So Confused with no audio!!!

OK. All I want to do is make a simple video with an intro splash screen, add a vignette, and change the lighting a bit--pretty simple, eh? But I cant get the audio! (I have checkedt out http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7ec9 a.html and http://www.video2brain.com/en/videos-1246.htm?auto_play=1#/?video_id=124   , btw) Ive done the RAM preview and it does its thing. I noticed a green bar start to fill beneath the video but it stops after 45s then it plays great but just loops those few seconds. Now when I press the decimal point key it plays the whole thing except the video as described in the links above. I noticed it stops if I click anywhere on the screen. I was hoping it would continue playing until I stop it. If I want to add sound to a spash screen , say curtains opening, how can adjust the sound timing to the spalsh screen for example? Can someone help please?

@ Rick: I thought I checked off the sound output next to Audio Output. No,
wait . . .I know I did. Do you think that after trying now for two days I
might have somehow "made Movie" before checking off sound and there after
been trying to make movie with a file that was saved with now sound?  I
have done so much on this that I dont know if I'll Remember my steps. Also,
You mentioned FAQ. I found
http://www.video2brain.com/en/videos-1251.htm?auto_play=1 I did as
suggested except for the output template. So where have I gone wrong? I
noticed there are about 20 FAQ (
http://forums.adobe.com/community/aftereffects_general_discussion/faq) Are
there more sources for questions I might have?  I dont
want another Jack to say " do a search". Duh!!! <End Sarcasm

Similar Messages

  • New bug in 8.02 - regions confused with each other

    So, I just updated to 8.02, and loaded up a recent project that was half finished (bad idea).
    Now I have some strange bugs going on that I never had before, and they are basic issues.
    My audio regions keep getting confused with each other.
    I have an audio region that I can't open in the sample editor. When I double click on it, the sample editor will bring up the last region I edited, not the new one. I've re-named the region, deleted it and re-added it to the arrange window, but this region will not open in the sample editor.
    I can see it in my media bin, and preview it there, and it plays in my arrangement no problem, but I can't get it to open in the sample editor. In fact sometimes when I click on it, with the media window open, I can see another sample being 'selected' in the media window instead of the proper audio region.
    Scott

    finally i find someone else with the same prob, o already post into apple.com too
    yes here the same, bug new in 8.0.1, cause on logic 8.0.0 all works fine (except some click noise when you pre-listen a file in autoloop)
    however here what i can say to you (it's 3 days i'm studyng this cause i make a massive use of ultrabeat)
    - no matter both power pc / intel soffer of this bug
    - i try to update to leopard from my 10.4.11 (same bug) tryin a new os installation (same bug), tryn without audio card and driver (same bug)
    so i really don't know how to solve it, cause there are only few people that have this problem
    big mistake and big mistery

  • Variant playlist with alternate audio in HLS

    How do you play a video with alternate audio tracks on Safari/Quicktime player?
    I'm using the Set level manifest as mentioned here : http://tools.ietf.org/html/draft-pantos-http-live-streaming-07#section-8.7
    However, only the default audio stream plays. How does not select another audio stream?
    Thanks,
    Apurva

    I'm having the exact same problem... So confused... Why would it have that option if it doesnt do anything? I used Handbrake as well. The 2 audio tracks show up on Quicktime and iTunes, but I cant use em when theyre on my iPod. Please help

  • Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?

    Is there a way to create a project with custom audio settings that are NOT only "Stereo" or "Surround"?
    Thanks!
    -Adrian

    the old apps are on my computer but they have had upgrades since they were put on the ipod originally.  you think you would get a warning about this when you restored. I was not worried about losing the progress of the apps but i would have been worried about the app it self!!!!!

