SO items are refreshed after showing error message in VA01

Dear experts:
I have a problem in VA01, please kindly help me.
If we use the expression " message err_msg type 'E' " in userexit_save_document of MV45AFZZ , the system would show pop-up window with message "Item 000010 does not exist", then I can only quit VA01 screen and input SO data again.
Why the so items are refreshed and how to solve this?Thanks a lot!

Hi,
Bcoz you are using Error ("E") message .if u will use meassage type 'W' or 'I'(information) it will not happend. use any one.
OR if want only error message u have to use in AT EXIT-COMMAND.
regds,
paras

Similar Messages

After Showing ERROR message make the field editable in subscreen.

Hello Experts,
I have a requirment where i have added a subscreen to the standard screen of ME31K for creating the contract. In my Subcreen i have my custom screen fields that i'm updating in EKKO table through include structure.
Now if user forget to fill the details in my custom fields in the subscreen then i'm giving the error message prompting the user to fill the value in fields.
But the problem is the screen is locked there itself i want to make the field editable so that user can enter some value in the fields. I can not use the stuatus or information message here because doing this i will get the item overview screen which should not come as i want to restrict the user to header details only and fill all the custom fields.
Please provide me with your helpful responses.
Thnaks,
Naveen

Hi Naveen,
Sorry for the delay.
The code which I gave for popup, i hope its being shown in an IF . . . ENDIF.
So in that condition u can add the following :
IF < ur condition >
   < Call message FMs >
    SET SCREEN SY-DYNNR.   "this would set screen to current screen which is 0201
    EXIT.
ENDIF.
Other than this if you like you can set some parameters in the PAI of this screen which redirect to current screen based on some conditions.
So u can manually set OK-CODE and CALFCODE as SPACE, but i dont know how much this can impact the process.
So please follow the above code.
This is available in
Main Program     SAPMM06E
Source code of   MM06EF0F_FCODE_CALL
IF OK-CODE EQ SPACE AND
   CALFCODE EQ SPACE.
SET SCREEN SY-DYNNR.
EXIT.
ENDIF.
Hope this helps.
Regards,
Ateet

Download error under apps. After following download steps multiple times still showing error message.

Download error under apps. After following download steps multiple times still showing error message.

Hi There,
Kindly try the below mentioned links.
Creative Cloud Help | Download Error in Apps tab of Creative Cloud Desktop Application
Creative Cloud - Download error - stubborn error
Thanks,
Atul Saini

After each Error Message,the follwing messages are in Scheduled in ECC SMQ2

Hello Everyone,
After each Error Message thrown from ABAP Proxy, the next following messages are in Scheduled in ECC SMQ2 tcode. Can anyone suggest me how to overcome from this issue?
Thanks,
Prashanth

Hello,
Please, any one respond to my question. I have been trying to get out of this issue but could not.
Thanks,
Prashanth

af:message sometimes does not show error message

Have a page that has a popup to show some information.
In page, used this to show error message that occured during save.
          <af:messages globalOnly="true" inline="true" inlineStyle="padding:10px;" id="m4"/>
In popup, used this to show error messages that occurred while performing some action.
          <af:messages globalOnly="true" inline="true" id="m2"/>
Whenever any error occurs while performing some action in page, error message is shown.
Then open the popup
Whenever any error occurs while performing some action in popup, error message is shown properly in popup
But after closing popup, not able to show any error message in page. In bean error message is added to FacesContext, but not shown in UI.
What would be the problem here?
JDev version: 11.1.1.6.0
Thanks,
Bhaskar Pola

