So, my upgrade date and contract end dates are the same?

What exactly does this mean? This was my first contract phone and it ends on 9/11/14. My upgrade date is also 9/11/14. Does this mean I HAVE to go pick out new phones and sign a new contract on that exact date? It seems they'd give you a range of dates so you could do it a little early, before your contract really ends. What happens if I don't make it there on 9/11? My service will be turned off?

lreed89
The upgrade date isn't for one specific date, but for that date onward. You're not required to upgrade. If you choose not to, your account will remain active on a month-to-month basis.

Similar Messages

When copying folder to external drive, "An older item named.." appears even when the dates are the same

When I am manually backing up folders from Macbook Pro Mountain Lion to an external drive, the dates for folders are being misread? It will say "An older item named.." every time. I checked the dates and times and they are the same on Mountain Lion and the External drive for the files and the folders. It should send me back a message saying "An item named “” already exists in this location. Do you want to replace it with the one you’re moving?"
When I try to move an individual file to the external drive and the dates are the same, I get the correct message - "an item named "" already exists..." so the issue is only with the folders.
I have only had this issue since the update to OS 10.8. Any Suggestions? thanks

The modification date of a file is stored internally in seconds. The Finder rounds off to the nearest minute. If the age of two files differs by less than 30 seconds, they'll seem to have the same modification date in the Finder.

HT5312 I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

I forgot my security question and my rescue email are the same as Apple ID so cannot reset my security question. Any advice on how to reset m security or add a rescue email ? Thanks

If you don't have a rescue email address then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same.

I have an Apple TV . My husband has an I-pad 2 and I Have an I-Pad 3. When my I-Pad 3 is used we have no problems. However when we try to use my husbands I-Pad 2 video mirrioing lags behind for minutes. We checked settings and both I-pads are the same. What can one do to use the I-Pad 2 without any mirroring lag. Thank you All in advance.

try restarting
both ipad http://support.apple.com/kb/ht1430
and atv
restarting ios devices cure 80% of all troubles users have

My bf has an iPad and iPhone I'm trying to FaceTime and iMessage his iPad but he only receives it on his iPhone what is the problem. His apple I'd and email for FaceTime are the same on his iPhone.

My bf has an iPad and iPhone I'm trying to FaceTime and iMessage his iPad but he only receives it on his iPhone what is the problem. His apple I'd and email for FaceTime are the same on his iPhone.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

My email (sign-in) and password for iTunes is different than my email (sign-in) and password for iCloud. How do I change my sign in and password so they are the same for both iTunes and iCloud without losing my iTunes content?

Hey Lakedrive442,
It sounds like you have changed your Apple ID which you use with iTunes. If so there are several places you may need to update it as outlined in this article.
Apple ID: What to do after you change your Apple ID - Apple Support
Of course some might not apply, but many might.
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

Sold to party and Ship to party are the same but has different address

Hi,
I have problem here wherein Sales order has the same sold to party and ship to party but they have different address. When the customer master data is changed the sold to party in the sales order is also updated but the ship to party is not updated.
I've checked the table VBPA and I noticed that the value of ship to party VBPA-ADRDA is 'E' (manually enetered).
Is this the reason why the address of ship to party in sales order is not updated whenever the customer master is change?
Another question, how does ship to party entered in sales order manually?
Thanks in advance.

Hi,
Please correct me if I have understood the scenario incorrectly which I try to explain below:
Sales order is created where SP and SH both have same address initially and while creating the SO, address of the SH was changed manually by Header>partners>SH
Now master data for that customer is changed for address. As per the standard functionality of SAP, all sales order created for that customer will have new address for SP only.
If address of SH needs to be changed in SO, it has to be done manually by the same way as explained in the above mails.
As far as manually entering the SH in SO is concerned, system will automatcally selects the SH if only one record is available for SH. If you have specified more than one SH, system will give you an option to select one by displaying a pop up.
Please let me know if you find this explanation suitable.
Ravi

All my email dates are the same

I sort my Apple Mail by date and other than it saying recieved today or yesterday, everything else is 01/05/2013
Anyone knows a fix?