  • Can any one help me with CD/Audio disc playback problem on media center m8200n running Windows Vista

    I have HP Media Center m8200n Dest top running WINDOWS VISTA HOME PREMIUM 32 BIT edition.It  has MEDIA CENTER and MEDIA PLAYER. I experience problems with the computer being able to play CD music discs.  What happens is that the Disc will play only for 63 seconds exactly and then stop playing the track, the player will then skip tracks, settle on another one, play it for a few moments and then skip to the end and then play nothing. It gives me an error message that it cannot read the disc.  This happens with any and every standard store bought CD new or used. These CDs also do play on my laptop running basically same operating system.  This happens whether I trying to Play a disc or burn the disc to the hard drive.  The drives work great though as they do play DATA discs all the way through. MP3 discs play fine.  It also plays the DVD movies with no problem. Windows media player doesn't make it work, also installed VLC player and REALPLAYER to try some other players and they also don't work for music, only DVDs. They all only produce 63 seconds of music play back  from a disc. I've already tried Changing ENHANCEMENTS, UPDATING DRIVERS, UNINSTALLING THE DISC DRIVE and then re-installing back into WINDOWS but none of that helped. SYSTEM came with the integrated REALTEK HIGH DEFINITION AUDIO on the mother boad for multi channel playback options and I've downloaded those updated drivers again but that doesn't do anything.  Thinking it might be a hardware drive problem I purchased a new LG BLU-RAY DRIVE/BURNER super multi drive which plays fantastic for any video format from Blu-Ray to regular DVD format with the Power DVD software but the machine is causing even this new drive to have the same problem with the audio and it cuts out playing the audio disc within the same 63 seconds running audio disc. . There seems to be a software glitch and I'm wondering if you can help.  Also the sound card seems to work perfectly fine. I downloaded I-Tunes and copied over audio files to the computer via my flash drive and when I play those files from the hard drive, or even the sample windows media files which reside on the hard drive in MY MUSIC, all files play through perfectly, fully, and with great sound. Audio out jacks in back of computer work fine as also does the front head phone jacks upfront. Something in the software when playing a audio disc/file through the dic drives???? I've got hundreds of CD and it's a bummer not beng able to lay them through the system. Does anyone think moving from VISTA PREMIUM to a upgraded version like ULTIMATE or even going up to Windows 7 might solve problem??? What about the 32 bit verses 64 bit editions??? My system should be able to run in the 64 bit frame work also. THANK YOU in advance!!!

    Hi,
    All dimms work individually?  Did you run a bootable memory diagnostic to determine the reliability? Did you run a diagnostic on the hard drive?  I believe that your PC came with PC Doctor and that you can create a bootable diagnostic disk. Did you create that disk?  Be sure to purchase memory dimms from a manufacturer that will stand behind their product with a guarantee such as Crucial, Corsair or Kingston. Buy directly from the manufacturer and they will stand behind the guarantee. Be sure that all of the dimms are identical. Use CPU-Z to determine that the specifications are indeed identical.
    You have some options to consider once you can stablize your PC for updating the BIOS.
    Locate a hard drive and use the HP external recovery media to build a VISTA system. -- safest method
    Use a VISTA repair disk and at the command prompt try executing the HP BIOS update (Admin). -- safe
    Try a bootable BIOS update process as suggested at this site. --  less safe but doable
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • I just moved my itunes library from a win 7 computer to a win 8.1 computer. Getting an error message "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. Can't play CDs or get audio file from web!

    Help! I just moved my itunes library from a Win 7 computer to a new Win 8.1 computer following the instructions on the itunes website. Everything is good except I'm getting an error message on the Win 8 computer if I try to play a CD or get an audio file off of the internet. I get an error message that says "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly. I don't know where to look for or fix the audio configuration on the win 8 computer. As far as I can tell the iTunes configuration looks the same as on the other computers in the house. At this point I don't dare plug my ipod touch into the Win 8 computer for fear it will get messed up.

    I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
    iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
    However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
    To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
    However, I would also like to rent movie's from iTunes, 
    Would be great if iTunes would let you choose the output device, too, like most other applications using sound  from Skype to Windows Media Player,...

  • I down loaded ios7 and now I'm having trouble with my audio on Skype, does anyone knows how to fix it? Please help!

    WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...

    You can try removing app then reinstalling. If that doesn't work
    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • Export QuickTime file with new audio and maintain the file size and quality as the original.

