SNP resource overload alerts not appearing in Supply Chain Cockpit

I am using APO 5.1.
We use APO SNP for capacity planning, and can see various capacity overload alerts in the alert monitor.
But even though the Supply Chain Cockpit is linked to the correct alert profile, we do not see these alerts attached to the respective objects in the Supply Chain Cockpit.
Any ideas on why this should be?...

Hello,
If you want to use the Alert Monitor within the Supply Chain Cockpit (SCC) in SAP APO, you must assign application-specific alert profiles to your SCC user profile. In the upper right area of the SCC, you can see the existing alerts for the applications.
Please look into the below link for more information:
http://help.sap.com/saphelp_scm70/helpdata/en/47/f925c8852f383ce10000000a42189b/content.htm
Regards

Similar Messages

Selection Criteria in Supply Chain Cockpit

Hello,
Is it possible to add some selection Criteria to add object in the work area ? For example I would like to add the ABC indicator as selection criteria to load in my work area only Product that have a class A indicator.
Thanks for your help.
Laurent.

Hello,
If you want to use the Alert Monitor within the Supply Chain Cockpit (SCC) in SAP APO, you must assign application-specific alert profiles to your SCC user profile. In the upper right area of the SCC, you can see the existing alerts for the applications.
Please look into the below link for more information:
http://help.sap.com/saphelp_scm70/helpdata/en/47/f925c8852f383ce10000000a42189b/content.htm
Regards

Supply Chain Cockpit

Hi all,
can any one please explain me the purpose, working and application of the SCC in detail ???
Thanks a lot in advance,
PP

Hi PP,
The Supply Chain Cockpit (SCC) consists of a highly intuitive, graphical interface that acts as the top enterprise planning layer covering all planning areas such as manufacturing, demand, distribution, and transportation.
All employees in the Plan -> Source -> Make -> Deliver cycle of supply chain management can use it to their advantage
As the gateway to SAP APO, the SCC makes dealing with a vast supply chain easier and more manageable. SCC allows you to:
Create individual work areas so several planners can work simultaneously on different parts of a supply chain.
View the supply chain from all angles, down to the smallest detail, to minimize the complexity of the relationships among supply chain components.
Measure supply chain performance with KPIs (key performance indicators) that are stored in SAP Business Intelligence (SAP BI).
Respond immediately and accurately to new developments by tracking alert situations.
The SCC can be configured to suit conditions within a wide variety of industries and business situations.
For still more informations, please refer link
http://www.e-optimization.com/resources/uploads/ACF308.pdf
Regards
R. Senthil Mareeswaran.

The Shopping cart not appearing in the sourcing cockpit of the buyer

Hi
We are using Extended Classic Scenario. The SC was created in SRM and then after approval was send to a central buyer for sourcing. The central buyer redistributes the same to the respective Buyer based on the purchasing group. However the SC doesnt appear in the sourcing cockpit of the actual buyer and when I see the details of the SC item in BBP_PD, I see that the Sourcing Relevant Indicator is marked 'Y' which means Sourcing is already completed. But nowhere a supplier has been added to the SC by anyone and it also doesnt reflect in the BBP_PD.
Any idea how and why the indicator has the status 'Y' and how can I make the SC appear in the sourcing cockpit of the buyer.

Hi Manoj,
If the SC is directly converted into a P.O (either ordered / held status) please check the Sourcing settings in SPRO.
SPRO > IMG > SRM > SRM Server > Sourcing > Define sourcing for product categories
Check whether sourcing always carried out was maintained for the required product category. The P.O will get directly created in case the setting is " Sourcing never carried out".
Please check this and let me know if this is the case.
Rgds,
Teja

PDS are not displayed in supply chain model SCC07

Hi,
Does anyone know if it is possible to add PDS to supply chain model (transaction SCC07)? currently i don't see this option (we are not using IPPE in the ECC).

