SO PO'd GETTING [edited]NO HPSA FOR MY DV& MOTHERBOARD GONNA FRY THANK U!! need version 6.1.12.1

tired of the run arounf reinstallined software framework..4.1.6.1. but cant get HPSA I need my coolsense back...thank for new assisistant just ti screw me out of a cooler machine,,,,,....yeah now a problem posting....
This question was solved.
View Solution.

Hi:
Here is the HPSA version you wanted...
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_99695_1

Similar Messages

How to get the unicode escapes for characters outside a characterset

Hi!
I'm tryiing to edit into a RTF file and have been fairly successful so far. But living outside the U.S i need some characters outside ASCII. Those characters are supposed to be escaped as unicode-escapes, eg \u45. But I can't find a way to get the escapesequense for the unicode-characters that lives outside ASCII.
I'm guessing that this is a very simple thing to do but I have not been lucky with google so far.
So, how do I get the unicode escapes for characters outside a characterset?
Thanks in advance
Roland Carlsson

I'm tryiing to edit into a RTF file and have been
fairly successful so far. But living outside the U.S
i need some characters outside ASCII. Those
characters are supposed to be escaped as
unicode-escapes, eg \u45. But I can't find a way to
get the escapesequense for the unicode-characters
that lives outside ASCII.You are asking about RTF and not java correct?
As a guess....
Unicode is 32 bit (presumably you are not using the newest one.) Thus it requires a 32 bit representation. Thus \u45 actually is the same as \u0045. Thus something like \u1e45 would probably work.

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

I have a question. For the past week I have not been able to access my iTunes app it always kicks me out. I've turned it off and on and still nothing. I was wondering how can I get it to work or what should I do. Thank you

You need a computer with iTunes and an internet connection
Try:
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Where do I get an install disk for my imac.

Where can I get the install disks for my imac 4,1?

Thanks!
Do you think that there is a downloadable version somewhere?

How to get Privacy Policy value for each userprofile in sharepoint 2010?

In userprofile application, we have defined Privacy Policy of mobilephone feild as optional, so every user has option to choose visibility scope of this property to "Everyone/My Manager/my colegues/Only Me" .
Now I am trying to get mobilephone value and their selected visibility option for each user.
I am able to get mobilephone value but I could not get "what each user has chosen as their visibility scope"?

Hi,
According to your post, my understanding is that you want to get Privacy Policy value for each userprofile in sharepoint 2010.
You need to use RunWithElevatedPrivileges method to impersonate user.
To get the get mobilephone policy, you can use user["CellPhone "].Privacy.
For more information, you can refer to:
c# - Getting property privacy with Sharepoint 2010
How to Programmatically Impersonate Users in SharePoint
Managing Sharepoint 2010 Profiles Programmatically
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?

I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
I need a boot disk to get the new hard drive up on board (if I end up ordering that).
Thanks for any help!
Michael

Hi
Please find the link given below might be helpful for your.
http://www.computersurgeons.com/productdetails.aspx?ID=4219
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Western Digital My Book World EditionI have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way i get the message 'There was a proble

I have bought a WD My Book World Edition to use for back-up of my iMac, but when I try and log onto the drive with Apple time Machine (back-up software) or connect in any other way I get the message 'There was a problem connecting to the server "MybookWorld.local" The version of the server you are trying to connect to is not supported. Please contact your system administrator to resolve the problem'
It is a brand new iMac and running Lion OSX
Any ideas on how to solve would be gratefully received?

