So close...Mail help needed!

I desperately need to import mail from PC Outlook 2003 to mac mail 2.11.
I used Mozilla Thunderbird on the PC and imported all email into it fine. I then copy the folder on my mac and import using mail/import. All the folders show show up and every one contains exactly one (1) email. Some of these folders have anywhere from half a dozen to 500 emails in them and the size of the file reflects it, but only 1 email shows up in each folder. Any ideas?

Worked perfectly. My guess is that I needed to rebuild each mailbox seperately. Instead I was clicking on the 'import' folder and assuming it would rebuild each individual sub-mailbox, but that isn't the case.
Your help is greatly appreciated. Thanks!
ken

Similar Messages

  • New mac user, mail help needed please

    I have 2 mail accounts synched in my mail. My comcast account is operating fine. My mac account I am not receiving messages. I can send them, but I do not receive. I have a small circle with a small pie slice grayed out, beside my inbox which says messages stored on server. I have used the connection doctor and everything appears ok. I do get an error message when I close mail which says;
    _*Some actions taken while the account “[email protected]” was offline could not be completed online.*_
    _*Mail has undone actions on some messages so that you can redo the actions while online.*_
    _*Additional information: Operation could not be completed. (MFMessageErrorDomain error 1028.)*_
    Any help would be appreciated.
    thanks
    jeff

    Sorry. It was worth asking.
    How about this:
    In Mail preferences, click Accounts, select the dotMac account, click Advanced and un-check "Enable this account." Then quit Mail and launch it again, and go back and enable the dotMac account.
    In Mailbox Behaviors, un-check "Store sent messages on server" and "Store junk messages on server," and also "Store draft messages on server," if any are checked.
    Then quit Mail and re-launch.
    Check your dotMac mailbox by logging onto .Mac and make sure you have plenty of free disk space assigned to your mail account.
    Worth a try.

  • URGENT MAIL HELP NEEDED!

    Leopard has seriously screwed with Mail.
    Somehow while trying to make my .mac emails only appear in Mail and not on the server my .mac account has become Read Only. I can't move mails, delete mails, mark them as read. I can send and receive but nothing else. Mail worked exactly as I wanted it for many years and now it's completely shot.
    So, 2 things to resolve....
    Firstly, I need to make my .mac account not read only. The error box says the following but I can't find what it's on about
    The account path /Users/Ant/Library/Mail/Mac-ant.carr is not writable. Please change the Account Directory field in the Account Options tab to a writable directory
    Secondly, I just want my sent emails to live in the sent email box and not on the server!
    Hope someone can help!

    If this helps anyone.
    I installed Thunderbird and my .mac account works fine.
    So,
    I backed up and copied my pref file. App Zapped Mail and re-installed it. Without putting my pref file back in, the .mac account was still read only.
    Anyone...?

  • Sending mail help needed

    Howdy, just got the iPad, and cannot send emails to myself (my home computer) on wifi, also, will need to do this on any wifi network, any suggestions/help? thanks

    Hello, and thanks, what I did when I got the iPad was to sync, and during syncing it asked me if I wanted to use a previous iPad account, apparently it was confusing an iPhone account with the iPad insofar as I had inadvertently downloaded an iPad app by mistake a month ago. I let it use that account, and made some changes on the fly regarding various setlists, apps, podcasts that I wanted on the iPad. It also downloaded all the files to the various apps associated with that account, which is great, I didn't need to reload all of the files with notes, splashID, etc. When done, I was receiving mail fine over my wifi, but I cannot send any email over the wifi (which is all I have right now, no 3G...) Following some of the suggestions in this discussion forum, I deleted the email account and then re-entered the info, once that was completed (correctly), I was able to receive emails ONLY if all of my Mail accounts on my devices is closed, ie., the Mail program on my mac, and the iPhone turned off. But I can still not send my emails, also, after deleting the account and then reentering the mail account info, I cannot receive emails unless my Mail account is closed on the mac and my iPhone off, hope that helps!

  • Sending mails - help needed

    hi, i need some help for java mail, as i am a starter i would like to know few questions:
    I use internet connection from a local ISP with whom i do not have email signup, nor i know their mail server details or name, but i would like to send mail to a account on hotmail or yahoo but i don't know their email server info either, so what i should do?
    can you please explain in detail
    warm regards
    mustafa
    hyderabad
    india

    Hi,
    I use internet connection from a local ISP with whom i
    do not have email signup, nor i know their mail server
    details or name, but i would like to send mail to a
    account on hotmail or yahoo but i don't know their email
    server info either, so what i should do?You can use softwares like PostCast Server(www.postcastserver.com/)
    which is a free SMTP mail server program which enables you to send
    e-mail directly from your computer, without your Internet Service Provider's server.
    Other way, you can make use of free SMTP servers (a list of free
    SMTP servers is available at http://www.thebestfree.net/free/freesmtp.htm) to send mails.
    Hope this helps.
    Good Luck.
    Gayam.Srinivasa Reddy
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support/

