So Basic...Please Help
Just bought a new computer (old one fell off the kitchen table). I was able to download iTunes and retrieve only my purchased music?? In addition, I my 20 or so playlists are not available. Do I have to set-up all these playlists again??? Please help!!!
*Do I have to set-up all these playlists again???*
The playlists you made were stored in the iTunes library on the hard drive of the original PC. If you have no back up of your old library to restore from then you have to redo everything on your new computer.
Similar Messages
-
Iphoto, itunes, ipad basics - please help
Hello. I'd like to transfer my 1,000s of photos from my pc to my ipad2 and use iphoto to pick the best ones. How do I do that w/o losing resolution and how to I put them back to the pc w/o losing the originals? I already used itunes to move them and I hope they did not lose resolution? I will now use iphoto to pick the best ones. Then I'm not sure how to move them back to my pc w/o overwriting the originals. Thank you.
Hello. I'd like to transfer my 1,000s of photos from my pc to my ipad2 and use iphoto to pick the best ones. How do I do that w/o losing resolution and how to I put them back to the pc w/o losing the originals?
You can't do either of those. If you want to preserve the original you need to do that work on your Mac.
Photos sent from iPhoto to your iPad via iTunes are optimised for the iPad screen, and are lower quality.
Regards
TD -
My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!
i have the same problem but i have ios 5.01. how do you unsync? please help, thanks
-
I am new to mac please help me basic tips an trick to use mac
i am new to mac please help me basic tips an trick to use mac its very frustrating for any thing i have to call apple help line
any acesserious to macbook air 13 like any silicon case or carry case or some acesserious
i have delete contains of master folder of phothos still i can see phothos in my mac so how can i delete itApple has a site for new users. Use it. Also, David Pogue is an excellent tech writer who has penned a series called the Missing Manual. I assume you've come to the Mac from the Windows world and he's written one especially for switchers. I've linked to the version for Mavericks (10.9) but if you have an earlier version of the Mac OS he's written a similar book for them as well.
-
i cannot backup my iphone4s because no more storage is displayed when the storage statistics shows Total Storage 5GB and Available Storage 5GB - basically i haven't used any memory but i cannot backup! please help. i am only trying to back up my notes and contacts. that's it. and i don't think it will use up 5GB
On your iPhone, go to Settings>iCloud>Storage & Backup>Manage Storage. There you should be able to see how much of your used storage is allocated to different things (ex., iphone backup, ipad backup, mail). From there you should be able to figure out what is going on.
-
my ipod wont connect to itunes, i have re-installed itunes ...reset my ipod...re-boot my computer...basically i've done eveything i could but no joy it even shows on my computer but simply does not link in to my itunes. Please HELP !!!
If you're unable to do the Restore, go into Recovery Mode per the instructions here.
-
HP mini model differences? Basic buyer info missing -- please help
Ok, so I want a gray or black model in the UK, and it's narrowed down on the HP website to:
HP Mini 210-4160ea PC (B1E15EA) 320 pounds
HP Mini 210-4120ea PC (A9E61EA) 270 pounds
HP Mini 210-4120sa PC (A7R29EA) 249 pounds
Problem is the technical specifications for them are identical. What is the difference? Searching the internets leads to lots of different contradicting information about missing bluetooth / microphone jacks / integrated wifi...
Seriously, not putting this basic info is ridiculous. Shame on you HP!
Someone please help me out!!What is your P/N?
How Do I Find My Model Number or Product Number?
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.
there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit. -
I haven't had issues with this in the past and I've checked the different modes the layers are in as well as the brushes are in. I've also checked spacing to make sure it isn't wrong. An example of what it is doing, would be to use the brush tool and try to draw a circle. Normally, this wouldn't be an issue but the tool only makes a dot as if I quickly pressed and released tool, but I'm holding down to draw the image. All tools that do similar functions such as blur, eraser, pencil, paint are doing the same thing.... Please help!!
Photoshop Elements doesn't respond when you use editing tools in Mac OS X 10.10
-
Some very basic problem PLEASE HELP ME :(
hi,
im just new to EJB's and WebLogic. i have integrated JBuilderX with BEAweblogic 8.1 and then made simplest ejb.
started the server.
server successfuly startedthen made test client and while running test client i got following error...
