Snyc Centro via WiFi
Does anyone know if it's possible to sync the centro via Bluetooth, or WiFi?
Post relates to:
Yes, I know!
BlueTooth, yes. Wifi no.
Wyrenut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Similar Messages
-
How to HotSync a TX to Vista64 or Win7 via Wifi.
Here's how to HotSync to Vista 64bit (Vista Home Premium) and Windows7 64bit via Wifi with a TX using Palm Desktop 6.2:
1. Install Palm Desktop 6.2, open the HotSync Manager (little Hotsync icon in the Tool Tray) and choose "Connections". Select "Network" and uncheck "USB".
2. Determine your Vista computer's IP address on your network. This can be found by going to Start Button/All Programs/Accessories/Command Prompt. A DOS window will now open. Type the following ipconfig /all (there is a space between the g and the /). A lot of data will pop up. On my Vista laptop, my IP address is listed as "IpV4 Address - 192.168.x.xxx" (Your computer may display it differently.) Write this address down, then close the DOS window.
3. Now go to your TX. Turn on Wifi and connect to your router. Open the HotSync icon. Be sure the word "Network" is highlighted over the large Hotsync button in the center, and below it says "Tap to Select PC". If Network is highlighted and you don't see "Tap to Select PC", then open the Options pull-down menu (in top left corner of the Hotsync program on the TX) and select "Modem Sync Prefs". Be sure "Network" is selected. Also check "LANSync Prefs" and be sure "LANSync" is selected. Click OK, and now you should see the "Tap to Select PC".
4. Tap the box to Select PC, and the Network HotSync Setup screen will open and ask you to tap "Next". Most likely, the next step will fail (I've never seen it find a computer!). Tap the "Other" button at the bottom to enter your PC's IP address. (You can try entering the name of the computer on the network, but I've had better success with entering the IP address first. It will then find the name after a successful HotSync.)
5. Enter the IP address you wrote down in step #2 above, then tap Next. Tap Done on the next screen that says "Network Hotsync Setup is complete".
6. Back at the Hotsync screen, tap the big Hotsync icon in the center and hold on! Your computer should recognize it and start to Hotsync.
Optional: If you are familiar with router settings, I'd highly suggest you set "Static IP's" (or sometimes called "Reservations" ) for both your Palm TX and the PC you're syncing with. It will make things much more reliable.
Hope this helps!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!ccbusse wrote:
These directions are excellent! However, I am receiving an error message "Network(TCP/IP) connectin failed to initialize (Error startint TCP listen)" when I try to and check the Netork(TCP/IP) box in the HotSync Manager under connections. I tried to use the help button in HotSync Manager. From what I can tell the reason I am receiving this message is due to the fact that I have never synced to my new computer (I can't sync using the USB cable due to the Vista 64-bit operating system). Do you know of any solutions to this problem? Thanks.
Post relates to: Palm TX
Strangely enough, I have seen this error message once or twice when I've powered on my laptop after a normal shutdown! I've closed the error message, and things worked fine.
I'd suggest making sure you have admin priviledges, and turned off UAC in the Control Panel for your User account. I've yet to have a Hotsync failure using this method. Just works every time!
As a suggestion, give your computer a Static IP on your network, as well as your TX. It will make everything work faster and more reliably. If you installed Palm Desktop with UAC active, it may be necessary to uninstall/reinstall with it dead to get things to work correctly.
Good luck!
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
IPhone no longer connects to iTunes via Wifi
On July 1,12 my iTunes did an automatic update. After the computer restarting and I entered iTunes and the following messages appeared:
Message 1: Must reinstall itunes to connect to ipod or mobile devices.
Message 2: CD/DVD folder must be located in itunes folder in order to use with itunes
I have 2 iphones (both 4s, bought at same time, both running iOS 5.1.1)and one will briefly connect to itunes via Wifi (I will identify this one as iphone1) but the other one will not (I will identify this one as iphone2). I have a PC with Windows 7.