Hello,
You can not see PDS in SCC07. Note that PDS are not even part of the menu.
You can also see that the SAP Help does not mention PDS in the documentation of the Supply Chain Engineer (SCC07):
https://help.sap.com/saphelp_scm50/helpdata/en/4c/e1af376ed96c21e10000009b38f8cf/content.htm?frameset=/en/40/f5ae37fdcf3…
Kind Regards,
Mariano

E-mail notification alert not appearing

Hello,
I am running Thunderbird 24.4.0 on Windows 7. I am using no add-ons and I am only using a Gmail account with Thunderbird right now for testing.
I do not receive any new e-mail notifications. I did receive them once or twice before, but it is very random and rare when I do receive a new e-mail alert.
However when I maximize Thunderbird, it displays the new e-mail. So Thunderbird is indeed actually receiving the e-mail, it is just failing to notify me.
I have ensured notifications are enabled in the Menu Bar > Tools > Options.
I have tried using Add-ons such as:
https://addons.mozilla.org/en-us/thunderbird/addon/mailbox-alert/
https://addons.mozilla.org/en-us/thunderbird/addon/new-mail-attention/
Which also do not help display alerts. However the "new mail attention" add-on does blink the Thunderbird icon on the Windows taskbar, so at least something can notify me.
I have also tried running Thunderbird in safe mode, and running it in compatibility mode for Windows Vista, both also did not help. This appears to be a bug in Thunderbird, as I have noticed other users mentioning the same issue.

Thank you rsx11m, your suggestion seems to have fixed it! Yes I did have Gmail configured as an IMAP account. Much appreciated.

SOURCE_REL_IND : shopping cart not appearing in the sourcing cockpit

Gurus,
Few of the shopping carts after deleting the follow-on PO doesn't appear back in the sourcing cockpit. Furthermore, I found the SOURCE_REL_IND set to blank in table BBP_PDIGP.
Since this is happening at random, not sure if I can forcefully push the cart into the sourcing cockpit using any FM.
Thank you.
PS : I tried FM : BBP_PDIGP_DB_DIRECT_UPDATE, but the next run of BBP_GET_STATUS_2 is revoking it back to space.

Hello Ricardo
SUB:- CLASSIC SOURCING ...
assume that my buyer is incharge of the sc
1.requestor creates a sc and buyer also create a PO from the cockpit.
2. later business decides some thing wrong so buyer deletes the same PO
3. after status job the same sc why comes to cockpit. the same buyer should look each time the follow on docuemnts created or not?
4. what is the SAP stratergy here deleted PO taking to cockpit again
5. understand many customer has different taste.
6. if i were buyer which i really deleted the same PO , i dont want to see the the same sc again into cockpit.
sap has any flexible options ?
7. any customers reported to sap this is a problem or incidence.
i do have some incidents in sdn , 2 of them dont like this functionality
BBP_GET_STATUS _2 - Deleted PO's
deleted po not taken to the cockpit.
what is the sap sourcing stratergy describes this scenario ?
br
muthu

Shopping cart not appearing in users sourcing cockpit for completion

Hi
A user cannot see his shopping carts in his sourcing cockpit in his worklist. He finds them with the find tab but he cannot mark them as complete. The completion check box column is not there. However another colleague can find these shooping carts and the completiong column is there. Why this occur?
Does it have anything to do with where the user is placed in the org. struture? Please advise.
Kind regards

Hi,
seems that the requirement is assigned to a different Pgroup. Therefore one user does see it, and the other one not. When you adjust the assignment in the Org Model, the user will see the requirement.
Check the responsibility and assignment of your Pgroups.
Cheers,
Claudia

Shopping Cart not appearing in Sourcing Cockpit

Supplier Relationship Management -> SRM Server -> Sourcing -> Define Sourcing for Product Categories
In this config. we have maintained Sourcing as 3. sourcing carried out for items without Assd. source of supply also we tried with 2. Sourcing always carried out.
Yet the shopping cart does not appear in the sourcing cockpit .. a PR is created automatically and SOURCE_REL_IND is set to blank.
Is there any other config. that we are missing for cart to appear in sourcing cockpit.

Hi Saurav,
I had a similar problem and solved in the following way.
Please check the settings maintained in
Define Objects in Backend System (Purch. Reqs, Reservations, Purch. Orders)
- Remove the entries from this table.
- Recreate the entries from F4 Search Help only and do not type.
- Do not maintain wild Cards in two columns ( Purchasing Group or Material Group) At least one entry should exists.
- Test it again with creating new SC.
RBEI SRM/Ram

The Power Supply Fan is still working, but does not appear to respond to increased loads, and its speed cannot be increased using SMCFanControl. Any suggestions?

