SNP Planning Book not showing Bucket Capacity

Hi,
I have a process in which for some materials subcontracting is required and this subcontractors are managed under SNP. We define the capacity of subcontractor in numbers. Bucket Capacity is defined in the Master Data of Resource of this subcontractors and it is not getting viewed in the planning book.
Can some one help me why it is not in Planning Book.

Hi,
Please run the planning area consistancy check and try the same with SNP planning book.Also check the live cahe version of the resource.Ignore if you already have done all these steps.
Also check the UOM of the bucket resource and the planning area UoM.
Hope this can help.
regards,
kaushik

Similar Messages

SNP Planned order not following resource bucket capacity/factory calendar

Hi gurus,
SCM 5.0
I am running SNP heuristics for a product and expecting planned orders for it. It has corresponding production data structure and multimixed resource. The resource has an assignd factory calendar and SNP bucket capacity. The bucket capactiy availablity dates of the resouce is consistent with the factory calendar workdays/holidays. Using simple lot for lot strategy, I am expecting heuristics to schedule the planned orders on the dates of the demand in compliance with teh SNP bucket capacity availability of the resource. APO does not schedule on holidays consistent with bucket capactiy. This is true until...
We have a public holiday in factory calendar that needs to become a workday. To remedy this, we put a special rule for the factory calendar and explicitly made that holiday into a workday. The changes were synchronized with APO, and this is also reflected in the bucket capacity of the resourc: former holiday now has bucket capacity after the calendar change. However, when running heuristics, it still does not create SNP planned order on that former holiday that has been changed into workday. Even if it is a public holiday, there is already a special rule for the factory calendar and the resource bucket capacity reflects this correctly. But SNP heuristics seems not to follow this change.
Any ideas on this? looks like a bug.

Hi Edgar,
Yes, when your resource reflects the addional capacity of the holiday turned working day, then it is expected to be considered for the SNP planned order.
Instead of SNP heuristics, you may try to check interactively in SNP planning book, if manual order creation in the bucket works out.
Since this is a mutlimix resource , it can also be checked if in PPDS planned order can be created on the day.
The above checking may not solve your problem , but will get to know if at least manully the bucket is being considered or not.
regards
Datta

SNP - Planning Book/Data View not showing up in /SAPAPO/SNP94

Hi All:
I created a planning Book out of a custom SNP planning area. While I could see the Planning Book in the list of Planning Book in the /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) I could not see the custom planning book in /SAPAPO/SDP94 - Interactive Supply Network Planning (all Books) . I could ony see the SAP supplied PB there. Will SDP94 transaction display only the standard SNP Planning book? How can I make sure that the custom PB is displaed in /SAPAPO/SDP94?
pl. help
Thanks
Ryan

Hi Narayanan,
a couple of simple checks..
can you please check that you have not set a filter critera in the shuffler in planning book/data view?
you can also check if by mistake only a limited number of users are assigned to this planning book and data view ?
else you may want to check note : , 327371
Let me if this helps.
Rgds, Sandeep

Capacity Consumption in SNP planning book

Hello,
Can anyone explain what drives the calculation of capacity consumption KF in the planning book.
Here is the example.
1) I have a Resource whose SNP bucket capacity of 90,000/Hr = 450000/Wk
2) I created a PP/DS PPM for one product from ECC and then converted it to a SNP PPM
3) There was no resource assignment in the SNP PPM. I then manaully assigned the resource (in step 1) to the PPM.
4) The material consumption on the SNP PPM is 37 per HR
5) The variable bucket consumption on the resource within the SNP PPM is 1 per hr.
Now I created a planned order of 4440 for the finished product in the SNP planning book manually (behind the scenes the heuristic run was carried out obviously).
On my capacity view, the values i see are:
Available capacity = 450000/Week (which is clear since its 90,000 * 5 days/week)
Capacity Conusmption = 6845
Resource capacity level in % = 1.521 (which is 6845/450000 * 100).
The only question is how is the Capacity Conusmption value populated by a value of 6845?
Please provide me your input gurus.
Thx,
Vishy
The idea is to create oneresource and assign it to multiple SNP PPMs so that the capacity situation on this resource for various products could be analysed.)

