SO_OBJECT_SEND - Email failure notification

Hi all,
I have an issue with Email failure notification. The requirement is if an email is not delivered to the receiver, I need a failure notification to some alias so that the original email can be re send.
The function module used to send email is SO_OBJECT_SEND.
Any pointers on this would be helpful.

Hi,
Check this link. related to receipt notification. (But i am using CL_BCS class)
May this will help you.
a®

Similar Messages

BOXI R2: email failure notification

Hi Experts,
BOXI R2: email failure notification
I have configured email notification delivery options when a job has failed to run.
How to make a job to be failed for development/QA perspective?
Regards,
Sasi

Hi,
If I understand properly, you would like to test if your notification failure is working or not?
In that case, you can for instance schedule a webi report and just before running it, you stop the webi processing server.
The job should failed as there is no webi proc server for processing the report.
Keep in mind that this will impact any webi report that you will try to view or refresh during that time.
Regards,
Philippe

Email failure notification

Hi,
Am using the function module SO_DOCUMENT_SEND_API1 to send emails to the desired users by using my email-id.
Now my requirement is,,, if te receivers email inbox is going to be full or anyother reason for the reason of failure could it be notified to the sender's email address???
I mean,,, if any message sending gets failed... is it possibe to notify back to the sender??
<b><REMOVED BY MODERATOR></b>
thankx in adv!!
Message was edited by:
Alvaro Tejada Galindo

How do i know whether the email has been sent or not to the receiver ? ?
is there any way from the return code of the function module to iddentify whether email has been sent or not...

I'm getting mail delivery failure notifications quoting email addresses I don't recognize. Is someone using my server identity?

Hi. I've been getting several email delivery failure notifications recently. I don't recognize the email addresses quoted. Is it possible that someone has hacked into my mail account?

Either that, or someone is forging your reply address on mail that wasn't sent from your account at all. To tell the difference, you would have to log into your mail account on the Web and check for unusual activity.

PO Failure notification not triggering via Outlook

Hello Experts,
We are using SRM 7.O SP05, When PO is created and by mistake user Input the wrong Email address in Header --> Out put. The user is not getting the failure notification Via Out Look. I can able to find the Error message entry in SOST. I have checked the sender Email address also is correct. (in SU01).
I tried to replicate the same kind of scenario in Q environment. But no failure notification received via Outlook. Is there any setting need to be done.
Kindly help me to resolved this issue.
Regards,
Suneel Kumar

Hi Rick
what tcode i'm going to use to check this event container?
can help me step by step because i'm not fully familiar to this flow..
i check tcode SO16 under Mail sy.grp i check the send to home addresses of users
i test it again in SAP inbox i receive notification under workflow for PO release there's also notification coming to outlook the message is:
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS20000075
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).
instead of for PO releases, how come different notification sending out?
thanks.
Edited by: Marina_25 on Apr 15, 2010 5:16 AM

Report Failure Notification

In doing some searches here and elsewhere I am seeing that the ability to set a GLOBAL failure notification in BO XI 3.1 is not possible... Someone mentions SDK code.... does anyone have any or know where to find any code like this?? I am not technically able to do this and unfortunately there is no one else.
Thanks in advance

Our phantom notification email mysteriously stopped being sent yesterday. I am still curious why, but at least the system corrected itself.
- Wolf Moritz

Sending an Email using Notification Task

Hi All,
How can we send an email using notification task?? Can someone provide me the steps to achieve this.
Is it possible to send email to multiple users at a time??
Thanks.

Good you're on 11.1.1.6. The link in Vlad and copied into my response should help then.
You'd fill in the fields for the to, from, subject, cc, message body using variable(s) you populated upstream in the process.
You're not there yet, but most people struggle (me included) getting the email server set up to send the emails once the process is deployed and running. Here are the steps:
In Enterprise Manager:
1. Expand "SOA" -> right mouse click "soa-infra" -> click "SOA Administration" -> click "Workflow Notification Properties".
2. Select "Email" from the Notification Mode dropdown and enter email adresses for the three fields.
3. Expand "User Message Service" -> right mouse click "usermessagingdriver-email" -> click "Email Driver Properties".
4. Scroll down until you see the email server properties -> enter the appropriate values in these fields: OutgoingMailServer, OutgoingUsername, OutgoingPassword.
Verify that the user(s) you want to send emails to have an email address set. If you are using the default WebLogic security, in the WebLogic Console:
5. Click "Security Realms" -> click "myrealm".
6. Click the "Users and Groups" tab -> click the "User" tab.
7. Click the user id of the user you will be sending email to.
8. Click the "Attributes" tab -> make sure the "mail" attribute has a valid email address. If it does not have an email address, once you have entered it, be sure to hit the Enter* key to have it stick in the field.