"EJBModule.jar": Spaces in the temporary directory path may cause WebLogic APPC utility to produce fatal compile errors.
"EJBModule.jar": Spaces in the classpath may cause WebLogic APPC utility to produce fatal compile errors.
"EJBModule.jar": C:\bea\jdk142_04\bin\javaw -classpath "C:\bea\weblogic81\server\lib\weblogic_sp.jar;C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogic81\server\lib\webservices.jar;C:\Documents and Settings\Administrator\jbproject\ejbsess\EJBModule.jar;" weblogic.appc -keepgenerated -forceGeneration -compiler C:/bea/jdk142_04/bin/javac "C:/Documents and Settings/Administrator/jbproject/ejbsess/EJBModule.jar.jar" -output "C:/Documents and Settings/Administrator/jbproject/ejbsess/EJBModule.jar"
AND
"EJBModule.jar": <Nov 3, 2004 10:47:15 PM GMT+05:00> <Warning> <EJB> <BEA-010054> <EJB Deployment: WebLogicSes has a class ejbsess.WebLogicSesBean that is in the classpath. This class should only be located in the ejb-jar file.>
"EJBModule.jar": <Nov 3, 2004 10:47:16 PM GMT+05:00> <Warning> <EJB> <BEA-010054> <EJB Deployment: WebLogicSes has a class ejbsess.WebLogicSesHome that is in the classpath. This class should only be located in the ejb-jar file.>
"EJBModule.jar": <Nov 3, 2004 10:47:16 PM GMT+05:00> <Warning> <EJB> <BEA-010054> <EJB Deployment: WebLogicSes has a class ejbsess.WebLogicSes that is in the classpath. This class should only be located in the ejb-jar file.>
"EJBModule.jar": [J2EE:160127]ERROR: Could not delete previous archive: C:\Documents and Settings\Administrator\jbproject\ejbsess\EJBModule.jar
PLEASE HELP ME WAT TO DO....
WAITING...
:-(hi,
i again made the whole thing with C:\project\weblogicsessproject
i just simply made session bean and one method getMessage() which simply return String message.
i compile that code and get following warning..
"EjbsessModule.jar": Spaces in the temporary directory path may cause WebLogic APPC utility to produce fatal compile errors.
then i run the server from JBuilder which runs correctly and gives the message to client that...
<Nov 10, 2004 1:09:41 PM GMT+05:00> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 7001, ip address *.*>
AND ON RUNNING TEST CLIENT OF JBUILDER I GET NAMING EXCEPTIONS...
C:\bea\jdk142_04\bin\javaw -classpath "C:\project\weblogicsessproject\classes;C:\bea\weblogic81\server\lib\weblogic_sp.jar;C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogic81\server\lib\webservices.jar;C:\bea\jdk142_04\jre\lib\charsets.jar;C:\bea\jdk142_04\jre\lib\ext\dnsns.jar;C:\bea\jdk142_04\jre\lib\ext\ldapsec.jar;C:\bea\jdk142_04\jre\lib\ext\localedata.jar;C:\bea\jdk142_04\jre\lib\ext\sunjce_provider.jar;C:\bea\jdk142_04\jre\lib\im\indicim.jar;C:\bea\jdk142_04\jre\lib\im\thaiim.jar;C:\bea\jdk142_04\jre\lib\jce.jar;C:\bea\jdk142_04\jre\lib\jsse.jar;C:\bea\jdk142_04\jre\lib\plugin.jar;C:\bea\jdk142_04\jre\lib\rt.jar;C:\bea\jdk142_04\jre\lib\sunrsasign.jar;C:\bea\jdk142_04\lib\dt.jar;C:\bea\jdk142_04\lib\htmlconverter.jar;C:\bea\jdk142_04\lib\tools.jar" weblogicsessproject.WebLogicSesTestClient1
-- Initializing bean access.
javax.naming.NameNotFoundException: Unable to resolve 'WebLogicSes' Resolved [Root exception is javax.naming.NameNotFoundException: Unable to resolve 'WebLogicSes' Resolved ]; remaining name 'WebLogicSes'
at weblogic.rjvm.BasicOutboundRequest.sendReceive(BasicOutboundRequest.java:108)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:284)
-- Failed initializing bean access.