DEAR GURUS,
*There is a question regarding the resoucre consumptions relevant to PDS in SNP,*
****The inputs are:****
****1) Base Qty= 7700 TH****
****2) Set Up =45 MIN****
****Resource consumed by operation activity is 112 207 seconds = 31,17 hours.****
****Unfortunately we didnu2019t understand how this figure is calculated.****
****Can you please help us in this****

Show Sales orders, STOs, & Deliveires in SNP planning book by Shipping Poin

We are using ECC 6.0 and SCM 7.0.
We have a requirement to model the Shipping point as a location in SNP. By this functionality we want to show Sales orders, STOs, & Deliveires in SNP planning book by Shipping Point in addition to Delivering Plant which is default now.
When I create Sales Orders in ECC system always perform shipping point determination and passon to APO per schedule line via CIF. These Sales Orders always show up in SNP under delivering plant/location. We also want to show them under Shipping Point location.
Here is what I have done so far:
1. I have created a CIF integration model for all required shipping points and CIFed over to APO. These locations are showing up in SNP planning book.
2. I have created Sales Orders and verified the shipping points are determined correctly and sent Sales Orders to APO successfully.
3. I see all the Sales Orders in SNP planning book at delivering plant/location.
4. But I don't see any sales orders under shipping point. They also don't show in RRP3 screen.
5. If I create a forecast in RRP3 at Shipping Point location they show-up in SNP planning book at Shipping point location.
Any idea how to model shipping points in SNP for planning?

check what the ATP order type is of these orders are (from RRP3)
then check what ATP group these order types are assigned to (from SPRO)
then in the SNP Planning are make sure the Keyfigure you want to see them in refers to the ATP group from above
Which planning book are you using? Is it a standard book/ copy of a standard book? What KF are you expecting to see it under... the standard book has KF for planned production that will be same as your PPDS planned orders

Demand on VC material not visible in SNP planning book

Hi Experts,
Is there any way to plan VC (Variant Configuration ) materials in SNP at the group level ?
I will explain the scenario more in details below
I have an VC material say X. Material X has end product Y attached to it (material variant). When material X is cifed to APO, it appears as configurable product in APO & is a top level product. Now when I create a demand on material X through DP, the demand appears in product view (RRP3). However the demand does not appear in the SNP planning book nor it gets selected during background planning run. The system is configured as Variant Configuration & not CDP.
Is it possible to plan material X in SNP ? If possible how can the demand be read in SNP ?
Thanks in advance
Regards
Sandeep

Hi Sandeep,
One of the limitations of Characteristics Based Forecasting is, CBF results can only be used in PPDS and not in SNP, hence it is not possible to plan that material X in SNP. Even though you use MC90 transaction which is release DP to SNP, but the data will not be available in SNP
That material X will be planned only in PPDS, there are two ways to plan, those are
1. one way is by releasing CBF results to active version using MC90 transaction, during this release, you should maintain consumption group in release settings and in product master, in this case you have to use Forecast Check/Allocation check as a part of ATP/GATP, here you can not use CTP or MATP
2.the other way is by releasing CBF results to inactive version using MC90 transaction, during this release you should not define consumption groups, generate the dependent requirements in inactive verison using heuristics in PPDS , and convert dependent requirements from inactive version to Forecast - active version using /SAPAPO/DMP2 transaction, in this case you can use MATP/CTP as a part of GATP
-Deepak

Process orders not reflecting in SNP planning book

Hi,
I am facing a problem here that the SNP planned orders once converted into process orders in ECC are not reflecting in the SNP planning book.
However if i check the /sapapo/rrp3 product view, the process orders are visible here.
Kindly help me understand if i am missing out something here.
Thanks,
Nalin

Hi,
Please Check whether the ATP category is assigned to the Category group which is assigned to KF in the planning.
If that is assigned rightly then run TS cons check.
Regards,
Kishore Reddy.