Try rebuilding the mailbox.
Mail (Mountain Lion): Rebuild mailboxes

I got screwed again, my Mac suggested I download a newer version of Firefox which I did (3.6) and i ended up with the same problem as last time when I was prompted to try the Beta version (4).

Now I can''t use or access the bookmarks !
How can I go back to the older version that worked ok, except for the theme issues? I've consistently had issues with the themes, I can't get rid of the one I can't see through and have to uninstall it every time i open Firefox. I need a solution or I'll have to delete it for good and go back to Safari!

Might it be that the bookmarks toolbar is hidden.
Please see https://support.mozilla.com/en-US/kb/Bookmarks%20Toolbar#w_show-or-hide-the-bookmarks-toolbar for how to make it visible again.

PLAFX(of BAPI) and AUFFX(PLAF table) are the same???? this is FALG firm ind

Hi Experts,
I am creating PLANNED ORDERS successfully with BAPI_PLANNEDORDER_CREATE, fine.
But, I need to SET the flag for FIRMING, so, when I see the PLAF table its PLAF-AUFFX.........but, when I see in the BAPI header structure of BAPIPLAF_I1, its as FIRMING_IND and componennet type is PLAFX............so, let me know that, If I set the FLAG for this FIRMING_IND........so, it mans am setting for AUFFX?
I mean, Is these booth 2 are same???
thanq

Hi,
Both the fields are same.
Regards,
Prasana

I am running 3.6.12 and my new tab and/or window actions are the same. How can i open new links within apps into new tabs?

I used to be able to control new tab actions such as opening on top of current tab or in a new tab. This is frustrating as i always cover up where I am or was! How can this be corrected so I can open a new tab in a new tab? I am enrolled in an on-line class and can not open tabs in a new tab as needed as it always places the new tab on top of teh current or old tab.
Funny as i use to complain about opening in new windows!
I am missing how to control new tabs and new window actions?
THanks,
William

Do you have any tab related extensions (Tools > Add-ons > Extensions) that allow to divert links?<br />
See [[Troubleshooting extensions and themes]]
Did you ever made changes to the prefs browser.link.open_newwindow and browser.link.open_newwindow.restriction yourself on the about:config page?
See:
* http://kb.mozillazine.org/browser.link.open_newwindow
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction
See also http://kb.mozillazine.org/about%3Aconfig

Dates all the same in e-mail

All the dates are the same in my e-mail. The 'date sent' and 'date received' always read as '29 August 2010'. When mail arrives, it says 'today' then 'tomorrow' then becomes '29 August 2010'. This is despite the date and time setting being correct on the imac. Can anyone help, please?

Double-click on one of the transitions. You'll see a row of controls appear above the preview window, one of which controls the length of transitions. With the first transition still selected, go through the timeline and click each one while holding down the command key. After selecting them all, change the time in the control mentioned above and press enter.
I've not found a way to do the same with the actual photos. I think you'll have to do that individually for each picture, but grabbing the right edge and dragging out to the right to your desired length.

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

Why the delivery date is the same date as 'transptn plan date" & loading date' & ' good issue' & GR end date'

Hi Experts,
why the delivery date is the same date as ‘transptn plan date” & loading date’ & ‘ good issue’ & GR end date’.
in shipping tab i can see Planned Deliv. Time 170 Days ... wat could be the reason.
Many Thanks:
Raj Kashyap

Hi Jurgen,,
Thanks for quick reply!!
But i didnot find any things like that .. what could be the customizing .. and we are using GATP from APO side.
\Raj Kashyap

Remote and direct update of master data at the same time

Hello
Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
Thanks

Hi,
What do you mean by Remote Update ?
regards
Happy Tony

So, my upgrade date and contract end dates are the same?

Similar Messages

Maybe you are looking for