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.invoke(ReplicaAwareRemoteRef.java:244)
at weblogic.jndi.internal.ServerNamingNode_813_WLStub.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:369)
at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:357)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at weblogicsessproject.WebLogicSesTestClient1.initialize(WebLogicSesTestClient1.java:34)
at weblogicsessproject.WebLogicSesTestClient1.<init>(WebLogicSesTestClient1.java:19)
at weblogicsessproject.WebLogicSesTestClient1.main(WebLogicSesTestClient1.java:270)
Caused by: javax.naming.NameNotFoundException: Unable to resolve 'WebLogicSes' Resolved
at weblogic.jndi.internal.BasicNamingNode.newNameNotFoundException(BasicNamingNode.java:897)
at weblogic.jndi.internal.BasicNamingNode.lookupHere(BasicNamingNode.java:230)
at weblogic.jndi.internal.ServerNamingNode.lookupHere(ServerNamingNode.java:154)
at weblogic.jndi.internal.BasicNamingNode.lookup(BasicNamingNode.java:188)
at weblogic.jndi.internal.RootNamingNode_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:477)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:108)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:420)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:144)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:415)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)
IM DOING ALL THAT WITH HELP OF BORLAND WHITE PAPERS...
please help me
waiting -
Simple Card Game - that works
Now want to give it Multiplayer Functinality
Also I am confused, how do I get the client to get information sent from my server to it, since it is not listening (and store it into a string)
I really just want a bare bones code to
have A Master Server that Can recieve Multiple Connections
That Master Server Needs to be able to get messages from each user connected to it
The Master Server Needs to be able to send Messages to each user connected to it
each user (client) needs to be able to recieve and show messages recieved from the master server!
That really sums it up - I need to stream line the network code. I need to focus on the actual card game itself!
Please Help!!!!
1 - Player will start their game (client)
2 - The client will connect to the server
3 - Master Server Accepts the Connect
4 - The Client will automatically send their login info as a string to the Master Server
5 - Master Server Will check the string and get user info - if the Info is correct then the Master Server will send a message to the Client as a string letting it know it is connected
6 - Master Server Will give that player a UniqueID
7 - Master Server Will put Player in a list as An Available Player
8 -
9 - Now
10 -
11 - Player 2 will start their game (client)
12 - The client will connect to the server
13 - Master Server Accepts the Connect
14 - The Client will automatically send their login info as a string to the Master Server
15 - Master Server Will check the string and get user info - if the Info is correct then the Master Server will send a message to the Client as a string letting it know it is connected
16 - Master Server Will give that player a UniqueID
17 - Master Server Will put Player2 in a list as An Available Player
18 -
19 - Now since there are 2 players
20 -
21 - The 2 players are removed from the Available Player List
22 -
23 - Master Server will randomly pick a player 1 to go first
24 - Master Server Sends Message to Player to take turn (as a string code)
25 - Player 1 plays a card - the card info is sent as a string to the master server
26 - The Master Server then sends the Player 1 info to Player 2
27 - Player 2 Client gets the info from the master server that contains the card info from player 1
28 - Player 2 plays their card and the information is sent to the master Server
29 -
30 - Until
31 -
32 - One of the players is considered a winner
33 - At that Time the Server will Record Player 1 as winner or loser and Player 2 as winner or looser
34 - Now The 2 Players are put back onto the available players list
Now this is where I am stuck.
Step 11 -
How do I get my progam to accept more than one person?
