So if connected to a router u can find a stolen Mac pro

On mobile me can u find Mac pro

iCloud, not Mobile Me, and it isn't by any means guaranteed.  In fact it's more unlikely than likely.
Using Apple's Find My Mac Feature - NYTimes.com - http://gadgetwise.blogs.nytimes.com/2011/11/25/using-apples-find-my-mac-feature/  - location works off information about wireless station, not GPS.
iCloud now features Find My Mac service - http://www.tuaw.com/2011/10/13/icloud-now-features-find-my-mac-service/

Similar Messages

  • My g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

    my g3 os 9.2.2 is connected to airport router. i can print from my pwerbook but g3 does't see the printer

    Yes, when I bought my powerbook and airport and first set it up the chooser showed the HP 842C printer.
    The printer is connected to the USB on the Airport.
    The PB sees the G3 as a server (2 hard drives).
    Do I need to set up the PB as a server on the G3? How do I do that?
    I've tried Apple share, but when I try to connect to PB address or the name the G3 freezes.

  • Can i sync my mac pro with my mac book?  i mainly want to do this for iTunes and iPhoto?  I also have an iPhone and an iPad.

    can i sync my mac pro with my mac book?  i mainly want to do this for iTunes and iPhoto?  I also have an iPad and an iPhone.

    Do you have a local network setup either wired or wireless? If so, then have both computers connected to the network. Enable File Sharing on both computers in Sharing preferences. Select the startup drive on each computer. Press COMMAND-I to open the Get Info window and check the box labeled, Shared Folder.
    You can now keep both computers in sync by using a third-party backup/sync utility that will work with a network setup such as:
    Data Backup
    Deja Vu
    Silver Keeper
    Retrospect
    Super Flexible File Synchronizer
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • How can I upgrade my Mac Pro

    Hello,
    I have a Mac Pro. Here are the specs :
    Mac OS X 10.5.8
    MacPro1,1
    NVIDIA GeForce 7300 GT
    When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
    OpenCL
    requires one of the following graphics cards or graphics processors:
    NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
    ATI Radeon 4850, Radeon 4870
    Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
    Thank you for any help and/or information !

    Dalfe wrote:
    Hello,
    I have a Mac Pro. Here are the specs :
    Mac OS X 10.5.8
    MacPro1,1
    NVIDIA GeForce 7300 GT
    When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
    OpenCL
    requires one of the following graphics cards or graphics processors:
    NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
    ATI Radeon 4850, Radeon 4870
    Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
    Thank you for any help and/or information !
    It's been a while since I've used it but I installed Snow Leopard on my old Mac Pro 1,1 with the 7300GT and it worked. OpenCL may not have but the rest of it did. I don't think what you've quoted says you can't upgrade but only that an upgrade won't deliver all of the features in Snow Leopard. Indeed, I was able to move the HD in the 1,1 Mac Pro into the 5,1 Mac Pro, boot from it (10.6.4 is the minimum the 2010 Mac Pro will boot with), clone it and then updated it.

  • What is the maximum GB I can have in my MAC PRO?

    My Mac Pro specs:
    Hardware Overview:
      Model Name:    Mac Pro
      Model Identifier:    MacPro5,1
      Processor Name:    Quad-Core Intel Xeon
      Processor Speed:    2.4 GHz
      Number Of Processors:    2
      Total Number Of Cores:    8
      L2 Cache (per core):    256 KB
      L3 Cache (per processor):    12 MB
      Memory:    16 GB
      Processor Interconnect Speed:    5.86 GT/s
      Boot ROM Version:    MP51.007F.B03
      SMC Version (system):    1.39f11
      SMC Version (processor tray):    1.39f11
    Im wondering what is the most GB of hard drive space I can have in my Mac Pro?  The Apple representative on the phone said I could only do 8GB?  Is this correct?  I was thinking about maybe getting 3Tb internal hard drives, but that would exceed the limit apple representative said of a total of 8GB hard drive max?
    Did I miss something?

    Did I miss something?
    Yes, what does "GB" refer to here?  Is it hard drives or memory dimms?
    If it's hard drives you can put any size SATA drive in your mac pro drive bays.
    If it's memory dimms refer to OWC's charts for your model to see what you can add.  So for a 5,1 (2010 Mac Pro) you could fill the slots with 8GB dimms.

  • HT201364 Anything I can do to my Mac Pro 2007 so it accepts an update to Maverick?

