So i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?
so i dropped my iphone 4 in class and the screen is cracked. it wont turn on so i went home and connected it into my itunes and the phone just keeps beeping like every ten seconds and the phone lights up just a little. What does this all mean?
It means you should take it to the Genius Bar. You will no doubt need to buy an out of warranty replacement.
Similar Messages
-
I was try to research an item I wanted to purchase and I noticed that I didn't have my "invisable hand" to find the lowest price. So I went to Mozzilla to find the problem. Only to find out I only had a blank page. I followed the suggestion on the help page but it didn't do anything. So now I contacting this to resolve the problem.........hopefully
Hi jemlady,
You should try typing ''about:home'' in the address bar. Is that the page you want as your home page? You should look at the Knowledge Base article [[How to set the home page]]. It has steps on how to reset the home page to default. I'd try that first.
If that doesn't work, start Firefox in Safe Mode by holding down ''Shift'' while Firefox is starting. It could be an issue with preferences, so you might want to look at
*http://kb.mozillazine.org/Resetting_preferences
*https://support.mozilla.org/kb/Resetting+preferences -
I hooked my ipod classic up to my mac to update it. It took for ever to detect. Than I got a message saying an error was detected that I should restore. I did. It than erased my ipod. than it synched up to itunes it said it was done and it was ok to disconnect so I did and my ipod is still blank... it said error 1433 was detected. So now I have an empty ipod that won't store anything on it.... what should I do to remedy this situation? I need my music:(((
What model iPod
Identifying iPod models
http://support.apple.com/kb/HT1353What iOS version (Settings>General>About>Version)
What computer OS and version? I suspect a Mac with OSX 10,5,8
Whart version of iTunes?
A Mac with OSX 10,5.8 should synce but not restore with iTunes version 10.6.3
iTunes 10.6.3
To restore you need iTunes 10.7 or later and that requores OSX 10,6,8 or later -
I am trying to make a dvd from a video I shot with a Sony HD avchd camera on a new mac mini running mac os x version 10.7.4
I'm using an up to date Imovie but copied IDVD version 7.1.2 and the support libraryt from an up to date macbook. The video is about 40 minutes long. It looks beautiful all the way from teh camera to playing it on idvd, but when I play the dvd on a player or in a computer it stops momentariily about every ten seconds and the picture is ziggy on diagonal lines.
Also, if I try to save the movie as a .mov file there is no audio.
Can't I move idvd to my new computer?Hi
Why is the picture better all the way to iDVD - then degrades on the DVD
• DVD is as standard - interlaced SD-Video
If You need better then only way is via Blu Ray
• iMovie'08 to 11 - can not deliver this any way known to me to iDVD - first step in the degradation process
Use iMovie HD6 or FinalCut to do this delivery to 100% of what's possibly
Jaggy diagonal lines - mostly due to the use of iMovie'08 to 11 as they only deliver every second line in an already limited quality as interlaced SD-Video - taking away 50% doesn't improve a bit
Jumpy movie -. most often due to feeding iDVD wrong frame rate and forceing it to convert - IT DOES this BADLY. I use JES_Deinterlacer (free on internet) to do this and it does this even better than pay applications.
iDVD can only deliver 25fps (PAL) or 29.97fps (30fps) (NTSC) - so feeding it
• 24 i or p
• 50p or
• 60p
Will not improve at all.
If iMovie'08 to 11 are only option - Then
• DO NOT - Share to iDVD - as this too degrade the final product
• I do - Share to Media Browser - and as - LARGE - Not HD or other resolution as this too degrades quality
More can be said on this - My long note follows - if of interest.
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W -
When I am purchasing some music on I Tunes I usually like to listen to a short version of the Song before purchased but lately when I try to listen to the Song
it keeps on buffering every 2 seconds and I can't listen to the song of which I want to purchase correctly .You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.
-
I have windows 7 and have tried the troubleshooting steps but am still unable to connect to the itunes store yet my PC is connected to the internet, it just keeps looking like its trying to access the store
I have the same problem but the solution Wendyz99 did has not been successful for me. Part of the itunes store loads on the right side where the tabs for Quick Links and Top Charts are but the center section of the page is white. Also if I click on a song that is in the top chart area it will take me to the page but I'm not able to purchase the song or preview the song.
I feel I have tried all the solutions I can find on line and even had conversations with apple tech with no help.
I have down loaded the Autoruns program and in the winstock providers I have Bonjour and Microsoft Windows Live ID Namespace Provider. I have removed Windows Live and this still does not resolve the problem. I am at a complete loss. I am running windows 7, 32bit. Someone please help! -
While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??
The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
HT201514 What does this message mean and how do I correct it?
What does this message mean?
"The backup disk image “/Volumes/Nicholas' Time C-1/nicholas--MacBook Pro.sparsebundle” is already in use"
How do i correct it?What does this message mean?
It means that there are bugs in Mountain Lion.
How do i correct it?
Make sure that no other Macs are backing up at the current time
Pull the power cord from the back of the Time Capsule
Wait 10 seconds
Plug the power cord back into the back of the Time Capsule
This simple reset will fix this issue 98% of the time. If you happen to be in the unlucky 2% category, post back and we'll provide more information. -
What does this error2 mean and how do I fix it?