So my problem is my TCPControl I guess SO code below
ClientTCPControl.vb (Class)
Imports System.IO
Imports System.Net
Imports System.Net.Sockets
Imports System.Threading
Imports System.Text.RegularExpressions
Public Class ClientTCPControl
Public Client As TcpClient
Public DataStream As StreamWriter
Public Sub New(Host As String, Port As Integer)
'Client
Client = New TcpClient(Host, Port)
DataStream = New StreamWriter(Client.GetStream)
End Sub
Public Sub Send(Data As String)
DataStream.Write(Data & vbCrLf)
DataStream.Flush()
End Sub
End Class
MasterSercerTCPControl.vb
Imports System.IO
Imports System.Net
Imports System.Net.Sockets
Imports System.Threading
Imports System.Text.RegularExpressions
Public Class MasterServerTCPControl
Public Event MessageReceived(sender As MasterServerTCPControl, Data As String)
Public PublicServerIP As IPAddress = IPAddress.Parse("10.0.0.6")
Public ServerPort As Integer = 64554
Public Server As TcpListener
Private ComThread As Thread
Public IsListening As Boolean = True
'CLIENTS
Private Client As TcpClient
Private ClientData As StreamReader
Public Sub New()
Server = New TcpListener(PublicServerIP, ServerPort)
Server.Start()
ComThread = New Thread(New ThreadStart(AddressOf Listening))
ComThread.Start()
End Sub
Private Sub Listening()
'Create Listener Loop
Do Until IsListening = False
'Accept Incoming Connections
If Server.Pending = True Then
Client = Server.AcceptTcpClient
ClientData = New StreamReader(Client.GetStream)
End If
'Raise event for incoming messages
Try
RaiseEvent MessageReceived(Me, ClientData.ReadLine)
Catch ex As Exception
End Try
'Reduce CPU Usage
Thread.Sleep(100)
Loop
End Sub
End Class
Client Code This Sub Runs when the Player Clicks the Connect Button
Private Sub cmdConnect_Click(sender As Object, e As EventArgs) Handles cmdConnect.Click
'Make Connection to Master Server
Client = New ClientTCPControl("10.0.0.6", 64555)
If Client.Client.Connected Then cmdConnect.Text = "Connected"
varConnectedToServer = True
'Create Login Credential String
LoginCredentials = "login" & "," & varUserName & "," & varUserEMail & "," & varUserPassword & "," & varUserState & "," & varUserMachineIP
& "," & varUserInternetIP & "," & varPlayerPort & ","
SendLoginCredentialsMessage()
End Sub
Also I am confused, how do I get the client to get information sent from my server to it, since it is not listening (and store it into a string)
I really just want a bare bones code to
have A Master Server that Can recieve Multiple Connections
That Master Server Needs to be able to get messages from each user connected to it
The Master Server Needs to be able to send Messages to each user connected to it
each user (client) needs to be able to recieve and show messages recieved from the master server!
That really sums it up - I need to stream line the network code. I need to focus on the actual card game itself!
Please Help!!!!I suggest you search the net until you find something that sounds like it may be able to do what you want to do.
Like this link from CodeProject
C# \ VB .NET Multi-user Communication Library (TCP).
Although for the server to work I suppose it will need to be on a machine which has a public internet IP address or perhaps port forwarding would need to be used or dynamic dns. Things which may cost extra or not be available from your ISP.
What you need to know about the Internet
Making your Computer Accessible from the Public Internet
La vida loca -
A very basic query, Please help.
Hi all,
I am very new to java and need your help in getting rid of this error. Please help.
I have written two java files. packageTest.java and callPackageTest.java. Following is the code:
// packageTest.java
package aaa.bbb.ccc;
public class packageTest
public packageTest()
System.out.println("This is from inside package test constructor");
public static void main(String[] args)
packageTest obj1 = new packageTest();
System.out.println("Hello World!");
//callPackageTest.java
import aaa.bbb.ccc.*; // there is a star at the end. Seems to get removed by the forum every time.
public class callPackageTest
public static void main(String[] args)
packageTest obj1 = new packageTest();
System.out.println("Hello World!");
Now when I compile packageTest.java with the following command:
javac -d . packageTest.java
I get correct class file created in correct directory, i.e. aaa/bbb/ccc/packageTest.class.
But now when I try to compile the java file callPackageTest.java with the following command:
javac -cp . callPackageTest.java
I get the following error message:
class file contains wrong class.
Please remove or make sure it appears in the correct subdirectory of the classpath
I also observed that when I put the complete class name in the import statement in the file callPackageTest.java ( import aaa.bbb.ccc.packageTest; ) then there is no error. But I expect the same to be done when I write import aaa.bbb.ccc. * ( an star at the end)
Where is the mistake ? Please help.