    Anything I can do to my Mac Pro 2007 so it accepts an update to Maverick? I'm currently at 10.6.8
    Model Name:
    Mac Pro
      Model Identifier:
    MacPro1,1
      Processor Name:
    Dual-Core Intel Xeon
      Processor Speed:
    3 GHz
      Number Of Processors:
    2
      Total Number Of Cores:
    4
      L2 Cache (per processor):
    4 MB
      Memory:
    2 GB
      Bus Speed:
    1.33 GHz
      Boot ROM Version:
    MP11.005D.B00
      SMC Version (system):
    1.7f10

    Well, there are tricks in the Internet to install OS X Mavericks in that computer based on the use of emulators (because you cannot run OS X Mavericks due to your Mac firmware). However, they are risky and illegal, and we cannot provide support for them.
    Instead, you can only upgrade your Mac Pro to OS X Lion officially > http://store.apple.com/us/product/D6106Z/A/os-x-lion

  • I can't get my Mac Pro pair with the ipad

    I can't get my Mac pro pair with the iPad

    For what purpose? It isn't possible to transfer files by way of Bluetooth from the iPad to Mc.
    Stedman

  • Where can I purchase new Mac Pro in RSA?

    Where can I purchase new Mac Pro in RSA?

    Use the link here to find a Reseller...
    http://www.apple.com/za/buy/

  • Can a shell for mac pro 13" be used with a mac pro Retina ?

    Can a shell for mac pro 13" be used with a mac pro Retina ?
    Thank you.

    No.
    The entire enclosure is tuned for both external jack placement, EMI-RFI radiation, airflow, and for cooling. You need exactly the correct shell and fans for the electronics you wish to install in it.

  • Can you boot a Mac Pro using a USB Pen Drive?

    Hello.
    Can you boot a Mac Pro using a USB Pen Drive? OS=Windows or Linux or BSD or MacOS... I know it is bios specific on a PC if the option is available. If this is possible, does anyone have a link to instructions?
    Thanks,
    Scott

    Not to get in to an argument over semantics here, but by saying "Windows should boot if you have installed the requisite Boot Camp drivers," you are implying "that the Boot Camp drivers [are] needed for Windows to boot." I was just clarifying your post so people didn't get confused.
    As for booting a Mac Pro off a USB flash drive, if you have been successful in doing so, can you share with me your method? I've tried booting of an OCZ Rally2 4GB flash drive and it's never worked on my Mac Pro. It doesn't show up when I hold option down and if I try to boot through rEFIt, I get an error about my Mac's firmware not supporting USB booting (I have the latest firmware installed, too). I've tried GPT and MBR partitions, both to no avail. Booting off USB hard disk drives is no problem though. And I can boot off this flash drive on a Core Duo iMac.
    Any ideas?

  • Can I buy a Mac Pro in the U.S., with a German keyboard?

    can I buy a Mac Pro in the U.S., with a German keyboard?

    The Mac Pro Tower is NOT a laptop computer. It weighs 65 lbs, and holds four  full-size Hard Drives. It uses a detachable keyboard.
    US English
    Western Spanish
    French
    Japanese
    ... are readily available at the Apple Online Store, in wired and wireless.
    For German, you would have to call them and make special arrangements, or pick one up an additional keyboard when you get back home.
    This thing won't fit in your suitcase. Are you sure you want to pay to ship it home again? I would be tempted to sell it when you are leaving, and buy a new one at Home.
    A laptop would be a better choice. These are also available with the same four choices of languages (in all models) through the online store.
    You can make all the German characters and accents with the USEnglish keyboard, but some are two keystrokes.

  • Does an AE connect to my router's wifi signal or my Mac's?

    My Mac is connected to my router via a DLAN device for a solid network connection, but my AEs are flaky - should I try and extend the Mac wifi signal with the AEs (and can I connect to AirTunes at the same time), or should I try and extend the router wifi?  Not really sure how this all works, sorry if a really stupid question!

    There are a number of DLAN devices, but I am going to assume that you are using a Powerline-like device to connect your Mac back to your router. As you know Powerline devices are used to create a pseudo Ethernet connection using your home's electrical wiring. If this is what you are referring to, then you can share this connection via the Mac's wireless adapter. However, you cannot extend this wireless network with an AirPort base station.
    For iTunes streaming, you need either a wired or wireless network for the iTunes host to stream to an AirPlay speaker. That speaker could be an AirPort Express base station, Apple TV, or a device that supports AirPlay.

  • Failing to connect through AFP and FTP from the Internet on Mac Pro?