When iphone1 is connected to itunes via wifi is disconnects randomly. Under: Summary > Version, it has the message: Connect this iphone using a USB cable in order to update or restore its software. When I have it connected with the USB cable, there are no problems. The settings selected under: Summary > Options > are: Open iTunes when this iphone is connected, Sync with this iphone over Wi-Fi, & Manually manage music and videos. The Setting under Backup > Back up to this computer (where it backs up to; I do not know)
iphone2 does not connect via Wifi but used to. It connects without issues with the USB. The Settings in iTunes > Summary are the same as iphone2 except that iphone2 is set as Backup > Back up to iCloud.
My iphone2 is my primary device. I use it exclusively; for music, taking photos, syncing photos to my Photo Stream folder on my PC, etc. The iphone1 is my spouse's secondary phone, so its not used as often (ie: only has 4 songs downloaded, used to take the odd picture, has a mirror image of apps from iphone2).
I searched Apple Support and tried the following solutions that didn't solve this problem:
How to restart the Apple Mobile Device Service (AMDS) on Windows (support.apple.com/kb/TS1567) &
Set the Apple Mobile Device Service Startup type to Automatic
I have not done this: Remove and reinstall iTunes and AMDS. I did goto the: iTunes for Windows: Device Connectivity Tests > iOS > iPhone - iTunes Troubleshooting Assistantand into iTunes > Help > Run Diagnostics. The results were: All tests passed. (My iphone2 was plugged in with USB. The iphone1 was connected via WiFi.)
What do I do now? Do I need to remove and reinstall iTunes? and if so will I lose all my itunes info (videos, music, apps, settings) or will it just show up after I install iTunes?Hi Mitch,
It sounds like you have already done many of the steps, but I would like you to look at this article -
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
and go over any that you may have missed.
Thanks for using Apple Support Communities.
Best,
Brett L -
Time machine - sharing one external drive via wifi
Hi everybody,
I don't know if this is the right comunity, I apologize if it's not.
I have a question about time machine application.
I would like to use one external hd for multiple macs to backup with time machine.
I read about different method, the one that I think is better for me is to sharing the HD on a network.
I have one Imac and two macbook.
What I did is to connect the HD to the Imac and than I shared the HD volume with sharing files.
I create two accounts for the macbooks and then I connected them.
So far so good.
But I din't use this network configuartion for the first backup, what I did instead was to connects the different computers one by one with thunderbolt.
Now I had to change the destination dirve from the old HD (connected via thunderbolt) and the "new" shared HD - actually is the same drive!
I thought that the macbook time machine app just recognize the last backup and just makes a new one from that point.
But it seems doing a new backup. (Last backup: none)
It creates a new file Macbook of Alessandro.sparsebundle
Any tips?
thanks in advance
AlessandroOr do you have a better idea for sharing via wifi an external HD?
What I didn't say is that I'm using the internet connection wifi.
Should I make a new wifi network just for the backups? -
Upload multiple files to iphone via wifi - completely freeze
Hi,
I upload files to iphone via wifi and air sharing app a lot. Just connect with finder and drag&drop files one at a time and everything is fine, but when you select more files and try to copy them to iphone together Leopard completely freeze. Totally. You cannot force quit finder, cannot run activity monitor, cannot kill finder in terminal or even restart the computer. Just shut down with holding the power button...
What's wrong? :/
(sorry for english;)when i had around 50 reports to move from local to server , best idea is to a ) place all your reports in C:\..\My Documents\PC_NW\..domain1..\..username..\AppInfo\..appsetname..\..application..\eExcel\Reports (local folder )
b) open BPC excel -> etools-> Save Dynamic templates -> reports
c) Select Local folder select all the files you want to copy ,and right click copy
d) Select Company folder paste files -
Restored it from a backup and now there's no music on it. In the music tab it iTunes says: Thomas iPhone has access to music on iCloud. Songs can be fetched via WIFI or a mobile network. The pnly thing I can chose to sync are voice memos.
What can I do?If you want all the songs from an artist on your phone you can to to the artist view, tap on the artist, scroll to the bottom of the list and you will see a Download All button. This works for playlists and albums too (scroll to the bottom and tap the Download All button). I suppose if you wanted all your music on your phone you could create a smart playlist in iTunes on your computer that would contain all your music, upload it to iTunes match (Store>Update iTunes Match), and then you would get a Download All button at the bottom of this playlist on your phone to download all your songs.
