So many errors for one 30-day-ish trial. Lovely.

I'm constantly having quite a bunch of problems and errors all in an attempt to use a 30 day trial of Photoshop. This is all happening with the most recent version of the software, freshly downloaded from the Adobe website. I'll explain what I've been doing step by step:
+After uninstalling every Adobe product for the 10th time (Photoshop and Creative Cloud), I run the CC Cleaner Tool. When it finishes, the Log File reads as following:
[IMG]http://i60.tinypic.com/154k6sl.jpg[/IMG]
+I install Adobe Creative Cloud. At the end of the installation, my desktop crashes, all of my icons are gone, the taskbar disappears, and the recently installed and now running Creative Cloud software fails to completely load to allow me to login with my Adobe account. I'm forced to restart my computer.
+After restarting, Creative Cloud runs automatically, this time allowing me to login using my Adobe ID. After logging in, I select the "Apps" banner, which for some reason takes several minutes to load. And no, this is not a connection problem, anything else done involving Internet usage runs normally and without any connection issues. After the apps finally load, I proceed to normally install the Photoshop trial. The installation runs smoothly with no issues.
+With the Photoshop trial now installed via Creative Cloud, I attempt to start up the application. Although the Cleaner Tool was supposed to have fixed this problem, an error window once again pops-up regarding the absence of an Application Manager, image bellow:
[IMG]http://i60.tinypic.com/o6fvdj.jpg[/IMG]
+I go to the website the error message directs me to. To my surprise, I'm taken to an error page within the Adobe website, and instead of being given a solution, the Adobe website provides me with other suggestions, none of which match what I'm looking for. This is the website:
Adobe - Error page
+I decide to search for the Adobe Application Manager (thank you Google), and eventually find it. I download the software from the Adobe website, and start it up. Instead of "installing" the application, it "upgrades" a non-existing software on my computer. Or supposedly it does, since when the "upgrading" process finishes, its window closes without warning or confirmation of conclusion, and everything remains unchanged, leaving me wondering what exactly did this "update" do. I'm still unable to run Photoshop, the "Application Manager" error message keeps appearing whenever I try to run Photoshop. At this point I don't really have a clue of what I'm supposed to do any more.
Like all of this wasn't enough, my Photoshop 30 day trial is actually counting down how many days it has been since I first attempted to install the software, as if I was actually working with the thing, which I'm not because Photoshop fails to run, and the Adobe website fails to provide me with a solution to this problem. I'd really appreciated if I someone could assist me with this issue. I'd also recommend Adobe to change error messages so they stop indicating non-existing websites/solutions. Thank you very much for your attention.
Sincerely,
Bruno

Well, my Photoshop trial is counting down, and I'm still unable to use it. I've also just discovered that I have the same problem with other Adobe products such as Premier Pro. I'm still waiting for someone to also clarify me what info exactly do people around here need to be able to help me out, because I'm completely clueless as to what "system info" or "real technical details" are. Thank you.

