So did I buy the gigabot model?
I just bought an AEBS. Model is MA073X/A Model No: A1143.
The very knowledgable guys at the Hurstville Apple Centre were clueless as to whether it is the gigabot model or not.
I've just arrived home and discovered that if I ordered online at the Apple Store I'd be buying the MB053X/A.
I am unable to connect up the AEBS right now to test.
So what exactly did I just buy. Can anyone help please!
Lucion, Welcome to the discussion area!
Sorry but the MA073LL/A only has 10/100 Mbps Ethernet.
The other model is the one with Gigabit Ethernet.
Similar Messages
-
Did you buy the Applecare for iPad?
Did you buy the applecare with your new iPad or planning to buy it? It says that for $99.99 CAN, it extends the warranty and technical support to 2 years. Plus it covers hardware damage but you have to pay extra $49.00 for service. I broke the glass from my iPhone before 1 day after I got it, Rogers told me that it will cost $400 for the repair, so I had to find a local person to repair it and it costs me $120.00 but I see some dusts trap inside it. Do you think for an extra $100, this is worthed?
There are two kinds of apple care.
Regular Apple care that has been for sale up to this last week and Apple Care +
Regular Apple Care
Can buy anytime in the first year's manufacturer's warranty
Applies only to manufacturer's defects, does NOT cover accidental damage
Any unauthorized repairs will void it
Apple Care +
Must be bought in the first 30 days after purchase
(may/may not apply to the iPad 3 only)
Covers up to 2 instances of accidental damage with a fee of $49 per incident
I presume that any unauthorized repairs will void it
What you got with yours was regular Apple Care, which infamously did not cover screen breakage. Most people were quoted repair prices starting at $269 and up depending on model. And really it wasn't as much a repair as it was you being allowed to purchase a refurbished device to replace your broken one with.
Apple Care Plus means that if you break your screen, you have up to 2 chances to only pay $49 for a replacement/Repair (no idea if they do the refurb swap or if they really fix it.....with the program in play only a week or so there's no real data available)
I personally got the regular Apple Care. Apple Care + didn't exist a few months ago. I hadn't originally bought it, but after my new iPad's 30 pin port corked it on me (best buy replaced it) I realized that there are certainly batches out there with manufacturer's defects in them and the $99 was a relatively cheap insurance policy against me getting another device with errors in it. (my theory.....some factories aren't as good as others or get batches of bad pieces and parts, so you end up with some out there with errors in them)
In your case, regular Apple Care wouldn't have helped you since it doesn't cover damage. however, Depending on how expensive the Care + is, if I had a new iPad I'd seriously consider it. -
I am planning to buy an Iphone 5s in October, but I have to make sure that the model will work with the LTE services we have in Brazil. I know that Apple made 2 Models that support Band 7. See Below.
Model A1457*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 2, 3, 5, 7, 8, 20)
Model A1530*: UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); FDD-LTE (Bands 1, 2, 3, 5, 7, 8, 20); TD-LTE (Bands 38, 39, 40)
How can I make sure I will buy the correct model through the internet ? Can Apple change the Iphone In case they send the model that does not support LTE services in Brazil ?
Thanks,JP Ellery wrote:
The models that will work with brazilian LTE networks are:
A1507 and A1529 (iPhone 5c)
A1457 and A1530 (iPhone 5s)
JP
Have you personally tried those models with Brazilian LTE networks? Do they work? If so, fine. If not, then besides that, there is the problem of the warranty which is not international. The user will have to return the phone back to the country of purchase for both warranty and out of warranty service. So what might seem cheaper at first glance might not be in the end.
Anyways, it your money and the OP's should he want to go ahead with your recommendation. -
I bought elements 13 online. I was able to download it but not open it. I looked for a mac version before I bought and did not see one. Did I buy the wrong version?
Amyrice did you purchase Photoshop Elements 13 from Adobe directly? If so then you may have a multi platform license. You can find your registered serial number under your account at http://www.adobe.com/. Additional details on how to locate your registered serial number can be found at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you need to download the installation files for Mac OS then you can download the trial from Adobe - Download free trial version Adobe Photoshop Elements 13 | Adobe. -
I have FCPX 10.0.0 I'm trying to install updates. It's not allowing me to do this. The App Store says I did not buy the FCPX from the App store. Which I did. Can anyone help me figure out how to update my FCPX?
Hi , a similar thing happened to me with another piece of software .. it was then that I realized I have two accounts .. I have no recollection of setting up two but it seems I did somewhere along the line.. I have jimkells and the second is [email protected] .. so when I logged in as the other acc there it was and I was able to update .. could it be FCPX was bought on another user account ??
Jim -
Did I buy the wrong HDTV?
Hello,
Did I buy the wrong HTDV for my Mac mini media center?
My 2009 Mac mini is connected to a Panasonic 32" 720p HDTV via HDMI.
(I'm using a Mini DisplayPort to HDMI Adapter)
Several issues have arisen:
1) black bars at the top and bottom of the screen when I watch Netflix "watch instantly" movies on it.
2) The menubar of my Mac computer screen is not visible (image chopped off on all four sides).