    I shot some footage for a client yesterday and ran into an issue. To make a long story short I have QuickTime mov files shot with my Panasonic GH4 that have a buzzing sound in the audio track. I have clean audio from a recorder that can be sync'd. Is there a way for me to do this for the client and deliver them as the same QuickTime file but with the clean audio and keep the file size close to the original and not have quality loss in the image?
    If so I will probably put all of the spanned clips together from each interview and sync the audio before delivery. I am just not sure which codec will give the client the same quality footage compared to the originals and not have a massive difference in the overall file size. They did request that they be Quicktime MOV files though so that is a must.
    I don't see this as an option in the codecs in the export settings in PP, but is there a way to export as ProRes or another MAC native codec that will save them from having to convert it on their end? I am on a PC with Adobe CS5.5 so I am not too familiar with MACs, but from what I understand they would need to convert the files if I sent them straight out of the camera.
    I found some related search results for this but they pertained to "Best quality" for export. I am not sure how the varying options work but I don't want to create files that are considerably larger, just not less quality.
    If anyone has experience with this it would be greatly appreciated.
    Thanks,
    Cole

    Here's the workflow: I imported the video footage into iMovie '08 and did my edits. Then I exported it (share) to my desktop with compression set @ 740 X 480. Then I used QuickTime Pro to fix the audio track. The file plays perfectly with both audio tracks working. It's a QuickTime file (.mov).
    I hope this jars any replies as to why the file when uploaded to my iWeb gallery drops the second audio track.
    Hmm,
    Jack

  • How do I import AVI video with stereo audio (and keep it that way)?

    Today I just discovered that all the AVI video with stereo audio I've ever imported into a Premiere Pro CS6 project has been mysteriously converted to mono. And I can't find any import setting anywhere that enable me to change this.
    Here's the deal...
    I've have an AVI file with stereo audio (the file is actually a stereo sound test that I downloaded to prove that I wasn't imagining things). On my hard drive, I right-click and view the properties:
    Video
    Length: 00:00:36
    Frame width: 320
    Frame height: 240
    Frame rate: 25 frames/second
    Audio
    Bit rate: 128kbps
    Channels: 2 (stereo)
    Audio sample rate: 44 kHz
    I click on it to play and listen with headphones--everything is playing in the correct part of the stereo spectrum. Then, I import it to Premiere, click the file name in the left content menu, and check the properties, suddenly they read:
    Type: AVI Movie
    File Size: 1.1 MB
    Image Size: 320 x 240
    Frame Rate: 25.00
    Source Audio Format: 11025 Hz - 16 bit - Mono
    Project Audio Format: 11025 Hz - 32 bit floating point - Mono
    Total Duration: 00:00:36:15
    Pixel Aspect Ratio: 1.0
    Sure enough, I drag it into the sequence, listen to it, and it's indeed playing mono. Outside of Premiere, the original source file still reads and plays correctly with stereo sound.
    When I import stereo WAVs and MP3s, it keeps the original stereo channels without me having to do anything special. I even just imported the same exact file as a MOV with stereo audio, and it showed up in Premiere as:
    Source Audio Format: 44100 Hz - 16 bit - Stereo
    Project Audio Format: 44100 Hz - 32 bit floating point - Stereo
    What is going on here with AVIs? Am I doing something wrong? Are there settings I'm missing somewhere?
    (And before anyone suggests I only use MOV in the future... that's not exactly the answer I'm looking for.)

    Thank you for that info.
    For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
    There are two issues with that file:
    The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
    Good luck,
    Hunt

  • I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio t

    I need to output a PAL HDV project from FCP as a PAL DV file with 4 audio tracks - specifically one stereo pair to be t1&t3, the other stereo pair to be t2&t4. This is the standard way requested by an international distributor of tv programmes. I understand how to set the sequence in FCP to output 4 audio tracks - either 2 stereo pairs (1&2, + 3&4), or 4 discrete tracks. But how do I then output this as a QT file?
    The manual tells me that to export multiple audio tracks, File>Export>QT Movie has it's Config pop-up menu in the Audio Settings area of the General tab of the Sequence Settings. Well, that's set for 4 discrete channels, but the QT export settings only allow for 2 mono or 1 stereo output, and that's what I get when I try it. What it says in the manual just doesn't happen.
    Exporting via Compressor, on the other hand, has an abundance of choices of 4-track outputs, none of which are labelled as anything resembling 'discrete'. Would any of those 4.0 settings suffice? Or am I likely to get myself into difficulties further down the line? As I am monitoring for this task on a 2-track audio system, I cannot confirm exactly what I am getting when I use any of those settings.
    Any advice would be greatly appreciated!
    John

    Call me naive, but I've not heard of splitting the stereo pairs like this before.
    What broadcaster? (perhaps one of our EU regulars will drop in...)
    You can do all sorts of pairing but it is coincident tracks pairing- eg 1/2 + 3/4
    Sorry I can't offer anything.
    x

  • Error message after upgrade to iTunes 11: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point my PC running XP loses all audio.

