SNRO: Number Range Intervals

Is it possible to use this functionality, I suppose with FM GET_NET_NUMBERS, with a number range that would have a character in its second position?
Thanks.

No.
The function module uses the table DFPM_NUMB's CURRENT_NUMBER field (Data type N) to add a number. So You cannot have a number generated with characters and numerals.
You will have to manually generate the number and concatenate a character to it.
Regards,
Subramanian

Similar Messages

  • Number range Intervals

    Hi!
    Where can I see the Number range Intervals for NR Object
    "Business Partner"  ?
    Bye
    Sas

    Hi,
    Please refer to the TCode SNRO.
    Thanks,
    Sriram Ponna.

  • Mass deletion of document number ranges intervals for several company codes

    Dear experts,
    We are running version ECC6 and are about to go-live a lot of company codes simultaneously. We would like to delete satndard number ranges intervals for these company codes.
    Is there a way to delete the number ranges intervals (which have not been used) for several company codes at the same time ? I'm looking for a transaction or a program similar to OBH1 (used for the creation of number ranges ).
    Thanks in advance for your help.
    Best Regards,
    Steven

    Hi
    I am also not aware of such T.code to delete number ranges for a company code.
    Alternatively, you can go to FBN1 in change intervals mode.
    From the Menu Select all and Press Shift + F2 (Delete interval).
    Ofcourse, this have to be done individually for each co. code.
    Regards

  • Transporting Number range Intervals

    Dear SRMers
    System Information: ECC 6.0,
    We created Z Number range objects in ECC system A and transported them to ECC System B.
    The custom objects were transported, but the number range intervals did not transport to the target system. My question is do we need to transport the number range intervals for the custom objects seperately?
    Points will be rewarded for answers.
    Thanks in advance,
    Best Regards,
    Bob

    Hi,
    Usually best practice is to not transport number range but to recreate it in the target system.
    However, technically it is possible.
    Kind regards,
    Yann

  • Changing the Number range intervals

    Hi Gurus,
    I have query on changing number range intervals in PA. Earlier number ranges has been set at the time of implementation and recently they added one more company and they ask me to set a number ranges for new employees with the new series.
    While inserting new number ranges for personnel number it is saying that transport need to be done manually, and it is giving the following message.
    *In the target system, all intervals*
    *of selected number range object are*
    *deleted first so that only the exported*
    *intervals exist after the import.*
    *The number statuses are imported with*
    *the value that they had when exported*
    *Dependent tables are not transported or*
    *converted.*
    If it delete first then export means will it affect the exisiting number in the productions system. Because already other employees are numbers are maintained in the same server it should get affected.
    Kindly clarify the same.

    Hi Sikindar,
    Thanks for the info,
    But the problem is in production client if i enter the transaction code PA04 it is giving a error as " you are not authorized to use transaction PA04"
    What should i do if it throw this kind of error. Even i am not able to use SPRO option in production server.
    Please help"
    Regards,
    Pradeep Krish

  • Transport Number range intervals

    Hi,
    I have created a custom number range with intervals (from & to number range values) i need to transport this to production and unit testing boxes. how to create a transport for this.
    and also it is advisable to transport number ranges?
    Thanks
    Sa_R

    Hi,
    Thanks for your reply.
    But my doubt is , the number range is newly created. have 250 subjects inside , User already maintained the intervals in the config box. So i need to transport this higher box. If i am transport this , whether all other number ranges get deleted? including SAP standard also?
    Thanks
    Sa_R

  • SNRO-Number range creation info req?

    Hi
    I need to create a no range for an object,can any one plz tell me how to do it?
    I had a ztable in MM,in whcih i need to have a unque no. w.r.t a plant if the GR is done for any material in that plant.
    How to do it.
    currently,the GR is done by the report,but when the report is run by 2 users for 2 diff mateiral,in a same plant,it generate a same no. & display to both of them,but only one record is stored in the ztable.so it need to be corrected.
    plz tell me teh way???
    regds

    a new snro-object will probably not solve your problem. as far as i understood your post, you are using a custom Z-abap to post GRs. check that abap on these things:
    how does it enqueue/dequeue objects it is currently handling?
    how does it get the next number from the existing object?

