So, I bought the iPod shuffle and when I plug it into my mac, the option of syncing doesn't appear. What do I do?
So, I bought the iPod shuffle and when I plug it into my mac, the option of syncing doesn't appear. What do I do?
Does the Shuffle appear ini Tunes at all? If not try using a different USB port and double checking to make sure the other end of the syncing cable is firmly seated in the Shuffle.
B-rock
Similar Messages
-
I just bought a new ipod touch and when i plug it into my Mac usb port nothing is happening I can get the computer to sync other ipod in the same port
Try:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Do not omit the Additional Information paragraph.
Is the iPod that connects an iPod touch? If not that does not mean anything since iOS devices like iPod touch, iPhone and iPad use different drivers than other iPods. -
'You must restore this iPod with iPod Reset Utility before it can be used with iTunes. For help, click More Information.'
When clicking for more information it doesn't allow me to download the required driver.
Can anyone help?Hello, j9friend.
Thank you for visiting Apple Support Communities.
Here is some helpful information regarding the iPod Reset Utility.
About iPod Reset Utility
http://support.apple.com/kb/ht1238
Cheers,
Jason H. -
I just bought an IPhone 4s and plugged it into my Toshiba Windows 7 (64 bit) OS and it failed to recognize the phone. I checked in the tech community and discovered that I need to remove all the software assoicated with the phone and start over....I followed the sequence exactly...reinstalled the software and it still doesn't work. I am trying to download the IPhone 4s video to my computer and without a USB interface that works my memory capactiy will fill up fast....I've already been into the control panel....stopped and restarted the Apple service....I am stuck...can anyone offer some suggestions or knwo if there is a fix for this issue..??
Thanks,
EricI solved my own problem....I simply moved the cable to another port while moving the mouse to the USB ports on the opposite side of the computer....and the computr finally recognized the phone...I know it sounds weird but it worked...so if you are having the same problem that had trying removing all the crap you have plugged into the USB ports on your computer THEN plug in your IPhone 4s...use the cable that came with the phone and nothing else...good luck..>!!!
-
I have been on the Apple Support page for several hours now and cannot find my exact circumstance and other suggestions have yet to help me. I purchased a locked ipod touch and when I plug it into my laptop itunes says "Itunes could not connect to ipod because it is locked with a passcode". The guy I bought it from told me the password but I failed to write it down and remember it and he has since moved so I can't find him. I have tried putting it in DFU mode and I can get it there, but then Itunes does not show the pop-up that everyone has said will come up with the alert about an ipod trying to restore itself so I cannot get it to do so. Any suggestions would be greatly appreciated!
Thanks,
AMWhen in DFU mode and connected to the computer iTunes does not say anything but iTunes will see the iPod and you can restore the iPod via iTunes. When in recovery mode and you connect, iTunes will say it found an iPod in recovery mode.
-
when i upgraded my iphone to the new update My iphone 5 screen went completely black and has been like it for 2 days. I have tried holding home and lock,I have tried holding lock and the volume, and I have tried holding just the volume, it still just stays black.
When i plugged it into my Mac the apple logo comes up on the iphone screen. and then on the computer it says itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes. (as in the below pictures)
when i click ok to restore it just says waiting for iphone (as in the other photo below). i left it in for 20minutes and still said the same thing.
after that i tried unplugging the iphone and it just went back to being a black screen again if anyone has any idea please please help me, thank you.I searched the iPod Touch forum for "iphone in recovery mode" and it appears there are two possible solutions:
- Place the iPod in DFU mode and then restore it>
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Use this program to get it out of recovery mode:
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?
Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem. -
I recently bought an ipod shuffle and my computer doesn't give me an option to sync. I downloaded latest edition of itunes and it still won't let me sync.
See the How To Sections Here
http://www.apple.com/support/ipod/earlier/
And Here
http://www.apple.com/support/ipodclassic/ -
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I just updated my iTunes to the new software. When I plugged it into my computer and it said I need to reset my iPod. I did this and everything on my iPod deleted. Now, it won't let me sync my music or apps back onto my iPod. What do I do?
It doesn't say anything. It runs through the sync process like normal and tells me all of the songs that it's synking. But then when it says I can disconnect it, nothing actually synked.
-
I have a iPad mini an my friend in pa has the iPod 5 and when we try to face time or audio call we can't hear each other what should I do ?
Make sure both parties are running IOS 7.1.1
http://support.apple.com/kb/TS5419 -
I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
Apple Retail Store - Genius Bar -
I just factory restored my iPod 5 touch and when I plug it into iTunes to back it up, iTunes stops responding and closes. This only occurs when the iPod is plugged in, when it isn't, iTunes works fine. I am using Windows 8 and iTunes is updated (as of this posting). Any suggestions on getting around this? Thank you.
Also, when I put it through the Windows diagnostic, it lists an "incompatible program" WHILE my iPod is plugged in.
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
I bought a new itouch 5, and when I plugged it in to get the updates it could not update and I got an error code
And that error code is?
Maybe you are looking for
-
Standard And Customized BEx Reports & workbooks for the Modules FI,SD,MM
Hi..All Can any one explain about Standard and customized BEx Reports and workbooks which were frequently used in implementation projects for the modules SD,MM and FI? Thanks & Regards Jonn
-
i have an ipod touch 3rd gen iOS 3.1.2 im trying to get an app but it tells me i have this app requires iOS 4.3 what do i do ?
-
Read from server and display in external frame
Hello everyone, I am using Eclipse, My project consist of server and client connected through a socket. When I connect to the server, i am getting lots of data from the server and it takes a bit of time, so I was thinking while the user wait for the
-
Follow-on Question: special character in SED routine
ref. http://discussions.apple.com/thread.jspa?threadID=1281065&tstart=0 Camelot successfully answered my specific question in the above thread. When I closed that out, I tacked on a related question -- but either that was missed or there's not a stra
-
My macbook pro won't start up after updating it
I Have a macbook pro with Mavericks (I don't remember exactly which one) which I bought in 2012, yesterday night I updated it and it restarted but it took forever and I thought it was installing something, so I left it like that all night and day and