Thanks Vinay for the link. However still facing the issue.
This method will be invoked from page.
    public void onDelete(ActionEvent actionEvent) {
        RowKeySet rksSelectedRows = table.getSelectedRowKeys();
        int count = rksSelectedRows.getSize();
        if(count == 0){
            FacesContext facesContext = FacesContext.getCurrentInstance();
            facesContext.addMessage(null,
                                    new FacesMessage(FacesMessage.SEVERITY_ERROR,"Atleast one row should be selected.",null));
            facesContext.renderResponse();
        } else {
           ADFUtils.showPopup(deletePopup);
This method will be invoked from popup withing same page.
    public void multipleSelListner(ActionEvent actionEvent) {
        List<String> list = (ArrayList<String>)ADFUtils.getPageFlowValue("selList");
        try {
            if(list != null && list.size() > 0){
                if(list.size() > 25){
                    error = true;
                    FacesContext facesContext = FacesContext.getCurrentInstance();
                    facesContext.addMessage(null, new FacesMessage(FacesMessage.SEVERITY_ERROR,
                                            "Maximum 25 items can be selected.", null));
      facesContext.renderResponse();
                    return;
        } catch (SQLException e) {
            System.err.println(e.getMessage());
            e.printStackTrace();
I have removed some extra code...
Looks like problem is with 2 af:message tags. When popup shown with error message second af:message within popup gets preference. Subsequent messages are pointed to that one.
May be related to unloading popup content from document. Not sure though.
Thanks,
Bhaskar

While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
== Today ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

When deploying the webdynpro java application , showing error message

Hi Masters,
when deploying the webdynpro java application , showing error message. Please reply why this problem showing and what is the solution
But Iogin to sdm tool ( remote gui .sh) with same password, which password i am using for deploy the webdynpro java application.here in sdm tool i am able to login. and i restart the sdm , and again trying to deploy the same problem it showing.
URL to deploy : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Result
=> deployment aborted : file:/C:/DOCUME1/ppuser/LOCALS1/Temp/temp30925rupa.com~sales.ear
Aborted: development component 'sales'/'rupa.com'/'LOKAL'/'0.2010.02.13.14.32.39':Caught exception during application deployment from SAP J2EE Engine's deploy API:com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [devsap] with user name: [J2EE_ADMIN] Check your login information. Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: No login module succeeded.] (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).DMEXC)
Deployment exception : The deployment of at least one item aborted
Edited by: sujana mullapudi on Feb 13, 2010 2:52 PM

Hi Sujana,
For deploying Web Dynpro for Java application, J2EE_admin correct password must be stored in the scured area of config tool.
Your error show that J2EE_admin information is not correct.
So, Please ask your basis team to update new J2EE_ADMIN password or you can do it in scured area of config tool.
Hope this will helps you.
Thanks
Arun Jaiswal

How to update Ipad 2 from IOS 4.3.5 to IOS 5. Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

how to update Ipad 2 from IOS 4.3.5 to IOS 5? Itunes won't let me do it because it keeps showing error messages asking me to check if my network is active.

If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.1.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 7.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

Show error message when Install SM7 in step 4 execute Service

Hi All
Show error message when Install SM7 in step 4 execute Service.
Anyone can help me fix the problem pls!
Regards
Kevin
Start the setup task 'Determination of SID and InstanceNumber for Diagnostics agent' ...
Information for SAPInst:
sid=SMD
number=98
2009.06.08 11:16:59
Task completed with status 0
INFO 2009-06-08 11:17:00.0
Execute step initSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.250
FSL-02077 File system export (share) saploc does not exist.
INFO 2009-06-08 11:17:00.484
Execute step initED of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:00.718
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:05.265
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO 2009-06-08 11:17:05.609
Execute step createOSUser of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO[E] 2009-06-08 11:17:05.875
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2009-06-08 11:17:08.187
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:10.531
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:12.859
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
INFO[E] 2009-06-08 11:17:15.156
FSL-01027 Account user="hk-is-000818\smdadm" does not exist.
WARNING[E] 2009-06-08 11:17:20.281
FSL-01002 Unable to create account hk-is-000818\smdadm. HRESULT=0x80005009
INFO 2009-06-08 11:17:20.562
Execute step initOS400Parameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:20.781
Execute step initING_DI of component |NW_Onehost|ind|ind|ind|ind|0|0|SA_Integrated|ind|ind|ind|ind|7|0
INFO 2009-06-08 11:17:22.312
Creating file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\summary.html.
INFO 2009-06-08 11:17:28.828
Execute step ntpatch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|NW_Update_DLLs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:29.093
Node C:\WINDOWS\system32 already exists.
INFO 2009-06-08 11:17:31.0
Execute step runChecksStep of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|PrerequisiteCheckerDialogs|ind|ind|ind|ind|3|0
INFO 2009-06-08 11:17:32.390
Execute step createAccounts of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0
INFO 2009-06-08 11:17:33.171
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.203
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.250
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.281
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.328
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.375
Nothing to do. User privileges are an empty string.
INFO 2009-06-08 11:17:33.421
Nothing to do. User privileges are an empty string.
INFO[E] 2009-06-08 11:17:35.703
FSL-01027 Account user="hk-is-000818\SAPServicePAS" does not exist.
WARNING[E] 2009-06-08 11:17:40.796
FSL-01002 Unable to create account hk-is-000818\SAPServicePAS. HRESULT=0x80005009
WARNING[E] 2009-06-08 11:17:40.796
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-06-08 11:17:40.843
FCO-00011 The step createAccounts with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_Users_Create_Do|ind|ind|ind|ind|5|0|createAccounts was executed with status ERROR .