What does this error mean and how do I fix it? I am trying to reinstall CS4 on my Windows 8.1 machine.
Adobe Flash Player 10 ActiveX
Error:
Error 2.
Here is the initial error: http://s29.postimg.org/wqy2ju8iv/Untitled.png
Here is a screenshot when I click the "More Information" button: http://s27.postimg.org/bugb7rx7n/Untitled2.png
And here is the screenshot when I click the "Get Support" button: http://s4.postimg.org/c2ynvhmvx/Untitled3.png
I'm stumped.Hi there I've just installed CS4 Pro on Windows 7 64bit and got exactly the same result as you. Did you manage to find anything out, because the thing that bothered me was the limited functionality (what ever that is). Is it just a case of Windows 7 having a newer version of ActiveX already installed?
-
what does this message mean: this apple ID has not yet been used in the iTunes store"? I cant connect using my iphone. But it works in iTunes on my laptop.
FAQ apple id http://support.apple.com/kb/HT5622?viewlocale=en_US
http://support.apple.com/kb/HT1311 -
What does this message mean? "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired" I get this when I try to repair permissions in disk utility.
It's an innocuous error you can ignore. It was introduced with previous updates for ARD and/or Java before Lion. These are messages, not errors. They will cause no harm, and they will be repeated each time you repair permissions.
-
Hi there,
I have just tried to sync my iphone.
Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
I have just removed old iphone backups from itunes but was very careful to not delete the current one
What does this code mean?http://support.apple.com/kb/TS1583
-
What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." ?
What does this message mean? : "The file name "DSC_0088.jpg" is offline or missing." I am in the process of importing photos from iPhoto (don't really know what I'm doing....) and when I look at one of the imported photos that message pops up. I know what "DSC_0088.jpg" is. I don't know what it means that the file is "missing".
CASpyr,
Thank you so much for your reply. I have a couple of bigger issues that I am dealing with: too many photos on my laptop: 40,000! (Of course I have to throw away many of them, but that is time consuming). I have a MacBook Pro and have primarily used IPhoto. I have recently purchased 2 external drives and have transferred my photos to those, but I need a basic education about how photos are stored, copied, etc. I have recently been told that iPhoto only shows and deals with jpegs, not RAW. About 1/3 of my photos are RAW, so I purchased Lightroom, so I could do more with those RAW photos. I have been told by my local Mac store that I need to delete most of my photos from iPhoto, because it's causing problems. I am reluctant to do so until I am sure that all of the keywords, descriptions and editing I have done to these photos is not lost when deleted from iPhoto. I just watched a tutorial about importing to Lightroom and got out of it that I needed to copy photos from iPhoto to a file on my desktop and then copy to Lightroom. I did that, it seemed to work. Then (because of my storage/memory issues) I deleted the photos (just a few as an experiment) from that desktop file. I'm guessing that is why Lightroom doesn't recognize the the photos. It seems that (learned from another tutorial) that one uses "Add" , Lightroom is only connecting to the source of the photo, not actually copying it to the program. Sounds like I need to use the "Move" feature instead. My ultimate goal is to store the photos on the 2 external drives and eliminate most of them from my lapop. So my basic questions have to do with what data (metadata??) is copied from iPhoto to an external drive (RAW???) and what isn't copied. Basic understanding issues,obviously…. I hope this isn't too much to ask. If you can recommend a book or resource that can explain those basic issues to me I'd appreciate it. I just got back from a trip and I can't download my new photos until I manage the rest!
Thanks,
Nancy -
What does this error mean? There was an error in the App Store. Please try again later. (100)
what does this error mean? There was an error in the App Store. Please try again later. (100)
I have the same problem and thought it might be related to moving to Denmark. My app store account was set up for USA and then the error number in parentasis was (13). After changing the profile to Denmark the number changed to (100), like yours
-
What does this message mean - The operation can't be completed because the item "12b" is in use.
The operation can’t be completed because the item “12b” is in use. What does this message mean. It appeared as I was attempting to clear my time machine backup?
Reboot your machine make sure Aperture doesn't start (as Lion is liable to do) and try it.
Maybe you are looking for
-
Keynote says I need a newer version but I have 5.1 latest version
I have Lion and Keynote 5.1. When I try to open a 1gig presentation (years of work!) it says, You need a newer version of Keynote to open this. I have trashed all earlier versions of keynote, and downloaded 5.1 from app store. On 'get info' on the fi
-
What operating system we can use documentations like Microsoft MS office or can is used MS office in Mac pro notebook?
-
I'm about to pick up another 24" imac off of Craigslist for peanuts, I was told there is a boot chime through the internal speakers, but no audio after that... it just gives a "NO" symbol when using the volume keys (circle with a line through it) and
-
Passing Parameters to a Fragment
I want to use a fragment as a header with 2 levels of tabbed panes. The tabs will be selected with CSS classes. How best can I pass the parameters to the fragment? I could make "groupname" and "pagename" session variables, but is there a way to pass
-
"ImageList1.Images.Item(#) = ImageList2.Images.Item(#)" produces "index" error. Help.
I have two ListViews, displaying the contents of two ImageLists ("ImageList1" & "ImageList2"): (mockup) The goal: User checks a box on the left AND a box on the right, replacing the right-checked image with the one on the left. My code: ImageList1.Im