3) The Mac mini cannot connect to the Internet via Airport when it's attached to the HDTV! (ethernet connection is A-OK)
I've tried playing around with the settings for both the Mac Mini (which recognizes the Panasonic) and the various menu options on the TV but no success.
Maybe I should have broke down and bought a 1080p instead?
Any help would be much-o appreciated!
MikeI guess I am just concerned as there seems to be so many networks (routers) around here, there is always 7 or 8 connections available on the list of avail networks and I am just concerned about that one machine connecting to the wrong router when it is booted up ....
when I was using the wrt54g, and it always showed "Excellent" and the others always showed poor to very poor (1 or 2 bars) ,,,,,,,
but now with the new router always showing just one or two bars as well on that one machine .... I worry that it may connect to the wrong thing sometime. This wouldn't be such a worry for me IF there were simply an option to set "Connect to this network ONLY" on the nic,
but there isn't, just a "Connect to preffered network IF in range" ..........
Not that it matters here is the whole reason I have these machines and routers on a network is because I am severely disabled with M.S. and getting up and down steps to all my familys machines isn't so easy, and that one machine about 75 feet from me is impossible. So I have them all networked thru the router, and I use a remote control program (called Radmin) to access the various machines from this one laptop.
I am starting to wonder if the fact that nothing will work when this router is on 20mhz bandwith at all, is indicative of some sort of problem with the router itself? That is funny as the wrt54g was 20mhz only I beleive, and it worked perfectly! -
I want to buy the iphone model A1533
I want to buy the iPhone 5s model is A1533 (GSM) will it work in the Czech Republic? I have T-mobile here but want to also use it in the states when I return, not with t-mobile.
ChuckAssuming you want to use a local carrier's sim in the Czech Rep
It should work on 3G but not 4G in Europe as long as you follow ethmoid's advice and buy only from Apple
When you return to the US then you just have a US model iPhone with no carrier lock -
Did I just waste $30 buying something called "Logos for Adobe Illustrator?" Do I need something else, some other program, to make it work?
Jill,
Presumably, you can create a new document, then File>Place one the templates, then edit it or whatever.
But maybe you should click the Logos for Adobe Illustrator® Support link here:
Mac App Store - Logos for Adobe Illustrator®
Whether it is a waste depends on the quality of the templates and the extent to which you wish to create your own one and only artwork. -
How much is the G5 worth? The one from 2005.
The Apple Store will offer to recycle it for free, you are better off selling it on ebay or elsewhere, I have seen decent looking ones go from $80-$250 here in Australia.
You are looking at $1000 + to get a new one -
Did I buy the wrong wireless NIC card?
Hello all .... I have a small home network consisting of 3 laptops and 2 desktops ... They were all connected via a WRT54G router with the one desktop farthest away using a wmp11 wireless NIC ..... this particular desktop is approx 75 - 100 ft away from the router ... so far there's been no problems, but that one machine always showed EXCELLENT signal strength (when you'd over the cursor over the little wireless icon in the systray) ....
For some unexplained reason (cause I'm dumb) I decided to purchase a new router, I got the Linksys WRT160N ..... well the machine with the wmp11 wouldn't even boot up any more, let alone communicate with the router. So I ordered a new wireless NIC for it, a wmp600N...which I installed and now at least that machine boots! The machine does connect to my network, and appears to run on the internet fine, however my question is now whenever you check that machines wireless status, it always says signal strengt is "Poor" or "Very Poor". I see now (I don't know why I didn't notice it before) that there is yet another wireless NIC for that router, and am now wondering if I bought the wrong nic card. I'm just wondering why my signal went from always showing EXCELLENT to now showing POOR all the time.
When I first ordered this router off the Linksys site, I remember distinctly specify "RANGE" as one of my requirements, yet when I received it from Linksys the box was clearly marked it was NOT for range.... so I am sorta confused.I guess I am just concerned as there seems to be so many networks (routers) around here, there is always 7 or 8 connections available on the list of avail networks and I am just concerned about that one machine connecting to the wrong router when it is booted up ....
when I was using the wrt54g, and it always showed "Excellent" and the others always showed poor to very poor (1 or 2 bars) ,,,,,,,
but now with the new router always showing just one or two bars as well on that one machine .... I worry that it may connect to the wrong thing sometime. This wouldn't be such a worry for me IF there were simply an option to set "Connect to this network ONLY" on the nic,
but there isn't, just a "Connect to preffered network IF in range" ..........
Not that it matters here is the whole reason I have these machines and routers on a network is because I am severely disabled with M.S. and getting up and down steps to all my familys machines isn't so easy, and that one machine about 75 feet from me is impossible. So I have them all networked thru the router, and I use a remote control program (called Radmin) to access the various machines from this one laptop.
I am starting to wonder if the fact that nothing will work when this router is on 20mhz bandwith at all, is indicative of some sort of problem with the router itself? That is funny as the wrt54g was 20mhz only I beleive, and it worked perfectly! -
Why did I buy the game gold he did not give me posting
my acc : yuenbirdnest (at) gmail (Dot) com
<Edited by Host>I'm not sure what you're asking - if you have a problem with an app, you need to contact the app developer. And putting your email in a public forum like this is not a good idea, as it wont' get you any help but might get fed into phishing engines.