-
My macbook pro cannot connect to internet via wifi
I have a Macbook Pro 2010 OS X 10.8.3. I cannot connect to internet via wifi (Air por). My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password. when I type in my password a dialog box gives me timeout error. Please could anyone help me. I am using ethernet for my connection at the moment. Do I need to reset my macbookpro? if yes, what will happen to my applications and operating system (mountain lion)?
MonirehWhen you use the Airport utility what happens?
What is in the System Preferences control panel for Network settings?
http://www.apple.com/support/airport - there is a forum just for Airport Community
Airport Express FAQ
http://support.apple.com/kb/HT1515
Wi-Fi Setup Considerations
Things to consider before you begin
Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
When using Ethernet, Cat6 cable is recommended.
The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
You will need to consider what AirPort Utility settings to adopt.
You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
AirPort Discussions
Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
More
Direct you to the proper forum for MacBook :
MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
Mac OS X Forums
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro -
hi, there, i got my iphone4 updated via wifi n its downloaded, its shows when i check the software update n when i install it, it shows verifying the software n after a couple of seconds comes back with "error while installing ios6" failed so many attempts and even tried to reset the phone, but no use, then i tried latest updated itunes too, can u believe it, it took ages to download n when it was 880mb of the 899mb file, error occured , so many failed attempts, can some one tell me what to do ? are there any issues with iphone4 updates? m scared to update it now, but really wanna get it on my phone.
I have experienced a similar error with the iPhone 4S. The new version of iTunes will not let me restore the phone, it must be updated and nothing appears to be happening. Suffice it to say I am not amused. Apple needs to work this out - I had trouble updating to 8.0.2 as well.
-
I'm able to connect via wifi but not via ethernet
I have a iMac, Mac OS X v10.7.5, and recently had a problem connecting to internet. I can connect via wifi, but when I try connecting via ethernet it's not working. When I go to the preferences > network, it shows "green" / connected for ethernet but when I open up Safari or Firefox, it doesn't show a connection to the internet.
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.
10.5/10.6 instructions, System Preferences>choose interface>Advanced>Proxies Tab, make sure none are set, like for HTTP & HTTPS. -
My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks!My early 2011 MacBook Pro 15 inch is currently online, with good (albeit slow... although that is due to the service provider) internet connectivity via wifi. The icon shows that I am connected to my network with full bars. I use an Airport Time Capsule as my wireless router, purchased late last year, and it has worked well until now. Internet comes via cable modem (provided by the cable company), and can be patchy and quirky, so I am often rebooting the modem, but the airport wifi router typically does not need to be rebooted with the modem to regain connectivity.
My problem is that my time capsule has not backed up in more than 10 days. When I went to investigate this, it claims it cannot find the time capsule. when I open the airport utility on the laptop it claims there is no airport connected (although there is the green light next to the internet icon). I checked on this using the airport utility app on my iPad, and it has no problem identifying the router as an airport time capsule. I did update the firmware on the router using the app on the iPad, but it made no difference to the laptop.
First question: Do you think this is a problem with the Airport router or my MacBook?
Second Question: what can I do about it?
My MacBook feels like it is on its last legs anyway, so I am currently looking at replacements, but I really want to make sure it is backed up in case it dies before the new one arrives!! On the other hand, we have serious power issues here, and while the router is on a UPS, the UPS battery is basically fried and conks out in about 5 minutes, so the Airport is constantly being cycled on and off, which I worry could also be causing problems with the proper operation of the device (although the fact that it works with the iPad makes me think that is not the case... but I don't really know).
Thanks! -
As I said before both app's send signals but none are received by Mainstage and both the ipad 3 (6.1) and macbook pro (10.7.5) see each other via WIFI on the network set up, which I think I did right. I have tried MIDI Disigner and Mainstage shows MIDI activiti, what can I be doing wrong?
