So....How do you apply for affiliation in order to get the links and support to build a site when applications are denied on sites under construction?

Building a website , large , with old iWeb no less; not sure if i'm wasting my time. Not an expert, just have a dream. needed to ask a tech question on links to store if approved. But apparently I cannot build the site, complete with links as it will be under construction and denied approval. What does iTunes require? An up and running, possibly successfull site before approving me to re-do it with their links?

I would suggest that you contact the Affiliate Help Desk and ask what they will need to see on your site before they can approve your application.
http://itunesaffiliate.phgsupport.com/home
Regards.

Similar Messages

How do I "Launch" Adobe Reader in order to accept the Terms and Conditions in order to view PDF documents? ....Somers

How do I "Launch" Adobe Reader in order to accept the Terms and Conditions in order to view PDF documents? ....Somers I'm using a MAC with up to date software.

Launching is just the normal word in Apple's word for "run an app". You can launch an app from the Applications folder, or in recent versions of Mac OS using the LaunchPad (rocket icon). You can't assume all your apps appear on the dock (bottom strip), it's only the ones Apple put there or you added.

How will you do for November pay roll before release the Note:2082383.

< Japanese translation is below.>
Dear Experts (Especially for Responsible for Japan pay roll),
Please le me know how you will deal with November pay roll before releasing note:2082383.
(The legal change of non-taxable amount of Commuting Allowance for Car.)
Note 2082383 is going to be released by SAP on November 30.
However, Japanese low has effected since October 20 2014.
How will you deal for November pay roll for Japan before note releasing ?
Will you change V_T5J64 table by your self according to Cabinet Order #338?
Or will you just wait until SAP releasing this note ?
Do you think that SAP will provide any report for this recovery way for November pay roll if we wait SAP note releasing ?
Regards,
Mayumi
< Japanese version >
Expertの皆様
先日、官報＃338が出され、10/20 より施行されていると存じます。
SAPの当該ノートは11月30日にしかリリースされないようですが、皆様、11月の給与はどのように行いますか？
V_T5J64を官報の情報に合わせて変更し、当座11月の給与を回しますか？
それともSAPのノートリリースを待ちますか？
SAPのノートリリースでは、11月の給与が古い方法で施行されたことによるリカバリレポートなど出るのでしょうか？
以上、皆様の対応方法をお尋ねいたしたく。
よろしくお願いいたします。
Mayumi

Hi,
Ask SAP directly with regards to the way they will handle this and whether they will produce a report to recover. Speak to the Japanese revenue and explain to them that you are in this predicament and I am sure they will be able to give you a leeway till November, but still be able to report on the Oct figures.
Off course you can try the config changes yourself. Pilot the note in Dev and see if the figures make any sense. But this will be dual work as when the note gets released in Nov you will have to revisit your configs and undergo a complete check. Get in touch with SAP in my opinion!
Aran

How to get the original query string in an event receiver when dialogs are enabled

I have scenario where I am adding a document to a document library which has an external data column on it. My goal for this column is to have it automatically populated with an appropriate value based on original query string to the page. The general
idea is that I am on a custom page that has various webparts on it including a view of my document library that is context sensative based on the query string, and I want to use that context sensitivity not just to filter the list but also when adding documents.
I have been searching around for solutions to this problem all day and have gotten this far:
I have an event receiver attached to my document library that handles the ItemAdded event syncronously (as such I have the new list item available to me). In that event receiver I am able to set the column values as required. Where I am stuck is on getting
the value from the query string that I need to actually set as the column value.
Based on:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/8cfcb299-9a55-4139-86ec-0b53b2922a54 and several similar articles/posts I have been able to get the original source Url with the query string I want via the following
code in my event receiver:
private HttpContext context;
public EventReceiver1()
context = HttpContext.Current;
public override void ItemAdded(SPItemEventProperties properties)
var originalQueryString = context.Request.QueryString["Source"];
// Parse the query string and use the value ...
The problem is that this solution breaks down if the dialogs are turned on under the advanced settings for the list. The reason the solution fails is because the "Source" query string parameter goes away and is replaced by "IsDlg" set to a value of "1".
Does anyone know how to get past this hurdle? Any help would be greatly appreciated.