-
Did I buy the right thing!!
Hi,
After much confusion about what includes what on the Adobe
website I finally decided on Creative Suite 4 Web Premium. I have
been using FrontPage 2003 and want to start using Dreamweaver. It's
a fun thing for me and helps keep my mind active while I make a few
dollars as well.
Now I have the opportunity to do a bit of freelance work
making up adds for a couple of local newspapers.
Problem: Should I have spent the few extra dollars to get
Creative Suite 4 Design Premium which includes InDesign CS4 or can
I make up the newspaper adds in Photoshop CS4. I am guessing that I
should have spent the extra money in the first place because to get
InDesign on it's own costs more than I am prepared to pay, and is
there an alternative.
At the moment if I never go to the Adobe site again it will
be too soon as I find it totally confusing and frustrating - or is
that just me!!!
Cheers
JohnWhat file format does the newspaper want?
What file format are the original source files going to be
in?
As a rough guess- between Photoshop and Acrobat pro that are
in the package
you bought, you can turn in files they can use if it's a
graphic design job.
Do the design in Photoshop and then create a pdf.
There's four different product groupings.
Which one to pick depends on which applications you need.
http://www.adobe.com/products/creativesuite/
Design Premium
Web Premium
Production Premium
Master Collection
Adobe Creative Suite 4 Design Premium
InDesign CS4
Photoshop CS4 Extended
Illustrator CS4
Flash CS4 Professional
Dreamweaver CS4
Fireworks CS4
Acrobat 9 Pro
Adobe Bridge CS4
Adobe Device Central CS4
Version Cue CS4
Adobe Creative Suite 4 Web Premium
Dreamweaver CS4
Flash CS4 Professional
Photoshop CS4 Extended
Illustrator CS4
Fireworks CS4
Acrobat 9 Pro
Soundbooth CS4
Contribute CS4
Adobe Bridge CS4
Adobe Device Central CS4
Version Cue CS4
Adobe Creative Suite 4 Production Premium
After Effects CS4
Adobe Premiere Pro CS4
Photoshop CS4 Extended
Flash CS4 Professional
Illustrator CS4
Soundbooth CS4
Adobe OnLocation CS4
Encore CS4
Adobe Bridge CS4
Adobe Device Central CS4
Dynamic Link
Adobe Creative Suite 4 Master Collection
InDesign CS4
Photoshop CS4 Extended
Illustrator CS4
Acrobat 9 Pro
Flash CS4 Professional
Dreamweaver CS4
Fireworks CS4
Contribute CS4
After Effects CS4
Adobe Premiere Pro CS4
Soundbooth CS4
Adobe OnLocation CS4
Encore CS4
Adobe Bridge CS4
Adobe Device Central CS4
Dynamic Link
Version Cue CS4
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
TS1702 I did not buy the cliff ap but was charged.
I was charged an ap that I don,t even remember ordering it. What do i do.
Hi ...
Help here > How to report an issue with Your iTunes Store purchase -
How do I create bookmarks? Did I buy the wrong software?
How do I create bookmarks?
Hi marchiondo,
To create bookmarks in a PDF, you need Acrobat. If you don't have Acrobat, feel free to try it for 30 days. See www.adobe.com/products/acrobat.html for more information.
Best,
Sara -
I brought a Mac book Air this September. However I did not buy the apps pages, numbers and keynote. I was
Delighted to hear these apps are free - however when I tried to download them from the
App Store - I still find the buy button with the price.
So will these apps be freeHello there, Anilkr.
The following Marketing Page reviews the requirements for upgrading those Applications for free:
Apple - Up-to-Date Program for Pages, Numbers, and Keynote
http://www.apple.com/creativity-apps/mac/up-to-date/
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro
Maybe you are looking for
-
Add & use custom jars in "Java embedding" component
I need to generate pdf file in process. So I included "Java embedding" component, and write my code. For clarity example: com.itextpdf.text.Document document = new com.itextpdf.text.Document( com.itextpdf.text.PageSize.A4, 50, 50
-
ITunes says it cannot back up my phone to my computer
because there is not enough free space. My HD says it has 209GB Free Space. Whassup with that?
-
How to display various content in a TableColumn
Hello, I would like to display in one column only the label of an object, and in the second column, based on the property of the object displayed in the first column, display a Text Field or a ChoiceBox. Is it possible with Cell Factories? If not, wh
-
My Microsoft Word inserts a page break when I hit return
If I press delete to remove the page break, it brings the sentence back into the previous paragraph. If I hit return again to make the sentence into a new paragraph, as it is supposed to be, the computer/program inserts a page break, vaulting me ont
-
Failed to invoke startup class "SOAStartupClass"
Hi all, 1. WLS domain (wls 10.3.5 on Linux, Middleware 11.1.1.5.0) is extended with OIM and SOA Suite. 2. AdminServer is started by wlst.sh script, node manager runs with StartScriptEnabled=true wls_soa1 is up and running, but soa-infra fails to star