SNP PPM Generation from PPDS PPM - Time less than 1 sec. in snp bucket con

Dear All,
Request immediate help .
(a) My PPDS PPM have time elements less than 1 seconds towards processing time and there are operations without a set up time .
(b) While converting such a PPM PPM into an SNP PPM I get an error of bucket consumption as SNP cannot convert less than 1 second into a daily bucket .
(c) I have to maintain the base qty in BOM and Routing as 1 unit hence cannot increase the same .
(d) Is there a way in which SNP PPM can be generated from a PPDS PPM wherein the PPDS PPM has only a processing time of 1 second and no set up time .
(e) Infact I have tried to convert the PPDS PPM with a time of 1.5 seconds but now I have lot of products where the routing suggests a processing of less than 1second and no set up . This is leading to a PPDS PPM of time less than 1 second and SNP PPM is not getting generated as guess it cannot convert a PPDS PPM with less than 1.5 seconds in a day .
Would appreciate a quick response .
Thanks and Best Regards ,
Prashant Kumar

Hi
Firstly, can I ask why the base unit has to be 1, this seems a strange restriction?
If it has to be, then two possible solutions:
1) In the CIF enhancement CIFPPM01 you could multiply all values by, for example, 100 to give you larger values in the PP/DS PPM in APO and hence of a size that SNP conversion can cope with.
2) In one of the BADI's /sapapo/ppm_calc or /sapapo/ppm_gen you can do the same conversion factor if the PP/DS PPM has to also be 1 unit.
Hope this helps
Ian

Similar Messages

  • FM to get the time less than 15min

    Hi ,
    Is there any FM to get the time less than 15 min?
    Regards,
    Arun.

    Hi Arun,
    COPF_DETERMINE_DURATION is FM to calculate difference between two dates and times.
    Regards,
    Soundarya.

  • SQL Server Agent Job Scheduler- Set time less than 10 seconds

    Hi,
    Could any one please let me know how to change the SQL server agent Job scheduler time to less than 10 secs?
    I wan to schedule a SSIS package run for every 5 secs.
    Thanks..

    Be careful, it is a bad idea to blindly just issue a new package run without knowing whether the previous package ended.
    It may lead to locking/dead-locking.
    Now re the Agent: the seconds are not exposed at all, why you say 10?
    But, there is a way, not through the UI, explained there:http://stackoverflow.com/questions/5569415/is-there-a-way-to-set-a-sql-server-job-scheduled-to-run-every-30-seconds + http://www.sqlservercentral.com/articles/Administration/sqlserverjobscheduling/2288/
    PS you can have it every sec
    Arthur My Blog

  • Times less than 1.00 pm

    Hello!
    In a programm there are times give like:
    2:34 pm
    11:130 am
    7:00 pm
    9:40 pm
    Required are all the times less than 1.00 pm.
    How can I say that in Abap now ?
    Regards
    Ilhan

    data:
    w_date like sy-datum.
    if w_date lt 01:00:00.
    write " Time is less ".
    else.
    write " Time is more ".
    endif.
    Regards,
    Pavan

  • I bought a new Iphone 5 Friday the battery goes flat in less than half a day also the wifi disconnects in less than 40 secs

    I bought a new Iphone 5 Friday the battery goes flat in less than half a day also the wifi disconnects in less than 40 secs this is really frustrating I think I have a dud phone or is this the new IOS6.1 software update?

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as NEW device.  If you've been through ALL the steps listed and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible replacement.

  • TS1365 MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS already replaced MLB, problem still persist.. please help thanks in advance

    MacBook Pro (15-inch, Late 2011) It turns on for less than 60 sec thens shutsoff by itself, it won't load to recovery hd partition, won't load to mac OS and already replaced with new MLB, but the problem still persist.. able to run ASD EFI but ASD OS wont work.please help thanks in advance

    Holy crap, I got it to work.
    Essentially, I just waited until DiskWarrior reached Step 9 and told it to skip the step before it had a chance to freeze. It skipped successfully, moved on, rebuilt and replaced the faulty directory files.
    So far the computer is booting like normal, I can log in, and I'm currently copying all of the data to an external as I type this.
    I still have no idea why the computer wouldn't mount or boot to any drive, but I guess I'll deal with that later.

