So ML's new airplay functionality won't work on a Macbook Pro 2010?

Was there anything in the advertisements for the new Airplay functionality via ML that it wouldn't apply to any machines prior to 2011?
Am I just missing something about how to enable it, or is my MacBook Pro 2010 really unable to make use of the mirroring functionality?
I have this sinking feeling that I've been hosed

to say the least, DIS-appointing.
Apple's done a better job in the past of identifying which machines would work with software upgrades. I suppose I missed the fine print, but since this kind of functionality would be highly coveted, it would've served Apple to make more prominent in their descriptions this issue.

Similar Messages

My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

My airplay mirroring won't work with my macbook air, eventhoug my internet connection is very fast. The image will appear after 5 seconds.

Mirroring is done over the local network so internet speed isn't relevant.
I would check istumbler.net to see if there is any interference

CanoScan 9000F scanner won't work on my MacBook Pro even though it should be compatible with the Mac 10.7.2 OS.

My new CanoScan 900F scanner won't work on my MacBook Pro even though I've followed all instructions to make it compatible with the 10.7.2 OS. The USB connection isn't recognised. What else con I do?

I have a similar problem with a new CanoScan 9000F which I tried to use without any success on my desktop computer (Mac Pro 5,1) and laptop (Macbook Pro 1,2) both running OS 10.6. Problem is identical on both, viz:
• Scanning process appears to start, a message comes on the screen: Scanning do not open document cover followed by Scanning...
• This is then replaced by the message: Cannot communicate with scanner. Cable may be disconnected or scanner may be turned off. Check status. Scanner driver will be closed. 2.155.33
I've spent several hours on the phone with Canon support but having uninstalled/installed/reinstalled/updated/turned on/turned off/unplugged/plugged/restarted innumerable times, the problem is exactly the same. The scanner icon shows up in the Printer & Fax System Prefs (though without the little status lights) and shows as being connected in the USB tree. I think it's a problem with the scanner, Canon bods are suggesting the Macs are at fault and suggest I try connecting to a wintel (hawk, spit) and it's 100km to the nearest Canon service centre.
Any suggestions as to what might be the problem/s and what I might be able to do to fix it/them?
Thanks.
By the way, bought the Canon to replace a HP Scanjet 8300 which I've used for 6 years almost without problems. Any that I have had have been fixed merely by turning the scanner off then on after a 10 second rest.

FaceTime won't work on my MacBook pro unless I tether it through my iPhone - FaceTime works great on my phone through the home wifi network but never connects on the MacBook anyone got any ideas

FaceTime won't work on my MacBook pro unless I tether it through my iPhone - FaceTime works great on my phone through the home wifi network but never connects on the MacBook anyone got any ideas

Hey mwe1978,
I understand that you are having issues with FaceTime on your MacBook. In my experience, the following article may provide best troubleshooting practices, and lead to a resolution:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
With FaceTime for Mac you can place and receive video calls to users of FaceTime on supported devices. Learn the system requirements for FaceTime for Mac and basic troubleshooting steps to resolve FaceTime for Mac activation and usage issues.
Thanks,
Matt M.

My Sims 3 game won't work on my macbook pro.

This message comes up when i try open it : "Cant open application Sims 3 in launcher." And then this: "-10810" Please try explaining this to me in an easy language, because i really wonder why **** won't work.This message comes up when i try open it : "Cant open application Sims 3 in launcher." And then this: "-10810" Please try explaining this to me in an easy language, because i really wonder why this won't work. I have tried reinstall it but it does not change anything, I have recently updated the game but i haven't had problems about this before. Why is this happening?

Morning Alison Mcshane,
Thanks for using Apple Support Communities.
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
For more information on this, take a look at this article:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Best of luck,
Mario

Power button and voice control buttons won't work on my macbook pro retina

I found that my power and voice control buttons won't work on my new Macbook pro retina. I can't shut it down or restart it in any way. And Im afraid if I force to shut it down I can't turn on it cuz the power button won't work. What should I do? Any idea???

Please read this whole message before doing anything.
Back up all data.
Quit Facetime and Messages if either is running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following item from the Library folder to the Trash (either may not exist):
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try the applications again. If they work now, stop here. Close the Library folder.
Step 2
If you still have problems, quit again. In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.imdsmsrecordstore
com.apple.imservice
Move them all to the Trash. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash too.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again.

External back up won't work on Yosemite Macbook Pro

I downloaded OS X Yosemite a couple of days ago, works well. I went to back up my Macbook Pro on the external hard drive I have always used and it won't work, it just keeps saying preparing back up. It is a WD My Passport hard drive. I tried removing the hard drive and selecting it to use a a back up but still wouldn't work. It has worked fine every time before downloading Yosemite. Any suggestions would be greatly appreciated.

I know that no one has replied yet, but figured out the issue. I called Applecare and they couldn't figure it out, so sent me to a genuis at the Apple store. They too couldn't figure it out and told me that it was a firmware issue with the Toshiba dvd external drive. When I got home, I thought I would try one more thing. I hooked it up to a powered hub and it works perfectly. I'm not sure why no one else thought of it, but glad that I did.

HT204406 iTunes Match saying I'm limited to 5 devices...but I don't have 5 devices and won't work on my MacBook Pro. Please Help!

I've just got a new MacBook Pro, and want to have iTunes Match on it. But when I go to 'add this computer' in iTunes on the MacBook, a message comes up saying I've reached my limit of Match being on 5 devices. This makes no sense because I only have match on my iPad and my old Windows laptop and nothing else.
Out of curiosity, I turned off iTunes Match on my iPad to see what would happen, but I still cannot get Match on my MacBook Pro.
Please help!

