So, my computer won't start, and it's from August 2007

So, I was on my Macbook earlier, and it froze up. I couldn't force quit anything and then I turned it on and it was a bank gray screen. I can hear the fan and the hard drive and everything, which you've heard before. I got this thing in August 2007, and from the 15 posts I read, it sounds like I have the hard drive failure thing that people have talked about before, and linked to this: http://www.macsimumnews.com/index.php/archive/macosgmacbook_seagate_hard_drives_catastrophicallyfailing
So, my question is: will this be covered by the basic warranty I got when I brought it, or will I need to replace my harddrive out of pocket. If I do need to replace it, how much is this gonna cost me?
Thanks.

This just happened to my MacBook, and it's also from August 2007. I have an appointment to take it in on Wednesday, May 28.

Similar Messages

  • My mac desktop computer won't start and just beebs

    My mac desktop computer won't start it just beens loudly.   I don't have any lights showing on the keyboard but can hear the drive switching on.  I have unplugged the computer, waited and replugged and waited and then turned it on again without and results.  Please help.

    Use this tip to identify your Mac:
    https://discussions.apple.com/docs/DOC-6413
    If indeed it has a PowerPC processor (the PowerMacs use that, and have been around since early 2006 simultaneously with some of the Intels), see this tip on beeps:
    Power On Self-Test Beep Definition - Part 2
    If it is Intel, see this tip:
    Mac computers: About startup tones

  • Computer won't start and light just flashes as if in sleep mode. Does not even make the start chime. displays remain dark.

    Computer won't start. sounds like it makes an attempt at accessing a hard drive. but then just goes to sleep. no start up noise. no displays come on.

    Resetting SMC could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • My Computer won't start, and Disk Repair says to backup files?

    I am not able to start the computer without the install disc, and I know no ways to backup my files from the install disc and restoring isn't really an option right now because I really need to keep the files on my computer. If someone could help it would be much appreciated.

    Try this:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

  • Computer won't start & fails to wake from sleep

    First post -- I have a 2009 HP Pavilion Elite w/Windows7. Good box & OS, never a problem until now. Started about a month ago w/the box not waking up from "sleep" -- no response (power light turned from amber to blue as usual but nothing else happens). Had to turn it off, but then won't come back on! After 10-15 minutes of repeated power-on button presses, it starts back up. Removing/reinserting the power cord during trys doesn't help. Occasionally it starts right up from sleep, but usually has this problem. Windows7 is up-to-date and no viruses or malware detected. HP or Microsoft diagnostics show no issues.
    I opened the box to clean out dust -- also took off the CPU heatsink (really dusty) & cleaned it too. Fans rotate easily & aren't an issue.
    So now I have "sleep mode" turned off, but occasionly the box has to be turned off & afraid it won't come back on. I've seen some of the HP videos & will try shorting the two start-up pegs on the MBoard, but the power-switch was hardly ever used & I seriously doubt that's the problem -- it wouldn't have anything to do w/the sleep-wakeup problem. Any suggestions?

    Hello @beng1,
    I understand that your desktop computer is not able to wake from sleep mode, or power on intermittently. I would be happy to assist you in this matter!
    To enable your system to successfully wake from sleep mode, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues (Windows 7).
    Additionally, I also recommend following the steps below to restore the power settings on your computer:
    Step 1. Click the Start button
    Step 2. In the search box, type "Command Prompt"
    Step 3. Right-click Command Prompt
    Step 4. Click Run as administrator
    Step 5. At the command prompt, type powercfg /restoredefaultschemes and press Enter 
    In regards to the computer not powering on, I suggest following this resource on Computer Does Not Start (Windows 7). This should help enable your computer to consistently power on.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Computer won't start and other problems

    Recently I've noticed my computer getting slower and slower (including during startup). Today it failed to startup. Sometimes when starting up it'll be a blank grey screen and then I'll restart it and it'll go to the Apple logo with the spinning progress circle but stay on that forever. I started it up on the install disc and went to disk utility and it stuck on the "gathering disk information" and never got beyond that. Any idea what I can do?
    iBook G4   Mac OS X (10.3.9)  

    I'm wondering if this could be a hard drive going bad. I don't really know if a failing hard drive could show these symptoms. However, your experience with Disk Utility being stuck on "gathering disk information" makes me wonder.
    One test that you could do would be to use the Startup Manager to try to see if your hard drive shows up. To invoke the Startup Manager, you need to hold down the option key while you restart. After a bit, the system should display the disks (or volumes) from which you will be allowed to startup. The link has more detailed information.
    If your hard drive does not show up as one of the available startup volumes, that could be consistent with a bad hard drive. I am not sure that would be the only explanation, though. If your hard drive shows up, select it and see if you can boot from it.
    EMAC G4 1.0 GHz   Mac OS X (10.4.6)  

