SNP Planning Book Capacity Data View Issue

Hi Friends,
In my SNP Planing Books Capcity Data View the total of Production Qty is not matching when I expand the Product wise view for Week 22 2011. Can some one help me to identify why this is happening?
Production Total Qty shown is 29618 but when I view Product Details it totals only 24650 but Total line shows 29618.

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

Similar Messages

Purchase requisition date in SNP planning book and product view not in sync

Hello Experts,
We have an issue with display of purchase requisition date in SNP planning book.
We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
Additionally, this is the same date on which daylight saving time comes into effect.
Kindly advise if anyone has faced similar situation earlier.
Many thanks,
Aditi

Hi Aditi,
Check the time zone that you have in your location in ECC and APO.
Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
Different time zones should generate this kind of inconsistencies.
Kind Regards,
Mariano

SNP Planning book - Period Information Setting Issue

Dear All,
In SNP Planning book we have issue related to "Period Information" for
the buckets. The period labelling is not working properly.
Actually when we go to the SNP planning book and change the Period
Information Settings(refer attachment). Once Period Setting is changed,
it gets changed to all the users(globally). So it is behaving as if it is not
user specific settings.
Scenario is - Suppose I changed the Period information in SNP Planning
book to appear in particular format, and when other users goto SNP
Planning book their Period Information Setting gets automatically
set to the same format which was I changed to, and vice-versa.
FYI - We do not have - Use-Exit implemented for Period Setting.
Appreciate any input in this regard.
Thank you
Satish Waghmare

Hi Pawan
Thanks for the reply.
Here is what SAP has to say, this is as per reply to my OSS message.
Question- The period information settings cannot be
made user-specific; there is no customization possible. right?
SAP Says-------> Regarding the period information settings, there is really no
customization to achieve the result, unfortunately.
Question- When you goto Design of the Planning Book, inside the Dataview Tab,
Period Labelling field shows value as "A", However F4 drop-down list do
not contain u201CAu201D value for the selection. Only possible values in F4 drop-
down list are Blank, U, Z, B and E. Could you please clarify this?
SAP Says -
> Regarding the period labeling values, the 'A' value is blank in the
selection because you can also leave it blank for the system to use the
'standard labeling' option.
Sharing it for for everyone's benefit.
Thank you
Satish.

SNP Planning book capacity view -APO Product is blank in drill down

Hi Experts,
I am getting product blank when I am doing Header on/off drill down setting. Even when I am choosing Products from Display dependent objects, It drill down the second grid (Quantity View) and product is blank.
Please let me know if anybody faced the same issue before. We are using version SCM 5.1
Thanks & regards,
Hitesh

Hi,
In the standard SNP planning area 9ASNP02, the relevant KF in Capacity view is 9ACASUP .
There may be a conflict identified between selection and key figures to be read.
You can choose a different selection condition or change to a different data view, and check if ti comes out correctly.
Regards
Datta

APO SNP Planning Book Show Product View alternative UoM

Hi,
I have a base UoM of BTL and an alternative UoM of CAS.
I can change/save in my users settings the in transactions /SAPAPO/RRP3 (Product View) and /SAPAPO/SDP94 (Planning Book) to show the alternative UoM CAS as default.
The problem I have is when I enter the Planning Book, load a product, right click on the product (in Selected Objects), select Show Product View and then look at the stock tab, this always shows as the base UoM BTL. Can this be saved to show the alternative UoM CAS?

Hi Linda,
Try changing you user settings for a product in RRP3 Screen.
Page Menu --> Settings -->General Tab -->General Panel -->enter AUOM value (CAS in your case).
Note - The conversion only takes place for the products, for which the alternative unit of measure entered is also entered as the alternative unit of measure in the product master, or for the products, for which the base unit of measure has the same dimension as the alternative unit of measure.
Caution: Test it , how its affecting for other products which doesnt have CAS as AUOM.
All products which have BUOM as BTL will be changed to CAS when AUOM is maintained for them in product master.
Thanks
Vinoth

