So the 2.0.2 update only benefits 3G owners?
At least that's what I'm gathering from everything I've heard on here, true? I still have one of the old school/1st generation iPhones...is this update useless for me then?
I am pretty sure that these minor releases contain fixes for back-end functionality for the carriers (new or soon to be iPhone carriers) - there's nothing getting fixed by way of mainstream functionality. Hence people's continuing dissapointment that nothing obvious is getting fixed.
Similar Messages
-
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Installe dnew copy of itunes, now cannot update when propmted after plugging in ipod, says not connected to internet. then trie to go itunes, which was fine. computer is connected to net ....
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
System manufacturer System Product Name
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012AC880C0FDE28
Current user is an administrator.
The current local date and time is 2011-07-06 01:02:01.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA GeForce 7025 / NVIDIA nForce 630a
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: f3716be92491fd1a33f7e647a889bf41
iPodService 10.3.1.55 is currently running.
iTunesHelper 10.3.1.55 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {BDA8D3FD-3CCE-4BCF-A357-0A51184CF67C}
Description: NVIDIA nForce Networking Controller - Packet Scheduler Miniport
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Jul 06 00:38:07 2011
Lease Expires: Thu Jul 07 00:38:07 2011
DNS Servers: 192.168.1.1
Active Connection: (none)
Connected: No
Online: No
Using Modem: No
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-07-06 00:56:50.
diagnostic report. no windows firewall, norton security 2011If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
Cheers, Tom -
i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.
Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
Cheers, Tom -
I can not run the scanner in my main user, but only the second user and the same thing with updating apps! Why is this happening???
Welcome to the Apple Community.
Enter the details of her second account at system preferences> mail, contacts & calendars. -
i got a macbook pro 13 inch core i5 late 2011 , it came with osx lion and i been using facebook videocalls normaly , now i updated to Mountain lion
but when i use facebook video calls in (safari ,chrome ) i see the window box but i only see my self i can hear my friends but cant see em, they also can see me and hear me but i just see me and hear them .
any ideas ?Your wifi problem sounds very much like the problem I had. The wifi would drop out, the icon showed it was still connected. If I turned it off, I couldn't turn it back on. Another user here pointed me to the problem, which was the wifi cable (the flat cable goint from the card to the motherboard). I found it on ebay for $13 and it's been running fine since I replaced it. This is the repair guide for your machine. The part number will be on there if you click the link.
http://www.ifixit.com/Guide/MacBook+Pro+15-Inch+Unibody+Late+2011+AirPort-Blueto oth+Cable+Replacement/7510 -
I have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an error message, that it is for 10.6 only.
It seems that I should have first updated Safari, and then only to Lion, which I didn't. Any idea how I can fix this now without having to rollback to Snow Leopard, update Safari and then go back to Lion?Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test. -
I have two apple accounts, but can only access one. I did all the steps to recover the older account's password but nothing worked. I need to access the older account to update apps. Also would there be a way to just combine both accounts?
Were you able to reset the account's password ? If not then how did you try to get it reset e.g. http://iforgot.apple.com (which would have sent it to the rescue email address if you have one on that account) ? You can also try contacting iTunes Support in your country to get it reset : http://support.apple.com/kb/HT5699
And no, accounts can't be merged nor content transferred between accounts. -
My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes?My iPhone3GS running iOS5 has recently been reluctant to upgrade Apps. The App store asks for my password and then marks all the Apps as being updated. Often only one or none actually update. Usually I get a message saying "Unable to download application" and "<app> could not be downloaded at this time - Done or Retry".
It's not an iTunes login / password issue because sometimes one or two of the Apps will download and the others stall with the blank progress bar. The internet connection is working fine in all other respects.
Sometimes, many restarts later the downloads will complete. Is this a known bug? Is Apple working on it? Any fixes? -
I updated from windows xp to windows 7 and can not get into my itunes account. I get the notice that I am only allowed 5 devices and this isn't a new device just an updated one. How do I get to my itunes?