Similar Messages

  • Error: ORA-16778: redo transport error for one or more databases

    Hi all
    I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
    Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
    but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
    Please help me how can i resolve this issue .Thanks in advance.
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect sys
    Password:
    Connected.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database
    show database
    ^
    Syntax error before or at "end-of-line"
    DGMGRL> remove configuration
    Warning: ORA-16620: one or more databases could not be contacted for a delete operation
    Removed configuration
    DGMGRL> exit
    [oracle@PRIM ~]$ connect sys/sys@prim as sysdba
    bash: connect: command not found
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    Start Date 08-OCT-2006 19:52:48
    Uptime 0 days 0 hr. 0 min. 0 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Service "PRIM_DGMGRLL" has 1 instance(s).
    Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl stop
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    The command completed successfully
    [oracle@PRIM ~]$ lsnrctl start
    LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
    TNSLSNR for Linux: Version 10.2.0.1.0 - Production
    System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
    Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    [oracle@PRIM ~]$ dgmgrl
    DGMGRL for Linux: Version 10.2.0.1.0 - Production
    Copyright (c) 2000, 2005, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    DGMGRL> connect /
    Connected.
    DGMGRL> create configuration test as
    primary database is PRIM
    connect identifier is PRIM
    ;Configuration "test" created with primary database "prim"
    DGMGRL> add database STAN as
    connect identifier is STAN
    maintained as physical;Database "stan" added
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: NO
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    DISABLED
    DGMGRL> enable configuration
    Enabled.
    DGMGRL> show configuration
    Configuration
    Name: test
    Enabled: YES
    Protection Mode: MaxPerformance
    Fast-Start Failover: DISABLED
    Databases:
    prim - Primary database
    stan - Physical standby database
    Current status for "test":
    Warning: ORA-16607: one or more databases have failed
    DGMGRL> show database verbose prim
    Database
    Name: prim
    Role: PRIMARY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    PRIM
    Properties:
    InitialConnectIdentifier = 'prim'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'PRIM'
    SidName = 'PRIM'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "prim":
    Error: ORA-16778: redo transport error for one or more databases
    DGMGRL> show database verbose stan
    Database
    Name: stan
    Role: PHYSICAL STANDBY
    Enabled: YES
    Intended State: ONLINE
    Instance(s):
    STAN
    Properties:
    InitialConnectIdentifier = 'stan'
    LogXptMode = 'ASYNC'
    Dependency = ''
    DelayMins = '0'
    Binding = 'OPTIONAL'
    MaxFailure = '0'
    MaxConnections = '1'
    ReopenSecs = '300'
    NetTimeout = '180'
    LogShipping = 'ON'
    PreferredApplyInstance = ''
    ApplyInstanceTimeout = '0'
    ApplyParallel = 'AUTO'
    StandbyFileManagement = 'AUTO'
    ArchiveLagTarget = '0'
    LogArchiveMaxProcesses = '30'
    LogArchiveMinSucceedDest = '1'
    DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
    FastStartFailoverTarget = ''
    StatusReport = '(monitor)'
    InconsistentProperties = '(monitor)'
    InconsistentLogXptProps = '(monitor)'
    SendQEntries = '(monitor)'
    LogXptStatus = '(monitor)'
    RecvQEntries = '(monitor)'
    HostName = 'STAND'
    SidName = 'STAN'
    LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
    StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
    AlternateLocation = ''
    LogArchiveTrace = '0'
    LogArchiveFormat = '%t_%s_%r.arc'
    LatestLog = '(monitor)'
    TopWaitEvents = '(monitor)'
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    DGMGRL>

    This:
    Current status for "stan":
    Error: ORA-12545: Connect failed because target host or object does not exist
    says that your network setup is not correct. You need to resolve that first.
    As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
    It's 3 DGMGRL commands so I am not sure what 'steps' you need?
    Larry

  • Multiple Errors for one record in RFC

    Hi,
    Iam creating RFC.In RFC i have defined output structure in tables.In that structure one field ZMSG and its length is 500.so want to display mutliple errors for one record in ZMSG field output.
    Using concantenation...but How to do that?send me Example code...
    Regards,
    Raj.

    clear v_error.
    loop on return where type = 'E'.
    concatenate v_error  return-ZMSG into v_error saperated by spaces respecting blanks.
    endloop.
    Edited by: Pranu Pranu on May 21, 2010 9:31 AM

  • Error: ORA-16778: redo transport error for one or more databases.   please help.

    Hello everyone :
    I can't switchover to primary. following is error and information.
    RHEL 6.3 x86-64
    Oracle database 11.2.0.3.0 Enterprise edition
    Primary database = orclprmy
    Standby database = orclstby1
    ##### /etc/hosts on orclstby1
    [root@orclstby1 admin]# cat /etc/hosts
    127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
    ::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
    192.168.50.211    ttprmy
    192.168.50.212    orclstby1
    ### DG broker error
    DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
    Copyright (c) 2000, 2009, Oracle. All rights reserved.
    Welcome to DGMGRL, type "help" for information.
    Connected.
    DGMGRL> show configuration;
    Configuration - TTDGConfig1
      Protection Mode: MaxPerformance
      Databases:
        orclstby1 - Primary database
          Error: ORA-16778: redo transport error for one or more databases
        orclprmy  - Physical standby database
    Fast-Start Failover: DISABLED
    Configuration Status:
    ERROR
    DGMGRL>
    ########### listener.ora on orclstby1
    [root@orclstby1 admin]# cat listener.ora
    # listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
      (DESCRIPTION_LIST =
        (DESCRIPTION =
          (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
          (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME=orcl)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
        (SID_DESC =
          (GLOBAL_DBNAME=orclstby1_DGMGRL)
          (SID_NAME = orclstby1)
          (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    ADR_BASE_LISTENER = /u2/oracle
    ############## tnsnames.ora on orclstby1
    ORCL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
    orclprmy =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
    orclprmy_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
    orclstby1 =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
    orclstby1_DGMGRL =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
        (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
    ##### alert log on orclstby1.
    Fatal NI connect error 12504, connecting to:
    (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
      VERSION INFORMATION:
            TNS for Linux: Version 11.2.0.3.0 - Production
            TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
      Time: 06-SEP-2013 13:19:55
      Tracing not turned on.
      Tns error struct:
        ns main err code: 12564
    TNS-12564: TNS:connection refused
        ns secondary err code: 0
        nt main err code: 0
        nt secondary err code: 0
        nt OS err code: 0
    There is problem  in alert log.
    In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
    Is any idea?
    Thanks for help.
    消息编辑者为：user4914135