  • Boolean search in apple mail help needed

    i tried this boolean search in apple mail - in an account that had these people, but it didn't work....
    Q: what am i doing wrong?
    to:[email protected] or to:[email protected]

    Maybe this page can help you construct complex searches in Mail:
    *http://www.hawaii.edu/askus/879*
    I noticed this line in the page:
    +Note: When searching Mac Mail does not use some frequently used wildcard searches. Use of the asterisk * or the syntax teresa@somewhere returns no matches.+

  • Mail Help Needed

    Hi. I just installed Lion on an external drive and I'm playing around with it.
    My favorite feature of Lion is the revamped Mail. However, I'm also confused about how to do searches.
    Once I enter some words in the search bar, how do I then filter that search by Subject, To, From etc? It was easy to do in the previous version of Mail. I can't figure out how to do it in the new version.
    So, any help is appreciated.
    Thanks.

    click in the search box and type,  select the input from the dropdown menu. Type again behind this token to start a new search token.
    Make sense?
    One limitation is the search box area does not expand to show all tokens if you exceed the space.

  • Address book and Mail help needed

    Greetings. I recently switched from Entourage to Mail. I'm having some troubles with Address Book and Mail. I hope that someone can help.
    1. I can't seem to find an easy way to determine if an email address is already in the Address Book. In Entourage, if the email address is not in the address book, it gives me the option to add it with a link at the top of the mail window. How can I tell if an email address from an incoming mail is in the Address Book or not?
    2. In Mail, when I right-click on a mail address that I am sure is in the Address Book, it often gives me the option to "Add to Address Book". Other times, it will give me the option to "Open in Address Book". There doesn't seem to be a pattern. Is there something that I can do to fix this inconsistency?
    3. In Entourage, when adding a new email address to the address book, I can just click on the button in the mail window to do that, which automatically opens the new address, and then I can edit information and add a category. In Mail, the same functionality requires several separate steps (Add to Address Book, open Address Book, find new email address, click on edit to make changes, drag to Group). Is there some way to streamline the process in Mail?
    Thanks much.

    I have the same problem as #2.
    I have a contact who sends me email from two addresses. However, in mail, the two address return different sender names - one is his initial "j" and the other is his full name.
    This makes it annoying to sort threads by the "from" field, or search for that sender.
    I added both to the address book, opened address book, and selected "merge contacts."
    They merged. But in mail, they still return different sender names! Merge failed!
    After merge, all the "j" emails still offer "add to address book" when i click them. When I do this, it creates a new address card, and if I merge this with the old merged card, then the email goes back to offering "add to address book" instead of updating all those emails with the sender's full name. Basically Mail is ignoring the address book just for that sender!
    I tried "add to address book" -> quit mail -> open address book
    There was the entry.
    Then open mail,
    There was the email, "open in address book" appeared and so I did.
    I edited the name to match the full name.
    Go back to mail. Still listed in mailbox as "j" instead of full name.
    Now "add to address book" has returned to the choices!
    Seems like a bug!!!

  • Proxy settings and Mail - help needed

    My company uses a proxy to access the web. I have configured the proxy via the preferences-network-proxies-manually prefpane. I have all of them set up (FTP, HTTP, HTTPS, RTSP, SOCKS and Gopher). I see nothing for mail and/or any ports.
    Launching mail results in the exclamation icon, which if you click on it says "Connection Failed. There may be a problem with the mail server or network. Check the settings...."
    The settings work fine once I leave my companies net access. I can access everything via the web. So what do I have to configure to get Mail to work?

    Actually, the problem could very well be precisely that you’ve enabled all the proxies. The Mac OS X 10.4.7 Update introduced connection issues as a result of (according to the documentation) “Mail now supports connecting to mail servers through a SOCKS proxy”. Such problems can usually be fixed by going to System Preferences > Network and disabling the SOCKS Proxy in the network configuration used to connect to the Internet, if it’s enabled. Not sure whether this would be an acceptable solution in your case, though.

  • E mail help needed

    My wife's mobile me account works but e mails are not loading on her iPhone or MacBook.  Any ideas?

    Today's e mails are loading but nothing prior to today is showing.

