iPad and it can't even locate the iPad I'm using, not to mention the iPhone I'm looking for. They are both listed as devises, it just says they're both offline, which I know is wrong. I'm on a WiFi network and location services are turned on. Ideas?

Is Settings > Privacy > Location Services > Find My iPad turned ON?

Exclude QM lot stock for a perticular material and location for PPDS run

Hi Experts,
I would like to exclude QM lot stock for a perticular material and location for PPDS run. I have unchecked stock in quality inspection under productmaster/ Demand / availability stock in APO, but still QM lot is appearing in RRP3 view and considering for PPDS heuristic run.
Can you plesae explain how to exclude QM lot for a PPDS run.
--Kishore

Hi Kishore,
Some companies do not activate the iModel for Inspection Lots and manage the Inspection Lots as Quality Inspection Stock. For example this how it looks an Inspection Lot in RRP3 if you manage the Inpsection Lots as Stock in Quality Inspection:
Because you are using the iModel transferring Inspection Lots as QM Lots, you can not use the Stock in Quality.
You can read about it in the help of the field Inspection Lots in CFM1. This is the help:
Inspection Lots in Integration Model
You use this indicator to activate the transfer to SAP APO of inspection lots
that are relevant to stock.
Dependencies
You can only activate an integration model for inspection lots if you have
set in CIF Customizing that inspection lots should be transferred for materials
relevant to inspection lots instead of qualitiy inspection stock.
If the inspection lots in SAP APO are to contain the characteristic value
assignements of the batches assigned to them, you have to transfer the
characteristic value assignments to SAP APO before activating the integration
model for inspection lots. You can do this by activating an integration model
for stock.
Hope this clairy your doubt.
Kind Regards,
Mariano

Network based and a-gps, data use tests

i was trying to find this kind of info, but only found others asking.
i hope this is useful info for others, especially while roaming.
skip to the bottom for conclusion,
this is the process i took:
i called nokia tech support,
their phone support his horrible,
the people on the phone don't actually know anything, and have to look up everything you ask them.
they were the worst.
i emailed nokia tech support.
my message was:
"i would like to know the difference between assisted gps positioning, and network based positioning. these are 2 of the 4 options on my nokia e66 for positioning methods. i would like to know if network based positioning uses internet data from my service provider to obtain my gps position. i am especially concerned with this function while i'm roaming internationally, as i do not want to be charged for roaming data use."
in about half hour they responded w/ an answer, and then 45 min after that someone else responded w/ an answer.
the first response, minus the hello's etc. was:
"In response to your email, Assisted GPS and Network Based positioning methods generate costs related to data traffic so you will be charged for data use. Only "normal" GPS and Bluetooth GPS do not generate additional costs related to data traffic.
Normal GPS is quite slow and does not work indoors. Therefore, it is recommended to enable at least A-GPS to get a faster position outdoors.
Network based and Wi-Fi positioning also allow you to update your position inside buildings, but they cannot be used for navigation."
the 2nd response was:
"In response to your inquiry, the difference between Assisted GPS positioning (A-GPS) and Network based positioning is that, A-GPS uses satellites while Network based positioning is based on information of your cellular network environment. It allows you to update your position inside buildings, but they cannot be used for navigation. Both positioning methods generate costs related to data traffic (unless you have configured the device to use Wi-Fi connection to make the internet connection). The cost may vary while you are on roaming. Kindly contact the service provider for information about data transmission costs."
i can also respond w/ more questions, but instead did some tests, starting with sitting home, indoors, and eventualy moving to a window w/ lots of sky.
test 1:
i enabled:
integrated gps
network based
assisted gps
opened maps,
set maps to be offline,
set default internet access point to my home wlan network,
closed maps,
cleared all counters and the log on the phone's communication log.
opened maps
there is a pink circle around the area i may be in,
the icon that would show gps satellite strength, changes to show the cell phone antenna icon.
but the packet data counter is sending/receiving a total of around 3-8kb immediately, and over the course of time, it keeps adding up, every 1-2 minutes, and it is shown as packet data to/from the access point "at&t internet"
over the course of ten minutes, it's been about 43kb.
and i can tell on the phone's home screen that the packet data connection becomes active when it does.
the maps kb indicator still says 0.0kb, with a line through the double arrow packet data symbol.
test 2:
now i exited maps,
cleared the counters and logs
i turned off a-gps.
enabled only integrated gps and network based.
i open maps,
the same thing is happening as with the assisted gps on, except i connected to my home wlan once, in the middle of connecting to at&t internet 10 or so times.
everything else is happening the same.
test 3:
i exited maps,
cleared the counters and logs.
enabled only integrated gps.
i open maps, and there is no evidence of packet data connection, or wlan connection.
nothing is showing up in the logs or packet counters, and there is no pink circle around where i may be.
if i set maps to go online, w/ my wlan as the access point, or at&t internet, their respective icons show up on maps, as well as the phone's home screen.
the phone's log show respective connections are made but w/ 0.0kb, and the phone's packet counter, as well as the maps kb usage, say 0.0kb.
test 4:
set maps to offline, w/ my wlan as access point.
exited maps,
turned phone off for a bit to test gps from cold start.
turned on phone,
cleared counters/logs,
enabled only assisted gps and integrated gps.
open maps, there's no pink circle around where i may be, just the red dot of where it thought i last was.
there's about 4-5kb of data transfer,
then i bring the phone to the window where there's a lot of clear sky, and my location is found pretty fast.
i know that w/o assisted gps, w/ only integrated gps, it takes a while to get the gps signals.
i went back and forth to/from the window, and there was packet data use again only once more, not continuously like w/ network based positioning.
so to conclude my tests,
setting the maps to be offline, still uses a-gps and network based positioning.
network based uses a more data, continuously,
which is the opposite of what i thought, i thought a-gps would use more, so i was using network based on and a-gps off while in canada. whoops.
using assisted gps uses about 5-10kb, which, when roaming, according to at&t, they charge 1.95cents/kb.
might be worthwhile for getting a quick gps signal, nothing worse than waiting forever for it to connect.
the only way to be completely clear of data use is disable network based and assisted gps, or set the phone to offline mode.