    #### on primary database
    SQL>  select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
    LOG_ARCHIVE_DEST_2   VALID     REMOTE  LGWR       PENDING  ALL_LOGFILES    PRIMARY_ROLE orclstby1
    LOG_ARCHIVE_DEST_3   INACTIVE  LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
    #### on standby database
    SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
    DEST_NAME            STATUS    TARGET  ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
    ERROR
    LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
    LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING  ONLINE_LOGFILE  PRIMARY_ROLE orclprmy
    ORA-12504: TNS:listener was not given the SERVICE_NAME in
    CONNECT_DATA
    LOG_ARCHIVE_DEST_3   INACTIVE  PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE 
    ####  log_archive_dest on primary database  
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclprmy
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                     NOAFFIRM delay=0 optional comp
                                                     ression=disable max_failure=0
                                                     max_connections=1 reopen=300 d
                                                     b_unique_name="orclstby1" net_ti
                                                     meout=30, valid_for=(all_logfi
                                                     les,primary_role)
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    ####  log_archive_dest on standby database
    SQL> show parameter log_archive_dest
    NAME                                 TYPE        VALUE
    log_archive_dest                     string
    log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                     d_for=(ALL_LOGFILES,ALL_ROLES)
                                                      db_unique_name=orclstby1
    log_archive_dest_10                  string
    log_archive_dest_11                  string
    log_archive_dest_12                  string
    log_archive_dest_13                  string
    log_archive_dest_14                  string
    log_archive_dest_15                  string
    log_archive_dest_16                  string
    log_archive_dest_17                  string
    log_archive_dest_18                  string
    log_archive_dest_19                  string
    log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                     =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                      db_unique_name=orclprmy
    log_archive_dest_20                  string
    log_archive_dest_21                  string
    log_archive_dest_22                  string
    log_archive_dest_23                  string
    log_archive_dest_24                  string
    log_archive_dest_25                  string
    #### spfile on standby database
    </u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
    orcl.__db_cache_size=1040187392
    orclstby1.__db_cache_size=1090519040
    orcl.__java_pool_size=16777216
    orclstby1.__java_pool_size=16777216
    orcl.__large_pool_size=16777216
    orclstby1.__large_pool_size=16777216
    orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
    orcl.__pga_aggregate_target=536870912
    orclstby1.__pga_aggregate_target=536870912
    orcl.__sga_target=1610612736
    orclstby1.__sga_target=161061273
    orcl.__shared_io_pool_size=0
    orclstby1.__shared_io_pool_size=0
    orcl.__shared_pool_size=503316480
    orclstby1.__shared_pool_size=469762048
    orcl.__streams_pool_size=16777216
    orclstby1.__streams_pool_size=0
    *.archive_lag_target=0
    *.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
    *.audit_trail='db'
    *.compatible='11.2.0.0.0'
    *.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
    *.db_block_size=8192
    *.db_domain=''
    *.db_file_nam
    e_convert='orcl','orclstby1'
    *.db_name='orcl'
    *.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
    *.db_recovery_file_dest_size=5218762752
    *.db_unique_name='orclstby1'
    *.deferred_segment_creation=FALSE
    *.dg_broker_start=TRUE
    *.diagnostic_dest='/u2/oracle'
    *.fal_client='orclstby1'
    *.fal_server='orclprmy'
    *.log_archive_config='dg_config=(orclprmy,orclstby1)'
    *.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
    *.log_archive_dest_2='ser
    vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
    *.log_archive_dest_state_2='ENABLE'
    orcl.log_archive_format='orcl_%t_%s_%r.arc'
    *.log_archive_format='orclstby1_%t_%s_%r.arc'
    orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
    *.log_archive_max_processes=4
    *.log_archive_min_succeed_dest=1
    orcl.log_archive_trace=0
    orclstby1.log_archive_trace=0
    *.log_file_name_convert='orcl','orclstby1'
    *.open_cursors=300
    *.pga_aggregate_target=536870912
    *.processes=
    1500
    *.remote_login_passwordfile='EXCLUSIVE'
    *.sessions=1655
    *.sga_target=1610612736
    *.standby_file_management='AUTO'
    *.undo_tablespace='UNDOTBS1'
    </u2/oracle/product/11.2.0/dbhome_1/dbs>
    Thank you for your help.