HP Officejet Pro 8500 A910 Scan to email failure Error Server Failure Try again Later message

HP Officejet Pro 8500 A910n ( CM758A ) Scan to email failure Error Server Failure Try again Later message
Ran HP Print & Scan Doctor - finds no problems. When sending a scanned document to the user email it has " Error Server Failure Try again Later " message . Can run test to the scanner without any errors. Tried to reset the printer - same result.
Any help would be much apreciated. AHuber

Hello there! Welcome to the forums @TheShadow42 ,
I read about the scan to email issue you are having and I will gladly try to help you! I would suggest checking your scan to email settings from the EWS, and perhaps run the scan to email wizard again. You should also see a scan and test option in the setup.
Here is a link to the User Manual, that has quite a bit of great info. Check out page 62 for the scan to email information.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Change of email address notification

I need to send a change of email address notification to all my contacts. I'll put those in the bcc box. But what do I put in the "to" box? If I put one of them there this name will show up in all the others. If I don't put anything there I suppose many spam filters will throw it out. Any other solutions?

Thanks, iBod. I tried both variations now, but neither work. Cruising the help pages of my new server, it looks like I might be able to contact them and tell them I'm about to send a change of mail address notification and they will open the gates for me for this purpose. Could be good.

Can't access emails in notification.

Hi,
I can't access the emails in notification.
I get the following error
E:YMTI:299 ADDR_PERS_COMP_COMM_GET 0

Hi,
This is the Functional Module which is getting called while executing Email trigger functionality. Please check in User Master Data whether EMail ID has been maintained or not.
ADDR_PERS_COMP_COMM_GET => Get additional user address details not retrived by SUSR_USER_ADDRESS_READ (i.e. email address)
[Configuration for Mail Service|Sending SAP Script Output to Mail & Fax;
Re: Database error for <ADDR_PERS_COMP_COMM_GET> <0>
Regards,
Maheswaran.

Configuring Email and Notifications in SCSM 2012 R2

Hi all,
There appears to be three places to configure email in Service Manager 2012:
- Administration > Settings > Incident Settings > Incoming email
- Administration > Notifications > Channels > Email notification
- Administration > Connectors > Exchange Connector
Could someone provide a quick rundown on what each of these pieces is designed to do, and why they are separated? Perhaps some are even legacy, or shouldn't really be used at all.
Any insights are much appreciated.
Thanks,
Joe.

Yes this is by design, You can't provides access rights on field levels in SCSM. You may use:
1. read-Only Operator: Read-Only Operators have read-only access to work items in their queue scope and to configuration items that are in their group scope.
2. Incident-Resolvers: Incident Resolvers can edit and create incidents, problems, and manual activities that are in their queue scope. Incident Resolvers also have read-only access to other work items such as change requests that are in their queue scope
and to configuration items that are in their group scope.
3. Advanced-Operators: Advanced Operators can create or edit any work items that are in their queue scope and any configuration items that are in their group scope. They can also create, edit, and delete the announcements that are displayed on the Service
Manager Self-Service portal.
Any custom Role will inherit the permission basics from the built-in roles.
Regards
Antoine AL Ibry

RBDMANI2 Idoc Reprocessing IDOC Failure Notification

Hi SAP Friends,
I developed an inbound interface for LIV electronic invoice(MIRO) with basic type INVOIC02. At present everything going smooth.
i scheduled a background job with the program RBDMANI2 to reprocess the failed IDOCS. i.e if any failed idocs required SAP side changes, users will complete the changes. Then the scheduled job will process the failed IDOC.
IDOC will process if corrected data is satisfying else IDOC will fail again with Status 51.
Now the failed IDOC notification we are not getting any notfication.
If IDOC is failing first time idoc failure notification will come. At that point Object Type IDOCINVOIC & Event INPUTERROROCCURREDMM is triggering.
When i am reprocessing through the scheduled job of program RBDMANI2 , i am not getting any failed notification.
Can anyone help me out where i am missing the event. i need to activate any other event linkage for the reprocessing.
I tried with SWELS, i did not get any event when i execting the program RBDMANI2.
Appreciate your help and valuable inputs.
Thanks & Regards,
Srinivas Bhavanam

