SO field to PO field

Hi Gurus
I need to copy the material entered number in the sales order to purchase order's Vendor part number field. I made some research,but i could only find that we cant maintain copy controls b/w S.O and P.o's. Let me know if i am wrong. Do i need to use the user exit v45e001 or can i do it in any other way in the standard sap.
Need some advice.

Hi Dear,
I think the link may help u for your requirments.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/7d/0cc938e2047063e10000000a114084/frameset.htm
Ramesh
http://help.sap.com/erp2005_ehp_03/helpdata/EN/b6/aa32c459f611d2b448006094b9c9be/frameset.htm
Ramesh

Similar Messages

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • Regarding Selection Screen field making display field  in ALV report

    Hi All,
               In ALV Report,  at runtime how can i make the field as Display Field in selection screen .
    Thks & Regds
    Shailesh

    hii,
    Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
    1.demo_dynpro_modify_simple
    2.demo_dynpro_modify_screen
    if tou are using grid,u can refer to foll link
    sequencing / choosing fields in report screen at runtime,
    Display the Columns in the grid at run time
    rgrds,
    Shweta

  • Key fields and data fields in a DSO  ??

    i have a question regarding key fields and data fields in a Standard DSO...
    i am using 2 datasources to build a open sales report 2LIS_11_VASTH  and  2LIS_11_VASTI   i am pulling in data from these 2 data sources to a DSO and i am wondering what infoobjects should be in the key fields and data fields .....does this reflect back to table VBUK and VBUP tables and does the key field in the DSO have to be the key fields in VBUK and VBUP tables  ????  or what really should be included as key fields and data fields   ????  
    please help....

    If you look at the various SD tables, VBELN and POSNR are commonly used as the document number and document line item.
    For VBAP and VBUP, it's referring to the Sales Order Line Item with the columns VBELN and POSNR as the key for both tables. However, if you look at the LIPS table, which is the Delivery Line Item table, it too has VBELN and POSNR as the key. Likewise, the VTTP table, which is the Shipment Line Item table, also has VBELN and POSNR as the key.
    While using RSOSFIELDMAP as a map is a fairly good "rule of thumb", it still needs to be used with a level of skepticism.

  • Prerequsites for deciding Key fields and data fields

    Hi
    I would like to know the criteria to decide upon KEY fields and Data fields for an infoprovider.

    Hi,
    What is a Key field in a Database and How should I choose one?
    Keys are crucial to a table structure for many reasons, some of which are identified below:
    They ensure that each record in a table is precisely identified.
    They help establish and enforce various types of integrity.
    They serve to establish table relationships.
    Datafields may be Charecteristics and it may be keyfigures
    Regards,
    Marasa.

  • Key Fields and Data Fields in ODS

    Hi Guru's ,
    Can u Explain what are Key Field's and Data Field's in ODS,and How they work.
    Thanx in Advance.

    Hi Pradeep,
    An ODS’ key fields forms a unique combination of chars according to which data in the ODS will be summed up. Data fields are additional fields, chars or key figures.
    For example, you have the following key fields:
    Doc No, Doc line item (item no in the doc) and you load the following data:
    Doc# Item# Amount CALDAY
    1234  1        100       26.09.2005
    1234  1        150       27.09.2005
    1234   2        300      27.09.2005
    1235   1        400      27.09.2005
    The first two rows with the same key fields (1234-1) will be aggregated and into ODS will go amount of 250.
    What I said is true if for Amount key figure the ‘Add’ option is set.
    But if you set an ‘Overwrite’ option, then the second record will overwrite the first one and only amount of 150 will go to ODS!
    But if CALDAY is also a key field, then into ODS will go all records without any aggregation, because key fields combination is different for all records.
    So, ODS’ key fields choice and KFs settings are very important for data aggregation in the ODS.
    Best regards,
    Eugene

  • Data fields and key fields

    Hi,
    Data fields and key fields are same as Characteristcs and key figures? Or they are diffrerent?
    Thanks,
    Radha

    HI
    Key Fields =  Acts as Primary Key for The ODS like Primary of Tables in R3.
    Data fields =  Apart from Key fields We consider rest as data fields.
    Ususally we use Characteristic info Objects and Dates in Key Fields and Key figures in Data fields.
    It's decisive factor for overwriting property of ODS or DOS.
    Hope this helps.
    Regards,
    Rangzz
    Edited by: Ranganath Kodiugane on Feb 7, 2009 12:14 PM

  • Chart report Condition fields and Data fields

    Hi all,
    i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
    while adding more condition fields and data fields, i feel its not showing meaningfull data.
    can anyone explain how the condition fields and data fileds are manipulated by crystal report.
    i am using CR XI R2 Server.
    Thanks
    Padmanaban V

    i am using Crystal Report XI R2 RAS Embedded in my server.
    as we can add any number condition fields programatically using the method
    ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
    that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
    if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
    Thanks in advance
    Regards,
    Padmanaban V
    Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM

  • Identify key fields and data fields

    Hi
    i have datasource 0co_om_cca_9 .
    i want build 1 DSO, how can i identify what are key fields and data fields to build DSO based on that datasource.