Hi all - My mac pro 1,1 has an enigmatic problem. It's quad-core, 3Ghz, running OS X 10.7.5. The problem began some months back, when running HD video conferences, HD streaming videos and some other graphics-moderate (I won't say intense) uses, such as slide shows in Just Looking. My machine has an ATY, RadeonX1900 card and 2 monitors - both Apple displays, one being 30 inch 2560x1600, the other being 24 inch 1920x1200.
When I start those types of graphics-moderate apps, after about 5 minutes, something would crash (the monitors making a noise as it did) and the displays would both go black. The power did not appear to be fully cut off from the monitors. I think that the underlying applications, however, did not crash. So, I could still hear and speak to people during video conferences, and I could hear the sound tracks of videos.
Attempts to restart the computer and get the monitors back did not immediately work to undo the problem, if done straight away. The only way to correct the problem (so as to have the monitors work) was to wait for a few minutes and then restart.
After a lot of puzzled looking at console logs (and I confess that I am not an expert), I ran into a blank.
But, because of the timing of the crashes (after ~5minutes use) and restarts (after some minutes wait), I reasoned that the problem might be temperature related.
Once on that path of thought, I found this article:
http://worldtv.com/blog/guides_tutorials/fixing_an_overheating_mac_pro_no_expens e_required.php
I installed both Temperature Monitor and SMCFanControl. And I experimented, and got interesting results:
Now to the puzzling bit: SMCFanControl shows that the speed of the Power Supply Fan doesn't vary much, even if I use SMCFanControl to ramp fan speeds right up. All of the other fans react to SMCFanControl, going up to and above 2500rpm when commanded. But the Power Supply Fan does not. Having watched it for a few days now, the Power Supply Fan, according to AFCFanControl, never varies outside of a range from about 600-640 rpm, regardless of what I do with AFCFanControl.
Also (and not surprisingly), whenever the graphics-moderate apps run, when I ramp all the fan speeds up using SMCFanControl, Temperature Monitor shows that the all of the temperatures within the machine plummet, except in the power supply locations. Power Supply Location 2 is the worst affected. Because the Power Supply Fan does not react as the other fans do, the "crashes" still occur.
I could post some screen shots of the read outs of SMCFanControl and Temperature Monitor, although I think I have covered the key points in this post.
It seems that the Power Supply Fan is still working, but does not respond to increased loads.
Instinctively, I'm worried that if that's right, it might be a hard problem to fix. Any suggestions? Help! I would really appreciate them!
Cheers
P

Thanks for your response Grant. I had already read about, and I think excluded, dust in graphics card/fan/assembly as a cause. The entire inside of the computer, including the graphics card/fan/assembly, is as clean as a whistle. It looks clean. I've cleaned the dust out every now and then (including a few days ago). Also, my undersanding (derived from the article, linked in my first post) is that I might expect to see high temperatures in the Northbridge and memory module B if the graphics card was overheating. According to Temperature Monitor, however, locations do not increase in temperature when I run the relevant apps. Finally, the graphics card/assembly does not feel too hot to touch.
It is strange that SMCFanControl lists the Power Supply Fan as being software controllable, if that fan is not. Still, your comments are consistent with my observations, as the fan simply does not respond to software control.
There are two upsides: First, I've something of a work-around. I've worked out what temperature must be achieved in Power Supply Location 2 for a crash to occur, and I can watch that location in Temperature Monitor, terminating the process before that treshold is reached. Of course, that's not ideal. Second, ramping all the other fans up does significantly delay the onset of the problem, and makes recovery time much quicker.
Is there any donwside to peridically ramping up the other fans when running the relevant apps? Given that it causes all of the other locations to cool significantly, could this lessesn the life expecancy of the mahcine? (I don't want to run the fans up all the time - that's like sitting next to a jet ready for take off!)
Also, a correction to my first post: Yesterday, with all the other fans running on full and running an HD streaming video, the Power Supply Fan did, eventually, slowly, come up to ~740rpm, which is much higher than the ~640rpm maximum I had previously seen, and this may have aided delaying the onset of the problem.
I'm not sure where this leaves me? The problem might now be able managed. Well, sort-of. But it's not eliminated.