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

Key figure Explaination in SNP planning books 9ASNP94

Dear Experts ,
I am curious to know regarding SNP planning books key figures
when i am exploring sap standard Planning book
9ASNP94
Data view : SNP94(1)
I can able to see many KEY FIGURES Please refer below
I AM NOT SURE how they are used in planning , i mean what is clear definition of those key figures and i see some key figures are grey out and some or open for entry
how to find those detail information
when i go to T code SDP84 - define planning book
i can able to see those descrption and infocubes but not sure how to understand clearly , would be more thankful if some give me a clear explaination of it
Forecast     TXT
Sales Order     TXT
Distribution Demand (Planned)     TXT
Distribution Demand (Confirmed)     TXT
DistrDemand (TLB-Confirmed)     TXT
Dependent Demand     TXT
Total Demand     TXT
Distribution Receipt (Planned)     TXT
Distribution Receipt (Confirmed)     TXT
Distribution Receipt (TLB-Confirmed)     TXT
In Transit     TXT
Production (Planned)     TXT
Production (Confirmed)     TXT
Manufacture of Co-Products     TXT
Total Receipts     TXT
Stock on Hand     TXT
Supply Shortage     TXT
Safety Stock     TXT
Reorder Point     TXT
Target Days´ Supply     D
Target Stock Level     TXT
Days´ Supply     D
ATD Receipts     TXT
ATD Issues     TXT
Many thanks & Regards
Raj

Hi
Please find below the short summary of each key figures.
Forecast TXT :- FCST which has been released from APO DP to APO SNP
Sales Order TXT :- Sales order transferred from ECC to APO via CIF.
Distribution Demand (Planned) TXT :- Dependent demand coming from other location to this location for same product. Network planning
Distribution Demand (Confirmed) TXT :- In case deployment , we confirm the Distribution Demand (Planned) will appear her.
DistrDemand (TLB-Confirmed) TXT :- Mainly used in case of TLB.
Dependent Demand TXT :- Dependent demand coming from parent product in case of BOM
Total Demand TXT :- The sum of all above demands is called as Total Demand.
Distribution Receipt (Planned) TXT :- SNP created Purchase req will appear in this key figure.
Distribution Receipt (Confirmed) TXT :- In case of deployment Distribution Receipt (Planned) will be get confirmed in the Distribution Receipt (Confirmed) key figure.
Distribution Receipt (TLB-Confirmed) TXT :- Mainly used in case of TLB.
In Transit TXT :- In will contain the in transit stock which will transfer for ECC via CIF.
Production (Planned) TXT :- Planned order will get created via SNP in case of domestic mfg.
Production (Confirmed) TXT :- In case of SNP deployment Production (Planned) will be get confirmed in the Production (Confirmed)) key figure.
Total Receipts TXT :- Total of all the receipt elements as been used.
Stock on Hand TXT :- Stock has transferred from ECC or R3 via CIF.
Supply Shortage TXT :- This will be calculated with macro based on total demand and total receipt.
Safety Stock TXT :- Based on SNP master data, safety stock will get calculated during planning run.
Reorder Point TXT :- Based on SNP master data, Reorder Point will get calculated during planning run. . There are different methods of calculating safety stock.
Target Days´ Supply D :- The safety stock defined in number of days appears based on SNP master data in APO.
Target Stock Level TXT :- Get calculated by macro based on Target Days´ Supply D and total demand in future.
ATD Receipts TXT :- Mainly used for Deployment.
ATD Issues TXT :- Mainly used for Deployment
If you require any specific information for any key figure please do let me know.
I hope this will be useful for you.
Thanks
Amol

Data available in RRP3 view but not coming in SNP planning book

Hi All,
I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
I ran LC Cons check, PA cons check, OM17, but still the same result.
Any pointer would be highly valuable.
Regards,
Manotosh Bhattacharya

Hi
If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
Regards
Ian

SNP Planning Book not showing Bucket Capacity

Hi,
I have a process in which for some materials subcontracting is required and this subcontractors are managed under SNP. We define the capacity of subcontractor in numbers. Bucket Capacity is defined in the Master Data of Resource of this subcontractors and it is not getting viewed in the planning book.
Can some one help me why it is not in Planning Book.