  • Opening second tab, no address causes download speed to drop from 160 kbs to less than 5 kbs and sits there doing nothing, does not happen with IE, why is this

    after firefox updated from 27 to 28, when i download a file, play music, watch a video, or run a speed test, normal speed is about 160 kb/s (dsl connection 1.3 Mb/s) - just opening another blank tab (not any address) or try to open another page like google search page, download speed drops to less than 5 kb/s - downloading stops, and second page does not open, why is this happening, it does not happen with internet explorer and the version of IE i have is out of date,
    history/cookies all clear automatically when close, i have disabled all add on, run malware, adware searches - show no problem, norton antivirus is up to date, i have spent hours on phone with ATT isp and connection is showing no problem - if i run a speed test it shows good, if i try to run a speed test and open second tab - speed fails and speed test will not even finish, ATT suggested I try the same thing in IE and there is no problem - so it appears to be an issue with Firefox 28

    What is the CPU load when this slowdown happens?
    Are you using a specific driver in Windows to mange the internet connection that might not get enough processor time to run properly?
    It is also possible that other (security) isn't able to do its work and takes additional CPU time.
    Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if that helps.
    *http://www.bleepingcomputer.com/tutorials/how-to-start-windows-in-safe-mode/
    You can try to create a new profile as a test to check if your current profile is causing the problem if starting Firefox in Safe Mode didn't help.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Broadband speed dropped from 2 meg to less than di...

    Hi everyone this is my first post, I am looking for some help / advice with an ongoing speed issue I have just joined BT broadband, my equipment setup is a D-Link 320 modem set in bridge mode to a cisco/Linksys E4200 router as they suit my need I only use the internet for surfing maybe the odd song / app from itunes plus online gaming through XBox live, when I first set everything up on 1/7/2011 I was getting a healthy 2,5 meg the max that my line is capable of getting, I did a another BT speed test on 3/7/2011 results below as you can see things have gone very wrong and I am getting less than dial up speed very frustrating. 
     Download speedachieved during the test was - 420 Kbps
     For your connection, the acceptable range of speeds is 50-500 Kbps.
     Additional Information:
     Your DSL Connection Rate :608 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 500 Kbps
    9/7/2011  I did another speed test today at 13:00 hour results below
     Download speedachieved during the test was - 410 Kbps
     For your connection, the acceptable range of speeds is 50-500 Kbps.
     Additional Information:
     Your DSL Connection Rate :608 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 500 Kbps
    It has been 9 days now my equipment has been left on 24/7 but as you can see nothing has changed I know about the 10 day training period for things to settle down etc but surely I should have seen some improved by now i.e. my ip profile increasing a little 
    As I pulled 2,5 meg when I first set everything up does that mean my line is ok and should of stabilised by now or has my line been capped for some unknown reason  
    any help or advice is appreciated  
    many thanks 
    Solved!
    Go to Solution.