  • I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I ppear to have been automatically enrolled for a 30 day free trial of Lightroom mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial I w

    I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I appear to have been automatically enrolled for a 30 day free trial of Lightroom Mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial, if I do not sign up and pay, I will only be able to view my pictures on the desktop but not edit them - surely this cannot be true. How do I un-enroll for the 30 day free trial of Lightroom Mobile and CC?

    When I was signed into Adobe (which was a requirement for installing the upgrade), Lightroom 6 told my at the top right corner that I had 30 days left of my free trial of Lightroom Mobile and Creative Cloud. In parallel with this forum posting, I am chatting with Adobe support. he is away to find out how to prevent any synching with Creative Cloud during the 30 day free trial. I do not think that Creative Cloud is an application that gets installed on your PC. I think Lightroom 6 has it built in, and can use it if if you are signed up to the Creative Cloud and Lightroom Mobile (which I am for 30 days)

  • Signed up for a 30 day worldwide trial - got charg...

    Hello, I signed up for a 30 day worldwide trial and have encountered an issue. The first call was free, yet I was charged for the second call that I have made since. A bit confused and would appreciate any clarity. Thanks.
    Solved!
    Go to Solution.

    NotTellin wrote:
    It should be clearly marked that mobiles are not included.
    Hello
    Calls to cellphones in some countries are included in the Unlimited World Subscription. When the offer is sent it includes this:
    With your Unlimited World Subscription you can:
    Call LANDLINES AND CELLPHONES in: Canada, China, Guam, Hong Kong, Puerto Rico, Singapore, Thailand, United States.
    Call LANDLINES ONLY in: Andorra, Argentina, Australia, Austria, Belgium, Brazil, Brunei, Bulgaria, Chile, Colombia, Costa Rica, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Guadeloupe, Hungary, Iceland, Indonesia (Jakarta), Ireland, Republic of Ireland, Israel, Italy, Japan, Korea, Latvia, Lithuania, Luxembourg, Malaysia, Malta, Mexico, Morocco, Netherlands, New Zealand, Norway, Panama, Paraguay, Peru, Poland, Portugal, Romania, Russia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Taiwan, Turkey, United Kingdom, Venezuela.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • "No connectivity with the server" error for one document but not the other, in the same document library

