So this is new... InfoPath 2013 on SharePoint 2013: Create a New Custom List, Edit Form in InfoPath, Attempt to Publish and...

InfoPath blows up with an error message saying "Invalid form template"...
No, I do not have any added data connections in the form.
No, I have not added any fields or done any modifications of any kind to the form.
I am doing exactly these steps:
Open SPD
Create a New Custom List
Open List in SPD
Click "Design Forms in InfoPath" (Item)
Form opens in InfoPath 2013
Click Publish (or Quick Publish...doesn't matter)
See error message
This wasn't a problem in my environment liiike, a week ago..? The only thing that's different is that I installed some security patches on the servers this morning...
KB2737989
KB2956153
KB2956180
KB2881078
KB2760361
KB2956175
KB2956183
KB2956143
KB2920731
KB2956181
KB2760554
KB2760508
KB2880473
KB3048778

Hi ramz,
Also you can try to check if there are more useful ULS logs related to InfoPath issue according to the time of this error "Invalid form template" occured, it could help troubleshoot the issue.
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

How to redirect from list edit form to another page using jquery in sharepoint 2013

hi friends i have been trying to find a way to redirect from list edit form to another page using javascript and jquery
i found lot of codes online but non of them are working for me.
what i need is i have to save the data in the form and after that it has to redirect to another page. it has to get the url from hyperlink field of the item.
please help me in this regards

Not sure if you have gone through below links:
http://spservices.codeplex.com/wikipage?title=%24().SPServices.SPRedirectWithID
http://blogs.askcts.com/2013/02/18/using-spservices-and-jquery-to-perform-a-redirect-from-a-sharepoint-list-newform-to-editform/
Please ensure that you mark a question as Answered once you receive a satisfactory response.

SharePoint 2013 witing code to work with a custom list

I am asking this question since I am new to working with SharePoint 2013, but I have programming experience working with C#.net and VB.NET.
I have a workflow 2013 that is accessed by a custom list (and updated by Infopath 2013). Once a user has submitted the custom list to the workflow 2013, there will be the 'proper' authorized person in the company that will approve or reject the request.
Once the user has submitted the request, I do not want them to be able to update the list any more. I want the user to only have 'view' access.
In workflow 2010, I see that there is the impersonate step that would change the permisisons for me. However I would prefer not to use an older version of the workflow.
Thus can you show me and/or point me to links that will do the following:
1. What .net code could I use that will change the permissions on the custom list I mentioned above. The code can be in either C#.net or VB.net?
2. If I am able to use the .net code, would you show me how to 'wire together' the .net code with the 2013 workflow? I do know that I would use Visual Studio.net 2012 to write the code. Would you explain, draw a picture, and/or point me to a url that will explain
to me where to place the .net code so it is connected to the workflow 2013?

I am going have a large volume of users (about 300 to 500) from my company creating these requests. So you are saying that I should create a subfolder of each request.
Thus I have the following additional questions:
1. If I move the requests to subfolders, how will the users be able to able to find their requests when placed into a different subfolder? I have views setup for the users, would I adjust the view for each user? Can you show me in workflow how to move
the requests to another subfolder?
2. It sounds like a need a subfolder for each request is that correct? If not, do I move all requests to one subfolder?
3. Would you show me how you recommend that I change the permissions on the subfolder(s)?

Failed to Sync OneNote 2013 with Sharepoint 2013 - Saying Required Properties option is selected

Hi All
I am trying to integrating OneNote 2013 with Sharepoint 2013, but whatever i do it came up as:
We can't sync because the Required Properties option is selected on the server. Disable the option, or move the notebook to a new location. (Error code: 0xE0000B9B)
I've followed knowledge based and turn off the Required Properties as i can see off, but error still showing up.
Has anyone encountered this error before?
Thanks a lot for any contribution.