  • An error in cash jounal:For object CAJO_DOC2 AAA, number range interval 01

    hi
    whan i am doing an entry in cash journal(in cas receipts) and post when a massege coms here "For object CAJO_DOC2 AAA, number range interval 01 does not exist"
    can anybody help me and solve it.
    thanks

    HI,
    First Method
    Go to TCODE "SNRO"
    Give the Object as "CAJO_DOC2"
    Click on the "Number Ranges"
    Give the Company code
    Click on the Change Intervals.
    Mainatain number range 01 and save.
    Second method
    use path Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Define Number Range Intervals for Cash Journal Documents
    Or Tcode FBCJC1 to maintain number range intervals.
    An assumption to the above solution is that you have assigned the FI document type with which these documents should get posted with in the following path an dthe number range for that document type is alreday defined.
    Spro>FA(NEw)>Bank accounting>Business transactions>Cash Journal-->Set Up Cash Journal
    With adopting one of the above solutions you will be able to post the transactions.
    Reward points.
    Sarma

  • Number range Interval HU_VEKP

    Hi,
    I am a technical consultant and came across number range intervals for the first time. Need some help for you.
    I am trying to define packaging material types. One of the statements says that I to ensure that <b>the number assignment of your packing material types is set to the Number range interval</b> (NRI) ‘HU_VEKP’.
    I have defined 4 packaging material types for whom the number assignment starts from 0000 to 0003. I have the NRI 'HU_VEKP' in the SNRO transaction. How do I proceed further?
    Thanks & Regads,
    Rahul

    Use Tcode SNRO.
    Provide your object type HU_VEKP
    Then click on change button, it will take you to No. Range Object: Change screen.
    Then click on Number range in menu bar to maintain the number range.
    Hope it can assist you.
    Thanks & Regards
    JP

  • Regarding Number Ranges

    Hi Experts,
    I am New to ABAP.
    Can any one Help me in telling
    What is SRNO - Number Ranges T.Code?
    How to Create Number Ranges?
    How it is useful in SE11.
    If any one have Material Regarding this T.code Give to me.
    Thanks in advance.

    Hi,
    It is SNRO not SRNO..
    SNRO is the general transaction to maintain number ranges for business objects like accounting documents (FI), controlling documents (CO), sales orders (SD), etc.
    In addition, there are other transactions available to maintain application specific number ranges.
    For more details please refer to the SAP documentation:
    http://help.sap.com/saphelp_nw04/helpdata/en/1f/8310df4bc511d189750000e8322d00/content.htm
    To create number ranges..
    Go to SNRO and define the number range.
    To define a number range for shipment cost documents:
    1.go to SNRO and enter SD_FRACHT as the object and
    choose number range and select the number range intervals push button.
    2.Specify the number range from 01 0000001000 0000999999
    01 Indicates the internal number range.
    Means system generates the next available number based
    on the interval you specified.
    So you can generate the shipment cost document number
    starts from 1000 to 999999.
    Regards,
    Omkar.

  • T code KANK - Number Range for CO

    Dear experts,
    When I create CO number range(T code KANK) for a controlling area and do a posting, system takes last document number and therefore I can only post one document at a time.
    Example: When I creat number range 1 to 100 and try to do FI posting with a CO object, system will take number 100 as the first document and hence I have to extend the number range again and again. It is ignoring the number range 1 to 99.
    I get the message as 'Number interval for transaction COIN in CO area 2000 is exhausted'
    Any solution to this problem?
    Thank you.
    Regards
    Paul
    Edited by: Paul01 on Dec 12, 2010 8:12 PM

    Hi,
    Check this post as well.  You may find it useful
    CO Document Number range issue
    Since you gave CO number range from 1 to 100 and the buffer in SNRO for object RK_BELEG is 100,  you are not able to create any additional CO documents. 
    One solution is to make sure you give sufficient number range intervals in KANK in order to avoid this.
    Thanks
    Ram

  • Custom number range

    Hi All,
    When ever i create a service order,i want the system to give the number with the year and serial number.
    i.e lets say i am creating a service order in the year 2009 or 2010,then the number of the order should be
    92009001 , 92010001.
    9 should be unique to all service orders.
    Please let me know how do i achive this requirement.
    thanks
    Sam

    Hi Sam
    Try this:
    Tcode: SNRO
    Object: CRM_SERVIC
    There is a checkbox for "To-year flag" which has the following help text:
    Flag, whether number range object is to-year relevant
    ID determining whether the number range intervals are distinguished according to To-fiscals.
    Hopefully this flag might give you an option to select the validity of your number range. Also you'll need a 10 digit number range since your format 92009001 will only allow you 999 service orders in one year.
    Hope this helps
    Rupesh