  • Mail Help Need

    Hello to the mac family,
    I have a problem that may have a solution, but I am stumped.
    I am a 9.2 user and used Outlook Express for years.
    I have a folder of saved e-mails in OE that I put on my flash drive.
    I set up Mail 3 on my new I-Mac. I was hoping my saved e-mails would be there.
    They are not even though I used the same server and stuff.
    Well when I open my flash drive, it shows my saved e-mail folders. i open the folder and
    it shows the files as "executeable unix files" This shows above the file in a viewer that looks like
    a book that is opened up. You can look at files etc in this viewer look.
    Any way is there a simple way I can open these files????
    They seem to be on my old slot load, but that is shutting off soon after booting. (power supply I think).
    I have posted in the 9 forum to see if there ideas from that end. I am an old mac user but a newbie to X. I would love to recover my saved e-mails.....Thanks in advance......JIm

    Is this Outlook or Outlook Express. The former is quite a different problem from the latter. I'm not sure what export options Outlook Express provides, but if it supports the mbox format then you want to export to that format. Mail will import mbox files.
    Otherwise go to VersionTracker or MacUpdate and look for one of the many import/export utilities such as Emailchemy. Alternatively you can try another email application that will import from Outlook Express and then can be imported to Mail - Netscape/Mozilla, Thunderbird, or Eudora.

  • Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Help needed! Just want to cancel my year subscription. No answer from support via mail, noone answers when I call, support chat don't work.

    Hi there
    I'll pass your details to our Russian team and they'll contact you to assist further.
    Kind regards
    Bev

  • *Help Needed* Adding multiple emails/mailing list in the email subscription

    Help Needed
    Hi,
    Can someone help me in adding multiple email address/mailing list in the email subscription for interactive reports in Apex 4.
    pls mail me at [email protected]
    Regards,
    Sunny

    The doc does not mention a separator for the email addresses because we only support one email address per subscription. I have logged a task for our next release to look at expanding it and allowing multiple.
    -- Sharon

  • Urgent help needed with un-removable junk mail that froze Mail!!

    Urgent help needed with un-removable junk mail that froze Mail?
    I had 7 junk mails come in this morning, 5 went straight to junk and 2 more I junked.
    When I clicked on the Junk folder to empty it, it froze Mail and I can't click on anything, I had to force quit Mail and re-open it. When it re-opens the Junk folder is selected and it is froze, I can't do anything.
    I repaired permissions, it did nothing.
    I re-booted my computer, on opening Mail the In folder was selected, when I selected Junk, again, it locks up Mail and I can't select them to delete them?
    Anyone know how I can delete these Junk mails from my Junk folder without having to open Mail to do it as it would appear this will be the only solution to the problem.

    Hi Nigel
    If you hold the Shift key when opening the mail app, it will start up without any folders selected & no emails showing. Hopefully this will enable you to start Mail ok.
    Then from the Mail menus - choose Mailbox-Erase Junk Mail . The problem mail should now be in the trash. If there's nothing you want to retain from the Trash, you should now choose Mailbox- Erase Deleted Messages....
    If you need to double-check the Trash for anything you might want to retain, then view the Trash folder first, before using Erase Junk Mail & move anything you wish to keep to another folder.
    The shift key starts Mail in a sort of Safe mode.

  • HT5631 how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

    how do I verify my apple id? I can't sign in to it in mail and I can't make a new one because it just will not process I'm trying to set up iCloud between iPad and iPhone and having ALOT of difficulty pleAse help need it done by later on today!!!!!

    In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified.  To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link.  Make sure you are check the spam/junk folder as well as the inbox.  If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

Maybe you are looking for

  • Dont work button to lock

    Después de instalar ios 4.2 en el iphone no me funciona el boton de bloqueo

  • Detected problem with the audio configuration

    Hi guys, can anyone help me with this problem? i really have no idea how this error occured. Coz i didnt do anything with the audio configuration. I worked well before i updated the iTunes. The error is: "The iTunes cannot run because it has detected

  • Digi@nywhere A/D

    I've just installed a Digi@nywhere A/D in a Dell GX270 2.6GHz w/2GB RAM, 3DForce FX-5200 AGP card and on-board sound.  During the setup the TotalMedia application under analog TV shows the sound card options Audio Pin Source and SoundMax Digital Audi

  • SCCM 2012 R2 CU2 Can't Edit WMI Query Code in SCCM Reports

    I built a new SCCM 2012 R2 CU2 suite on Server 2012 R2. This also uses SQL 2012 SP1 CU6. This suite has 4 servers: site server, two for WSUS and secondary DPs, and SQL. This problem is true for the built in reports and my custom reports. Our SQL guy

  • Implementation Of HTML 4.2 Tags in JEditorPane

    I am trying to make HTML editor in Java Swings to support all the Tags Of HTML 4.0.1 The problem is that HTML package of Java does not support additional HTML 4.0.1 Tags over HTML 3.2 (which are 24 in Nos.) so we have to render them by coding Java /