So my phone won't turn on and when I plug it in it just flashs the apple logo
Anyone help me out. Oh I also already tried holding the power and home button and nothing.
Hello RyukBelmont
Try putting your iPhone in to recovery-mode and restore it to see if it comes back on. With your iPhone powered off, plug it into your computer and hold the Home Button, you will then see a Connect to iTunes icon and you will have the option to restore. It will erase all the data on your iPhone, but if you have a back up you can restore from it.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Regards,
-Norm G.
Similar Messages
-
trying to sync, but when i disconnect from wall charger it sort of dies until i plug it into the usb cord, the the apple logo rolls on and off
nevermind i just realized that its because the battery is flat dead.
-
Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!
The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck. -
My iPhone 5 was in 50% battery life when it just turned off and it won't turn on and when i plug it to my computer itunes wont recognize it and i cant turn it on
try a reset
-
found olf iphone 4 or 4s in the back of my parents closet. They told me I could now have it back and its been a year since the last time I saw it. It wont turn on unless it is plugged up to a wall plug in. But as soon as I turn it on it says activation required then it says plug into itunes. After I try doing that it plugs into my computer but flashes the apple logo on and off. It wont even turn on all the way when plugged into computer...only the wall. ANY IDEAS?): and no I didnt steal/find this phone. It is mine. I dont have the guts to steal but a lot of people online have accused me.
You may need to force it into recovery mode. See here: https://discussions.apple.com/message/17766427#17766427
-
My iPod itouch when plugged into computer just flashes the apple logo otherwise it just won't start. Try to reset -nothing.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My mac won't turn on and when I plug in my charger the light flickers but it won't charge my mac
It suddenly turned off when I was using it and won't turn on and the charger light flickers and won't charge my mac
If you have another power cord try that, maybe you'll get lucky.
-
Hi!
I purchased my AppleTV in Miami, but I live in Argentina.
I have not been able to get my device running correctly, and altough I've read tons of things online, I still have no solution to my problem.
Here's the thing: after everything's plugged in and ON, I see the Apple logo briefly, then the TV displays a sign that says no signal, check pwoer cords and power source.
But everything is plugged in and connected properly, otherwise, I doubt I'd be seeing the apple logo, right?
I tried changing the HDMI cable, reversing the ends, switching ports, hard resetting the ATV, and trying a different TV. No luck.
I read there is some issue with Samsung TVs, and most LED and LCD tvs down here are Samsung.
On the other hand, I cannot return it or exchange it, since I bought it in the states.
Oh! One of the tvs I tried it on displays a little sign that reads "connected at 1280x720 @60hz", and only THEN, goes to the "no signal" sign.
Please!!! I am being driven up the walls here.... HELP!!Try this:
Change the Apple TV resolution:
Press and hold the Menu and Up button on your Apple Remote for six seconds.
The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals.
Press Play on the Apple Remote to keep the current resolution or Select to manually cycle to the next resolution. -
More information: The iPod ran out of battery late thursday night and I plugged it in to charge. The charging symbol appeared but within 20 minutes, the ipod had gotten very hot and had gained no charge. It hasn't been dropped and it hasn't gotten wet. It's a year and a half old. I use an otterbox as a case, but this problem began three days ago, despite my having been using the brand of case for over a year. It's super important that I find a way to fix this. Help please?
Try the remaining items of:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. The Hotness usually indicates a hardware problem
Apple Retail Store - Genius Bar -
Why does this happen?
Before my phone diedthe screen and everything worked except the phone said Searching... and wouldnt get signal.
i was talking on it just 10 minutes before.
now thisHi Jayroh,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
- Judy -
my iphone 5 died and when i went to plug it in to charge the apple sign came up and it wont go away it has been stuck for 2 hours. i cant turn it off because my lockbutton is broke. what do i do?
Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Get your lock button fixed then you can restore your phone.
-
I tried to update my iPhone 5 this morning with the new software update. Now my phone won't turn on. When I plug into iTunes, it says that my phone is in recovery mode and that it needs to be restored to factory settings. Is there a way to fix this without losing my settings? Why would this happen on a software update?
Zach Doody wrote:
itunes says i cannot update the phone as it is in recovery mode.
That is not what it says. Read the message again. It's telling you it has detected an iPhone in recovery mode and it must be restored.
Restore it. You don't have a choice at this point. -
hi i am having difficulty with my iphone 4s it has been on charge for a number of hours but is just flashing the apple logo continuously i have tried to reset but nothing seems to work can anyone help me please
What is a hard reset? There is nothing in any of Apple's documentation that refers to a hard reset.
There's a reset, a restart, and a restore.
Please explain EXACTLY what you did. -
i cannot set up my ipad because it will not turn on...it is just flashing the apple logo every few minutes. it has never been used...why?
Hi,
Start Here:
http://www.apple.com/support/ipad/ -
Since iOS 7.1 my phone won't turn on and is asking me to connect to iTunes. I connect to itunes and it says it needs to be restored. Not sure why. I try to restore it and then it says something went wrong and it won't work. So I've been without my phone for a couple days now. It gives me error code (29). The phone almost reboots and then 3/4 of the way through it gives me the error message.
If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
NOTE:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Maybe you are looking for
-
Hi We are using 10.1.3.4 SOA n JDev. The MWP files are not opening in Jdev and while opening the project we are getting errors with the following log: java.lang.RuntimeException: java.lang.ClassCastException: java.lang.String at oracle.toplink.addin.
-
How to write a recovery disc in my hp probook 4530s?
i have baught this probook 4530s from Dubai.. and i didnt know how to write a recovery disc in dvds...? So plz help me? or should i get the recovery dvds from hp office?
-
Configuring CWA in distributed environment
Could you please elaborate the process how CWA works in distributed environment?
-
Generating DLL with LabVIEW - A basic question
Hi everybody ! I'm trying to generate a simple DLL with LV. I have read as much as I could on the subject, prepared a small test vi (calculate x*x), built the corresponding dll, inserted and configured the ddl into another vi... Every thing seems to
-
Collective scheduling for planned order
Dear Gurus, i create the planned order using the bapi standard whit the production version , but when create the new planned order the version don't is read in the order, ( BOM + ROUTING ) OF THE version. For read the production version you must resc