So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

So, I dropped my phone today on the cement, it works...with minor annoying glitches, has nasty bluish vertical lines and the picture is a tad distorted as well. :/ Does this mean I need to spend tons of money to get this fixed? Ahhhh! Help!

Hi Rahhh829, 
Welcome to the Apple Support Communities!
It sounds like you may want to get your iPhone evaluated for repair. Please review the following web link for information on the iPhone repair pricing and process. 
iPhone Repair and Service - Apple Support
Regards, 
Joe

Similar Messages

  • Error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was

    I recently purchased/upgraded from Premiere Elements 5 to Premiere Elements 9 and I cannot open the projects in version 9 that were created with version 5. It shows it as offline. I get a message to open up a file and when I do i receive the error message: The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channels. Can someone help me or tell what I am doing wrong?  All of my projects that were completed in version 5 cannot be opened up in version 9.
    Thank you.

    Bill,
    I ran G-Spot on one of the files and here it what I have:
    DVD "VOB" format
    MPEG-2 Program Stream << { 1 vid, 1 aud }
    Sys Bitrate: 10080 kb/s VBR
    I guess I am really confused.  The project that I am trying to open PrE 9 was completed in PrE 3 w/templates , scenes, etc. The movie was burned to a DVD.  I cannot understand why I cannot open it with a newer version of PrE.  According to G-Spot (I am assuming this is what you mean above), it is already in 2 channels.  To me this should be ok.  I put many, many hours into these videos and now it seems all for not.
    Here is what I did so far:
    I uploaded the required media files to a new project in PrE9 and let them index and conform.  I saved the project with the same name in a different location.  Do I have to do this to the project files and/or the original media files?  Confusion starts here.
    The next step is where I am confused.  I do not know if I am proceeding in the right direction from here.  There is the share tab in the upper right hand corner.  Is this what you are talking about?  I am truly lost from here.
    Thanks.

  • The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2

    I tryed to link MTS files to a project that I edited with AVI files. I got the message "The selected file cannot be linked because it has 6 audio channel(s) and the clip was created with 2 audio channel(s)". Does anybody know what I should do?

    Relink to the correct media.

  • My iPad screen has developed a vertical line down the middle

    My iPad screen has developed a vertical line down the middle for some reason. I have tried turning it off and resetting it, but the line still appears. Does anyone know what causes this or how it could be rectified?

    Hi JoMayo,
    Thanks for visiting Apple Support Communities.
    If you're noticing lines or distortion on your iPad screen, I would suggest completing step 4 (update iPad) and 5 (restore iPad) in our iPad assistant:
    https://www.apple.com/support/ipad/assistant/ipad/#section_4
    All the best,
    Jeremy

  • My iPod is not syncing with my computer, it has been plugged in overnight, and the circle that turns while syncing is still going, and it won't allow me to eject my iPod, how do I fix this?

    I was away for 6 weeks backpacking in europe with my iPod, and I got back yesterday, and now it won't sync with my laptop anymore, the circle has just been spinning, and I can't eject it. It did charge though.

    - Close iTunes, force close if necessary. Then didconnect the iPod and reboot the computer and try again
    - If you still having problem, reset the iPod . Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next place the iPod in Recovery mode and try to restore.
    - Then try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If you can't turn the iPod off (that is requiored for recovery and DFU mode, then try letting the battery fullydrain. After charging for at least an hour try everything again.

  • I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my dashboard and my mouse still mouving but with a little square with vertical lines at the right. This appen when i was talking with a friend on Skype. I need help to unlook

    I have a IMac - Mac OSX version 10.4 and présently i see only verticals lines on my desktop and my mouse, i mean the arrow and still mouving but with a little square with vertical lines at the right. This appened when i was talking with a friend on Skype, by error i did click on the video and slowly the vertical lines appeared and covered all ma desktop. Since then, it still there and the only things i see it is the vertical lines and the arrow with the little square.
    How can i fix this problem ?
    En français: j'ai un IMac - Mac OSX version 10.4 et présentement je vois seulement des lignes verticales sur mon bureau et ma souris c'est-à-dire la flèche, bouge mais il y a un petit carré avec aussi des lignes verticales à sa droite. Je pense que ce bug est survenu lorsque j'étais sur Skype avec une amie et que par erreur j'ai cliqué sur l'image de la vidéo et peu à peu les lignes sont appurues et tout l'écran est envahie par ces lignes.
    Comment corriger le problème ? Merci à l'avance.
    Réjeanne Blouin

    Hello, sounds like Video card  and/or heat problems.
    Have you blown the dust out lately? Let it cool for an hour or so.
    Get Temperature Monitor to see if it's heat related...
    http://www.macupdate.com/info.php/id/12381/temperature-monitor
    iStat Menus...
    http://bjango.com/mac/istatmenus/
    And/or iStat Pro...
    http://www.islayer.com/apps/istatpro/
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).

  • Will the old iMovie 08 work with lion?  IMovie 11 is a complete disaster.  The worst update I have ever seen!

    Will the iMovie 08 work with lion?  IMovie 11 is a complete disaster.  The worst Mac update I have ever seen!

    It should do, although pretty old:
    http://support.apple.com/kb/HT1010

  • I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

    Can anybody help?
    I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
    Does it have a line in and how do you monitor sound?
    Will I need adaptors and an interface?
    Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
    I see all the upgrades as additional memory or a faster process?
    Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
    The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
    I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
    I have £500 already and willing to add another 500 to 700 pounds, then software extra.

