SO document flow not updated with PR no created

Hi All,
A Purchase Requisitions is created from SO for a line item, i can see the PR generated in report ME5A but not in document flow. Is it a standard behavior or i'm missing something ??
Regards
Abhilash

Purchase requisitions are not updated in the document flow, just use SE16 and look at document flow table VBFA. it has 2 fields for document category VBTYP_V and VBTYP_N . If you use F4 on this field then you can see that the PR is not among the possible documents.
Use the status overview button instead and you can see the PR

Similar Messages

  • Revenue recongnized documents are not updated with trading partners

    Hi SAP  Gurus
    Revenue recongnized documents are not updated with trading partners
    Can any body help on this as it is priority issue
    Regards,
    suchithra

    You might try looking/posting here.
    Microsoft Support – Office for Mac
    Microsoft Support – Office for Mac (2)

  • Document flow not updated for Package Quote

    Hi
    I am creating a Packaged Quotation from Opportunity. After creation of document I see that document flow gets updated in Quotation but in an Opportunity it is not updated (in UI). Whereas in GUI it is being shown correctly. Please help me in resolving this.
    Thanks & Regards
    Hits

    not required

  • Document Flow not updated in CRM from ECC

    Hi Experts,
    We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?

    Hi,
    Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
    Rgds,
    -Sweta

  • Document Flow not updated using BAPI_GOODSMVT_CREATE

    Hi Experts,
    I am using BAPI_GOODSMVT_CREATE for doing PGR of an inbound delivery.
    Material Document(mblnr) is getting populated but Document Flow of that inbound delivery is not getting updated.Its status is Open.
    Can anyone knows how Document Flow can be updated using BAPI_GOODSMVT_CREATE??
    Regards,
    Puja.

    Hello Puja,
    Goto transaction SPRO, Go to Logistics Execution - Shipping - Basic shipping Functions - Configure Clobal Shipping Data, In this put a tick on Document Flow Update.
    Also refer to the below OSS note.
    http://service.sap.com/sap/support/notes/199703
    Regards,
    Thanga

  • Document flow not updated?

    I have created a inter company Schedule agreement . Then supplying plant have done delivery and PGI against this after doing picking and transfer Order .
    Now I am trying to do MIGO at receiving plant. While trying to save it's giving an warning message ''Delivery flow for delivery cannot be update'' .
    1. Please expalin why document flow is not updated?
    2. What I should do for updating the document flow?
    Please advise.
    Thanks

    Thanks Warwick. But can you please explain the logic of this message.
    Suppose I need document flow to be updated then what I can do.
    Please advise.
    thanks

  • Documents that are park in FBV0 do not update with the new user name when

    Hi,
         I need to find out why documents that are park in FBV0 do not update with the new user name when any changes are made.  Also when we park using MIR7 and make changes to the documents at a later time the document updates with the new users name.
    Requesting you to please suggest what could be the reason.
    Earliest reply will be highly appreciated,
    With regards,
    Rj

    Hi,
        I have checked this in system. I posted one Parked invoice using T.code FV60 and there i appeared my name because i created. But after some time one of my collegue changed the reference and text field with his login i.d. But still in the invoice it is showing as my name whereas if we go to the environmnet, there in the changes we can see what are the changes done and it is appearing my collegues user i.d. But in the main invoice it is still appearing my name.
    Regards,
    Rj.

  • Keynote document saved in icloud not updating with data from Numbers? is icloud the problem

    keynote document saved in icloud not updating with data from Numbers? is icloud the problem.
    If both files are held locally on the computer it looks like there is no problem however if you try and do it though icloud (ie your docs are saved on icloud) you dont get the "source" oprion besides the graph etc. Is this a but or a broken function due to the new implementation of icloud.

    Hi sebnor31,
    This is Visual C# forum, but your question seems not related to Visual C# language itself. It most likely related to the bluetooth message transaction protocal or with the device itself.
    I'll move your question to [where is this forum for...] forum where the morderator may direct you to the correct forum.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to proceed in change document are not updating in CDHD, CDPOS tables

    Hi all,
    This is a question related to Change document.
    I created one custom Change document object ‘ZBUDGETS’.
    As I am trying to place a trigger on FMIT (Total Funds Management) table I created a Change document object ‘ZBUDGETS’.
    I included some of the authorized fields from FMIT table on which we placed the trigger.
    And of course all those fields are change document enabled in the data element level. I generation of the update program was completed. And I got the function module zbudgets_write_document along with some include programs and structure.
    Everything is fine, But i am unable to get this change document generated information to these tables are CDHDR and CDPOS.
    the problem is when I make any expenditure like PO Posting, it will be logging in the FMIT table and the respective fields also updating. With this the Change document object should trigger and it should send the record in CDHDR and CDPOS tables. This is not happening. If the records are getting updated in the CDHDR and CDPOS tables I can use those include programs and function modules in my program to retrieve the changes in FMIT table.
    Since I am unable to proceed further since the documents are not updating in CDHDR and CDPOS tables.
    Prabhakar

    CDHDR and CDPOS will not be populated with entries only by creating the change document object.Change documents will be written to CDHDR and CDPOS tables only if the function zbudgets_write_document is called in the transaction which updates FMIT.
    You need to find an use exit in the transaction updating FMIT and call the function zbudgets_write_document in that exit.
    Refer the below link http://help.sap.com/saphelp_47x200/helpdata/en/2a/fa01b6493111d182b70000e829fbfe/content.htm
    -Kiran
    *Please reward useful answers

  • Follow on document details not updating in shopping cart

    Hi Experts,
    I created a shopping cart  and created PO as a follow on document  from sourcing cockpit after assigning vendor.
    but Shopping cart is not updating with follow on document (PO)details even after running BBP_GET_STATUS_2 report also.
    Is there any other settings required to do for updating shopping cart with follow on document details.
    Thanks,
    Bhaskar.