Thanx in advance.I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay. -
How to connect the iPhone 4 to macbook pro via wifi
How can I connect my iphone 4 to my Macbook pro via wifi? Both devices are using the same wifi... I need your help.... Thanks a lot!
you do NOT do this via Bluetooth. If you have iOS 5, you can synch via WiFi. If not, you sync via USB
-
My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?
Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
Macbook Pro can't find Canon MG6350 via wifi
Macbook Pro purchased earlier this year and running OS X (10.9.1) can no longer find my new Canon MG6350 printer via wifi. Printer can also not be found by other new Macbook Pro, iPad Air or iPhones.
I have reset Canon printer, Macbook Pro printer system, downloaded latest drivers, tried inputing Canon printer IP address. Nothing works permanently. I temporary resolved issue by re-enabling Boujour on Canon printer settings, which magically allowed printer to appear on all devices, but this "fix" has now stopped working. Can also see all devices on BT Home Hub 3 when logged in as administrator.
I can print via USB, but want wifi printing to work. Very frustrated, as it worked brilliantly before latest OS X / iOS upgrades. Any suggestions or help appreciated.Thank you for your interest Clinton.
Yes of course the printer connected to the wifi network. I can see all devices including the printer when logged on as Administrator on the BT Home Hub. I have also reset the Hub itself several times and reconnected all devices.
Note that I had no problem setting up the printer and all devices wirelessly on the network previously, and that this exact setup was working for months brilliantly and without issue until roughly the time I upgraded to the latest releases of OS and iOS on all my Apple devices.
I have also reset the printer to its factory setting several times, reconnected all devices to the network numerous times and have spent roughly four hours trying everything I can think of on both the printer and Mac to no avail. Hence my post. And yes all devices have the latest drivers as indicated by Apple and Canon. -
Syncing multiple iPhones/iPads/iPods for different users via WiFi on a single computer?
So my wife and I each have an iPhone running iOS 7.0.3 (11B511), she has an iPad (iOS 7, but unsure of the exact release), and my son has an iPod (also iOS 7, but unsure of the exact release). I've also have a Mac mini running Mac OS X 10.9 (13A603) with Server 3.0 (13S440) and iTunes 11.1.3 (8) 64-bit. I'd like us each to be able to sync any of our devices via WiFi when we're at home. We each have accounts on the server with thier own iTunes Libraries and associated with thier own iTunes Store accounts.
I've seen posts that explain how to sync multiple devices to a single account with a single library, and I've seen posts that explain how to sync different devices to different libraries under different users when each is the only user running iTunes at the time. Is there a way to allow each user to sync whenever they please without having to have the other users log out of iTunes, log themselves in, and then sync?
It sounds like, from what I've learned so far, that multiple users running iTues is not (or at least used to not) be enough to make this work. I'm looking for a definitive answer here though, not a guess that it can't be done based on previous versions or speculation. If you're not sure but want to share your thoughts and theories only, please indicate as much in your response. Thanks.Welcome to AD!
Here is an article on using multiple ipods. I suggest method 1 and steer clear of method 3.
http://support.apple.com/kb/HT1495
For your point #1, sharing music on same PC between users, put it in a shared library & set permissions as directed here
http://support.apple.com/kb/HT1203
For #2, itunes doesn't have the capability to monitor folders for new content. You'll need to get something like the free program 'itunes folder watch'.
Maybe you are looking for
-
.
-
RAC Create ORA-00206: error in writing (block 3, # blocks 1) of controlfile
Why i am getting this error durint RAC DB Creation using dbca -datafileDestination /var/opt/oracle/oradata/orcl I cheek the directory and i am seeing 3 control files created in it. Out put of my alert.log file Any idea? ==============================
-
i follow the step that was given by this web page to set up an SSL: "http://www.onjava.com/pub/a/onjava/2001/05/03/java_security.html" and i m facing problem with the truststore. i don't have the "lib/security/jssecacerts" and the only file was the c
-
New to Dreamweaver - using Dreamweaver 3. Would like to put in a small slide show box for photos on the home page. What's the most straightforward way of doing this? I could not find docs about in the database. thanks.
-
How Do I Open The Excel Spreadsheet And Modify The Cell Data
How can I change the cell content in specific excel spreadsheet with ActiveX control? I am using LabVIEW7.1