    Can anybody help?
    I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
    Does it have a line in and how do you monitor sound?
    Will I need adaptors and an interface?
    Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
    I see all the upgrades as additional memory or a faster process?
    Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
    The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
    I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
    I have £500 already and willing to add another 500 to 700 pounds, then software extra.

  • I dropped my iPhone 4 while using it. When I picked it up, it would not turn on. I don't have the money to get it fixed right now. What am I supposed to do??

    I dropped my iPhone 4 while using it. When I picked it up, it would not turn on. I have tried charging it. I don't have the money to get it fixed right now. What am I supposed to do??

    You can try resetting it to see if that turns it on, but if it does not work, the iPhone is probably damaged from the fall and you should take it to an Apple Store so that they can have a look and determine if it is repairable.  An out of warranty replacement will cost you money but much less than if you had to buy a new phone.

  • Macbook pro fan making loud noises and going really fast. Now the fan doesn't work at all and my computer gets extremely hot almost instantly. Is there a way to fix it without having to pay a ton of money to have someone fix it for me?

    I've had my Macbook pro for about 3 1/2 years now. It has worked great until recently. A few months ago I noticed that the fan would always run really fast when I was doing simple tasks. After a few weeks/months, the fan was still really fast but it also started to make these loud noises. Now, it only occasionally makes the loud noise if I move my computer after its been stationary for a while. The fan no longer works at all and my computer gets exceptionally hot almost instantly when I turn it on. Is there a way to fix this problem without having to pay a ton of money to have someone fix it for me?

    You can try a SMC reset:
    http://support.apple.com/kb/HT3964
    you can also check this:
    http://www.ifixit.com/Answers/Active?search=replace+fans&csrf=sqmfo0yj19

  • I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER

    I HAVE A BIG PROBLEM I HAVE NOT BEEN ABLE TO RECOVER THE ANSWERS OF SECURITY SINCE THE MAIL THAT APPEARS TO DO THIS MEAN I NEED TO CHANGE THE OTHER SHOULD I DO FOR THE TRUTH WILL MAKE A PURCHASE AND ME THE REQUESTS, AS IS A NEW PHONE EXPECT AN ANSWER PROMPT AND POSITIVE
    so I get looks but that is not my email recovery can help you reset your security information by sending a message to your email recovery: j ••••• @ mail.com

    You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
    They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
    (111384)

  • I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit ? And office pro 2013 64 bit too?

    I am going to buy either a Mac Air or Mac Pro Retina 8GB RAM and 256GB. And as I have to still run Windows programs I will install Parallels 9. As the Mac are both 64bit machines does that mean I need to install Windows 7 64bit or just install 32 bit? (Going with Win7 as I hate Win8). And I will install Office Pro 2013 64 bit too or 32 bit or is that automatically selected by the underlying OS (I use Word, Excel and Access mainly for a membership database of a local club) ? I am not a power user so would appreciate advice on way to go

    Again thank you.  If I only use word, excel and access in the Win environment and Mac OS for email and safari for internet do I need anti virus software . Ie my connection to the world is mac only and I use office pro only to ruin the club, newsletters, membership database etc. and of course anything I do there can drag/drop to the mac environ to email.  That's my understanding anyway.  Next will my existing .pst file copy directly into mac mail or do I have to runs translator  as I recall reading something about that ages ago when I started thinking Mac

  • Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouT

    Every time I make a call or I'm receiving a call my phone is extremely static i can't hear the person on the other line and the person on the other line cannot hear anything They say that they hear a lot of static now my videos when I play a video on YouTube for instance works just fine Siri  works just fine. I can't make a call or receive a call whatsoever because all I hear is static and I haven't dropped the phone in water nothing has really happened this literally happened overnight

    This is a wireless carrier issue.  The fact that the speaker & microphone work properly for other apps is a great indicator that your device is fine.
    Contact your wireless carrier about your call quality issue.

  • I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    I need to back up and sync multiple iPhones to a single iMac.  Each iPhone has a separate Apple ID and the data from each iPhone needs to be backed up separately from the others.  How can I do this without getting all of the contacts, etc. mixed? Tnx

    This might help: http://support.apple.com/kb/HT1495.

  • I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right.  It won't sync with itunes due to an error. What can I do?

    I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen.  It won't sync with itunes due to an error. What can I do?

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    If it does not resolve the issue, the device is permanently damaged and will require replacement.

Maybe you are looking for

  • Transfer entire stock of a plant

    Hi I would like to transfer the whole stock of a plant to another plant. Is that possible without entering all materials one by one? Thanks for your answers Frederic

  • Passing java parameter to javascript function in oa framework

    hi all, can anybody tell how to pass parameter to javascript function from java for example OAMessageTextInputBean txtbean = (OAMessageTextInputBean)webBean.findChildRecursive("BuyerPrice"); String row = "rowid"; txtbean.setOnKeyUp("javascript:checkN

  • Nested schema usage in JDeveloper

    We are building a BPEL process that makes use of a schema nested to multiple levels. Some schema types have an extension to other base types. When trying to create variables for such types, JDeveloper throws an error "Problem building schema" with me

  • MM losing preferences

    Hey all, not a huge deal overall but this seems to be happening more often than ever. Have got the mighty mouse scroll ball 'click' set for Expose, and side buttons for 'Dashboard' . Both preferences seem to be reset back to default every now and aga

  • Finding Average Timestamp

    Hey, I have a table with two columns: FILE_ID (NUMBER), ARRIVAL_TIME (TIMESTAMP). I want to figure out the average ARRIVAL_TIME for a given file. I can't seem to find out how to do this. When I try to execute the following: SELECT AVG(V.ARRIVAL_TIME)