Hi Stuart,
The reason I'm looking for "Source" in the query string is because that is something I found to be reliable when the Dialogs are turned off. I've dug around pretty deep in the Request object to see if anything had the data I was looking for and unfortunately
it doesn't appear to be there. The
context.Request.QUeryString.ToString()
returns a rather simple one of:
List=%7b43ECDCB0-8440-4652-B067-AA20481779D7%7d&RootFolder=&IsDlg=1
and the
context.Request.UrlReferrer.Query.ToString()
has the same value.
I suspect this is due to the dual step process that takes place in adding an item to a document library where the first modal popup (which I suspect likely has the information I need) gives you the opportunity to browse to your file and then the second
dialog (maybe this is getting brought up as a result of another request which is now referring back to the original request that brought up the first dialog?) where you edit your properties.
Thanks for the try though, if you've got anything else I'd love to hear it.

Urgent: how to change my residence country, in order to get the right amount billed

Hello Creative Cloud Community and Support. I'm contacting you since I have this big problem. One year ago I, when I was on an exchange study program I found myself in Israel. When there, I tried to download my free photoshop creative suite ( I was enrolled in a photography school so I was having an 'educational membership' ). At that time I contacted adobe support who was very gentle, unfortunately in the end we discovered that there was no way to have the programs in Israel. When I returned to Italy - still with some problems - I managed to download them and the problem was solved. Now the educational membership has expired, I'm no longer a student and I want to subscribe myself to one of adobe's plans BUT when I come to the paying , my residence is still set on Israel and the amount is set in NIS . And I can't change it. It's written also that I will pay an extra amount due to international transfers and so on.... I copy it here under:
" Even though prices are stated in your local currency, this transaction may constitute an international transaction, since you are purchasing from Digital River Ireland Ltd., an Adobe-approved e-commerce reseller. In addition to the price charged for the software, your credit card or bank may levy additional bank or credit card fees or fees for currency conversion. Please verify with your credit card or bank whether additional amounts will be charged before you make your purchase. "
also in the little space to complete ' country' I can only choose Israel.
well maybe this could be right if I would be still living in Israel, but I'm not!! How can I fix this? Many thanks for any help you'll be able to give me.

contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

HT2731 How do I apply for a separate iTunes account on the same computer?

I have an iPhone and my brother has an iPod touch. We only have one computer at our house ao we have been sharing my account. I get all of his music he purchases whether I want it or not. Is there some way we can both have our own personal separate accounts?

Hi...
Create a new user account on your computer.
http://support.microsoft.com/kb/279783
That way you can login to your account and he can login to his.

How can I compare the actual and expected values in Unit testing when they are XML files?

I have created a unit test for a method in VS 2008. My expected value and actual value are XMLs. Therefore though the output is same as I expect it gives an error as I am doing string comparison now. How can I compare these 2 XMLs in expected output and
actual output format in Unit Testing?
mayooran99

In unit test, when you want to validate XML files, you feed them into the class / struct that you want to feed the XML into and compare the values there (You don't just feed it in XMLReader and feed it line by line, right? But if it really is, that's how
you should also test it in unit tests).
In short, how you'd use the XML in your code, that's how you should test it in unit test.

How can i fix my laptop if i cannot get the sound and audio working again

hp pavilion g7-1219wm, windows 7 32- bit, having trouble with my audio, no changes occured it just started messing up when i was watching my tv show on netflix,

- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How do I break a stereo audio clip to get the left and right separately

$subject really. If I break apart a stereo audio clip I just get track 1, I can't get track 2.
Thanks

I tried that, but I keep getting "Unsupported Clip" in the channel configuration audio tab of the Inspector.
Here's my workflow:
Import Flip cam's h.264/AAC MP4 files
Edit a clip into a project.
Break apart the clip, to give separate video and audio segments
The green audio segment (will have -a1 after the name in the segment) will be say it's an "Unsupported Clip" in the channel configuration audio tab of the Inspector.
If I change the original clip to dual mono before I break apart I get two mono clips, which is what I was after (but then I could just disable one of the dual mono tracks without splitting apart if that was all I wanted).
I suggest that getting an "Unsupported Clip" when I break apart these clips is a bug.

How do you apply freight to a PO number on a second invoice?

Some of our vendors will bill us later for freight from a PO. How do you apply this to a PO number? The only way I can see this happen is if you create a change order and add the freight to a line on the PO. Any ideas would be appreciated.