Followed the directions on this page and it worked!
http://forums.macrumors.com/showthread.php?t=1102423
Part One - Turn on SSH (in the admin panel)
[1] Go to to http://mybookworld.local
[2] login: username will be admin, password will be whatever you have setup. If you can't remember it should be in your Mac OS X keychain (Utilities > Keychain Access, search for "mybookworld"). If you have not changed if from the default the password will be admin as well.
[3] Switch to advanced mode.
[4] From the System tab, pick Advanced.
[5] Enable SSH Access, and click submit.
[6] Click on the network tab and then the LAN button
[7] Make a note of the IP address
Small, maybe obvious, but nevertheless important point: For the install to work, your NAS needs to be connected to a router with internet access.
Part Two - Install netatalk2.2
[8] Open Terminal.app (Utilities > Terminal)
[9] Enter the following command (substitute in 127.0.0.1 for the actual IP address you noted down in step 7), then hit return:
Code:
ssh [email protected]
[10] When prompted, enter the ssh password (will be welc0me).
[11] You are now going to download the installer. Enter the following command, then hit return:
Code:
wget http://mybookworld.wikidot.com/local--files/netatalk2-2-on-whitelight/install_netatalk.sh -O install_netatalk.sh
[12] Once completed, you will need to run the installer. Type:
Code:
sh install_netatalk.sh
[13] You will be asked a number of question during install, answer yes to all. When asked about the "DHX2 login process", I opted to install the modified version, so I can confirm it works.
[14] Once the box has restarted, you should be able to connect to your afp shares and continue to use Time Machine.

How do I get the serial no. for an education edition of cs6

How do I get the serial no. for an education edition of cs6. I try to register but not clear of how?

Have you tried http://www.adobe.com/go/eduverify?

Where do I get my serial number for the free edu edition of dreamweaver

where do I get my serial number for the free edu edition of dreamweaver?

I've never heard of Adobe offering a "free educational version" of DW.
They do offer a free 30 day trial or you can purchase a reduced price education subscription (of the full CC suite of programs) if you qualify.
https://creative.adobe.com/plans
Click on the Students and Teachers tab for pricing.

I sent all the required informations to get the serial number for my Lightroom 5 students edition but this was quite a long time ago, 2 months or so. When do I get my serial number to activate my Lightroom?

I sent all the required information to get the serial number for my Lightroom 5 Students version. This was like about two months ago - so where is my serial number? What do I have to do?

You should be able to see the number in your system files/foldes by navigating to:
Mac:
/Users/[your user name]/Library/Application Support/Adobe/Lightroom/Lightroom 4.0 Registration
Windows
C:\[your user name]\Program Data\Adobe\Lighroom\Lightroom 4.0 Registration

Unable to get automatic event handling for OK button.

Hello,
I have created a form using creatobject. This form contains an edit control and Search, Cancel buttons. I have set the Search buttons UID to "1" so it can handle the Enter key hit event. Instead its caption changes to Update when i start typing in the edit control and it does not respond to the Enter key hit. Cancel happens when Esc is hit.
My code looks like this -
Dim oCreationParams As SAPbouiCOM.FormCreationParams
        oCreationParams = SBO_Application.CreateObject(SAPbouiCOM.BoCreatableObjectType.cot_FormCreationParams)
        oCreationParams.UniqueID = "MySearchForm"
        oCreationParams.BorderStyle = SAPbouiCOM.BoFormBorderStyle.fbs_Sizable
                Dim oForm As SAPbouiCOM.Form = SBO_Application.Forms.AddEx(oCreationParams)
oForm.Visible = True
'// set the form properties
        oForm.Title = "Search Form"
        oForm.Left = 300
        oForm.ClientWidth = 500
        oForm.Top = 100
        oForm.ClientHeight = 240
        '// Adding Items to the form
        '// and setting their properties
        '// Adding an Ok button
        '// We get automatic event handling for
        '// the Ok and Cancel Buttons by setting
        '// their UIDs to 1 and 2 respectively
        oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
        oButton = oItem.Specific
        oButton.Caption = "Search"
        '// Adding a Cancel button
        oItem = oForm.Items.Add("2", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 75
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
        oButton = oItem.Specific
        oButton.Caption = "Cancel"
oItem = oForm.Items.Add("NUM", SAPbouiCOM.BoFormItemTypes.it_EDIT)
        oItem.Left = 105
        oItem.Width = 140
        oItem.Top = 20
        oItem.Height = 16
        Dim oEditText As SAPbouiCOM.EditText = oItem.Specific
What changes do i have to make to get the enter key to work?
Thanks for your help.
Regards,
Sheetal