Hi,
Please run the planning area consistancy check and try the same with SNP planning book.Also check the live cahe version of the resource.Ignore if you already have done all these steps.
Also check the UOM of the bucket resource and the planning area UoM.
Hope this can help.
regards,
kaushik

Read data from SNP planning book

Hi Frnds,
We are faced with a situation in which we need to read certain key figures such as PIR's, Goods Issue from SNP Planning book.
We tried using BAPI "BAPI_PBSRVAPS_GETDETAIL" to retreive data. But it seems that we are giving wrong input data to the BAPI. Could you please let us know what to be fed into the BAPI in simple terms? If there is any example code for the same , would be very much appreciable.
Orelse if there is some other way to retreive this data kindly suggest us accordingly...
Many thanks in advance.
Regards,
Karthick

Hi Karthick,
The parameters for calling BAPI_PBSRVAPS_GETDETAIL really depends on your Planning Area and Planning Book configurations. The planning book configuration will limit what Characteristics and Key Figures will you be able to read using BAPI_PBSRVAPS_GETDETAIL. Let me give you an example.
Assumptions: The planning book is configured as follows:
Name = ZPB1
Data view = DV1
The DV1 data view contains the characteristics 9AMATNR and ZCNTRY and Key Figures ZKF1 and ZKF2.
Assuming also that we have the following data currently in livecache:
9AMATNR-ZCNTRY-ZKF1-ZKF2
000001234-PH       - 143 - 567
000007891-PH       - 245 - 782
000007891-US       - 124 - 890
Let's further assume that you want the data aggregated to country level (e.g. char ZCNTRY), you have 1 planning version 'ZPAV1' and you only want the data for Country=PH, then here are the parameters that you need to pass to BAPI_PBSRVAPS_GETDETAIL:
PLANNINGBOOK = 'ZPB1'
DATA_VIEW = 'DV1'
SELECTION = 9AVERSION I EQ ZPAV1, ZCNTRY I EQ 'PH'
GROUP_BY = 'ZCNTRY'
KEY_FIGURE_SELECTION = ZKF1, ZKF2
Hope this helps. Please post again if you have any questions. I can give you sample code if you can post your email address.
Message was edited by:
        Emmanuel Nepomuceno (added planning version to selection)

SNP Planned order START date should be displayed in DATA VIEW

Hello Guru's
I have a very complex requirement. It is as follows
We are using heuristics and capacity leveling for our requirement. We generally see the planned orders in the SNP view but here additional requirement is that we have to see the start date of the production planned in the date view, ie the client would like to know when the actual production starts and wants to see the quantity produced on the first day in the date view.
In capacity view,we can observe the resource load which is the start date of the production planned, this load is in percentage now do i related that into quanitity and even if we do related that percentage in quantity then how do i see it the SNP data view plan.

Hi Sriuppa,
you can use receipts view /sapapo/rrp4 transaction where you can see receipts. This transactions offers you the selection based on product,source,target,dates,resource and you will get the list of orders.
Secondly ,if you right click in the receipts cell,select display details,it will show you order details at the bottom of the data view.
Please let me know if it helps
Thanks
Amit

The "Details All" view in the SNP planning book is not sorted

The "Details All" view in the SNP planning book should be sorted by Product Description in ascending order.
When all products in the selection ID are loaded into the SNP planning book, and then "Details All" is selected from the Header area, the product description list is not sorted in ascending order.
However when I load small number of products the issue does not occur they get sorted correctly by product description.
Is this hapenning due to standard functionality/Standard macro in Planning book?
Please let me know if anybody has faced this kind of issue earlier.
Edited by: Rohit Arun Bhosale on Jul 5, 2010 1:05 PM

Hi Rohit,
If you are using Detail All drill down then you wonu2019t get any option for sort as it will load all codes from the selection in the planning book and sorting will be based on product IDs.
but if you drill down from header on detail all -filter, even if you sort the display list there using ascending/descending button for Description, the list that you will get in the planning book after load will be based on the Product IDs agian.
I hope this is controlled from the selection we do in planning book where we select Location/Product, but if your planning is better driven by the description then you can remove the Product ID selection from header setting and have only description in drill down.
Regards,
Digambar