    We have a number of users all of a sudden getting "No connectivity with the server.  The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
    just by clicking the link and selecting the "Read Only" option.  If they select the "Check Out and Edit" option, they can open the document no problem.  One of my customers gets the error on one document but not the other, in
    the same document library!  The older document (a weekly report) was copied and renamed as per standard procedure.  She can read the older document, but not the new one.
    It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error.  We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
    created profile does not experience the error for these people.  Renaming the profile back restores all their personal settings but the error reappears.  When we copied the old profile's folder structure into the new profile, many of the user settings
    were restored (but not all, like Dreamweaver settings) but the error did not appear.  We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy.  We are rebooting between
    logons to make sure all files are unlocked.
    The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
    2005 SP4.  SharePoint is 64bit MOSS 2007 with the latest CU.
    We've checked the logs on the client as well as on the server and there aren't any helpful entries.  We've also run Process Monitor, also with no helpful entries.  We're planning to run something like Fiddler next.
    It's not everyone, because there are many people are accessing the SharePoint system and the same files.  It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes.  One person experiencing
    the errors is a Site Collection Admin.  That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file.  They were able to open it Read Only no problems that day, but the next day, the same
    file gave them an error.   In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
    We've tried lots of things including:
    Deleting IE cache
    Deleting SharePoint Drafts and webcache folder contents
    Running IE without add-ons
    Upgrading and Downgrading IE
    Uninstalling and re-installing IE
    Reinstalling our SSL certs
    Repairing Office
    Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool 
    Deleting all HKLM and HKLU Office registry settings
    Toggling IE Compatibility Settings
    Toggling the IE Automatic Logon option
    Toggling the location of checked out files
    Adding the site in the trusted sites list
    Adding the site to the WebClient\Parameters registry locations
    Making sure the WebClient service is started
    Rebooting the machine (lol :)
    This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing.  There aren't
    "check out" workarounds for some of those macros.
    We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next.  Thanks!
    -Richard.
    PS  I think this needs to be in the "General" forum instead?

    It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes.  It helped tremendously that my own machine was throwing the error.  I have scheduled a couple of users to work with me to test the
    various fixes, to see which one works best, so the story isn't over yet.
    I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done.  I made a copy of the profile folder and was using that for awhile,
    but then made another copy where I had deleted a lot of content out of it so that the copies would go faster.  Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
    to get back to work.  Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore.  The concept was to keep as much as the users profile
    in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
    When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error.  I then tried xcopy, but got the "can't read file" error.  Then I tried robocopy, and ran into the "junction" problem. 
    I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
    So the process went as follows: 
    Reboot and log into the machine as another user
    Delete the profile and associated registry key
    Reboot and log into the machine as the affected user, creating a new profile, and there is no error
    Reboot and log in as the other user
    xcopy the contents of the skinned-down backed-up profile to the newly created profile
    Reboot and log in as the affected user, and the error occurs
    Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
    I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring.  That was strange, because we've cleaned out the cache folders
    before which didn't fix the issue. 
    So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
    What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
    One way to do this was to:
    Reboot and log in as another user
    Rename the c:\users profile folder
    Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
    Reboot and log in as the affected user, confirm that there is no error
    Reboot and log in as the other user
    Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
    Delete new profile folder, and rename the backup to be the production folder
    Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
    Reboot and log in as the affected user, confirm that there is no error
    We've tried this on a couple machines and it works.  I had to run Windows Explorer as Administrator to access the other profile's folders.
    We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
    We may attempt to script this, but the self-help instructions are only 5 lines long:
    Reboot and log into the affected computer with another account
    Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
    Run Windows Explorer as Administrator
    Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
    Reboot and log into your normal account, and confirm the error is gone
    I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

  • Unable to load Database Error for one of the BSO Application.

    Hello Everyone,
    We have one Production Issue like suddenly the an Application Fiji while should be running was stopped. When i tried to restart it its showing Error.
    gvw3086-v.atlanta.hp.com:1423.Fiji    Start  application    August 28, 2013 8:32:24 PM SGT    Failed
    Error: 1002141 Unable to load database [Arirang], error code [1019038]
    gvw3086-v.atlanta.hp.com:1423.Fiji.Consol    Start database    August 28, 2013 8:33:30 PM SGT    Failed
    Error: 1002141 Unable to load database [Arirang], error code [1019038].
    I checked the Log but not sure it correct or not i see this Error message.
    [Wed Aug 28 11:33:48 2013]Local/Fiji///7944/Info(1002089)
    RECEIVED ABNORMAL SHUTDOWN COMMAND - APPLICATION TERMINATING
    But i also saw this error before but the application use to start automatically but this time it did not.
    can anyone help me on this.
    Regards,
    Naveen

    Hi,
    As i mentioned above its only for one Application Fiji. For a temporary Solution we tried to restart the Hyperion Services. But this did not work. One of the the Hyperion Service HyPService(not sure of the exact name). did not restart. So we have done a a fail over to other node and now the Fiji apps is running. But i don't think so what we have done is the correct fix for the solution. Have any one faced this problem.
    Hi John,
    Which Doc ID you mean to refer me is that the doc which comes with the Essbase Software.
    Regards,
    Naveen