Thanks in advance.
Sinha
Edited by: sinha_java on May 26, 2010 10:50 PM
Edited by: sinha_java on May 26, 2010 10:52 PMThanks guys for all the information about how to post and other forum related stuff. So here goes the formatted code.
I have written two java files. packageTest.java and callPackageTest.java. Following is the code:
// packageTest.java
package aaa.bbb.ccc;
public class packageTest
public packageTest()
System.out.println("This is from inside package test constructor");
public static void main(String[] args)
packageTest obj1 = new packageTest();
System.out.println("Hello World!");
//callPackageTest.java
import aaa.bbb.ccc.*;
public class callPackageTest
public static void main(String[] args)
packageTest obj1 = new packageTest();
System.out.println("Hello World!");
Now when I compile packageTest.java with the following command:
javac -d . packageTest.javaI get correct class file created in correct directory, i.e. aaa/bbb/ccc/packageTest.class.
But now when I try to compile the java file callPackageTest.java with the following command:
javac -cp . callPackageTest.javaI get the following error message:
class file contains wrong class.
Please remove or make sure it appears in the correct subdirectory of the classpath
I also observed that when I put the complete class name in the import statement in the file callPackageTest.java ( import aaa.bbb.ccc.packageTest; ) then there is no error. But I expect the same to be done when I write import aaa.bbb.ccc.*
Where is the mistake ? -
Please help with some basic javascript syntax
Can anyone please help me with a "remove from favourites"
facility i'm working on.
I query to get all the favouites, then i output those
favourites down the page
each favourite has a "remove from favourites" link - i want
to make it so when a user clicks this link they get a javascript
confirm box pop up saying "are you sure you want to remove
#favourites name# from your favourites?"
so i have..
function remove(profile,name) {
if (confirm("Are you sure you want to remove #name# from
your favourites?")) {
window.location =
"remove_from_favourites.cfm?deleteFavID=#profile#&removedName=#name#"
and
<div
onClick="remove(#rs_favs.favouriteeID#,#rs_favs.firstName#)"
>Remove from favourites</div>
but it doesn't work - i think there are 2 problems..
problem 1 - i have used the CF # in the remove function as i
don't know what one does in javascript to "output" a variable (see
where it says "Are you sure you want to remove #name# from your
favourites") what should i use in place of the "#"?
problem 2 - i have tried to pass to variables to the function
>>
onClick="remove(#rs_favs.favouriteeID#,#rs_favs.firstName#)" and i
have separated them but a commer "," but i suspect that is
incorrect syntax
if anyone could please help me i'd be very grateful as, to be
honest, i love coldfusion - but javascript just hurts my head! :(
thanks very much indeed.
PS the way i've wrapped my "remove from favourites" text in a
div rather than making it an actual "a href" link - is that right
or is there a better way (ideally i'd like the text to look like
all my other links (ie they underline on mouse over)You can simply add CSS commands to define your div to look
like your links.
div#FavLink
color: blue;
text-decoration: underline;
cursor: pointer;
<div id="FavLink"
onClick="remove(#rs_favs.favouriteeID#,'#rs_favs.firstName#')"
Remove
from favourites</div>
That should get you started.
happysailingdude wrote:
> thanks CFDEBUG that sorted it - thanks very much
>
> just one last thing - more of a CSS issue i think but
maybe not.
>
> so now I have <div
>
onClick="remove(#rs_favs.favouriteeID#,'#rs_favs.firstName#')"
>Remove from
> favourites</div>
>
> which of course isnt a link so it just looks like my
standard text (as if i'd
> done <p>Remove from favourites</p>
>
> how do i make the "Remove from favourites" text look
like a link as if i'd
> done <a href="remove_from_favourites.cfm?....."
>Remove from favourites</a>
>
> i think ive seen links that when you hover over them it
says "javascript:void"
> or something at the bottom of the browser - is this the
answer and if so what
> is the correct syntax please? or do i need to do
something with my CSS file?