  • How to create Number Range

    Hi All Sap Experts
    Please tell me How to create Number Range
    I tried with the Transaction Code " SNRO "
    But Im getting The following error
    Dialog box title : " Buffering Methods ".
    Message in the Dialog box is :
       -Numbers may be lost!
       -Do not use for Financial accounting Documents!!
    ?. Do you want set this Buffering method?
    And another error is :
    Dialog box title : " Transport number range intervals "
    Message in the Dialog box is :
         The number range intervals are not included in automatic customizing changes.
         Transport all changes made within range interval maintenance must be  
         triggered manually.
         In the initial screen for range interval maintenance function
    <b>      Interval</b>              -->      <b>Transport</b>
         Please note the information that you get when transporting intervals.
    So please tell me the solution for this error.
    Thank you
    Basu
    Another is

    hi,
    Create number range object using OYSN.
    Then call the following function modules.
    FORM get_next_id CHANGING p_discrep.
      DATA: last_id LIKE zrecaudit-discrep,
            quant   LIKE inri-quantity,    "dummy
            code    LIKE inri-returncode.  "returncode
      CALL FUNCTION 'NUMBER_RANGE_ENQUEUE'
           EXPORTING
                object           = 'ZRECAUDIT'
           EXCEPTIONS
                foreign_lock     = 1
                object_not_found = 2
                system_failure   = 3
                OTHERS           = 4.
      IF sy-subrc = 0.
        CALL FUNCTION 'NUMBER_GET_NEXT'
             EXPORTING
                  nr_range_nr             = '01'
                  object                  = 'ZRECAUDIT'
             IMPORTING
                  number                  = last_id
                  quantity                = quant
                  returncode              = code
             EXCEPTIONS
                  interval_not_found      = 1
                  number_range_not_intern = 2
                  object_not_found        = 3
                  quantity_is_0           = 4
                  quantity_is_not_1       = 5
                  interval_overflow       = 6
                  buffer_overflow         = 7
                  OTHERS                  = 8.
        CALL FUNCTION 'NUMBER_RANGE_DEQUEUE'
             EXPORTING
                  object           = 'ZRECAUDIT'
             EXCEPTIONS
                  object_not_found = 1
                  OTHERS           = 2.
      ENDIF.
    ENDFORM.                    " get_next_id
    <u><i><b>refer the links</b></i></u>
    http://www.sap-img.com/ge003.htm
    http://www.sap-basis-abap.com/sapmm009.htm
    http://www.erpgenie.com/abap/code/abap33.htm
    http://www.kabai.com/abaps/z26.htm
    Rgds
    Anversha

  • Number Range Edit

    Hi,
    In My PRD system client setting is No Chnages Allowed and No Chnages to Repository &...
    Yet also COnsultants are able to edit number range intervals thru SNRO.Is this client setting independent?I checkd that S_NUMBER object is responsible for this.So does this client setting anyway come into picture for this specific Tcode.
    Regards,
    Mofizur

    Hi Prashant,
    Point 1 and Point 2 are OK.
    For last point status is like this:::
    Namespace/name range                      Modifiable
    Customer name range                              Not modifiable     
    General SAP name range                           Not modifiable     
    Country Version India                            Not modifiable     
    Country Version India                            Not modifiable    
    Regards,
    Mofizur

  • Number range does not exist error message while releasing billing document

    Hi,
    We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval  does not exist FBN1".  Note : System does not specify which number range is missing...
    There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
    Regards,
    Sakthy

    Hi,
    I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
    I hope this will make sense.
    Panneer

Maybe you are looking for

  • Crystal Report Viewer navigation slow in ASP

    Hi all, We have a simple asp page that is rendering a report in a crystal report viewer.  We are using the using the default parameter panel for parameter selection, and are setting the db credentials in the report document, see code below.  Two thin

  • I have only a few clips that need to be up resed

    I read the Ken Stone article on working in low res, but in order to up-res, you have to create an entire offline sequence. I only have a few clips that were captured at OfflineRT (photo jpeg), I cut them in to a full-res sequence, now how do I select

  • Can we call another transaction from the Userexit

    Hi all,         Can we call another transaction from the Userexit? Thanks, Balaji

  • Can anything be done about this?

    I have noticed lately an alarming increase in the number of posts with signatures including much private information that has to be later removed. In my ignorance, I tend to associate this with the increasing numbre of people posting from their mobil

  • Flash Packager personalised data in

    Hi, Is there a method that allows me to get personalised info into an app. I have a client that would like to send "alerts" to specific customers who allow this service, so that when user opens app a message will appear saying your delivery is due et