So here's something strange

All right. Perhaps I'm just being paranoid but I swear this is how it's happening. When my PC is on, the Wi-Fi to the iPad works totally fine. Connection is good, fast, never disconnects. But if I put my PC to sleep, it seems like the connection to the iPad becomes insanely spotty. It will disconnect, and sometimes when I wake it from sleep (the iPad) not only will the connection be lost, but the password is forgotten and I'm not even able to enter it back in until I wake the PC from sleep mode again.
Am I completely insane here, or is there something to this? Because I swear that's what is happening. I waited a few days to post this just to be sure it wasn't a once or twice type occurrence. It's happened multiple times.

Hmmm I'm really not sure how to answer that. I mean I don't believe so...I'm not even sure how that would be done. I mean it does and can connect when the PC is sleeping, I just seem to notice that my connection issues only seem to happen while the PC is asleep. If it's on, the connection never seems to drop or have issues.

Similar Messages

  • Here's something strange

    <body
    onload="MM_preloadImages('scripts/pngfix.js','scripts/xxx.css','scripts/SiteNav.xml','scr ipts/BreadCrumbs.js')">
    (taken from a review page)
    Does this work?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================

    Heh - I don't honestly know. It would seem to me that this
    code would
    exclude anything but images -
    <script type="text/JavaScript">
    <!--
    function MM_preloadImages() { //v3.0
    var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new
    Array();
    var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0;
    i<a.length;
    i++)
    if (a
    .indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a;}}
    ----------------------------------------------------^^^^^^^^^^^
    //-->
    </script>
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "E. T. Culling" <[email protected]> wrote in
    message
    news:ep2u21$34g$[email protected]..
    >I dunno, your the expert!
    >
    > --
    > Eleanor T. Culling
    > Leavenworth, WA
    > Experience Art
    >
    http://www.uppervalleyarts.com/experienceart.htm
    >
    >
    > "Murray *ACE*" <[email protected]>
    wrote in message
    > news:ep2ku7$l54$[email protected]..
    >> <body
    >>
    onload="MM_preloadImages('scripts/pngfix.js','scripts/xxx.css','scripts/SiteNav.xml','scr ipts/BreadCrumbs.js')">
    >>
    >> (taken from a review page)
    >>
    >> Does this work?
    >>
    >>
    >> --
    >> Murray --- ICQ 71997575
    >> Adobe Community Expert
    >> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >> ==================
    >>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >> ==================
    >>
    >>
    >>
    >>
    >
    >

  • When my wife tries to update one of her apps a strange Apple ID pops up. Her Apple ID is correct in settings and in the apple store. What does this mean? Where did the other one come from?

    When my wife tries to update one of her apps a strange Apple ID pops up. Her Apple ID is correct in settings and in the apple store. What does this mean? Where did the other one come from?

    There is something on your iPhone (a music file, iBook, document or video) that belongs to another Apple ID.  Only your wife would know how that file arrived there.  Your iPhone is asking for the correct Apple ID for all of the files that are resident on the iPhone.

  • Noticed something strange after 10.5.6 update

    Has this happened to anyone else?
    I updated to 10,5,6 and now when I start up, there's something strange at the log in window.
    Right under MAC OS X, it shows "Marty's Mac Pro (2)" I never had a (2) before, and wonder if there is something wrong here. Same when I go into System Profiler, top left corner, the name of my Mac is Marty's Mac Pro (2).
    Help?

    Change it in the Sharing preference pane.

  • Something strange when archlinux start up

    Hi,
    I have something strange when archlinux starts up.
    At the beginning, the resolution of screen is the same with the resolution setting in menu.list of GRUB. Then after the prompt "bring up lookback interface OK", the screen splashes one time, then the resolution of screen changes to a higher one.
    Anybody has encountered this problems?
    Thanks

    Thank you. It works
    hokasch wrote:
    Well, if you want to turn it off or get high resolution from early boot, look here: Intel Graphics Wiki.
    correction: KMS is required since xf86-video-intel 2.10

  • Something strange in my n70

    My n70 was doing strange things year ago and its battery was going out of charge in 3 hours despite no use of it.
    I BOUGHT ANOTHER BATTERY BUT THE PROBLEM was present
    when 3g service enter my state ( egypt) , the problem was ended and the old battery was working well
    How can i understand what happened ??????
    3g service fix my phone
    it is something strange
    anyone can tell me the reason behind this mysterious behaviour will be thanked

    yes i used different chargers but nothing changed
    now , no problem as i have said in my previous post after applying 3g service in egypt.
    it is ok now but only i want someone who can explain this strange action in my n 70
    take this , my at the beginings of 3g service in egypt , it was not good .
    the time 3g works well , my mobile works well and the time 3g works improperly due to the operator , my mobile is then becoming crazy as it closes itself , battery goes out of charge in 3 hours even i donot use it
    but now thanks to God 3g works very well here and no problem
    thank you

  • I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture?