  • Firmware update progress bar appears and computer won't start up

    Hi,
    I am on OS X 10.6 (the latest developer build, whose build number I can't remember and can't look up because my computer won't start up) and this morning when I tried to start up my computer, it chimed, the apple appeared but then a grey progress bar (like the one that appears during a firmware update) appeared at the bottom of the screen along with the customary spinner. This progress bar didn't update and after 10-ish seconds, it disappeared and left just the spinner. I left the computer in this state for 4 hours and nothing happened. It still starts up in single user mode (but I can't seem to get Open Firmware mode to load) and it starts Windows XP on another partition of my main HD.
    When I start it in verbose mode, it says that my catalog B-tree has keys out of order and it is unable to repair them. Also, I get an error message from launchctl: "Bug: launchctl.c:2033 (23930):17: auditquickstart() == 0". Then later on it tells me to convert a few system plist files to launchd (all in the /etc/mach_init.d/ folder). The very last line says "launch_msg(): Socket is not connected".
    I would rather not re-install the system, but if I have to, I guess I will. I appreciate any light that anyone can shed on this problem.
    Thanks,
    Kyle

    Yes, they (the third-party utilities) both come on bootable DVD's. As I mentioned, since Snow Leopard was just released in its final version, the developers may be in the process of releasing updates.
    Your situation is likely to be a case where the data corruption issue already existed before installing Snow Leopard, and the installation process made the problem more apparent (because something critical was installed where it was affected by the data issue).
    It is a good idea to run +Repair Disk+ in Disk Utility on the startup volume before installing a major system update. Actually, I do it before any system-level update.
    You should also have a backup (at least of your personal data if not the entire volume), in case something bad happens during a major system upgrade. If you were using Time Machine, the easiest recovery would be to reformat the internal drive and use the Time Machine complete volume restore utility to restore the volume back to the date/time state just before you installed Snow Leopard. Then, after restarting from that restored volume to make sure everything is working, start up from the Snow Leopard installation disc, run Disk Utility and use +Repair Disk+ (just to be sure), and run the upgrade to Snow Leopard again.
    If you have a backup of at least your personal data, you may want to reformat the internal drive, install Snow Leopard and bundled apps, install your third-party apps from their original sources, update everything that needs updating, and restore your personal data.
    If you don't have a backup, the best bet is to try either DiskWarrior or TechTool Pro. DiskWarrior is very specialized into repairing this type of data problem. TechTool Pro has similar capability, but it is a more general tool with other features.

  • Mountain Lion update, and now computer won't start up?

    Writing this for a friend, as his computer is inop at the moment.  Hence this message. 
    He has a new 27" iMac.  He upgraded to Mountain Lion a few weeks ago, and then had intermittent problems with apps unexpectantly shutting down. 
    Now he did a ML update this morning, and his computer won't start up.  It gets to the point of the Apple logo coming up, a progress bar, and then the spinning wheel, but then shuts itself down right afterwards.
    A safe boot yields the exact same result.
    Any thoughts out there on what he could try to get it up and running again?
    Thanks much for any and all help. 

    Thank you for the fast response.
    He was able to get into Disk Utility with the Command and R keys, but when he tried verifying the disk, in red it said 'Invalid Node Structure, volume could not be verified completely'.
    He went ahead and verified it anyway, then proceeded to repair it.  Howver, it stopped repairing, said it cannot repair, and that he should back up files and reformat the disk.
    How can he back up his files?  He cannot see a way to do it.  Is there anything else he can do besides having to reformat the disk? 
    This is his first Mac (after much prompting from me to go Mac), and he's afraid he's now lost everything on there.

  • TS1717 My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer

    My iTunes won't start and receive "The program can't start because MSVCR80.dll is missing from your computer. 

    Check out the user tip below.
    https://discussions.apple.com/docs/DOC-6562

  • HELP! Battery drained and now, even with a power plug, computer won't start

    My battery drained completely...and I went to charge it. When I plug the power cord in, it shows "green" not "red." When I remove the battery and just plug in the power cord, the computer won't start either.
    Anyone encounter this before after a full battery drain? It's very odd.

    I had the same green light non-charging problem. Turns out, I had to replace my wall adaptor. A dealer will have a good power supply you can try.
    Wayne

  • Computer won't start from hard drive or CD, and won't perform system recovery.

    I have an HP Pavilion g7-1314nr. Yesterday it froze and I held down the power button to turn it off. After turning it back on, it started a disk check. I turned it off during the disk check, and upon trying to boot it back up, it told me booting failed and to press CTRL-ALT-DELETE to try again. After multiple attempts, it stopped displaying this message.  Under system diagnostics, I ran a boot test, and it failed. Attempting a system recovery brings up the start-up windows logo, and then a black screen with an enlarged cursor. This morning, I inserted a recovery disk and told it to boot from internal CD/DVD drive. Like system recovery, it brings the Windows logo, and then a black screen with an enlarged cursor. My computer is incapable of booting from either the hard drive or a CD. What do I do?