MRS: PRT Tool Resource does not appear in Planning Board

Hi Experts,
I am trying to perform tool assignment but somehow the tool resource does not appear in the planning board. I have the following set up:
- Tool created as both material and Equipment (category P)
- Equipment assigned to work center linked to Org Unit
- Order with operations created with PRT assigned
What I am seeing in the planning board:
- I can see the operation with the linked PRT
- I can see the HR resource under the same work center Org Unit
- However, I cannot see the Tool resource.
Am I missing somethng here? Any kind of pointers would be greatly appreciated.
Thank you in advance,
Jk

Thank you for your response, Varun.
I do have the equipment work center set to be the same as the operation work center. Also, when I try to add the PRT manually in the planning board, I get 2 error messages:
"Resource is not available"
"Selected equipment 0 is invalid"
Have you encountered this before?
Thank and Regards,
jk

Supplying Plant field is not appearing in vendor creation of receving plant

Dear Friends,
Iam configuring Cross Company Scenario to my client for the version SAP 4.6C as they implemented a new company code and want to transport the material from one company code to another company code.
I made all the required customizations in the system
while creation a vendor code in the reciving plant in Pur.Org.Data screen->Extras--> Add.Pur.data i am unbale to view plant field where we maintail supplying plant
In OMSG at purchasing data at add purchasing data PLANT, vsr relevacne & plant relevance made optiional
but while creation of vedor code the other two VSR relevance and Plant relevance indicators are populating but the PLANT field is not appearing.
without this assignment while creating a STO, shipping data tab is not appearing
Please Provide me input in solving this error.
Thanks inadvance
Regards
Srini

Dear Srini Behara
The field selection is controled at Vendor accounting group.
For Vendor account group (std 0001) , the field Plant in additional Pur data is supressed whereas for accounting group 0007 this field is activated.
Please rfer the following path to activate the field
SPRO--> Financial accounting --> Account receible and Payable --> vendor accounts --> Master data --> Prepataions for creating vendor master data --> Define account groups with screen layout
Select the Vendor account group and go to Purchase org data and change the Plant filed option.
Or create teh Vendor under accounting group Plant (0007 std)
warm regards
Ramakrishna

Container values not appearing in alerts - SAP CRM 7.0

Hi Experts,
I have 2 issues:
1. I am calling an alert on lead creation by calling an action with processing type as TRIGGER ALERT.
The alert appears on the home page but the container values defined in the long text are not appearing. The containers defined are as follows:
OBJECT_ID - Object type - BUS2000108 - business transacton number
Call later date - Z field in CRMD_ORDERADM_H - structure - CRMD_ORDERADM_H - Field Zabcd
Please let me know if there is something i'm missing or if i need to define these values in the Method TRIGGER ALERT???
2. If i want to call this action on a particular date (call later date as above), is it possible to take the reference of this date in the start condition?
Regards
Nitin Sehgal

Dear Nitin,
The first I am not sure, so hopefully someone else can help you with that.
For the second, If you want a Z-field to be used in the action conditions, you should add an attribute to your BOR-object in SWO1.
How to do this can be found here.
[http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html|http://sapcrmweblog.blogspot.com/2011/01/adding-attributes-to-bor-object.html]
Hope it helps...
Regards,
Pieter Rijlaarsdam

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

I have iphone 4s 32GB ,the volume of the ringer and alerts can't be adjusted using the volume buttons and lock sounds and keyboard clicks available, but all not appear ??!!!!!!!

Hi nitramred,
To start troubleshooting this issue where you are unable to adjust the volume after receiving a call, please go ahead and first force close all of the apps currently running on the device, and then reset it by following the steps in the articles below.
iOS: Force an app to close
Turn your iOS device off and on (restart) and reset
Take care,
Alex H.

Messages only alert when received 1/4 of the time and do not appear in lock screen even though the ability to see them is turned on

I'm not notified at all 3/4 of the time that I have received a text message. How do I fix this?

Hey M0904,
I found the following information regarding troubleshooting notifications, I'd run through them and see if they resolve the issue:
iOS: Understanding Notifications
http://support.apple.com/kb/ht3576
Troubleshooting notifications
Push notifications require an active Wi-Fi or cellular connection. If you are not receiving notifications for a specific app, try these steps:
Verify that the app supports notifications.
After installing an app or restoring a backup to a different iOS device, open the app at least once to begin receiving notifications.
If the app requires entering or logging in to an account, you will need to do this before receiving notifications.
Check Settings > Notifications to ensure that the app is configured for notifications.
If notifications do not appear only in the Notification Center, verify that the Notification Center setting for the app is enabled.
If you are still unable to receive notifications and you are using a Wi-Fi connection, verify that the network or firewall is not blocking access to port 5223.
Have a good one,
David

SNP resource overload alerts not appearing in Supply Chain Cockpit

Similar Messages

Maybe you are looking for