Take a look at Apple's document for authorizations -> iTunes Store: About authorization and deauthorization.
You can deauthorize all computers from iTunes. All you have to do is click iTunes Store, click your account name in the upper right corner of iTunes, then deauthorize all. -
How to call function behind the button and update only specific record
Greetings,
1 - i wnat to ask few things as i m new to apex, i am using apex 4.1, and created 3 select list and a button in seleting of parameter,
1 select list : select area
2 select list: select product
3- select list - size of the product
i want to generate Ids for the follwing. for that i created query for INSERTING RECORD FROM ONE TABLE TO ANOTHER , generation the ids when button pressed "Generate" after selecting parameters,
Now where i call that QUERY on button ? because when i create button its gives me option to submit, defined dynamic action, etc, pls gudie me where i call the function name id_generation when button pressed?.
2- second thing i creared tabular " select user_id, product_name, product_type from product".
by defualt check box list are create delete submit button are created, first when i insert record it saves that was fine, e.g i entered 50 records and afterward i want to update only one record, e.g there is a record product name = box, if i change it to box small and click submit then it saves all the page means all 50 records,
i want to submit only that record that i changed, for that i use the logic that only those records should be updated which are checked but the user. how will i do this ? where to use the preocess , please guide
Edited by: Omzz on Oct 2, 2012 11:28 PMIf I understand what you are trying to do is correct you could possibly do this by:
Creating and AFTER INSERT trigger on the table based on the tabular form which inserts the record into a seperate table after the record is inserted something like:
CREATE OR REPLACE TRIGGER copy_records
AFTER INSERT ON table a
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
DECLARE
BEGIN
INSERT INTO table b
VALUES :NEW.col1, :NEW.col2 etc......
END;
There is also a way that you could do it within the form using a cursor on the tabular form with APEX_APPLICATION.G_ ......
Chris -
Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month. How do I do this with the new operating system?
Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P. -
How do I update only the page numbers of a table of contents in Indesign CS6?
Hi there!
Please help! I'm making a medical book with more then 1300 pages and about 40 different table of contents.
I want to update only the page numbers on all the table of contents. But I only see the option to update the complete table of contents.
I saw on other forums that this is a familiar and very old problem. Did Adobe already fixed this?hahaha thanks no I won't Using cross-references in the future! but sending the request anyway; nothing ventured, nothing gained!
Thanks again! -
In the middel of updateing my IPod the connectione stopd and since then the device is not working. only white screen no connectivity to win or to the Appstore
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Hi! I just update my apple tv 2nd gen to the new solfware but it only show the itunes icon on the tv and after shows nothing on the tv screen. What i can do to fix that?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)
Maybe you are looking for
-
Mandatory Fields in iView created from SHD0 (sceen variant)
I am experiencing an issue with the Portal display of an (IAC) iView. The iView displays PZ05 and a transaction variant was setup to handle Emergency contact info. I created a screen variant for the second screen of this transaction (screen 0200) i
-
Hello, After resetting factory settings on a cisco ip phone 7905, the submitt button is missing on the web interface. Any ideas on how to get it back? Thanks
-
Regarding VA01/VA02/VA03 - Adding a new field column to the Overview table
Hi, Apologies if this is not the right forum, but I have a request to add an extra column into the main overview screen in VA01/VA02/VA03. The field I want to add is available from the Sales Header Data > Purchase Order Data tab (Ship-to party > Your
-
Generic Icons in One New Folder?
Hi all, I'm having trouble with getting image views to appear rather than generic icons for one recent batch of uploads in Bridge. These are both the Raw files and JPEGs. I'm using a camera and equipment that have not been changed from my recent past
-
Logo (tiff format) for Smartforms
I am having a bmp image but need to convert this first in tiff format . This i am doing through paint . Then , I want to have this image ( tiff format ) as logo of a smartform . So i am uploading the same(tiff image ) from se78 transaction . But ahi