So i have a 32gb ipod classic and the usb port is never recognized??

So my ipod is a 32 gb classic but i can't really use it because the usb port will not connect to my computer or anyone else's. the only reason why it's not completely useless is because i can still charge it using the firewire port but i can't restore it or put new songs on it or anything. i can only charge it. the usb port on my computer works just fine so i'm thinking the problem is with my ipod. any suggestions on how to confront the problem??

What you maybe missing are the cables, the current USB iPod Dock cables dont work on this iPod, the
M8948LL/A* - A1040 was designed before Apple switch over from Firewire to USB2.0. for all iPod interface.
If you want to use it on a Windows PC, you got to format to FAT32, and your PC must have Firewire (IEEE 1394 port), for syncing or
else you got to get a special "iPod Dock Connector to USB 2.0 + FireWire Cable" from Apple store (I dont think they have it in stock but you can try eBay or Amazon. But these are meant to be used by connecting the Firewire to the Wall Charger and the USB end to the Windows PC USB2.0 port. If your PC has both USB and Firewire, and you connect them both simultaneous, it will corrupt your iPod formware.
It can connect to Macs that have Firewire ports, you can try Mac with USB2.0 port, but I dont think it will work.
Stick to Mac, it will give you less problems.

Similar Messages

  • Do you have trouble with iPod Classic and Ford's SYNC?

    Anyone have trouble with Ford SYNC recognizing iPod Classic? When I first bought my Lincoln my iPod Classic worked perfectly--just like it should with Ford SYNC. But a few months ago, when I plug in the iPod using a USB cable I get the message on Ford Sync that says, "incompatible device". At first I thought it was a ford problem so I began testing using a 2010 Buick and a 2010 Lincoln Navigator. My iPod classic doesn't work in either. However, a iPod nano works perfectly in either car. Also if I put some of my music on a flash drive it works fine in the Lincoln. So, I'm convinced that the problem is some type of update that occurred to my iPod or to iTunes.
    I have tried several iPod Classics and several USB cables so it is definitely aiPod Classic software problem. By the way, my iPod Classics work fine by themselves--just not through Ford's SYNC.
    I'm pretty lost as to possible solutions.
    Thanks,

    I have done some experimenting and testing with my old Classic iPod that uses operating system 3.1.1. I don't think this operating system has changed. However, later generation iPods such as nano, shuffle that use a different operating system seem to work absolutely perfectly in my 2010 Lincoln Navigator, especially the ones without a hard drive (i.e. flash drive). My conclusion is that the Ford SYNC updates have somehow not been backward compatible with the older operating system. I know this can be attributed to Apple for part of the problem but I suspect that Ford somehow did not do enough testing with the older iPod operating systems. Turns out there are probably 7 or more operating systems on iPods and while you would assume that "backward compatibility" is a no-brainer, that seems not to be the case with second party vendors such as Ford SYNC. Personally, I have given up trying to solve this problem and have gone to flash drive and a "line in" option. My old Classic iPod works exceptionally well, plus I have a spare so I can probably use these thing till "H freezes over". Being a older retired American these things may actually last a life time!

  • I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

    I have an iPod Classic and the latest version of iTunes. I make all my purchases on my computer, but when I try to click the "add to" option and transfer the songs to my iPod, it doesn't work. How can I get my songs from my computer to my iPod?

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your PC and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    B-rock

  • I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format"

    I have restored my iPod classic and everything has been wiped off, now when I connect it to the laptop, iTunes doesn't recognise it and windows won't format it, an error message comes up "unable to format". Can someone please help me sort this problem, it's so frustrating!!!!!!

    It could be an indication or a damaged or dying hard drive.  I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread.  He also covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • I have a 80gb ipod classic and i cannot get it to sync anymore since I updated my itunes. Does anyone have any suggestions on what i should do

    I have a 80gb ipod classic and i cannot get it to sync anymore since I updated my itunes. Does anyone have any suggestions on what i should do?

    Does the device show up in Windows Explorer when connected?
    Have you tried going into Control Panel > Programs & Features > iTunes > Repair?
    Have you proved the cable with a different device, or the device's connectivity with a different computer?
    tt2

  • I have an old ipod mini and the screen was broken, can it still be repaired?

    i have an old ipod mini and the screen was broken, can it still be repaired?