    I recently had my iphone 4s screen repaired because the screen was cracked. It was all ok and then a few weeks later something strange happened. My touchscreen works, but the screen doesnt show, you can see the light in the background but no picture? has anyone got any ideas as to what the problem is, is it self-repairable or even repairable at al?

    The LCD Display connector has partially come loose from the logic board connector, and simply needs to be pressed back down into place. Or the front screen assembly is now faulty, and needs to be replaced again.

  • Hi, here's something for the more experienced to ponder.

    Hi, here's something for the more experienced to ponder.
    As of the past week or two my service has been taking nose dives periodically.
    The telephone service has also been affected. (noise and static like squeals)
    This is not a new problem, it has been ongoing for three years.
    I have repeatedly asked for a new pair (copper) to no avail.
    We went the route of replacement modems, data rate changes, Verizon presidential appeals and the problem "seems" to correct itself with cooler weather in the fall.
    I called repair service for the telephone just Friday and met with an understanding person on Verizon's end. She heard the noise on the line and listened patiently to my internet troubles. She assured me that she could schedule someone to fix the problem on Saturday, 6/16/2012 I thanked her and let it go for Friday.
    This morning at about 9:00 AM I got a call from a Verizon representative, not about the  problem, but rather about how the representative at repair service handled the call. I said the call handling was a ten on their scale. But when the question was asked about if I would recommend Verizon to someone, I had to ask that it could be repeated because of the noise on the line.
    It's pretty obvious that I didn't give a good mark as the answer to that question.
    But to the technical side of this to get people to ponder on this, here's my PRESENT Transceiver Statistics, copy and pasted for you to ponder....
    Transceiver Statistics
    Transceiver Revision     A2pB020b3.d20h
    Vendor ID Code               4D54
    Line Mode                        ADSL_2plus
    Data Path                         FAST
    Transceiver Information    Down Stream Path    Up Stream Path
    DSL Speed (Kbits/Sec)                    358                         747
    Margin (dB)                                     16.0                         9.9
    Line Attenuation (dB)                      62.5                        38.3
    Transmit Power (dBm)                    15.5                         12.4
    ( NO EDITING WAS DONE TO THE NUMBERS ABOVE, Formatting was done, adding spaces, to attempt to make it clearer to read. )
    I did not make any rude or crude remarks, because I think I may be on a watch list as my last two messages were edited and then deleted. But the bottom line is that I am not a "happy camper".
    Further food for thought; my filter is located in the demarcation box, from there to the modem is a home run with approved wire. An additional filter is installed after the "voice line" comes into the house from the demarcation box for the whole house.
    Line to the pole is new, maybe three pair, I don't remember. Distance to the central office is about two miles, BUT there is some sort of device installed in the lines between here and there, according to what was said by previous repair personnel.
    This is the third year with these problems.
    Any thoughts?, anyone?
    Solved!
    Go to Solution.

    Thanks Mr. Smith,
    I'll try and get back in after the dust settles and let you know how it goes.
    If I can't, thanks again!
    Gerry

  • I have a feeling this has been up here a lot.  I updated ios 6 to my phone with no problems but I also back my phone up.  I decided to help the wife out and update hers and something went wrong data lost.  All contacts, photos, etc without backup, help.

    I have a feeling this has been up here a lot.  I updated ios 6 to my phone (4S) with no problems but I also back my phone up.  I decided to help the wife out and update hers and something went wrong data lost.  All contacts, photos, etc without backup, help.

    if you have no back up in icloud or itunes the best you can do is sync with your computer and get back  what you can from there

  • Something strange with google search..

    Something strange has happened with google...it's stuck on permanent zoom or something, like I have accessibility enabled, but I don't, and it only happens with google, everything else is normal. It's really zoomed in and blurry. The text is also chunky and kind of difficult to read..like it's too big for the search bar, and the little symbol on the search button is like off to the side, it's just clearly messed up. I've never had this problem before and can't figure out for the life of me what's causing it. It goes away if I switch to classic mode from tablet, but Id always used tablet prior to this and it was fine. I'd really like to fix tablet mode so I can use it or find a way to permentalety switch to classic because starting out on tablet and having to switch every time is a pain. Any ideas would be greatly appreciated, thanks.

    I know of no way for the Google search to automatically go the to Classic site. Google directs the browser to mobile site because you are using a mobile device. You cannot control that in mobile browser like Safari. If you were using another web browser idenitifed as a desktop browser, you could set the page to Classic and it will stay there. I use iCab Mobile (I gave up Safari ages ago) and I indentify the browser as Fire Fox 4.0 for Mac and it always takes me to the Classic site.
    One last time... this is where you are having this issue? Can you post a screen shot? Do you know how to do that? Hold down on the sleep button and then tap the home button and you will see the screen flash white and hear the camera shutter sound. That screen shot will be saved to the camera roll and it will be the last photo in the album.

  • Something strange is happening to the time on my iTouch.  This morning it was reading one hour behind the actual Toronto, Ontario Time.  Now this afternoon it is exactly 3  hours behind the current time.  Any suggestions?