Do a backup before proceeding.
Try putting the 10.6.3 disk in the computer. During a restart, hold down the option/alt key, select the disk, and see if you can boot from there. If so, select the language, then go to the Utilities menu, and select Disk Utility. Check to see what partition scheme you have by selecting the hard drive.
If you don't have GUID, you are going to need to erase the drive and reformat, which will cause you to lose all your data. Did I mention doing a backup?
If you do have GUID, run Disk Utility repair disk and repair permissions. You may have to do this more than once. Then try in install 10.6.3.
If successful, use the combo update to get to 10.6.8 and then run Software update until there are no more updates.
10.6.8 Combo Updater

The drivers supplied by bootcamp won't work for my macbook pro running windows 7

I installed windows 7 on new macbook pro using bootcamp. It downloaded drivers but the drivers dont work for ethernet, network adapter, usb and others.
Help needed.

matthewfromgarland wrote:
I found out you need to run the 'setup' application from the flash drive in Windows to install the proper drivers. I was trying to windows to search the drive for the drivers. I don't know why its not being explained that way.
Hope this helps others.
It is explained that way in the Boot Camp manual, did you read it (page 22)?

The Sims 3 won't work on my Macbook Pro

I just recently got a Macbook Pro that came with Lion installed already. When I tried to put Sims 3 into it, the computer didn't read the disk. Is there anything I can do to get Sims to work on my computer? Thanks

Is it a Mac disk? If not, it won't work unless you create a Windows partition, and install Windows through Boot Camp or an emulator like Parallels.

Canoscan LiDE 210 won't work on my macbook pro

Can't get my scanner to work on my macbood pro, OSX 10.8.4. I've downloaded the driver for the scanner and the MP Navigator EX 5.02. MPNav won't even open. LIsts only a few Canon products supported. EXTREMELY frustrating.

I should have clarified I was referenceing the software as Canoscan LiDE 5.0.1.4 for Mac OS X. It appears to be the most current version.
The scanner is a Canon model CanoScan LiDE 600F. After posting, I found and installed the current scanner driver. Same results with a subsequent scan attempts. The preview displays the full picture, but finished horz. image is clipped at the top and shows part of the sprocket holes at the bottom of the frame.
But after teasing the piece of film into the most extream position against the bottom edge of the holder with a toothpick I was able to trial and error some full frame images with minimal clipping. I suspect it is a software problem. Probably some focusing or alignment algorythm
The film adapter is a 13"X4" device that lays on the larger glass, a cable plugs into a port labled FAU and the device engages two magnetic latches to exactly position the film adapter. The adapter itself has a hinged lid and seems to be disigned for a 35 mm strip of film, not an idividual cut frame. The larger scanner lid is double hindged, so it can close over the film adapter when its mounted on scanner bed.

I need a new modem. Which modems work well with MacBook Pro and Airport Express?

I need a new modem. Which modems work well with the MacBook Pro and Airport Express?

You need to inquire from your ISP which modems are compatible with their netwrok. They should give you a list.

Upgraded to 3.6.16 now New Tab function won't work

Firefox did the automatic update to 3.6.16 and now it won't allow me to open a new tab. Page just refreshes if you choose 'File'-New Tab, and clicking on the tab icon doesn't result in anything. Have not noticed anything else that could be affecting how Firefox is working.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

New hard drive won't install in my macbook pro 13"

Hi everyone
I have recently been having problems with my mac book where I was constantly seeing the spinning beachball. I had wiped the hard drive and was still having this problem so took my mac book to a "genius" at my local mac store who told me that the hard drive was faulty. I was out of warranty so he advised me how to change the hard drive and recommended me to install a crucial 240gb M500 SATA 6Gbps 2.5 SSD. I have now fit this into my mac book and have done internet recovery to allow me to get to Disk Utility. My computer recognises the new Hard drive but when I got to erase the disk to enable me to install the operating system it just hangs attempting to unmount the hard drive. I left it over night and nothing happened. IS there something I have done wrong or is there another way of me installing the operating system onto the new hard drive?
Many thanks in advance

Hi Clinton:
off topic: remembering your beautiful 980GB M500, i want to point to two things that I came repeatedly by:
1. the M500 has more "overprovisioning" than most other Crucial ssds ( I thought that you might want to hear that.
2. Lately I hear more and more comments by respectable manufacturers that Trim in Mac OSX should be avoided: the "enabling" softwares are a bit crippled software and there are many timing faults at the file level communications, which are counterproductive.
So I followed the recent comments of a OWC staff member:
"One way to live without TRIM on OSX is just reduce the volume on the drive and leave the unallocated space...unallocated. If you have a 240GB drive I suggest removing 40GB.
The drive will map this into the over provisioning and move the space in and out of use on the volume very quickly...almost faster than TRIM does
Also remember the drives do have garbage collection and will look after themselves if given the chance too".
So I restored the complete original IOAHCIFamily.kext ( by running a Combo Update) on all my SSDs, and with DiskUtility I dragged the bottom of the startup partition up for about 40GB and left it unallocated (no format).
I remember that you did not install Trim (?), but to be sure I send this to you.
Have fun my friend,
Lex

HT1349 My new iPhone 4S won't sync to my MacBook Pro. I installed the latest version of iTunes but it doesn't recognize my phone when I connect with USB. Any ideas on how to resolve this?

It's strange, on my work issued Windows laptop I have no issues syncing my iPhone to iTunes. But on my personal MacBook, iTunes does not pick up my iPhone when I connect via USB. Any advice on this please?

See http://support.apple.com/kb/TS1591.

So ML's new airplay functionality won't work on a Macbook Pro 2010?

Similar Messages

Maybe you are looking for