>
> thanks very much indeed for any further help anyone can
give me to get this
> page finshed off - thank you
> -
I have firefox 6.02. It started crashing on my desktop several days ago after the update. It started crashing on my laptop yesterday, a few days after the update. I have Windows XP on my desktop and Windows 7 on my laptop. Both are HP. I upgraded to the 7.0 beta today but it is still crashing on both computers. The crashes are happening every few minutes. McAfee has not found anything. Please help. I am ready to switch to chrome.
Application Basics
Name
Firefox
Version
7.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:7.0) Gecko/20100101 Firefox/7.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.911
true
[email protected]
Download Statusbar
0.9.8
true
{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
DownloadHelper
4.9.5
true
{b9db16a4-6edc-47ec-a1f4-b86292ed211d}
Feedback
1.1.2
true
[email protected]
Greasemonkey
0.9.11
true
{e4a8a97b-f2ed-450b-b12d-ee082ba24781}
Java Quick Starter
1.0
true
[email protected]
McAfee SiteAdvisor
3.4.0
true
{4ED1F68A-5463-4931-9384-8FFF5ED91D92}
RealPlayer Browser Record Plugin
14.0.3
true
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Java Console
6.0.22
false
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
false
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
false
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
false
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
Yahoo! Toolbar
2.3.11.20110727115843
false
{635abd67-4fe9-1b23-4f01-e679fa7484c1}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.centurylink.net/
browser.startup.homepage_override.buildID
20110908135051
browser.startup.homepage_override.mstone
rv:7.0
extensions.lastAppVersion
7.0
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729)
gfx.blacklist.layers.direct3d9
2
keyword.URL
http://search.yahoo.com/search?fr=mcafee&p=
network.cookie.prefsMigrated
true
network.http.proxy.version
1.0
places.database.lastMaintenance
1315870617
places.history.expiration.transient_current_max_pages
20100
places.last_vacuum
1297306180
print.print_printer
HP Photosmart 2570 series
print.printer_HP_Photosmart_2570_series.print_bgcolor
false
print.printer_HP_Photosmart_2570_series.print_bgimages
false
print.printer_HP_Photosmart_2570_series.print_command
print.printer_HP_Photosmart_2570_series.print_downloadfonts
false
print.printer_HP_Photosmart_2570_series.print_edge_bottom
0
print.printer_HP_Photosmart_2570_series.print_edge_left
0
print.printer_HP_Photosmart_2570_series.print_edge_right
0
print.printer_HP_Photosmart_2570_series.print_edge_top
0
print.printer_HP_Photosmart_2570_series.print_evenpages
true
print.printer_HP_Photosmart_2570_series.print_footercenter
print.printer_HP_Photosmart_2570_series.print_footerleft
&PT
print.printer_HP_Photosmart_2570_series.print_footerright
&D
print.printer_HP_Photosmart_2570_series.print_headercenter
print.printer_HP_Photosmart_2570_series.print_headerleft
&T
print.printer_HP_Photosmart_2570_series.print_headerright
&U
print.printer_HP_Photosmart_2570_series.print_in_color
true
print.printer_HP_Photosmart_2570_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_2570_series.print_margin_left
0.5
print.printer_HP_Photosmart_2570_series.print_margin_right
0.5
print.printer_HP_Photosmart_2570_series.print_margin_top
0.5
print.printer_HP_Photosmart_2570_series.print_oddpages
true
print.printer_HP_Photosmart_2570_series.print_orientation
0
print.printer_HP_Photosmart_2570_series.print_page_delay
50
print.printer_HP_Photosmart_2570_series.print_pagedelay
500
print.printer_HP_Photosmart_2570_series.print_paper_data
1
print.printer_HP_Photosmart_2570_series.print_paper_height
11.00
print.printer_HP_Photosmart_2570_series.print_paper_size_type
0
print.printer_HP_Photosmart_2570_series.print_paper_size_unit
0
print.printer_HP_Photosmart_2570_series.print_paper_width
8.50
print.printer_HP_Photosmart_2570_series.print_reversed
false
print.printer_HP_Photosmart_2570_series.print_scaling
1.00
print.printer_HP_Photosmart_2570_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_2570_series.print_to_file
false
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_top
0
privacy.cpd.cache
false
privacy.cpd.cookies
false
privacy.cpd.formdata
false
privacy.cpd.sessions
false
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
security.enable_ssl2
true
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce 6150 LE
Vendor ID
10de
Device ID
0241
Adapter RAM
Unknown
Adapter Drivers
nv4_disp
Driver Version
8.2.0.5
Driver Date
1-24-2006
WebGL Renderer
Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.686)
GPU Accelerated Windows
0/1. Blocked for your graphics driver version.I have firefox 6.02. It started crashing on my desktop several days ago after the update. It started crashing on my laptop yesterday, a few days after the update. I have Windows XP on my desktop and Windows 7 on my laptop. Both are HP. I upgraded to the 7.0 beta today but it is still crashing on both computers. The crashes are happening every few minutes. McAfee has not found anything. Please help. I am ready to switch to chrome.