    Hi sunnel,
    The DSO are like 2-D database tables.
    We use the technical keys here in counterpart to the business keys in Infocubes.
    The key fields are the one based on which the records are identified uniquely in the database table.
    And the data fields are the ones which are aggrgated or summarised or overwritten based on the value in key filed.
    For example:
    The ID no.s of the employees will be unique and it can be used as a key field.
    The feilds like the Salary taken by the employee every month :"SALARY"
    and the no. of leaves they taken: " NO. OF LEAVES" can be used as data fields.
    So that the salary or the leaves taken by a particular employee can be aggregated based on her/his ID no.
    The key fields in DSO doesnty mean Key figures.The key field means any unique key or a key based on which the records are sorted in the DSO
    And key figures are the data fields.Some of the Characteristics can also be data fields in DSO.
    Please give points if u r satisfied wit the information
    Also let me know if u hav any doubt and if any thing is wrong.
    Regards,
    Kalpana M

  • Defining Key -field and data fields

    Hi all
    i have to define Key-Fields and data-Fields for a DSO(say DSO3).
    DSO1 is a combination of DSO2 and DSO3..
    DSO1 and DSO2 are SAP defined DSOs.
    DSO3 is a User defined DSO.
    my assumption:
       DSO3 has 30 fields
       DSO2 has 16 fields.
       can i create the DSO3 with remaining 14 fields which is there in DSO1?
       or i have to create the DSO3 with 30 fields(all DSO1 fields).
    can any body explain....
    Thanks & Regards
    krishna

    The problem is not how many fields you create where, the issue is where is the data is going to come from.
    Since you data is going from DSO3 to DSO1and if the field is already getting populated in DSO1 from DSO2, then you don't have to worry about populating those fields again, unless and otherwise you want to overwrite them.
    Remember any fields exist in both DSO3 and DSO2 which overlapping will be overwritten by the latest update.
    Again, going back to your question, you should consider does your datasource has missing fields (14 of them).
    thanks.
    Wond

  • Table field and structure field

    Hi ,
    I am working on an user exit.
    I have to update a field on the transaction screen DFBATCH-MHD_IO (DFBATCH is a struture).
    Now the same field is defined in table MARA-VFDAT (MARA is a table).
    Now in the user exit function module I have written a code which will update the table field MARA-VFDAT.
    So will the structure field also gets updated automatically since that structure field is same as the table field (only name is different) or I have to explicitly equate table field to structure field.
    Raghu.

    How do you know that DFBATCH-MHD_IO is tied to MARA-VFDAT.   Is there a line of code in the transaction like this.
    MARA-VFDAT = DFBATCH-MHD_IO. 
    or
    DFBATCH-MHD_IO = MARA-VFDAT. 
    If you are updating MARA-VFDAT from your userexit, and the existing code in the transaction is filling the DFBATCH-MHD_IO from MARA-VFDAT,  then no you shouldn't need to fill it.
    Regards,
    Rich Heilman

  • SPl G/L posting Due on Date field should mandatory field .

    Hi ,
    while posting special G/l code 'G', (Advances from vendor with posting Key-29 ) I need  Due on Field as Mondatory field, (Baseline date for due date calculation
    Date to which the periods for the cash discount deadline and the due date for net payment refer. This is the case for line items in open item accounts.) it is giving other Spl G/l code except this code, it is in suppress mode. anybody can help me how get this field as reqd.( I have given same field status group and same reconciliation account also, for which I am getting it is a mondatory field eventhough it is not showing)
    Regards,
    SYReddy.

    1) use validation :  OB28
    2) tcode OB41
    A.