APO SNP Planning Book Show Product View alternative UoM

Hi,
I have a base UoM of BTL and an alternative UoM of CAS.
I can change/save in my users settings the in transactions /SAPAPO/RRP3 (Product View) and /SAPAPO/SDP94 (Planning Book) to show the alternative UoM CAS as default.
The problem I have is when I enter the Planning Book, load a product, right click on the product (in Selected Objects), select Show Product View and then look at the stock tab, this always shows as the base UoM BTL. Can this be saved to show the alternative UoM CAS?

Hi Linda,
Try changing you user settings for a product in RRP3 Screen.
Page Menu --> Settings -->General Tab -->General Panel -->enter AUOM value (CAS in your case).
Note - The conversion only takes place for the products, for which the alternative unit of measure entered is also entered as the alternative unit of measure in the product master, or for the products, for which the base unit of measure has the same dimension as the alternative unit of measure.
Caution: Test it , how its affecting for other products which doesnt have CAS as AUOM.
All products which have BUOM as BTL will be changed to CAS when AUOM is maintained for them in product master.
Thanks
Vinoth

Purchase requisition date in SNP planning book and product view not in sync

Hello Experts,
We have an issue with display of purchase requisition date in SNP planning book.
We are manually entering the PR's for a perticular week from Monday - Sunday(01.09.2014- 07.09.2014), when the last PR is entered on 07.09.2014, it does not appear on the same day in planning book(cell becomes empty) and moves to 06.09.2014, thus quantity on 06.09.2014 is the summation of the quantities present on 06th and 07th.
The PR dates are appearing correct when we click on display details in planning book and they are correct in product view, MD04 as well.
Additionally, this is the same date on which daylight saving time comes into effect.
Kindly advise if anyone has faced similar situation earlier.
Many thanks,
Aditi

Hi Aditi,
Check the time zone that you have in your location in ECC and APO.
Also note it is recommended that you maintain the same system time zone in APO and in ECC. (check tcode STZAC in both systems).
Different time zones should generate this kind of inconsistencies.
Kind Regards,
Mariano

The "Details All" view in the SNP planning book is not sorted

The "Details All" view in the SNP planning book should be sorted by Product Description in ascending order.
When all products in the selection ID are loaded into the SNP planning book, and then "Details All" is selected from the Header area, the product description list is not sorted in ascending order.
However when I load small number of products the issue does not occur they get sorted correctly by product description.
Is this hapenning due to standard functionality/Standard macro in Planning book?
Please let me know if anybody has faced this kind of issue earlier.
Edited by: Rohit Arun Bhosale on Jul 5, 2010 1:05 PM

Hi Rohit,
If you are using Detail All drill down then you wonu2019t get any option for sort as it will load all codes from the selection in the planning book and sorting will be based on product IDs.
but if you drill down from header on detail all -filter, even if you sort the display list there using ascending/descending button for Description, the list that you will get in the planning book after load will be based on the Product IDs agian.
I hope this is controlled from the selection we do in planning book where we select Location/Product, but if your planning is better driven by the description then you can remove the Product ID selection from header setting and have only description in drill down.
Regards,
Digambar

Stock not in SNP Planning Book

Hi
We are doing a global implementation and we have seen the issue where stock exists in live cache, and is correctly considered in SNP Heuristics, but the stock on hand is not displayed in the SNP planning book.
This is NOT an issue with the stock category, as the same stock category is displayed for Poland and the UK locations.
This is leading me to think this might be a time zone issue?
What possible reasons can people think of where stock of the CC category is in live cache but not displayed in the SNP planning book. But another plant location is performing correctly for CC stock.
S SB

I have answered my own issue. The stock on hand macro is initial stock + Receipts - Demands.
Deployment is running in the evening and pushing out the stock, the day rolls over to the next day and then the deployment STR demand is considered history and as per the above formula is netting off the stock.
This is a symptom of running the SNP run in the evening, not at 00.01am. (Deployment STRs of stock are instantly in the past) which then affects the stock on hand balance.
Hope that is clear to anyone else having this issue.
Simon.