    hi yea Iv just a quiet line test and everything seems fine no noise.
    I forgot to explain my equipment is connected upstairs using an ADSL approved extension cable that I bought from the BT shop as well as an I,plate, but I had the same issue with my last provider and I connected direct to the BT socket downstairs and I have been having the same issue this is why I changed to BT. Hear are the router states from last provider these were taken on 17/6/2011  
    ADSLValues
    DescriptionThomson Livebox 2 Mini uk v7.1-h323
    ManufacturerThomson
    SerialNumber0812GH0WD3678CP
    HardwareVersionT-E.1.0
    SoftwareVersion6.3.9.6
    DestinationAddressPVC: 0/38
    ModulationTypeADSL_G.dmt
    ATMEncapsulationVCMUX
    ModemFirmwareVersionbcm96358_ADSL_PHY_A2pBT009c1.d17d
    StatusUp
    LinkStatusUp
    LinkType PPPoA
    DataPathInterleave
    UpstreamAttenuation275
    DownstreamAttenuation500
    UpstreamNoiseMargin190
    DownstreamNoiseMargin79
    UpstreamMaxRate1040000
    DownstreamMaxRate736
    UpstreamCurrRate448
    DownstreamCurrRate608
    UpstreamPower121
    DownstreamPower148
    UpTime902134
    Stats.Total.Values
    LinkRetrain3
    FECErrors187816
    ATUCFECErrors0
    HECErrors61
    ATUCHECErrors0
    CRCErrors163
    ATUCCRCErrors0

  • 'Processing Event...' iMac takes ages, MacBook Pro less than 1 sec! What?

    I have an iMac and MacBook Pro of similar spec and vintage (2-3 years old) and use iMovie daily for work - editing skydiving footage. We need videos done FAST, and herein lies the problem..
    When importing new footage from the cameras (ContourHD) and then opening iMovie, the iMac takes a long time 'Processing Event' while doing exactly the same action with the MacBook Pro 'Processing Event' either takes a split second or doesn't even happen, iMovie just opens with the new Event just sitting there - no processing required.
    What is going on! It has been like this in all the versions of iMovie. We also have a new 27" iMac and this behaves like the other iMac, ie, takes a while (several minutes to Process Event).
    Is there something that we have missed in Preferences in the iMac's? I cannot find any difference between the computers, in fact the MacBook Pro was rebuilt in the image of one of the iMac's from it's Time Machine backup. Also the Pro has half the RAM of the iMacs.
    Any ideas?

    Yes on the iMac, no on the Pro. Uninstalled it off the iMac - no difference.
    I might point out that the Pro sometimes does take a while 'creating thumbnails - processing event' so might investigate this further. It might be that the videos were first downloaded onto the iMac where the thumbnails were created then copied to the Pro afterwards for further editing. I'll check it out.

  • Deadline in a period of time less than a minute

    Hi there,
    we're implementing a BPM where there is a time-dependent loop. We used the deadline branch in a block step, that setp is ok, but there is a problem.
    We need a maximum deadline about half a minute, but the deadline unit parameter won't accept seconds, just minutes or longer time units.
    We had thought of using a fork step where the 2nd branch would be nothing but a transformation step and a control step. The transformation step would countain a mapping where I could implement a java code with a wait method of a determined delay (this is needed because the wait step also only suports time units up to minutes). When this wait was completed, the control step would throw a timeout exception and terminate the block (thus the loop).
    But there are some gaps in this approach:
    1. the process start trigger is located in the receiver step, which is inside the loop, in the first branch of the fork. How to start the 2nd branch of the fork (the wait branch)?
    I had thought of creating a new message interface of a simple datatype to use as a trigger for the wait branch. After the receiver in the main loop of the 1st branch of the fork, I'd put a send step which would send a message of this type to the BPM itself. Then, I'd put a receiver step in the 2nd branch of the fork before the transformation step, just to start the branch. To guarantee that only one start message would be sent, the send block inside the main loop could be put into a switch step, and I could create a flag as simple type container which would be flagged false (hence not running the send step anymore) once the trigger send step ran for the first time. Would this work?
    2. Is it really possible to use the mapping in this sense?
    Is there a less drastic way of performing this wait step with seconds unit?
    Thanks in advance.