    Hi ,
    Please check the repots ( jobs )  CLEAN_REQREQ_UP And BBP_GET_STATUS _2 are running..
    Check in RZ20 is there any error message for the follow on document.
    Thanks
    prasad.s

  • VBOF - Not updating with Maximum no of items in FI reached.

    Hi All,
    When updating the billing documents in VBOF, iam getting error (not updating) due to  Maximum no of items in FI reached message. Did you face this kind of issue, what would be the best possible solution? Is there any SAP note for this.
    Regards

    FYI
    Firstly the program for VBOF determines (depending on its parameters) the amount of billing documents. A new pricing is then carried out for these documents (with a pricing type which simply redetermines rebate conditions, that have not yet been totally calculated).
    - If the program produces a different result with regard to the rebate conditions, the rebate conditions are updated.
    - If these changes affect accruals, an additional accounting document is created, which is adapted to accruals.
    - If errors occur during pricing, the billing document cannot be updated (see error log).
    - If the net value of a billing document changes (for example, because a rebate condition has been created retroactively, which should not exclude a non-rebate condition), this also means that the billing document is not updated.
    In addition to that:
    What problems can occur when updating the billing documents ?
    It may be that a document cannot be updated. For example, the following errors may have occurred:
    - Pricing error
    - Billing document blocked
    - Net value of the billing document has changed
    - Error in accounting transfer
    - etc.
    In this case the error situation must first of all be rectified (e.g. correct settings) and then the update can be carried out again.
    For further details. Refer SD implementation guide/help or in transaction VBOF, click on "i" button for performence assistant
    Regards
    JP

  • Measuring point/document is not updating

    Dear all,
    I am  new in PM. I have one issue over here.Measuring point/document is not updating automatically after production order confirmation via co11n . I tried with following steps
    1) Created the equipment as (P)Production resources/tools -->created measuring point as a counter ---> maintain the usage value formula SAPF02 in the PRT tab . Unit of measurement for the characteristics and base unit of measure of material are same
    2) Then i have assigned this equipment as a PRT in the routing of material .
    3) Production order confirmation via co11n  Each unit
    Which steps i am missing. if u give me steps by steps procedure to me for counter based maintenance, its helpful for me.
    STILL not answered and no reply.
    I am waiting for reply.
    Thanks
    tarun
    Edited by: tarun on Oct 5, 2010 5:06 PM

    Hello,
    Have look this thread [Re: Auto Update of measuring point/document;
    Regards,
    Rakesh

  • Document year not updated at the time of part I Posting

    Dear Guys.,
                        At the time of part I posting  the document yaer not updated properly. this is not upodated in some times or some cases only . but it is updating correctly other times...
    but i dont know the reason why this document year was not updated.
    the field name and table tane is J_1iexchdr- DOCYR.
    Excise Transaction type is GRPO.
    because of this problem we can not able to do the invoice verification..
    REgards
    P.Anandhakumar.
    Edited by: Anandhakumar Palanisamy on Sep 3, 2009 8:47 AM

    Timing
    I am not sure what is going on behind the scenes with this web site in the past few days. One day I could not post in your thread at all. Another day
    I was receiving Inbox email notifications that were never posted in the Adobe Premiere Elements Forum or were posted several hours after I saw them
    in my Inbox email notifications. I was waiting for the problem to disappear on its own. If not, we can post in the Adobe Comments Forum to find out what
    might be going on.
    https://forums.adobe.com/community/general/forum_comments
    Yours has not been the only thread where I have had these problems.
    ATR

  • Profit center not updating with plant change

    We have an issue with the profit center not updating with change in delivering plant.
    A CSR entered a material on a sales order but the material is not extended to their location.  They select a plant to deliver the material from.  At this point the profit center fills in for that plant, from the material master. 
    The issue then is the material is not currently available at that plant so when the availability check is preformed the CSR checks for availability in another plant.  They are able to find an available item at another location so they select that location. 
    When they save the sales order the plant reflects the new delivering plant, but the profit center still reflects the first selected plant.  The profit center does not pull from the material master correctly.
    Has anyone seen this issue before and developed a solution?

    Hello Matthew
    May be you have substitution defined in CO.
    T codes 0KEM or 0KEL
    See the following OSS notes:
    167912 - Substitution call-up points for sales order/billing document
    Hope this helps.

  • Batch Characteristic not updating with result for linked MIC

    Hi,
    I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
    If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
    If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
    Can you help regards?

    Ok. I am a little bit further.
    I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
    In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
    Hope that this can help to solve my problem.
    Regards,
    René
    @ Mayank
    Above, all the master data and customizing is mentioned to transfer the result to the batch classification
    Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

Maybe you are looking for