HI G_Virus,
Please check if any field is set as required, then set it to optional for the OneNote content type from the problem library.
And also check Jannifer's reply mentioned that compare this content type fields to the OneNote without issue from other site collection or farm per the following post, see if it helps.
http://office.microsoft.com/en-us/onenote-help/resolve-document-library-errors-when-using-onenote-with-sharepoint-HA102647129.aspx
http://social.technet.microsoft.com/Forums/office/en-US/a0e8cb4e-6daa-4ef8-a856-337da837c5db/sync-error-to-sharepoint-2010-library-with-revisions-checkinout-not-enabled
Thanks
Daniel Yang
TechNet Community Support

Error occurs when I open the tasks list in MS Project Professional 2013 from SharePoint 2013

Hi,
I have created a SharePoint 2010 workflow for a tasks list that updates a list item column if the Date Complete <= Today's date & Percentage Complete = 100%
I used 'Set Field in Current Item' in the workflow & the values are updated in the list for the current item.
However, when I open the tasks list in MS Project Professional 2013 from SharePoint 2013, then I get a error "We can't write task - taskname to the SharePoint site. This is either because tasks list is in read only mode or because this task has a column
that requires unique value."
If I remove the 'Set Field in Current Item' in the workflow, then the error does not occur. However, the 'Set Field in Current Item' in the workflow is required.
Please provide solution to this issue ASAP. Your reply will be greatly appreciated.
Thanks in advance

Hi Jack,
A shot in the dark here. I'm not convinced the error is from the workflow. What is the definition of the list item column in SharePoint? Have you set the column to requiring a unique vale? Look at the column definition.

How can I fix the "This is not a test user account, please create a new account in the sandbox environment" error?

Hi there everyone,
Recently I tried to make an in-app purchase, I'm not sure whether the app is relevant or not but it was for Tapped Out, however, after trying to make the purchase I received an error message saying "Sign-In Required, tap continue to sign in to check for downloads [Environment: Sandbox]" so I followed the instructions and was then presented with another error message saying "This is not a test user account, please create a new account in the sandbox environment. [Environment: Sandbox]"
I have been doing a lot of research online trying to find a solution and so far nothing has worked for me, I have also been passing emails backwards and forwards between an Apple Customer Support colleague and are yet to find a working solution.
Here are a few pieces of information.
1. I am running iOS 6.1.3 on a 4th Gen iPod, it's relatively new, I got it for Christmas.
2. My iPod is not, and never has been Jail Broken.
3. I do not have a test account and have never tried to make my own apps.
4. I have tried signing out of my Apple ID, resetting my iPod's settings and signing in again.
5. I have tried resetting my Apple ID password
6. I have tried restoring my iPod to factory settings.
If anyone has another suggestion for something I could try it would be greatly appreciated, thanks.

Yep, I've been reading through other threads on lots of different sites over the last few hours and I can't seem to find a working solution, even though some seem to have worked for other people.
Most of them hadn't been updated in a while so I made my own post to see if anyone has anything new.

Office Web Apps 2013 with SharePoint 2013 Server

Hi All,
I have installed a separate server for Office Web Apps 2013 on Windows Server 2012 VM. I have followed TechNet's article on
Deploying Office Web Apps Server & exactly followed steps.
On SharePoint Server 2013 (Windows Server 2012), I followed TechNet’s article on
Configure Office Web Apps for SharePoint. The Office Web Apps on SharePoint 2013 environment works for
Excel document that shows “View in Browser” but
no Preview.
However, PowerPoint and Word documents doesn’t show “View in Browser”. I thought Internet Explorer 10 has some issue with Office Web Apps and checked on Chrome and results were same.
On SharePoint Server 2013 environment, I have configured 3 services applications, MMS, UPS and Excel Service.
1.) Do I need any other service applications to be enabled for OWA 2013?
I read number of blogs,
Installing Office Web Apps Server for SharePoint 2013 (Steve Mann),
Install Office Web Apps 2013 with SharePoint 2013 (Max Melcher) and Spence Harbar
(Enabling Office Web Apps Preview editing with SharePoint 2013). and all these blogs give more or less same steps that I have followed.
Strange thing is that Excel documents on my SharePoint 2013 sites are working but neither word or PowerPoint documents are not showing option for “View in Browser”.
I am using HTTP and not HTTPS.
2. Can someone please advice how could I solve the Office Web Apps 2010 on Word and PPT?
3. How to can enable preview for Excel, Word and PPT documents.
Thanks you.
Regards,
Aroh
Aroh Shukla

Hi Inderjeet and Olafur,
Thanks for your reply.
@Inderjeet: That site collection feature on SP2010 works on our production environment but on SP2013 site collection there is no OWA feature. Microsoft recommends to have a separate OWA2013 server and what I create
a separate VM for OWA2013 server.
@Olafur: Your suggestion looks spot on. The OWA server does show the discovery:
Our SP2013 development server has limited RAM (4GB) and it think is causing the issue.
Let me check if increasing RAM solves the issue.
Thanks again for your suggestions. (Interjeet and Olafur).
--Aroh
Aroh Shukla

Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment

hello ,,
i have this problem many times why i don't know and i dont have jealbreak " Cydia " ok
the messageis is :
Error Message "This is not a Test User account - Please create a new account in the Sandbox Environment"
how to solve this problem any helpful answer please ?
thank you

The ultimate solution after you have tried restarting/ rebooting your device (no need to hard reset or restore your device) is:
Click iForgot, then reset your password, change it to your new password. Then go to Store, try downloading any app! Hope this will help because some of my friends had this prob before and all what i did was this way!