Hello Felipe,
Thanks for pointing me to the correct direction.
So on refering to the documentation i tried out a few things. But I am still missing something here.
I made the following changes to my code -
oForm.AutoManaged = True
oForm.SupportedModes = 1 ' afm_Ok
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
oItem.SetAutoManagedAttribute(SAPbouiCOM.BoAutoManagedAttr.ama_Visible, 1, SAPbouiCOM.BoModeVisualBehavior.mvb_Default)
        oButton = oItem.Specific
        oButton.Caption = "OK"
AND
oForm.Mode = SAPbouiCOM.BoFormMode.fm_OK_MODE
oItem = oForm.Items.Add("1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
        oItem.Left = 5
        oItem.Width = 65
        oItem.Top = oForm.ClientHeight - 30
        oItem.Height = 19
oItem.AffectsFormMode = False
I get the same behaviour OK button changes to update and enter key does not work.
Could you please tell me find what is it that i am doing wrong?
Regards,
Sheetal

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Getting the first row for each group

Hi Everyone,
I have a query which returns a number of rows, all of which are valid. What I need to do is to get the first row for each group and work with those records.
For example ...
client flight startairport destairport stops
A fl123 LGW BKK 2
A fl124 LHR BKK 5
B fl432 LGW XYZ 7
B fl432 MAN ABC 8
.... etc.
I would need to return one row for Client A and one row for Client B (etc.) but find that I can't use the MIN function because it would return the MIN value for each column (i.e. mix up the rows). I also can use the rownum=1 because this would only return one row rather than one row per group (i.e. per client).
I have been investigating and most postings seem to say that it needs a second query to look up the first row for each grouping. This is a solution which would not really be practical because my query is already quite complex and incorporating duplicate subqueries would just make the whole thing much to cumbersome.
So what I really new is a "MIN by group" or a "TOP by group" or a "ROWNUM=1 by group" function.
Can anyone help me with this? I'm sure that there must be a command to handle this.
Regards and any thanks,
Alan Searle
Cologne, Germany

Something like this:
select *
from (
   select table1.*
   row_number() over (partition by col1, col2 order by col3, col4) rn
   from table1
where rn = 1In the "partition by" clause you place what you normally would "group by".
In the "order by" clause you define which will have row_number = 1.
Edit:
PS. The [url http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions004.htm#i81407]docs have more examples on using analytical functions ;-)
Edited by: Kim Berg Hansen on Sep 16, 2011 10:46 AM

Unable to get the admin object for the CsContainerAdmin service

Hi,
On AIX, we deployed XIR2 SP2 --> XIR2 SP3 --> SP3 Productivity Pack.
The Conection server does show up on the server list in the CMC, but on trying to access this server, it throws an error" Unable to get the admin object for the CsContainerAdmin service"
Tried to manually create another Connection server, same result.
Is this an issue that is addressed by a later FP?
Thanks in advance
Rajesh Jayakumar

Hi Rajesh,
Were you able to resolve this issue? I am facing the same issue with almost every BOE 11.5 SP3 server on Windows.
For example, the Input file server says this -
"Unable to get the admin object for the FileServerAdmin service for server Input.BOCMSMSGT1.fileserver".
Getting the same error on WebI Report Server as well -
There was an error while retrieving data from the server: Unable to get the admin object for the WebiServerAdmin service for server BOPROCENG1.Web_IntelligenceReportServer.webiserver
Thanks,
Sarang
Edited by: Sarang Deshpande on Sep 26, 2008 3:08 PM

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

SO PO'd GETTING [edited]NO HPSA FOR MY DV& MOTHERBOARD GONNA FRY THANK U!! need version 6.1.12.1

Similar Messages

Maybe you are looking for