    Something strange is happening to the time on my iTouch.  This morning  at 10:15 Toronto, Ontario time my touch said 9:15 and now at 4:27 my  touch says 1:27?  Any suggestions to what might be happening?

    Have you tried a Restart and/or a Reset...
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons..
    http://support.apple.com/kb/ht1430

  • Something strange in my router's list of attached devices.

    This might be a tough one.
    Here is my setup: Imac g5, cable modem and netgear rangemax wireless router, ethernet connection, WEP encrytion with SSID broadcast disabled. Currently not taking advantage of the wireless yet.
    Here is the strange thing: Most times (I am paranoid and check all the time to see if anyone is trying to creep into my network), when I check my list of "attached devices" in my router login page I see this:
    Attached Devices
    IP Address: 1. 192.168.1.3
    Device Name: -
    MAC Address: (don't know if I should show that)
    Notice that there is no "device name."
    And sometimes I see this:
    Attached Devices
    IP Address: 1. 192.168.1.3
    Device Name: YOUR-XB2X7J77GN
    MAC Address: ***************
    Obviously, the weird thing here is the "device name."
    Now, I googled my device name: YOUR-XB2X7J77GN and got a few hits that contained words like "hack" and such and some hits that didn't really saying anything suspicious. Didn't find anything that seemed to do with wireless networking though. Seems like someone else somewhere in the world would have noticed this and posted in some forum about it but nothing that I found, which I think seems a little odd. Google this name and see what you think.
    Question: Why does my device name change sometimes and should it be changing. Is this worth looking into and do most user's just not care to even look at this stuff?

    Don't know, but I've read in Apple articles and elsewhere that WPA is more secure than WEP, and that was prior to WPA2. You might want to consider switching over.

  • Something strange on Access manager

    Hi all,
    I am successfully installed all Sun Java ES component. And the portal and gateway run smoothly. But now i am facing something strange about AM. When I login to the AMConsole, I find that there are many session which are using "AMADMIN" to login (around 120). And I checked the log file, those session are login from the same machine of AM. Is there any setting which can avoide it.
    Regards,

    Hi Jeffery,
    You can call a javascript function to capture the closing of the browser (If a user clicks on the X button).
    Call the following javascript function on "onBeforeUnload" event of the <body> tag.This will be executed before the browser is unloaded and will logout the user before the browser closes.
    function logoutOnUnload()
    var iX = window.document.body.offsetWidth - window.event.clientX ;
    var iY = window.event.clientY ;
    if (iX <=30 && iY < 0 )
    document.write("<img width='1' height='1' src='/amserver/UI/Logout'>");
    alert("Closing this browser window will end your portal session.\nIn the future, please click the Log Out link in the upper right corner of your portal desktop.");
    Let me know If there is any issue.!
    Thanks,
    Deepak.

  • Something strange is happening with Siri

    Whenever I use the voice function on the keyboard in an app which doesn't support the iOS7 keyboard, something strange happens. The three purple dots which usually appear in the text field when Siri is trying to work out what I said are no longer there. There is now a small emoji-like image of one of my applications.

    This might help you to understand what I'm talking about. http://brychapps.paaage.com/strange-siri_53462.html
    Thank you for any help!!!

  • Something strange appeared on my desktop.

    I already sent in an email but I needed to add to it, something strange appeared on my desktop, but I don't know what it is.  I think it is from a hacker and I would like to remove it from my computer, along with the update from apple (I think it was from a hacker), because I think that is how the hacker got into my computer.  Thank you, Carin

    migimatsu wrote:
    How to delete this ???
    There are four possible answers to your question in the posts above.
    Maybe you should try each one and tell us which one works?
    1. Use Terminal command rm ~/Desktop/"client node"
    or
    sudo rm ~/Desktop/"client node"
    2. Wait 2 days
    3. Log out.
    4. Restart Finder
    頑張って ください!

Maybe you are looking for

  • Twain_32 Drivers

    On Windows 7, photoshop CS5 no longer loads the twain drivers in Windows>Twain_32 into File>Import.  How can I get them there?

  • How to remove the color of a editing field

    Hi, I have created a view of two fields and on forms ive created a tabular block based on that view...both the fields has insert and updated property false...and over there i have navigation on records by up and down keys and also mouse click...and o

  • Trouble with a int parameter

    im haveing a problem grabing a integer parameter from a html page <PARAM name="parbg" value="1"> first i get incompatible types so i changed it now i get testmenu17.java:91: getParameter(java.lang.String) in java.applet.Applet cannot be applied to (i

  • Can ws exposed from Pi70 handle 5-10 million records

    Hi Friends,           we have a scenario, wherein 5-10 million records needs to be sent from SAP system to J2EE system using PI70. we are exposing outbound Mi as web service to J2ee system for consuming.Can this SOAP connection/MI Outbound  handle 5-

  • ;-| Is it possible to get a list of Roles for the EJB Caller?

    Hi, from an EJB I can use isCallerInRole(role), however I would like to get a list of Roles that the user is in to do DB lookups for each role... I have an implementation under 'JBoss' which does a JNDI lookup for the SubjectSecurityManager using jav