Application Basics
Name
Firefox
Version
7.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:7.0) Gecko/20100101 Firefox/7.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.911
true
[email protected]
Download Statusbar
0.9.8
true
{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
DownloadHelper
4.9.5
true
{b9db16a4-6edc-47ec-a1f4-b86292ed211d}
Feedback
1.1.2
true
[email protected]
Greasemonkey
0.9.11
true
{e4a8a97b-f2ed-450b-b12d-ee082ba24781}
Java Quick Starter
1.0
true
[email protected]
McAfee SiteAdvisor
3.4.0
true
{4ED1F68A-5463-4931-9384-8FFF5ED91D92}
RealPlayer Browser Record Plugin
14.0.3
true
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Java Console
6.0.22
false
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
false
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
false
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
false
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
Yahoo! Toolbar
2.3.11.20110727115843
false
{635abd67-4fe9-1b23-4f01-e679fa7484c1}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.centurylink.net/
browser.startup.homepage_override.buildID
20110908135051
browser.startup.homepage_override.mstone
rv:7.0
extensions.lastAppVersion
7.0
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729)
gfx.blacklist.layers.direct3d9
2
keyword.URL
http://search.yahoo.com/search?fr=mcafee&p=
network.cookie.prefsMigrated
true
network.http.proxy.version
1.0
places.database.lastMaintenance
1315870617
places.history.expiration.transient_current_max_pages
20100
places.last_vacuum
1297306180
print.print_printer
HP Photosmart 2570 series
print.printer_HP_Photosmart_2570_series.print_bgcolor
false
print.printer_HP_Photosmart_2570_series.print_bgimages
false
print.printer_HP_Photosmart_2570_series.print_command
print.printer_HP_Photosmart_2570_series.print_downloadfonts
false
print.printer_HP_Photosmart_2570_series.print_edge_bottom
0
print.printer_HP_Photosmart_2570_series.print_edge_left
0
print.printer_HP_Photosmart_2570_series.print_edge_right
0
print.printer_HP_Photosmart_2570_series.print_edge_top
0
print.printer_HP_Photosmart_2570_series.print_evenpages
true
print.printer_HP_Photosmart_2570_series.print_footercenter
print.printer_HP_Photosmart_2570_series.print_footerleft
&PT
print.printer_HP_Photosmart_2570_series.print_footerright
&D
print.printer_HP_Photosmart_2570_series.print_headercenter
print.printer_HP_Photosmart_2570_series.print_headerleft
&T
print.printer_HP_Photosmart_2570_series.print_headerright
&U
print.printer_HP_Photosmart_2570_series.print_in_color
true
print.printer_HP_Photosmart_2570_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_2570_series.print_margin_left
0.5
print.printer_HP_Photosmart_2570_series.print_margin_right
0.5
print.printer_HP_Photosmart_2570_series.print_margin_top
0.5
print.printer_HP_Photosmart_2570_series.print_oddpages
true
print.printer_HP_Photosmart_2570_series.print_orientation
0
print.printer_HP_Photosmart_2570_series.print_page_delay
50
print.printer_HP_Photosmart_2570_series.print_pagedelay
500
print.printer_HP_Photosmart_2570_series.print_paper_data
1
print.printer_HP_Photosmart_2570_series.print_paper_height
11.00
print.printer_HP_Photosmart_2570_series.print_paper_size_type
0
print.printer_HP_Photosmart_2570_series.print_paper_size_unit
0
print.printer_HP_Photosmart_2570_series.print_paper_width
8.50
print.printer_HP_Photosmart_2570_series.print_reversed
false
print.printer_HP_Photosmart_2570_series.print_scaling
1.00
print.printer_HP_Photosmart_2570_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_2570_series.print_to_file
false
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_top
0
privacy.cpd.cache
false
privacy.cpd.cookies
false
privacy.cpd.formdata
false
privacy.cpd.sessions
false
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
security.enable_ssl2
true
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce 6150 LE
Vendor ID
10de
Device ID
0241
Adapter RAM
Unknown
Adapter Drivers
nv4_disp
Driver Version
8.2.0.5
Driver Date
1-24-2006
WebGL Renderer
Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.686)
GPU Accelerated Windows
0/1. Blocked for your graphics driver version. -
Airport not available on MacBook Pro 15 unibody mid 2009, PLEASE HELP!!!!