  • Retropay by element run Errors for one employee

    When i am running retropay for 3711 employees one of them errors out and the retropay by element process ends as Incomplete.
    The following is the error for the assignment:
    Error ORA-01427: single-row subquery returns more than one row has occurred in table pay_element_entries_f at location 4502
    Cause: an oracle error has occurred. The failure was reported on table pay_element_entries_f at location
    The log file for that it appears as follows:
    Payroll: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    RETROELE module: RetroPay By Element
    Current system time is 15-APR-2010 16:26:51
    ===============================================================================
    Oracle Human Resources Generic Process
    Started at : 15-APR-2010 16:26:51
    Chunk Size : 20
    Threads : 1
    Logging Category :
    User Messaging : N
    Interlock : N
    Trace : N
    RR Buffer Size : 500
    RRV Buffer Size : 500
    Bal Buffer Size : 500
    EE Buffer Size : 500
    Logging Area :
    Assignment ID for Start:
    Assignment ID for End o:
    HR_6881_HRPROC_ORA_ERR
    SQLERRMC ORA-01427: single-row subquery returns more than one row
    SQL_NO 4502
    TABLE_NAME pay_element_entries_f
    APP-PAY-06881: Error ORA-01427: single-row subquery returns more than one row
    has occurred in table pay_element_entries_f at location 4502
    Cause: an oracle error has occurred. The failure was reported on table pay_element_entries_f at location 4502 with the error text ORA-01427: single-row subquery returns more than one row
    Action: Please contact your support representative.
    Ended processing at : 15-APR-2010 21:50:07
    Total Assignment count : 3711
    Total Action count : 3711
    Successfully processed : 3710
    Skipped : 0
    Unprocessed : 0
    Errored : 1
    ===============================================================================
    PL/SQL Output
    PL/SQL Output
    Executing request completion options...
    ------------- 1) PRINT   -------------
    Printing output file.
    Request ID : 595012      
    Number of copies : 1      
    Printer : noprint
    APP-FND-00092: Routine PRINT_OUTPUT cannot find the file /data/oracle/PRD/inst/apps/PRD_hrmsprod/logs/appl/conc/out/o595012.out to print.
    Check if the file exists. Check if the person who started the concurrent manager has read privileges on the directory and on the file. Contact your system administrator to assign read privileges.
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 15-APR-2010 21:50:08
    Please can some one help me to troubleshoot so that i can rectify this error for 1 employee?
    Edited by: 594647 on Apr 16, 2010 10:46 AM

    you can delete the retro assignment action for the moment, so you can launch the run for all employees.
    As such, you have some more time to debug the issue.
    I would activate some payroll tracing, so you know which fast formula throws this error. And then you should dig further, so you can identify the sql retruning multiple rows.
    Or you do a sql*trace. That one will also point you to the offensive sql.

  • Office web app error for one note only

    There is strange error in my SharePoint 2013 farm with OWA. Everything works fine except for one note.
    If you click in the notebook on the left hand side of the site, for first time everything works fine. When you try to click the same link second time, either server error comes up in chrome and nothing in IE. If i deactivate the web feature one note and
    reactivate it, it works again for first time and nothing comes up for the second time. Error i see is 
    WOPIFrame -Unhandled exception: System.TimeoutException: The open operation did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout. ---> System.TimeoutException: The read
    from the pipe did not complete within the allotted timeout of 00:01:00. The time allotted to this operation may have been a portion of a longer timeout.    
    Has anyone seen this behavior? 
    sachin

    Hi,
    According to your description, I think this issue is more related to SharePoint, I suggest that you could post it to
    SharePoint forum.
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I signed up for a 30 day free trial; however, I am being asked for $19.99 at the first attempt of use. Why?

    Why am I being asked to pay $19.99, the first time I am trying to use my 30 day free trial?

    Calpre what Adobe software or service is your inquiry in relation too?

  • Table has too many columns for one pg in InDesign document. How do I force a break?

    I have imported an Excel table into my InDesign document.  The table is 598 columns wide.  Obviously this isn't fitting on one page.  I want it to just keep flowing from page to page, keeping one same column at the beginning of each page (like "freeze panes" does in Excel) but it's not doing that.  Is this possible in my InDesign document or will I have to manually copy and paste 10 columns at a time, which is about how many are fitting on one page?  Any searches I do on this subject just talk about flowing rows but nothing about columns. 