    Hi all,
    I have tried to access my Mac Pro (located at home) from my work place without any success. I used to do this on a regular basis with my old G4, and never faced any problem.
    All the boxes are ticked in the Sharing Prefs pane, I have keyed in the correct IP address to access my machine, and for some obscure reason it simply doesn't work...
    I'm sure someone must have tried this, I'll be interested to know if I am missing something somewhere...
    Looking forward for an answer here!!
    Thanks,

    Hi Ned,
    You have hit the right spot! I couldn't remember having set up this NAT for my G4, that was too long ago, but I went back into the Belkin Router and readjusted the settings, and it's all fine now!!
    For those interested, it took me a while to find out that with the Belkin 4-Ports Router, you can only direct the traffic for AFP or FTP to ONLY 1 IP Address... A bit short in my case, but I manage to find a workaround where I have assigned 1 IP address for the Mac Pro to do AFP (File Sharing) and 1 IP address on my old G4 to do FTP (File Transfer Protocol)...
    And if anyone needs help to connect to their home machine while physically being in another place, I'll be happy to help...
    And it's happening!
    Thanks again Ned, well spotted!!!
    Cheers,

  • Can't Login to Mac Pro

    My boyfriends Mac Pro won't allow him to login. We used the install disk and tried to reset the password
    but it says the password cannot be saved.
    Can some one help!

    I'm connected to wifi.
    And I have no firewall.

  • Can I restore a Mac Pro with a .dmg made from a 10.6.8 iMac?

    Is the above possible?
    This article gives the following list of files to be removed before restoring to non-matching hardware:-
    sudo rm /Volumes/imageName/var/db/BootCache.playlist
    sudo rm /Volumes/imageName/var/db/volinfo.database
    sudo rm /Volumes/imageName/System/Library/Extensions.kextcache
    sudo rm /Volumes/imageName/System/Library/Extensions.mkext
    sudo rm -r /Volumes/imageName/var/vm/swap*
    However the article dates from 2004 and the days of 10.3.  In my experience the only one of these files that still exists in the same location is volinfo.database while Extensions has become a directory.
    Can anyone offer an updated list of files to remove to image to non-identical hardware?  Or other advice on not having to spend 2 days or so building an entirely new image from scratch.
    Thanks in advance,

    A standard retail 10.6.8 system from an iMac should work without modification on a Mac Pro. I've done this myself many times. The last Mac Pro model came with 10.6.4 installed.
    My MO is:
    Repair hard drive and permissions on Source.
    Clone Source to another hard drive using the Restore option of Disk Utility.
    Test boot the clone to be sure it works.
    Connect clone to Target machine and boot it from the clone.
    Use Disk Utility's Restore to restore the clone to the Target.
    Disk Utility can do this much faster than it takes to make a disc image. Furthermore, DU verifies the copies which precludes problems. Disc images on the other hand can be flakey and unreliable. They are also more easily corruptible than a clone. And, you can boot a clone. You cannot boot from a disc image. Third-party backup utilities can also be used to maintain incremental backups to the clone so you always have a current backup.

Maybe you are looking for

  • When I try to download update, I save the file as directed. However, the update is not applied. How do I apply the update for Firefox?

    I am being prompted to download the update to a new version of Firefox. When I click on download, I receive a window to save the file. I save the file instead of canceling. After the download has been saved, my version of Firefox still has not been u

  • How to use parrallel cursor in this code

    hi can anyone expalin me how to use parallel cursor for this code ...  loop at itabkpf.       read table ibsegpar_fu with key                  belnr = itabkpf-belnr                  gjahr = itabkpf-gjahr                  bschl = '25' . Start insert b

  • H1 footage & premiere deinterlace encoder questions.

    Hi all, I recorded some footage on a H1 in 60i HD (HDV). Used Premiere CS3 preset HDV 1080i 30 (60i) to capture it. Capture question... 1. Should i buy cineform aspect or prospect HD to convert it before editing in premiere CS3? Adobe media encoder q

  • Essbase Data Mining from Essbase Administration Service Console

    Hi there , Have anyone had tried essbase data mining feature that can be use from EAS ? I tried to learn from dbag but seems we need more comprehensive step-by-step guidance on how to implement such feature.. Thanks

  • Some basic help in Threads

    Hi all, I have some basic problem regarding use of thread.I have a class A (with main method )which creates 5 instance of class B say b1,b2,b3,b4,b5.This class B extends thread. Now within main of A i spawn 5 thread by calling b1.start(),b2.start(),b