Ok, so I just recently put in a new hard drive and battery by myself, since my original MacBook Pro hard drive became "corrupted" most likely due to a parallel desktop software I was using. Anyway so I finally install everything on the new hard drive and airport is not working. The icon is NOT EVEN THERE on the menu bar. I go into Network and the only thing I've got is Ethernet and Firewall. I've tried the "+" thing, and it didn't work. I then went into "Assist Me" , then "Diagnostics" and the airport option is greyed out, so is the external modem. Oh, and the operating system is Snow Leopard OS X 10.6.3. Has a 2.8 GHz Intel Core 2 Duo Processor.
I also deleted the "SystemConfiguration" Folder and found something interesting. The "com.apple.airport.preferences.plist" was never there and when I reboot, the "com.apple.network.identification.plist" also disappeared. I had to drag it back into the folder from the desktop where I put a copy just in case something weird happened, which it did.
I checked System Profiler, clicked on AirPort and it gives me stuff under "Software Versions", so I'm guessing it's acknowledging that THERE IS a card and can give me all the information for it, but I can't get the mac to use it. I reset the PRAM AND SMC and still nothin.
So, I figured it must be hardware, right? So I open the mac like i did when I installed the new hard drive and battery, and I CANNOT FIND THE DARN AIRPORT CARD. On the mid 2010 models it's with the bluetooth card at the top and I've tried looking online for ANYONE, who has tried to get to the airport card on the mid 2009 model for the MacBook Pro 15 unibody. And found nothing. I think it's in the clutch, but I'm too scared to touch that area. Does anyone else have any ideas or have I covered all my bases?
I REALLY DO NOT want to go to Apple. I don't have AppleCare and don't have the money to have them poke around and tell me the same thing I already know. And I spent way too much on this computer to not be able to use it to full capacity. PLEASE HELP!!!!!!From Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
Your 2009 MBP is not compatible with AirDrop to an iPhone
Maybe you are looking for
-
NF-e e-mail para envio do arquivo XML para clientes
Olá pessoal, Gostaria de saber se existe algum campo no cadastro do Cliente / Fornecedor para cadastrar o e-mail para o envio do arquivo XML da NF-e. Obrigado, Jean
-
Hi everyone, I'm using wait for event step in my workflow of a custom event called zevent2. I'm not using the event as a start event of the workflow.The event is getting triggered at a certain point of the workflow programmatically. So for that what
-
Machine Authentication On One Vlan, User authentication on another
I am trying to have my wireless users authenticate the machines on one vlan and then based upon the user id from AD switch to another vlan if required. I have it working just fine except when the user logs on and ACS forces the new vlan, the IP stac
-
Distribution List administration not working?
Hello out there... Not a GroupWise guru by any means...hoping I overlooked something simple....Groupwise 7.03 server and client system...we are just trying to get Distribution List Administration working and are testing it out amongst ourselves (admi
-
Error: parse error before '.' & number of arguments doesn't match
Compiling my simple source code reports error error: parse error before '.' . But in fact there is not any "." token on this line. At my guess it has something to do with JNI C macros but I really have no idea how to find that bug // ##net_java_dev_j