Srinivas, per my understanding the failure event is only triggered once. You can attest this yourself by executing the associated workflow. If you select the process option and all errors were not addressed, the current work item remains active ; eventually the error message will be changed in case the IDOC is now failing for another reason. There is only one workflow instance for the same IDOC ; the failed batch processing does not generate any new workflow or IDOCs, it only updates the current instances (workflow) and add an entry to the IDOC status table (EDIDS)

Credit check failure notification (11i)

Hi All,
I know there is notification send to the person who creates the SO whenever the SO goes on hold .
But our requirement is the notification should be sent to some other person who is actually authorized to release the hold.
We want to understand if there is a setup through which we can receive this credit check failure notification.
Regards
Gagan

Hi Gagan
As i know, there is no standard setup for notification like that. I think you can utilize Oracle Alert to do so but it need technical skill on it.
Rattina.

Email / Inbox Notifications

Hi everybody,
Got a little challanging problem here. The email connectivity is properly setup in our portal and KM is sending notification emails on all subscribed events etc.
However, i'm wondering if the following can be achieved :
KM Sending emails when a subscription is created
Notifications are not sent via email, but only shown in the recent notifications iview
During subscription "could" eventually choose to force either one of the two - iview or email.
I've looked of course into the Channels and Channel Originators, but it seems that both events (subscriptions & notifications) are risen by the notificator.email originator. This can be changed to NULL or otherwise to prevent the sending of emails and then notifications are only shown in the iview. However, this blocks both new subscription emails and notifications.
Any idea if and how those two could be split ?
Thanks for your ideas
Cheers
D.

yes . with the blog http://scn.sap.com/docs/DOC-31014 , I was able to get MSS (Leave approvals etc) into POWL but not the notifications. i searched on scn, but for notifications i was not able to get into powl inbox.
for MSS, i used the configuration configId=HRMSS_AC_POWL_INBOX
http://eccserver:8000/sap/bc/webdynpro/sap/ibo_wda_inbox?sap-wd-configId=HRMSS_AC_POWL_INBOX and got
but notifications were not appearing using configuration HRMSS_AC_POWL_INBOX.
so tried using the generic configuration IBO_WDAC_POWL_INBOX
but there also notifications are not appearing. so thought of checking in workflow forum.
i was happy to know, if notifications can be viewed in browser without using POWL.
thanks,
Madhu.

IOS DEVICES receiving iCoud Possword failure Notifications

I am submitting this issue for a relative who is unable to use her Apple ID because fails. My cousin owns two IOS DEVICES; IPad and iPhone and is experiencing receiving "ICloud password failure" notifications on both devices. I submitted her issue to the iCloud Forum and received no replies and I hope the iPad Forum can offer some type of recommendation to solve this issue. Several weeks ago she changed her Apple ID password because of a possible Security breach and she believes the change was successful. I recommended she attempt to to change her password again and re-input her information into her IOS devices. When attempting to make the password change, she received the Security Question she originally answered , but her answer this time failed. Can the iPad Forum offer a resolution or a recommendation as my cousn's next step of action.

You have to make sure that Port 5223 is open for your iOS devices
If you support push notifications and want Apple mobile devices to receive push notifications over your Wi-Fi network, you also need to open port 5223 on your enterprise Wi-Fi network. Port 5223 is an outbound TCP port used by the Apple Push Notification
Service (APNS). The mobile device initiates the connection. For details, see
http://support.apple.com/kb/TS1629 .
Technical Requirments for Lync Mobility
http://technet.microsoft.com/en-us/library/hh690030.aspx
- Belgian Unified Communications Community : http://www.pro-lync.be - MCM/MVP/MCT

SO_OBJECT_SEND - Email failure notification

Similar Messages

Maybe you are looking for