    Several attempts to upgrade to iTunes 11 have failed.  After an upgrade to 11 the error message reads: "iTunes has detected a problem with your audio configuration. Audio/Video playback may not operate properly."  At this point--after the upgrade to iTunes 11--my PC running Windows XP loses audio playback for all functions--in iTunes, in the browser and the volume icon disappears from the System Tray.  Only by removing iTunes 11, and then using System Restore to turn back the OS settings can I return the PC to normal functioning.
    I did that.  I reinstalled iTunes 10.5.  Everything seemed fine, but when I try to plug in and copy a CD to my iPhone 4S an error message reads roughly: 'iPhone 4S requires iTunes 10.5 or higher to work.'
    What might be the problem with my audio configuration?
    Why doesn't my iPhone 4S work with iTunes 10.5?  It used to work with iTunes 10.5.
    Please advise.
    ep

    This forum is for questions about iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
    Regards.

  • When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem each and every earphone am inserting goes unusable

    When I connect my I pod shuffle to USB it shows an error message - " I Tunes has deducted a problem with your audio configuration. Audio/Video playback may not operate properly" due to this problem whenever i connect  earphone each and every earphone gets un usable. Already made a factory reset. please arrange for a rectification.. :'(

    Hi Ganeshpandianm,
    Welcome to the Support Communities!
    The article below may be able to help you with this issue.
    Click on the link to see more details and screenshots. 
    iTunes for Windows: iTunes cannot run because it detects an issue with QuickTime
    http://support.apple.com/kb/TS1371?viewlocale=en_US
    "iTunes cannot run because it has detected a problem with your audio configuration"
    Cheers,
    - Judy

  • On my Ipod touch 4g all of a sudden all my music sounds as if they were slowed down. What's wrong with my audio?

    On my Ipod touch 4g all of a sudden all my music sounds as if they were slowed down. What's wrong with my audio?

    You need to turn off the Zoom accessibility feature.  Tap the screen twice with three fingers to get to normal screen. Then go to Settings>General>Accessibility and turn Zoom off.  You can also do that by connect the computer to iTunes and going to the Summary pane for the iPod and go to Configure Universal Access.
    For more info see:
    iPhone and iPod touch: Home screen icons are magnified or large

  • Playlists don't work with separate audio clips

    I have a timeline with 8 different clips and chapter playlists set up to play each clip individually and to play them in pairs.  This works fine.
    But when I add audio to the timeline it goes wrong. I have 8 different audio clips that match up with the video clips.  If I view the timeline itself, everything is OK.  If I view the first clip's playlist (with the first audio clip) it also works OK.  But if I view any of the other playlists, the DVD (and previewer) return me back to the menu as soon as the audio track starts (this is the end action). If I delete any of the audio tracks, the playlists for those videos work fine again.
    I also see similar behaviour on another timeline where a second audio clip starts midway: the chapter immediately before the new audio track is skipped in a playlist and the DVD plays the subsequent chapter (there are many chapters on that timeline).
    The only solution I've come up with is to burn a DVD with no audio, rip the video, line up the audio tracks I want to use with the video, export them all in one big file and then add that single clip into Encore.  It's not really something I want to do, to be honest.
    Is there any explanation for this strange behaviour, or is it another bug?
    Thanks for any help or pointers towards sorting this out.

    I'm with Neil on the 8 separate Timelines. There are pitfalls to grouping multiple Clips onto one Timeline, and even an Audio Unit's difference in Duration can cause issues.
    If you do go with the discrete Timelines workflow, you'll just do Playlists, and not Chapter Playlists instead.
    Good luck,
    Hunt

  • What type of connector do I need from my Macbook Pro Retina laptop for sound out to audio speakers with regular audio input jacks?

    I am wanting to use regular audio speakers with traditional audio input jacks to serve as output speakers on my Macbook Pro Retina display laptop. What type of cable would I need to connect?

    http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP

Maybe you are looking for