A-GPS: This uses information from cell network to get a rough idea of where you are. It then uses this information to figure out which satellites to look for. Result is a faster satellite lock. So A-GPS uses a few kB of data to get an initial position, but navigation is done using GPS satellites, which does not require ANY data connection.
Network based: This uses information from the cell network to plot the current position when GPS satellite signal is not available, ie indoors, in a tunnel, etc. Position info derived from the cell network is not as accurate as that from GPS satellites, but serves as a stopgap until GPS signal can be re-acquired. Network based positioning used your data connection EACH TIME the satellite lock is lost. So the amount of data used is dependent on the quality of access you have to the GPS satellites. If you don't lose the connection to the GPS satellites, then you won't use any data.
The ‘offline’ option within the Nokia Maps app only refers to street, POI, etc searches, NOT to A-GPS, Network based positioning or to connecting with the GPS satellites.
If you want to navigate without using ANY data connection, set A-GPS off AND set Network based positioning off AND set the Internet option in Nokia Maps to Offline. Do this and you will not use any of your data connection allowance when navigating. There is no need to put the phone into flight mode.
If I've helped you, you can thank me by clicking the green 'kudos' star on my post. Cheers.

When I try to use FaceTime on my Macbook Air, I try to verify the email I want people to call me with, and it says verified, but soon an message comes up that says "Could not verify the email address. Please check your network connection and try again."

So our school lets us use Macbook Airs for the school year, and it has facetime on it. I know facetime isn't blocked because like everyone else is using it. So I decide to give it a try. I click the icon, it says enter your apple ID. I dont have one, so I click to make one, and do so. I then enter my apple ID and click next. The screen reads "People will call you using your email address. What email address would you like to use?" I enter my email address in the box below the message, and then go to my email and click the link, and sign in, thus verifying the email. I go back to the facetime window, and click next. At the top it says Verified, but when I click next it doesn't go on to the next step, it simply blacks out the next button so that I can not click it, and after a few minutes a message comes up that says "Could not verify the email address. Please check your network connection and try again."
So that is the issue, please help!!!!!
*Note-I repeat that I know it is not blocked by the school because everyone else uses it just fine.*

Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear and the setup menu says there is an error. Any idea of what is happening?

I am trying to setup my new time capsule but it is not working. after entering the airport utility and locating the TC, after I tell the program to continue, the unit just disappear from the menu and the setup menu says there is an error. I tried using the wireless connection, and also the cable, but none worked. Any idea of what could be happening?

What are you setting it up as.. join wireless network .. the very worst setup, it will disappear.. reboot the whole network in order modem. router TC.. clients and it will likely reappear.
Tell us what network setup you are using..
If you setup with cable to a computer completely isolated from the network with TC also isolated.. finish the setup of everything you want. .before update.. then plug it into the network. .then restart everything in correct order.. it will work most of the time.

Network Shares and Missing Files on Windows 2000

Music files are stored on a Windows Server in a shared folder. iTunes 5.0 is installed on a laptop. Using the advanced preferences the iTunes Music folder location is changed to:
Desktop --> My Network Places --> Music
The folder location changes to:
C:\Documents and Settings\User\Nethood\Music
instead of:
\\ServerName\Music
When updating a podcast, a file is downloaded and can be played, but it is not stored on the server. A search on the local drive will not find anything -- HOWEVER IT IS THERE. Using the command prompt the file can be seen at:
C:\Documents and Settings\User\Nethood\Music\Podcasts\Podcaster\Filename.mp3.
This is confusing behavior to have a file that's supposed to be stored on a server end up in a hidden file on your local drive.
RESOLUTION: Created a mapped network drive and used that for the iTunes Music folder location.