    Yes.  You can choose to have it repaired by Apple or a 3rd party repair company.  Here are Apple's repair qutoes.
    http://www.apple.com/support/ipod/service/prices/
    A simple Google search for iPod Mini screen repair should give you a number of results. Here is one option.
    http://www.ipodrepair.com/ipod-repair-mini.htm
    And kudos to still using an iPod Mini.
    B-rock

  • If i have a older ipod nano and the srceen is bounceing and jumping around and is fuzzy how can i fix it?

    if i have an older ipod nano and the srceen is bounceing and jumping around and the screen is fuzzy how can i fix it?

    If none of the 5 Rs of troubleshooting resolve the issue, it's likely hardware related.
    http://www.apple.com/support/ipod/five_rs/
    B-rock

  • I have an iPod 5 and the charging port is broke, it won't charge. I know it's not my charger, how do I charge my iPod

    I have an iPod 5 and the charging port is broke, it won't charge. I know it's not my charger, how do I charge my iPod

    If not covered by the AppleCare+ warranty,
    Apple will exchange your iPod for a refurbished one for $99 for 16 Gb 5G and $149b for the other 5Gs. They do not fix yours.
    Apple - iPod Repair price                                    
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens         
    Replace the connector yourself if you are up to it
    iPod Touch Repair – iFixit                  

  • HT4356 I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    I have an older HP connected to the usb port of my Time Machine, and have it shared.  I want to print from my iPhone on the network, but it can not be found in airport?  How do I make this work?

    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Read through this for information about Airprint printers and how to use them:
    http://support.apple.com/kb/ht4356

  • I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

    I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?

    matthewfromwhangarei wrote:
    I have a 2009 Mac mini and the wireless card has never worked, would I be able to cover it with my three year extended warranty?
    If you mean AppleCare, then I would believe the answer will be yes.
    First make sure you have a full backup of everything on your Mac, then run, don't walk to your nearest Apple store.
    Note: Due to your Mac now being in computer years, somewhat elderly, Apple may not have the require parts in stock. This will either mean you might have to leave it with them for a number of days, or maybe they will offer you a new Mac mini. While a new Mac mini (if offered) might be a welcome possibility be aware that the new Mac mini no longer has a CD/DVD drive and it comes with Mac OS X Lion and as a result might not run some of your old software.

  • HT3910 I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings.  I've been reading the help but I don't seem to have a re-install drive for the USB port.  Is this something post 2008 or can I get one from somewhere?

    I am selling my Macbook Air 2008 and need to reformat it back to it's factory settings.  I've been reading the help but I don't seem to have a re-install drive for the USB port.  Is this something post 2008 or can I get one from somewhere?

    Hey Stella,
    Welcome to Apple Support Communities, and thanks for the question! I'd read through the following article before selling your Mac - it'll include instructions on how to reformat your hard drive:
    What to do before selling or giving away your Mac
    http://support.apple.com/kb/HT5189
    All the best,
    David

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • While charging my ipad when i plugged in the adapter, the adapter and the usb port gets very very hot... Is this normal? I replaced my ipad and adapter but the problem still exist.

    While i charge my ipad with adapter the adapter more specifically the internal round cell of adapter and the usb port becomes very very hot... And ultimately my ipad back starts heating a bit. Is that normal?

    Take your charger, cable & iPad to an Apple Store for evaluation.
    The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
     Cheers, Tom

  • My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it.

    My computer has Bitlocker encryption. When I plug in my iPod Shuffle to the USB port, iTunes does not recognize it. When asked to encrpt the Shuffle I say no, but still not recognized. When I encrypt it, still not recognized (even after it was restored by iTunes). Any suggestions please?

    Did you find a solution?
    My touch is doing the same thing.

  • IPod Classic and the new software upgrade

    I've had my 80GB iPod Classic since December. I loaded it up with all my music and hadn't plugged it back into my computer until a couple days ago. I got a notice to update my iPod software so I did and it came back that it couldn't because there was an unknown error. Not only that but after I ejected it from there I wasn't able to restore it automatically) all my music was gone. A couple days have past since then and I've not gotten around to restoring it, which it suggested. It told me it would be reappear in the iTunes window when it was done. Since then it hasn't shown up and I've been prompted twice to restore. Has anyone else had this problem?? Can someone help me out?? It's now nothing but a blackish-grey screen with the apple icon. It's not even registering on my computer......