When i buy thing in app store they alway tell me this is not a test user account please creat a new account in the sandbox environment

when i buy thing in app store they alway tell me this is not a test user account please creat a new account in the sandbox environment

Where are you seeing that? And what exactly are you doing?
Are you a developer? If so, ask in the Developer Forums...

Cannot edit form in InfoPath when list was created in Visual Studio

I am using SharePoint 2013 Enterprise, InfoPath Designer 2013 and Visual Studio 2013.
When I create a list using the SharePoint UI, I can use the "Customize Form" button on the "Customize List" ribbon to customize the list form in InfoPath Designer and publishing the changes works just fine.
When I create the same list in Visual Studio and deploy it via a solution package, I can still use the "Customize Form" button to customize the list's form in InfoPath Designer, but publishing the changes won't work. The error message I receive
reads:
The publish operation could not be completed. It cannot be determined if the form template was successfully published. Try publishing the form template again, or change the list settings to
Catastrophic failure
How can I solve this problem?
Thanks in Advance!

Hi Eduardo, this sounds like a data connection or SOAP issue. Check out the following links for solutions similar to your problem:
https://social.technet.microsoft.com/Forums/office/en-US/ea8da113-fe9a-4878-9994-c1f24cc85c37/soap-error-when-publishing-infopath-form-to-sharepoint?forum=sharepointcustomizationprevious
https://brenthafnersblog.wordpress.com/tag/infopath/
cameron rautmann

Is there a way to reorder or introduce new pages in iBooks Author, without creating a new IBook?

Is there a way to reorder or introduce new pages in iBooks Author, without creating a new IBook? Is this possible?

The main thing is...you have a way to move forward with your project.
If I may offer some tips, learn to customise the template to suit your project...its basically very easy..once you try.Again a search will bring up posts that address this topic.
IF you do create your own template..save it as a template before using it, that way you have a clean version every time.
When putting your book together save versions as you go along..later you can delete them.
If, as .. you seem to have found, you need to change things or want to try other options, you can copy whole chapters or sections and paste in a new order or into another version of your template. If you copy into a different template or book, the template basic also transfer to the template. Best way to discover what can be done is simply open a new book to play with! Add a few chapters and sections...include some pages..and just drag things around, copy and paste where you choose. Its just learning and after you delete the junk!..BTW, yes, you can have single pages before the first chapter...i.e. I open a copyright page into a chapter...that drag it to the top of the book tree, a blue line will appear ..drop it.
If you need any help or advice, its available in abundance on this forum. Have fun...

InfoPath 2013 in SharePoint 2013

Our SharePoint 2013 is run on IE8 - 64 bit. On a site landing page, I had InfoPath 2013 built. There is field of rich text. When I tried to add text in this field, it said that the browser does not support the InfoPath rich text edit control."
Our SharePoint 2013 is run on Windows Server 2008 R2.
Also, couple weeks ago, I was able to edit and to design everything because I am site collection admin, later on, I could not do anything. It is said "an error has occurred with the data fetch."
On the other hand, when I log into server, I was able to edit and design from there. IE version browser in server is IE9- 32 bit.
Can anyone tell me what is going on?
Anna
AnnieLifson

From this article:
http://technet.microsoft.com/en-us/library/cc263526.aspx
Some functionality in SharePoint 2013 requires ActiveX controls. This produces limitations on browsers which do not support ActiveX. Currently only 32-bit versions of Internet Explorer support this functionality. All other browsers have the following limitations.
InfoPath with ActiveX / 64 bit is not mentioned there, but in general only the 32 bit version of IE (and Office in general) should be used with SharePoint.
Mike Smith <a href="http://TechTrainingNotes.blogspot.com">TechTrainingNotes.blogspot.com</a> <a href="http://www.amazon.com/dp/0982899203/ref=as_li_ss_til?tag=tectranot-20&camp=213381&creative=390973&linkcode=as4&creativeasin=0982899203&adid=0cc7a0y6fv2nknxyqvff&">
my SP customization book</a>

InfoPath deployment in SharePoint 2013

Hi,
I am new to INFOPATH development
We are trying to deploy code based infopath 2013 thourgh central admin.
It is getting deployed perfectly, but its getting deployed to 14 Hive folder.
How can we deploy it to 15 Hive folder structure ?
I have tried to deploy a sample infopath form. Even that is getting deployed to 14 Hive.
Are we missing anything?