Without more information about what you've already tried and how you're networked together, I can only suggest that while in the Finder on your Mac, select Go --> Connect to Server... and enter something like "smb://ipAddress" where ipAddress is the IP address of your Windows computer.
If your computers are on a network where you have a home router, verify that they can both access the Internet. If so, they should be able to communicate with each other.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.4)

Mobile stolen and I want to turn off the device and locate it

heelp me :
Mobile stolen and I want to turn off the device and locate it

If you set up the Find My iPhone service prior to your iPhone going missing, then there is a chance that can be tracked, though it depends on a number of factors: the iPhone is turned on, connected to either the 3G or a WiFi network, or has not had the Find My iPhone service disabled or the iPhone been completely restored. Log into icloud.com and go to the Find My iPhone section. If you did not set up Find My iPhone, check with your cell carrier. Some carriers offer their own tracking service, though you usually have to sign up when you still have the phone and have to pay for the service.
If your carrier does not offer such a service and you did not set up Find My iPhone, then there is no way to track the unit. Notify the police and your cell carrier, and change any passwords for any online accounts you may have used from your iPhone (the iTunes Store, for instance).
Regards.

PowerPoint - Present Online - Error starting online presentation - Cannot connect to this service. Check your network connection and try again.

"Present Online
Error starting online presentation
Cannot connect to this service. Check your network connection and try again."
On March 31, we starting experiencing this issue across our entire domain. We have not made any changes to our network configuration. We are using the same ISP, routing hardware, computer hardware, software versions and group policy settings as we were on March
30.
The issue appears to be related to network connectivity.
Here is what I have found so far:
We have three networks in our building and two ISPs.
Network-A uses ISP-A and is affected by the issue. Network-A is our corporate domain.
Network-B uses ISP-B and is affected by the issue.
Network-C uses ISP-B and is not affected by the issue.
If I take a Network-A domain member and launch PowerPoint while connected to Network-A and ISP-A I am unable to upload PowerPoint presentations.
If I connect the same computer to Network-C, the issue persists.
If I close PowerPoint, connect to Network-C, and reopen PowerPoint while connected to Network-C, I am able to upload presentations.
A non-domain computer is affected by the issue if PowerPoint is opened while connected to Network-A or Network-B, but unaffected if PowerPoint is launched while connected to Network-C. Again, in this scenario, switching connections while PowerPoint is open
has no effect.
The issue appears to be caused during PowerPoint start-up and not while attempting to share a document.
Microsoft is either unwilling or unable to find a resolution and has finally resorted to simply ignoring my calls, voicemails, emails, and ticket requests regarding this issue. Any suggestions would be greatly appreciated.
Here is a brief description of our configuration and what I have tried so far.
Windows Installer Version 5.0.7601.18493
OS Details Microsoft Windows 7 Enterprise , SP 1, Version: 6.1.7601, Codepage: 1252, Country Code: 1, Language: 1033, System Type: x64-based PC
Microsoft Office 365 ProPlus - en-us
ProductVersion 15.0.4701.1002
License Family: OfficeO365ProPlusR_Subscription1
License Status: 1 - LICENSED
Intel Core i3
4GB DDR
ISP-A => 100mb fiber
ISP-B => 30/50mbps down / 3/5mbps up cable
Clearing the internet cache
Clearing the OneDrive cache
Adding all related office.live URLs to trusted sites
Selecting lowest security settings for trusted sites
Changing permissions on the .ppt file to allow full permissions to everyone
Creating a blank PowerPoint presentation
Changing the location of the .ppt file to the local drive's user folder
Upgrading Office
Repairing Office
Downgrading Office
Installing Skype (Microsoft recommendation)
Leaving the domain
Rebooting the routers and switches on Network-A
Rebooting the router on Network-B
Upgrading the firmware for the router on Network-B
Disabling the firewall on Network-B
Enabling the firewall on Network-C(in an attempt to induce the problem)

The problem seems to have fixed itself, the computer may just have needed to be restarted.

HT3939 I bought a new iPhone5s A1533 but I didn't see LTE or 4G even I on 4G or go to best network area and same place note 3 shows LTE

I bought a new iPhone5s A1533 but I didn't see LTE or 4G even I on 4G or go to best network area and same place note 3 shows LTE very good
<Email Edited by Host>

Hello john1bettercom,
I can't think of many purchases these days that would be more exciting than a new tablet, especially were I to be going on a much anticipated vacation like you did. I can only imagine your disappointment when the tablet developed unsolvable problems at the very beginning of your trip.
We do our best to ensure that our customers are aware of our Return & Exchange Promise by publishing it in our stores, on our receipts, and on our website. With that said, I'd like to see what options may exist for you in consultation with your local store. At what store location did you attempt to make your return? Do you recall the name of the manager to whom you spoke?
In addition, I recommend that you contact Microsoft about your Surface Pro 3. As the manufacturer of the product, they should be able to present options for service under the factory warranty.
I look forward to hearing from you and am grateful that you took the time to write to us.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

SNP Network Heuristic and Location Heuristic

Similar Messages

Maybe you are looking for