So I need a little help. Starting Thursday night I was on my iPad and all of a sudden the screen went black from left to right. Ann then Saturday night it kept doing this every time I put it on. I tried rebooting it. Any suggestions?
What the title says
Had a call with the apple support and my ipad will be replaced with a new one.
I think you have to call apple too, because there seems no way to get it up running again.
Similar Messages
-
ipod 5th generation will not turn on, charge, or connect to macbook laptop. i was using it for music then all of a sudden the screen went black and was unresponsive. i have tried using other cords. also my home button is broken. someone please help!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
However, I took some screenshots and when I went to upload the pictures to my Mac, the screenshots uploaded. So I believe my phone still is working but the screen is just not turning on. I tried holding down the home and top button for ten seconds, even longer, but nothing occurred. I am hoping to find a possible solution so I do not have to buy a new phone. Thank you!
The backlight burned out from getting it wet. You will have to replace the screen at a 3rd party shop, buy a screen and replace it yourself, or make a Genius Bar appointment at your nearest Apple Store and do an out-of-warranty replacement for $199 USD.
-
I just went to update my iPhone 5S as it asked me to, and it got to the point with the apple logo on the screen and the black loading bar underneath, but then the screen went black and the phone now won't turn on? I went to plug it into my computer and it said "USB Device not recognised"..
PLEASE HELP ME! It's 1am here in england, I need to be up at 6am for work and won't be able to get up without an alarm... my only option is so stay awake!Nothing happened, i managed to get my computer to recognise it and now restoring... but it says 3 hours remaining?! Will i lose everything?
-
Had it for about 2 years, more or less. When i try to restore it a screen on my itunes comes up that "it couldn't be restored. error (1434)".
Most likely, it is the scream of death for your iPod Hardisk.
Do the disk diagnostic as posted by tt2
https://discussions.apple.com/message/17028567#17028567
But if the diagnostic show no issues, then try another USB Port, read this Apple support article on your 1434 error.
http://support.apple.com/kb/TS1372
Good luck! -
I'm scared!
Welcome to Apple Discussions
Since we know nothing about the age of your machine, and the OS you're using it's rather difficult to offer any reliable help.
Help us help you. The more complete the description of your problem is (which MacBook Air you have, which OS you're using, ) the more useful assistance we can provide, and, the sooner we can provide it..
This might be a reoccurring phenomena of Mavericks - a sleep/wake issue has caused many similar behaviors. It might be a conflicting software issue, or a true hardware problem with your particular machine. More details from you can shed more light. -
Any hints as to what might be wrong with my ipad mini? Just stop working, does not respond to charging.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!
Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda. -
when i start downloading a CD purchase it downloads approx 3 to 4 songs then just stops says downloading waited a hour still downloading had to force quit iTunes then reopen to complete download keeps doing this every time i purchase a cd any ideas ?
I too am facing this problem, however a little differently. I am in the process of uploading my vinyl collection to digital format in Audacity and am having this problem with multiple tracks when played in iTunes. The first few albums I ripped play just fine in iTunes, but the last few skip over about the last minute of every song and go to the next song. As you said, if you drag the time marker past the skipping point though, the rest of the song will play to the end just fine. I then synced these songs onto my iPod and they play perfectly straight through. I was leaning toward a bad mp3 encoding process that was maybe creating a glitch but I'm not sure at this point if they play correctly on my iPod. In quicktime the song will just stop playing at that specfic point, but if you hit play again, it will continue to the end. I can say though, I haven't seen this problem with any iTunes download, or ripped CD that I have ever put into iTunes (which makes my situation a tad different than yours), it's been purely the songs that I have imported via Audacity from LP's.
-
Every time i try to start itunes it trys to backup my ipad and says an error stopped the program working and closes down??
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you! -
My phone started vibrating mutiple times last night and the screen went black, and then it stopped and now I dont have a clue what to do. How should I fix this problem because I cant turn it back on? I have only had my phone for 2 months.
I also live an hr away from the Apple store, so its not the best thing to go there just to ask a question and find out what to do
-
Hello. I dropped my ipad, first gen, from my chair to the floor. The screen went black and I can't start it again. I have tried to hold both buttons down at the same time, but nothing happens. Any help?
You will probably have to contact Apple for repair but before you do try this:
Turn your iPad upside down on your lap and give it a hard smack on the back. -
after the install upgrade my imac wont load anymore i tried to do a safe mode load and wehn i do at the end of it it tells me that i have a "systemShutdown false" what does this mean
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partitirion & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
This is making me really mad I have an iPhone 4s and all off a sudden the volume slider disappeared and now it won't let me turn up my volume I have reset restored done the tooth brush trick blew into it and everything an it still wont work someone help!!
Is that the only solution? This just happened to me last night and I though that maybe it was just acting up and it would be fine this morning but it wasnt..
-
(Mountain Lion) suddenly the screen turns black, and I have to use the on/off switch to turn it on. And, the screen turns to zoom, and the only way to return to normal is to close the window and start all over again?
Does the screen go black while you are using the machine? ...or after it has sat idle for a bit?
If it happens while you're using the machine, check to see if a hot corner has been set for sleep. You can do that here: System Preferences > Desktop & Screen Saver > Screen Saver and click the button labelled "Hot Corners..." in the lower right.
If it happens after a bit of idle time, that's normal sleep behavior. The delay can be adjusyed here: System Preferences > Energy Saver.
In either case, pressing any key on the keyboard should bring it out of sleep.
Re zooming -
If this happens while in Safari, and you are using an Apple Magic Mouse, a default setting applicable to it is that a soft double-tap on the mouse will zoom the Safari window. A second double-tap will bring it back.
If it is the entire screen that is zooming, Control plus scroll gesture on the mouse will zoom the whole screen. Repeat with the opposite scroll gesture to bring it back.
Maybe you are looking for
-
Searching for a better design for function in sql where clause
We are using for a while a parameter management framework based on parameter hierarchy and matrix fully internazionalized. For implementation flexibility we never use primary key to access directly the parameter but used a function that return the co
-
Can't get Nvidia to work in new kernel
Hi, Yes, I know, loads of people have problems getting this to work and it has been posted thousands of times...but yet I can't do it! I've been trying for days, googling, reading the wikis and forums, but it won't work for me at all! I guess I'm doi
-
Debugger wont trace source.
What the!? The Flex environment is great. Debugs well. I especially like the "Expressions" watcher. However, if I place my script code into files then the debugger ignores every break point in those files. For example, if I have a component and use t
-
EEM/SSH onto another device: Can I avoid password in cleartext?
Hi All I would like to create an EEM script on Switch A which ssh's onto Switch B to run a second EEM script. After looking on the Cisco site and forums, I believe the following would allow me to do this: Switch A event manager applet Script1 action
-
I am having some sporadic and unexplained errors turning up because of database connections. Is it common or okay to create a database connection and then pass that connection as a parameter to other classes' functions. Here is some pseudocode of wha