Hi,
Per the
Office Blog said below, now we can still use the InfoPath in SharePoint 2013.
The InfoPath 2013 client will be supported through April 2023.
InfoPath Forms Services for SharePoint Server 2013 will be supported until April 2023.
InfoPath Forms Services in Office 365 will be supported until further notice.
To collect data using InfoPath form to SharePoint, you can refer to the article below.
http://office.microsoft.com/en-in/infopath-help/submit-and-save-form-data-HA101783379.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Infopath support in sharepoint 2013

hi,
I heard that infopath will not be supported with SharePoint in the future is that true ?
in SharePoint 2013 I can use forms library to submit infopath form to collect data ?
Thanks,

Hi,
Per the
Office Blog said below, now we can still use the InfoPath in SharePoint 2013.
The InfoPath 2013 client will be supported through April 2023.
InfoPath Forms Services for SharePoint Server 2013 will be supported until April 2023.
InfoPath Forms Services in Office 365 will be supported until further notice.
To collect data using InfoPath form to SharePoint, you can refer to the article below.
http://office.microsoft.com/en-in/infopath-help/submit-and-save-form-data-HA101783379.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

InfoPath 2013 Read SharePoint 2013 File data using Rest API Access Denied Exception

I am designing a set of Forms and they need to query Data from among themselves.
The whole set up described below works in the Form Filler/Preview
I'll call them Form A and Form B
Form A has a repeating table that needs to be displayed in Form B
The user selects from a DropDown in Form B an Instance of Form A, using the selected I REST connection is executed so the Form A xml is available inside Form B. The connection is set up as follows:
_api/web/lists/ListName/Items(SelectedId)/File/$value
I publish the form as site content type, add it to a library, after triggering the REST connection I get an error. ULS gives me a 401 Access denied for NT Authority\IUSR (as it should since I don't have anonymous access enabled [nor has that solved the issue])
That's my issue. All requests on the REST api are being executed as anonymous and not as a user that should have permission.
Things I've tried:
1. The connection uses a UDCX file, the conenction is set to use the form server proxy. The proxy has been enabled for the Form Services, web application and user connection. I've tried it with a configured App ID or an Explicit account
2. I've tried enabling Anonymous access, but have had no success
3. I've gotten the Query to work on Post Backs by adding the following to the web.config:
<location path="_layouts/15/Postback.FormServer.aspx">
<system.web>
<identity impersonate="false" userName="bhs\sp_admin_dev" password="M1crosoft" />
</system.web>
</location>
And while it solves the issue for Postback requests and I could add FormServer.aspx to the list I can't use this solution for a production environment, nor can I predict other issues that could be caused by the change.
I haven't been able to find any references to this error so I wonder if I'm doing something wrong or if there's another way to do this.
If I've been unclear on anything, let me know and I'll try to clear it up.

Hi Choggo,
thank you for your information,
regarding this issue, it seems we may need to debug and trace your network, to check if should the parameter that is used for the REST connection is correct.
i checked with infopath team members regarding this issue, they suggest that you try with impersonation, so that the user that login is not anonymous, but the user that you already been assign with.
the last suggestions from our sharepoint team members that we are able to do, as we have limited tools on this forum support, that you need to check the file udcx itself, do the permission to access that file is correct, so for example, if the file is not
having the permission to be read/access then the system may result with anonymous account, so that we may have the result that the data that should be passed are able to accessed.
if should this suggestion not applicable to your environment, our sharepoint team members suggest that you to open an incident ticket, so that we can check and re-confirm more deep for you if should this is an undocumented feature or not. the action
plans is to have a remote session, then we can trace the data passing process, that is already correct, so that the IUSR is not appear when it authenticate.
http://support.microsoft.com/contactus/?wa=wsignin1.0
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

So this is new... InfoPath 2013 on SharePoint 2013: Create a New Custom List, Edit Form in InfoPath, Attempt to Publish and...

Similar Messages

Maybe you are looking for