    I've tried all afternoon to get it fixed and I think I finally found the answer. To all of those 80GB iPod owners having problems with the reset please try this, it worked for me!
    iPod Classic keeps Continuously resetting at Apple Logo
    Posted: Mar 6, 2008 1:45 PM Reply Email
    Okay, I have sent in my iPod Classic, and let me just say its AWESOME! Okay first I found that other people were having a problem with the NEWEST iPod Continuously resetting at Apple Logo. There is a 10 step process in getting the help you need, follow these instructions:
    *I got these from Jimmy_Dean, thanks bud...*
    10 Simple Steps To Fix Your iPod That Is Stuck In A Continuous Reset Loop:
    1) While the iPod was resetting itself over and over (continuously resetting itself), press the Play/Pause button and the center select button simultaneously, for about 5 seconds, and it will display that it is now in disk mode.
    2) Start up iTunes on your computer and then connect the iPod to your computer with the USB cable.
    3) Click on the iPod in the left pane, select "Restore" to restore it to its original blank state. Follow the prompts to continue.
    4) When the computer completes the Restore update, and it displays a message saying that the iPod will disappear and reappear in iTunes in a minute, immediately disconnect the iPod (unplug it from your USB cable).
    5) On the iPod, you should see the main menu, in a few seconds. Pick a couple of settings to update for example the English language, and Eastern Time Zone (New York or Washington, DC), etc.
    6) Press and hold the Play/Pause button to power the iPod off.
    7) Re-connect the iPod to your comptuer with the USB cable.
    8) Start syncing using iTunes, as normal.
    9) All should be well.
    10) Remember to always click on Eject in iTunes, and waiting for visual confirmation, before disconnecting the iPod.
    If these do not work, please go to:
    https://selfsolve.apple.com/GetWarranty.do
    This site brings you to a step by step process in getting your iPod fixed. Its very hands on, and the day I requested a repair or a replacement, they sent me a box. I got it in less that 1 day! Mind you that was the 4th of March when I requested the box. I got it the 5th of March, and I sent it in that same day with NO CHARGE! Apple pays for it if you have the warranty, if your iPod is in the first 180 days of purchase (they can tell), everything is free unless its obvious that you dropped it or something like that. Anyways, I got an email toay (March 6th), that says that they have recieved the product and are diagnosing it. Thats really fast, mind you! Well, I am now waiting for that, and then they will let me know if they can fix it or have to replace it. In that case, I will NOT BE CHARGE A PENNY for the services, they told me the process is really fast and I will get my iPod back in a few weeks at most.
    So a total of 2 weeks for everything at most FOR FREE, thats a deal!
    I live in a city that DOESNT have an Apple store in it (Colorado Springs, Colorado) and I am on tour ALL the time with bands, and I am just lucky everything is coming together fast and smooth!
    If your city has an Apple store, you can check here:
    http://www.apple.com/retail/
    You can bring it to them and they will tell you if they have to replace it or fix it, if you can get a NEW iPod for free TAKE IT there and then. You will save time and effort!
    Let me know how this helped on this blog!!!
    Thanks everyone,
    Matt (Zero)
    -Rise Records
    -Victory Records
    -Strike First Records
    -Pluto Records

Maybe you are looking for

  • Using Apple TV on a network not connect to the internet.

    I am trying to use my apple tv on a network that isn't connected to the internet.  It dones't seem to want to allow me to stream my content because iTunes wants to authorize.  Is there a way around this?  If not is there a way to connect an Airport r

  • IPhone no longer syncing with Calendar

    Since I downloaded the latest iPhone update, my phone no longer syncs with my calendar. There is no error message. How can I fix this?

  • Changing 'ownership' of MacBook Pro

    I recently purchased a MacBook Pro (2008 model) and I'm running 10.8 on it. I changed the administrator information to reflect my information but when I view the HDD info, it still shows the previous oner's name. How can I change this? -Thanks in adv

  • Failing to execute Sybase Stored Proc on startup

              This problem has been encountered while upgrading from weblogic 5.1 to 8.1: when           a connection is used in a connection pool with the attribute conn.setAutoCommit(true),           we get an error message:           <<Cannot set auto

  • Help, out of memory error

    Hi all, I have been developing a Java application, which reads a text file and shows it as a table. In the table model (adapted from AbstractTableModel) I use, the core data structure is a 2D array. Since the text file is stored based on a 2D array u