    As far as I know there's probably no way ID is going to do what you want.
    You can place a table across a multiple page spread, but the odds of being able to do that and still keep the file printable are marginal, at best. You can't for example, leave blank space at the gutters unless you are able to add a blank column that spans the gutter, and the limt for multipage spreads is 10 pages wide, whcih doesn't sound like it's probably enough to hold almost 600 columns.
    Perhaps placing the table using named ranges of appropriate widths would work...

  • Lion and Rosetta/The Mouse/Installing In As Many Mac For One Price

    According to the NY Times, Lion eats Rosetta to shreds.  Is there a way to know which programs use Rosetta? Like say, Photoshop or Word? How do you utilize the mouse? Say as always? Back to the article, it states: "your $30 covers as many Macs as you own.  How do you install the app into the other Macs, if they are in three different locations, and don't speak to one another. Do you put the app on a flash?
    Thanks for any responses

    For info on Rosetta >  Lion upgrade questions and answers:  Apple Support Communities
    You can install Lion on all your authorized Macs using the same Apple ID.
    Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM.
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Click your Apple menu / About This Mac then click More Info. Select Applications to see which apps are Intel or PowerPC.

  • Pause Backup of itunes library, too many DVDs for one sitting?

    The backup of my itunes library will take 8 DVDs. Is there a way to pause it, so that I don't have to do it in one sitting? Or choose to do a partial backup now, and then continue later? What would happen if I only had time to do 2 DVDs today, could I come back later and continue, or would I have to start all over again?
    Thank you for your help.

    Thank you very much for your reply. I am using "Backup" in applications. I am not sure if this is a feature of my .mac account or if it came with my computer.
    Is using iTunes to backup better? I have not seen a feature in Backup to choose to backup portions of my library, but you are saying that backing up in iTunes, has this feature?
    Thanks again.

  • Create a rule for one specific day

    Greetings,
    I am not sure this is the right forum for me to ask for help; if not, please kindly redirect me to the right one.  Thanks
    I am using MS Office 2013 outlook on Windows 7.  Love it.  However, I would like to create one out-of-office reponse indicating that I will not in the office on Fridays.   
    Is there a way to do so?   
    If you know a way, please guide me through.
    Thank you much,
    JPL

    Hi,
    Which type of email account are you using? POP3, IMAP or Exchange?
    If you are using an Exchange account, you can go to File > Info > Automatic Replies to set your Out of Office settings. For more information, please refer:
    http://support.microsoft.com/kb/290846/en-us
    If you are using a non-Exchange account, you can set rules to simulate the functionality. See:
    http://office.microsoft.com/en-us/outlook-help/automatically-reply-to-email-messages-without-using-an-exchange-server-account-HA102749461.aspx 
    Hope this helps.
    Regards,
    Steve Fan
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

Maybe you are looking for

  • To find out BADI implementation for a standard transaction

    Like for User Exit is there any standard code to find the BADI implemetation for a Transaction Code. If so please paste the code.

  • Alternative to INNER JOIN

    I've a table like this: CREATE TABLE ADRESY IDPOWIATU NUMBER(10) NOT NULL, IDOBIEKTU NUMBER(10) NOT NULL, IDADRESU NUMBER(10) NOT NULL, TYPADRESU NUMBER(10) NOT NULL, NAZWAWLASNA VARCHAR2(255 BYTE), IDKRAJU NUMBER(10), IDWOJEWS NUMBER(10), IDPOWIATUS

  • Computer in constant restart mode, restore disk & wireless keyboard problem

    I am have been trying to restore my system to factory settings with my installation CD however I am encountering a huge difficulty. I ran the disk and the computer restarted, however when it booted up I was prompted to restart again. I have restarted

  • Please please help - i can't open swf files

    I have downloaded Adobe Flash Player and Adobe Shockwave Player to play some swf files I have downloaded.  These files still say that Windows can't open them though and I don't know why.  I've tried uninstalling reinstalling etc but the computer does

  • Re download a song

    I purchased a song, which is missing from my back up.  How do I get this song back?  I went to re-down load it and i-tunes says "purchased"with no other option that includes me getting this song back on my computer.  What do I do?