    > Go to properties of the Fork step and make the
    > necessary branches to be 2.
    You make like this, and let it execute 2 Fork Branches, but before executing the steps inside the Fork Branch, you can use Switch condition, so that is some data/id exists then only go to the fork branch, otehrwise don't do anything.
    Did u see the option of the Message Based loop. If not it will help you on this entire scenario. But you need to have one stop message from the Source, stating that , this is the last message.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/0e/56373f7853494fe10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/08/16163ff8519a06e10000000a114084/frameset.htm
    Hope this helps,
    Regards,
    Moorthy

  • RS232 speed on CVI5.5 10 times less than in CVI4.0.0

    When I use CVI5.5 for create an application for reading from RS232,I see average time per byte about 60
    milliseconds. This is very slow.
    Then I run this project under the CVI4.0 (NOT standalone)and see average
    time about 5.0 milli seconds.
    The application is very simple - only reading bytes from com-port and put it to Standart I/O and checking
    keyboard input.
    Disabling Standart I/O output can't solve problem.

    Such a great difference looks strange to me: I never saw those figures.
    If you run a project in the 5.5 IDE environment, the debug features are all active, unless you set in the project window Build >> Configuration >> Release.
    Up to 5.0 version the corresponding option was in Options >> Run options menu, and could be set to 'None'.
    Check in your project if this option is turned on or off (remember that when you compile a project, it is automatically set to 'None'): such a different configuration (5.5 WITH debugging and 4.0 without) could perhaps explain the graeat difference in performance.
    Hope this helps
    Roberto
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

  • Repeating event appears one time less than requested

    I've created an event for the first of each month. I want this event to occur each month from April through October, a total of 7 months. When I create this event, I select it to repeat every month and end after 7 times. But, when I do this the last event occurs in September. For it to occur all 7 times, I have to have it end after 8 times. Seems strange. Am I doing something wrong?

    I have the same problem.
    It occurred after we changed to summertime in Norway.
    The time for reoccuring events displays correct on my Mac but one hour wrong on my Ipod
    I even have support for time zones turned on for my Ical on the Mac.
    The problem is may be that I can not choose Europe/Oslo as timezone on my Ipod but has to use Paris as a surrogate.
    Who knows. But I find it a bit frustrating to retype every reoccuring events to get them right.
    Imagine an Apple product that are unable to sync correct with another Apple product.
    Seems weird to me.
    Hope the folks at Apple with fix this soon.

  • How can I get a refund from my iCloud purchase less than 24hrs ago

    I purchased the iCloud 20gb extra storage yesterday, and after quickly realising it did not meet my needs & deleted my icloud account , shortly after i received a conformation mail from apple that my bank account has been debited £28.00 I have spent the whole evening going round in circles unable to get the message through that I require a refund into my account.

    Apple have made this as difficult as possible. If you use Express Lane you cannot proceed without entering a hardware serial number which is still eligible for AppleCare. However julia22 managed to find a way round it - please see this post:
    https://discussions.apple.com/message/16968425#16968425
    it gives the USA number - if you don't live there you will have to find an equivalent number from the 'Contact Us' link at bottom right of this page.

  • Recently a course was hidden from iTunes U because less than 75% of material available.  I checked and all of the apps and information is available. How do I fix this?

    I checked all of the apps and materials and they are available to download from the app store or the course.  How do I get this course added back into our iTunes U site?
    Thanks,
    Nancy

    Nancy;
    To "Unhide" a Collection, you can highlight the hidden Collection and choose "Unhide" from the Collections Page menu (see attached). 
    Hope this helps...
    Syd Rodocker
    SRVideo Media Design
    Apple iTunes U Administrator
    Tennessee's Electronic Learning Center

  • Infinity dropped from 25Mbps down to less than 1Mb...

    As advised I am opening a new thread for this.
    I have had infinity for a month or so and at first the speed was fine. But since xmas it has seemed to get slower and slower. I have run just run the speed test results below. It is worse than the worst I ever got from normal broadband. What am I paying a premium for ?
    As advised I will turn off and on the modem and do nthe test again. Will post the results when I have them.
    Solved!
    Go to Solution.

    After rebboting the modem and openreach box have re-run the test and it seems ok now.

Maybe you are looking for