Capacity Consumption in SNP planning book

Hello,
Can anyone explain what drives the calculation of capacity consumption KF in the planning book.
Here is the example.
1) I have a Resource whose SNP bucket capacity of 90,000/Hr = 450000/Wk
2) I created a PP/DS PPM for one product from ECC and then converted it to a SNP PPM
3) There was no resource assignment in the SNP PPM. I then manaully assigned the resource (in step 1) to the PPM.
4) The material consumption on the SNP PPM is 37 per HR
5) The variable bucket consumption on the resource within the SNP PPM is 1 per hr.
Now I created a planned order of 4440 for the finished product in the SNP planning book manually (behind the scenes the heuristic run was carried out obviously).
On my capacity view, the values i see are:
Available capacity = 450000/Week (which is clear since its 90,000 * 5 days/week)
Capacity Conusmption = 6845
Resource capacity level in % = 1.521 (which is 6845/450000 * 100).
The only question is how is the Capacity Conusmption value populated by a value of 6845?
Please provide me your input gurus.
Thx,
Vishy
The idea is to create oneresource and assign it to multiple SNP PPMs so that the capacity situation on this resource for various products could be analysed.)

DEAR GURUS,
*There is a question regarding the resoucre consumptions relevant to PDS in SNP,*
****The inputs are:****
****1) Base Qty= 7700 TH****
****2) Set Up =45 MIN****
****Resource consumed by operation activity is 112 207 seconds = 31,17 hours.****
****Unfortunately we didnu2019t understand how this figure is calculated.****
****Can you please help us in this****

Unit Of Measure Conversion in the SNP Planning Book

I have a problem in (a copy of ) the standard SNP Planning Book 9ASNP94.
I often need to view data in different units of measure however, but would like to avoid having to set up multiple Planning Areas. I know how to change the Unit Of Measure on my User Settings and for specific Selection IDs however, the conversions only ever work for a single Location/Product combination. As soon as I select 2 Products, the Key Figures all revert back to the Planning Area UoM.
Is there anyway round this or do I have to create new Planning Areas? If so, what are the issues in running multiple Planning Areas - does this cause performance problems?

Hi
My feeling is when you do conversion on aggregated level(multiple products), if any of the product has UOM missing then you coversion fails on aggregted level.
It looks strange that UOM conversion looks fine when you do conversion on each product.
I suggest you to check whether the UOMs (that you want to convert)are updated correctly on each product on their repective location in the product master under UOM tab.
regards
Vijaya.

How to create a custom Button in a SNP planning book

Hi Experts,
I created my own Planning Book and Dataview in SNP with 3 Key Figures: KF1, KF2, KF3. Now I want to create one my own button with Macro so that when I press that button, the Macro will run to calculate: KF3 = KF1 + KF2.
I know that I can drag this Macro to one of default events like: Default, Level Change, Start. But actually, I want to create my own button so that I can handle the event as I want.
My question are:
1. How to create a custom button on the toolbar of SNP Planning book and writing macro for the button?
2. Please give me any document, material teaching about writing macro and relating to my above scenario.
Thanks very much!
Duyennx
Edited by: xuanduyen on Sep 6, 2011 9:20 AM

Hi,
Access the transaction "/n/sapapo/advm". In the list select your planning book/ data view and click 'Start Macro Builder' button.
In the Macro builder screen, drag and drop your macro from Macro depot to the work area.
Right click on your macro name and select 'properties'. In the pop up, next to the Assigned Push button field, there is a button 'Choose'. Click that. It will display all the available icons. In standard system, it displays more than 1000 icon. Choose any one icon which is suitable for your macro function. Close the pop up and save the macro. This will assign a push button to your macro.
In the Planning book tool bar, you can see the selected icon in the header tool bar. Just by clicking that icon, you can execute the macro interactively.
And I don't know whether we can include/design our own icon. But there are already 1000+ standard icons to choose.
Regards,
Manimaran M.

SNP Planning Book Capacity Data View Issue

Similar Messages

Maybe you are looking for