Data available in RRP3 view but not coming in SNP planning book

Hi All,
I am facing an issue in SNP book. I can see forecasts in RRP3 view. But when I load the same data in SNP planning book, the forecasts are not coming there (forecast KF)
I ran LC Cons check, PA cons check, OM17, but still the same result.
Any pointer would be highly valuable.
Regards,
Manotosh Bhattacharya

Hi
If you look at the standard Forecast KF 9ADFCST in your planning area, it is usually assigned the Category Group of DF1. This category group only contains the category FA for forecast. If you create Forecast in /SAPAPO/RRP3, this will create Additional Forecast or category group FC. Therefore any forecast generated this way will not appear against the standard planning book KF.
So you have two choices, if your forecast is only FC category then use the KF 9AAFCST Forecast (Addittional) in your data view or create a new Category Group with both FA and FC assigned to it and then assign this Categotry Group to 9ADFCST in your planning area.
Regards
Ian

How can you block production for a specific product in SNP planning book

Hi All,
Looking for a way to manually indicate a decision to prevent production in a specific cell for a product in the SNP planning book utilizing the supply planning and capacity leveling heuristics. For this requirement the resource would have available capacity during that time period. It also could plan other products in that time period. The requirement is for a planner to manually go into the planning book to somehow indicate that the heuristic should not consider that time period as available for a specific product, while still leaving the resource available for other products.
Has anyone run into this before? Any experience on how to stop a heurisitc from considering a specific time bucket for a specific product as available for orders?
Thanks
-Mike

Hello Mike,
I haven't tried it yet myself but I kow that there is the option in the Planning Book to manually fix several periods for a specific location product. This will prevent the heuristic from planning these periods for the specified product. For details please have a look in the Online Help for SNP under key word "Order Fixing".
regards
Christian

SNP Planning book - Period Information Setting Issue

Dear All,
In SNP Planning book we have issue related to "Period Information" for
the buckets. The period labelling is not working properly.
Actually when we go to the SNP planning book and change the Period
Information Settings(refer attachment). Once Period Setting is changed,
it gets changed to all the users(globally). So it is behaving as if it is not
user specific settings.
Scenario is - Suppose I changed the Period information in SNP Planning
book to appear in particular format, and when other users goto SNP
Planning book their Period Information Setting gets automatically
set to the same format which was I changed to, and vice-versa.
FYI - We do not have - Use-Exit implemented for Period Setting.
Appreciate any input in this regard.
Thank you
Satish Waghmare

Hi Pawan
Thanks for the reply.
Here is what SAP has to say, this is as per reply to my OSS message.
Question- The period information settings cannot be
made user-specific; there is no customization possible. right?
SAP Says-------> Regarding the period information settings, there is really no
customization to achieve the result, unfortunately.
Question- When you goto Design of the Planning Book, inside the Dataview Tab,
Period Labelling field shows value as "A", However F4 drop-down list do
not contain u201CAu201D value for the selection. Only possible values in F4 drop-
down list are Blank, U, Z, B and E. Could you please clarify this?
SAP Says -
> Regarding the period labeling values, the 'A' value is blank in the
selection because you can also leave it blank for the system to use the
'standard labeling' option.
Sharing it for for everyone's benefit.
Thank you
Satish.

Meaning of CONDET key figure in standard 9ASNP94 APO SNP planning book

I am trying to clarify the use and meaning of the CONDET (capacity consumption details) key figure in the SAP standard SNP planning book 9ASNP94.
Any advice appreciated...

Hi Frank,
This indeed is practical requirement wih no simple solution ( at least we did not find).
We created a background job for deletion of the stocks ( which were updated through IDOCs like your situation) at specific periodicity. The jobs were made as per planners with specific variants and when planner would like to delete the stocks, the job will be run.
Another option could to be copy the standard program /SAPAPO/RLCDELETE to a module program and check validation at the input screen, before calling the deletion program.
Regards
Datta

SNP Planning Book not showing Bucket Capacity

Similar Messages

Maybe you are looking for