    Hi @TeridaxXD001 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion g7-1314nr Notebook and issues with Windows 7 and starting up.  I recommend to restore the BIOS defaults. You could restore the BIOS with this document selecting the reloading the BIOS default settings which should resolve the fan issue.
    Here is a link to computer won't start for Windows 7. There is a section on getting past the HP Logo screen.
    If that does not help at the end of the document it shows you to do a hardware test.
    Please note remove any and all USB devices before troubleshooting. Disconnect all non-essential devices
    Hope this helps you out.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Computer won't start if ipod is connected

    My computer won't start when my ipod (nano) is connected. He stucks in the post screen of the motherboard. Before the pc will check what the boot drive is. So, changes in boot devices in bios won't work. What can be the problem?
    AMD   Windows XP Pro  

    mardymar: Windows may be seeing the iPod as a bootable disk....the following link talks about confusion as a network drive and could be cuaisng the same.
    http://docs.info.apple.com/article.html?artnum=93499
    Did you change your BIOS boot order - I think you might try that if the above link fails to help.

  • What does a file folder with a question mark in it mean when the computer won't start?

    What does a file folder with a question mark in it mean when the computer won't start?

    There are four general causes of this issue:
    1. The computer's PRAM no longer contains a valid startup disk setting when there aren't any problems with the disk itself. This can be checked for by pressing the Option key and seeing if the drive appears.
    2. The internal drive's directory structure has become damaged. This requires usage of an alternate bootable system to perform the repair.
    3. Critical system files have been deleted. This requires usage of an alternate bootable system to reinstall them.
    4. The internal drive has died or become unplugged. This is the most likely case if the computer took a sharp impact or there are unusual sounds coming from the hard drive's location.
    (68976)

  • HELP PLEASE!!! Computer won't start up

    Help Please!
    My computer won't start up, when I click the start up button the light comes only once, sounds click (once) and that's it, no power up.
    Because of the age, I knew that the battery could be the reason, so I ordered the exact same battery and replaced it today (following the instructions very carefully). Nothing changed. Then I read about the button for resetting the power management (the one below the ram memory), did that too...and nothing.
    I read the manual, it talks about recently installed components (which I have not) and explains the meaning of the numbers of blinks the power light makes with this type of failure, 2 blinks=ram memory, 3 blinks...4 blinks..more than 5 blinks= take it to service.
    If somebody could please help me, I would really appreciate
    All the best,
    Veronica

    I had similar problems with my G5 2ghz dual PPC. Mine would turn on, sometimes the startup chime would sound, sometimes not. The fans would run and continue to run faster and faster until I shut it off.
    The red light comes on by the way, when the internal plastic shield is not installed or seated correctly.
    Anyway, I determined after fooling with the machine for several hours that the symptoms pointed to the video card so, on a hunch, I grabbed a hair drier, pulled the video card and warmed up the video card with the drier. Then reinstalled the video card, hooked up the monitor and hit the power button. Bingo, the machine booted normally. BUT, it would intermittently hang or act odd while running so, I ordered a replacement video card. Installed it and the problem never returned. Sadly someone stole the machine last month but it was in perfect working order at the time:(

  • Computer won't start up after changing permissions.

    I accidentally changed the permissions for all of the files on my hard drive. Now, Leopard won't start up. And to top it all off I conveniently can not find my Leopard disk. I did, however, locate my Tiger disk but the computer won't start from the CD drive either.
    I also thought that I could install Tiger on an external Hard Drive using my sisters computer but Tiger would not install on the USB Hard Drive because it said Mac OS X could not start from the external hard drive.
    It won't start up in "Safe Mode (holding the SHIFT key)".
    Anybody have any suggestions?

    You can, in addition to Barry's excellent suggestions, reset the SMU.

Maybe you are looking for

  • List of Materials with out POs

    Hi, I want to know the list of materials for which no PO was created so far. Is there any report or T.code to get the material list. Regards. Chinna Edited by: Chinna Veerappa on Apr 28, 2009 11:03 AM

  • Images not displaying correctly?

    Following a MAC M Lion upgrade and Safari Update to latest version? ? ? See ipad image : (Thats not right)

  • Customer services UK

    Does anyone know a number for customer services IN the UK please?  Having communication problems with customer services on the number given. Thank you.

  • ControlllingArray of LED

     I have 48 Arrays each with 24 elements. I want to change the color of LEDs based on each individual value of these arrays(three different color). I created 24*48 arrays(Clusters) of LEDs. my input array("Sorted Array") with the values is sorted , ri

  • Error: Boot image to update:

    Error: Boot image to update: Microsoft Windows PE (x64) Add ConfigMgr binaries Add custom background Enable Windows PE command line support Add drivers Intel(R) ESB2 SATA AHCI Controller Intel(R) ESB2 SATA RAID Controller Intel(R) ESB2 SATA AHCI Cont