hi Subhash
tkx it work
but I got another error when install afterwards. do u know how can fix , many tkx
Kevin
WARNING 2009-06-09 20:39:02.421
Execution of the command "D:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER" finished with return code 1. Output:
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
WARNING[E] 2009-06-09 20:39:02.437
CJS-00095 Error return code. DIAGNOSIS: Return code 1 of executable D:\oracle\product\10.2.0\db_1/bin/lsnrctl indicates an error. SOLUTION: See log file lsnrctl.log for details.
ERROR 2009-06-09 20:39:02.468
FCO-00011 The step StartListener with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|ind|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|NW_OraNetworkSrv|ind|ind|ind|ind|1|0|StartListener was executed with status ERROR .

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

When trying to install nwds tool , showing error message not properly insta

hi ,
when i am trying to install nwds in system, it showing error message at the end stage.
The following program files could not be registered:
*     c:\windows\sapwksta\setup\splash.dll*
*     c:\program files\common files\sap shared\wdadobecontrol.dll*
*     c:\windows\system32\librfc32.dll*
*     c:\program files\common files\sap shared\sapchart.ocx*
The installed applications may not function correctly until all program files are successfully installed.
what is the problem. when i am click on nwds icon on desktop, it showing error message
c:\program files\sap\ide\ide7.0\eclipse\sapide.exe is not valid wid 32 applicaiton.
i installed java and gave environment variables settings . it is not a problem.
please give reply

Hi Sujana,
I am also faced the same issue when I install the NWDS softward.
Reason: Maybe you have install higher version NWDS.Beside that SAPGUI will also use librfc32.dll.
Solution: Please delete librfc32.dll in c:\windows\system32 and install again
I have did the same thing, itsh installed successfully.
Hope it shold works fine.
Regards,
Venkata Ramireddy

Why won't Safari open after an error message?

After an error message Safari shut down and won't reopen. All other applications (mail, iphoto, address book, etc) work normally but Safari gets about halfway through the home url and then quits.

1. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the box next to " Remove saved names and passwords".
    Click "Reset".
2. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Turn off Extensions, if any.
    Safari > Preferences > Extensions

How to show error message in a report program

Hello Guys,
I am making a report using smartforms. I am successful in showing data but problem is if if i put a value in parameters that does not exist is database, the smartform runs and related fields shows as empty fields. But the form is running. I want to show error message if the parameter values dose not matches with the database values. The message will show as Document not exists
So i used related error msg here like
if sy-subrc ne 0.
          message e357.
           endif.
But it is not working for passing values to smartform. It works if i use in classical report. Plz help me on this issue.
Thanks,
Rosaline.

>
Rosaline. wrote:
> Thanks all for reply. Should i have to use message before call function 'SSF_FUNCTION_MODULE_NAME' ? I tried it but not working.
>
>
if it_final[] is not initial.
>*             if sy-subrc ne 0. ---> "Remove this condition check, it not required
>            Message e000(8i) with 'Parameter value not found'.
>            endif.
> *            endif. ---> "remove this
>
Hi,
Sy-subrc doesnt need to be validated here, remove that If condition and check again.
Regards,
Karthik D

TS3638 i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.

i have an internet connection but when i open app store it shows error message "cannot connect to app store".when i try to sign in with my valid apple ID and password it says "connection failed".i tried keychain access settings but it did not help.please help me!!

Open Sysem Preferences from your Apple () menu top left in your screen then select the Firewall tab.
Make sure the Firewall is turned off.

HT5622 My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

SO items are refreshed after showing error message in VA01

Similar Messages

Maybe you are looking for