  • Units field MEINS for field TOTQTY of DataSource  ... is hidden

    hI,
    I am getting "Units field MEINS for field TOTQTY of DataSource ZDS_BEALO is hidden
        Message no. R8147 "
    error message while creating the generic extration using fuction module...
    Please help to slove this

    I solved this problem myself by writing ABAP program.
    REPORT  ZTEST.
    TABLES ROOSFIELD.
    DATA: ITAB LIKE ROOSFIELD OCCURS 0 WITH HEADER LINE.
    SELECT * FROM ROOSFIELD INTO TABLE ITAB
                           WHERE OLTPSOURCE = 'DATASOURCE_NAME'
                                 AND FIELD = 'WAERS'.
    *update ROOSFIELD set SELECTION = 'X'.
    *ENDSELECT.
    Create a report program and update the value of field "SELECTION" as above.
    Then try to make changes in RSO2 as it needed.
    Let me know if you need my help..
    Thanks,
    Hanuma

  • Units field XYZ for field ABC of DataSource ZRST Message no. R8147

    HI,
    When I'm trying to SAVE my datasource ZRST, I've got following error.
    Units field XYZ for field ABC of DataSource ZRST Message no. R8147
    In extraction structure of this datasource thare are at least two fields that use the same unit field.
    Accordign SAP note no 867795:
    One of the fields is displayed and another is hidden.
    Then the unit field is hidden and the above error occurs.
    This note is valid for component SAP_ABA release 700. I'm running my R/3 source system on SAP_ABA     620.
    Could it be the same case as described in this SAP  note?
    Anybody got same problem? Please advise.
    Thanks
    m./

    Hi,
        Please check the dependencies on the fields, as some fields should have the units defined ,check the fields and activate the datasource.
    hope this helps,
    thanks,
    vrrp.

  • Changing Non key field to Key field in a custom table

    Hello Abap gurus:
    I have a requirement in which i need to change a non key field in my custom table(Z TABLE) to key field.
    For example; i have field sequence as
    field 1  key field
    field 2 key field
    field 3 key field
    field 4 non-key field
    field 5 non-key field
    field 6 non-key field
    field 7 non-key field.
    i want to change field 7 as key field.
    Can i do perform operation??
    when i am tryingto perform bove operation it is taking long time to get the table activated.
    Could any one please help me in getting this resolved.
    regards,
    Sravanthi.

    Use DB Utility (se14) to perform alter table or conversion. The latter is used when atemps to perform first operation fails. Which one is used, really depends on system and current DB table state (i.e. if has any content and what is being adjusted).
    The way Max suggested is similar to [conversion process|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21f1b8446011d189700000e8322d00/content.htm] which system takes care of itself.
    Refer [Adjusting Database Structures|http://help.sap.com/saphelp_nw04/helpdata/EN/cf/21f1ab446011d189700000e8322d00/content.htm] and already given link to conversion.
    Please also consider potential errors while doing conversion . This can lead to data loss, so you should think of some backup to prevent that.
    Regards
    Marcin

  • How to access the value of a field of a field symbol.

    Hello All,
    i need to access the value of a field in a field symbol. But when i am trying to get the value like <FS>-POSNR, it's showing that that the <FS> has no structure.
    In my program, the field itself that i need to check should be dynamic. ie i'll get the field in a variable and i need to find the value of that field.
    Am pasting my code below, please tell me what needs to be done.
    here in my sample code i am moving the entry of the <FS> into a work area structure. But in my actual program, i gets the structure as a parameter. So is there any way i can declare a work area dynamically...
    FUNCTION z_39181_dyn_fs_60758.
    ""Local interface:
    *"  IMPORTING
    *"     REFERENCE(PARAMETER) TYPE  VBELN
    *"  TABLES
    *"      DATA_TAB
      BREAK-POINT.
      FIELD-SYMBOLS <fs> TYPE ANY.
      FIELD-SYMBOLS <fs1> TYPE ANY.
      FIELD-SYMBOLS <fstab> TYPE ANY TABLE.
      DATA name(5) VALUE 'POSNR'.
      FIELD-SYMBOLS <f> TYPE ANY.
      DATA: dref TYPE REF TO data,
            dref1 TYPE REF TO data,
            dref2 TYPE REF TO data.
      DATA: lv_lips TYPE string.
      DATA: lv_lipsfld TYPE string,
                lv_fld TYPE string,
                lw_lips TYPE lips.
                lv_lips = 'LIPS'.
                lv_fld = 'LW_lips-POSNR'.
      CREATE DATA dref1 TYPE (lv_lips).
      CREATE DATA dref TYPE STANDARD TABLE OF (lv_lips).
      CREATE DATA dref2 LIKE LINE OF data_tab.
      ASSIGN dref->* TO <fstab>.
      ASSIGN dref1->* TO <fs>.
    assign dref2->* to <fs
      <fstab> = data_tab[].
      LOOP AT <fstab> INTO <fs>.
        lw_lips = <fs>.
        WRITE lw_lips-vbeln.
        ASSIGN (lv_fld) TO <fs1>.
       write <fs>
      ENDLOOP.
    Helpful answers will be rewarded...

    Use syntax
    ASSIGN COMPONENT name OF STRUCTURE struc TO <fs>.

Maybe you are looking for