Sampleconstruct wrote:
.... or you can use Soundtrack Pro (export your file to SP with command shift+w) which comes with Logic Studio as an external Audio editor, do all the Plug rendering in there and bring the file back into Logic which works great for me.
I tried to find the thread we had going on here about this very thing, but couldn't find it (it probably got deleted, because it was informative...)
But opening Soundtrack Pro from Logic is THE way to do this. If I had known how easy this was, I would've been doing this months ago.
Just this week, mixing a song, and there was a serious plosive on a word on the lead vocal rack. I hit shift/W, and the vocal file opened in Soundtrack Pro. I highlighted the plosive, applied a low cut from the channel EQ, flattened it, and quit STP.
The vocal file in Logic immediately updated, and it was done. The EQ was applied permanently to that one section of the vocal file, and I didn't have to automate anything, or export anything.
It took less than a minute. Seriously... this is the way to handle destructive edits to audio. It's VERY easy to do.

How do you apply a master page to multiple documents at the same time?

How do you apply a master page to multiple documents at the same time?

Hi friends,
Thank you for trying to help me out.
Let me explain it a bit to remove the ambiguity.
I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
I think now my question is more clear...

How do you apply a vector mask to a folder in Photoshop CS6?

The ways you apply vector masks in CS6 is different than in CS5.
I knew how to apply a vector mask to a folder of layers in CS5.
I cannot figure out how to do it in CS6.
So my question is:
How do you apply a vector mask to a folder in Photoshop CS6?
And while we're at it, what are the best methods for applying vector masks to regular layers?
Thanks.

thomasbricker wrote:
Im back...
The thing is, Im not usiing the pen tool to create the vector shape. Im using the vector box tool to create a rectangle [...]
Yes and that's why I wrote the words "vector tool" and never mentioned a pen. (Although the instructions would be exactly the same for using the Pen Tool because the Pen Tool is a vector tool.)
which I then want to turn into a layer group mask.
And yes, this does not work the same way as it did in CS5.
I wish it did. : |
Adding a vector mask to a layer or group is exactly the same in CS5.1 and CS6 on my Mac. Maybe that's done differently in CS5 than in CS5.1, but it seems unlikely.
You have the layer or group targeted. Now draw a rectangular path after making sure the Rectangle Tool is in Path mode, and not Shape mode and not Pixel mode. Then Cmd/Ctrl-click the Add Mask button at bottom of Layers panel.

How do you apply the school proxy settings to the ipad to filter website searches?

How do you apply the school proxy settings to the ipad to filter website searches?

Hi Stebop1987,
You will want to apply a configuration profile with Global HTTP proxy settings to your proxy server. Use Apple Configurator or an MDM to deploy the configuration profile to your fleet of iPads. I recommend you contact your web filter provider for detials on what proxy details to enter in the configuration profile (type, server, port, username, password).
Hope this helps!
~Joe

How do you apply the EQ settings to a particular genre or album?

How do you apply the EQ settings to a particular genre or an album instead of individually applying the setting to one song at a time.

It's probably easiest to first be in list view and have your Column browser up.
Set the Column Browser to show Genres.
In the Genres column, select the Genre you want to apply the EQ to. Now select all of the songs that appear for that genre.
Right-click on the blue mass and select "Get Info". Say yes to the dialog asking if you're sure you want to edit information for multiple items.
In the Options tab of the Multiple Item Information window, check "Equaliser preset", pick the equaliser setting you want and click "OK".
Processing may take a while if you've got a lot of songs in that genre.
For an album, it's basically the same process.
Set the Column browser to show albums.
In the Albums column, select the album you want to apply the EQ to. Now select all of the songs that appear for that album.
Right-click on the blue mass and select "Get Info". Say yes to the dialog asking if you're sure you want to edit information for multiple items.
In the Options tab of the Multiple Item Information window, check "Equaliser preset", pick the equaliser setting you want and click "OK".

How do I apply for ApplePay credit cards?

Hi, How do I apply for ApplePay credit cards? I am currently running mavericks 10.9.5

Hi ..
Apple Pay does not issue credit cards.
You must have an existing credit or debit card mentioned here > Apple Pay participating issuers
Good article to read prior to using Apple Pay > Apple Pay security and privacy overview

So....How do you apply for affiliation in order to get the links and support to build a site when applications are denied on sites under construction?

Similar Messages

Maybe you are looking for